Cut parts from Objects Blend ?

Hi Designers!
I've made this grid using the Object > Blend mode in illustrator.
But I want to cut some parts out of it.
As you can see in the image it selects more paths then it should (those in the black area need to be untouched, but it auto selects it anyways) I supppose this is because of the effect the 'Blend' has.
How can I cut away those grid lines while still having the (object > blend) effect.
Thanks!
Greets,
Stylow

You could also use Object > Expand to break the blend into all of its component parts.

Similar Messages

Cut parts from song and import them into the sampler on ipad

How do I cut parts of my song in garageband (ipad) and put them into the sampler to fix the pitch on specific parts of my pre-recorded vocals?
For example, I already have a song I recorded, and I would like to simply cut a few seconds of the vocals, go into the sampler, fix the pitch, and then re-insert the editied piece back into my song.
Is this possible on the ipad? I know that the "autotune" option isn't available on the ipad, but I simply want to fix the pitch on a few notes and I was wondering if there's any way to do that.
If there's not, do you have any suggestions or any app reccomendations that might help me achieve this? I can't afford a macbook pro so that's out of the question.
Sorry if my explination isn't clear! And thanks for any help :]

Hi,
you should go to PI 7.1 and not PI 7.0 otherwise it makes not so much sense.
And yes it's possible to migrate your scenarios. If you have UDFs you have to check them because the java version has changed.
Regards
Patrick

Placing objects in Smart Cut Pro from Illustrator

I know in CorelDraw, you can create a contour of the object, break it apart and place it into the cutting program and be able to cut out both shapes. I was wondering if it is possible to do something like that with an outlined object created in Illustrator. Also, can you just copy and paste an object into Smart Cut Pro from Illustrator?

FCP has limited tools for this, because, after all, it is a NON-LINEAR EDITOR, not a compositing or visual effects program. And what you are trying to do falls squarely in that catagory.
Shake, After effects...these are what you need to look for. And ROTOSCOPING...
Shane

Making arc shape cut-out from multiple objects

As seen in the attached image, I want the red arc shape to cut out from the green logo it is sitting on top of, while also having the red arc dissappear and reveal the transparent bg. I have tried a bunch of different ways that I have read from these forums but none of them seem to work. Obviously I'm missing something. The green shield logo is made of multiple objects. The closest I got was the arc shape cut out from some of the objects of the green logo, but not all of them, and the arc shape didn't cut out as an arc, but rather as the original rectangle. The arc is created with a regular rectangle with arc effect.

That worked. So please explain to me what the "Expand" does? I only selected the two objects that make up the shield, which one is a green outline with white fill, and the other no outline with green fill. I was only allowed to do Object > Expand, not expand appearance. What is the difference between expand and expand appearance and what does expand do?
The below picture shows the result I wanted. Thank you.

Can you cut multiple video parts from one video?

Hi.
So like, I have 40 minutes long video. I want to cut this video in 20 parts. Do I have to cut every part separately and save project and than export .avi and do this 20 times for 20 parts, or am I able to mark 20 small video parts from one video in 1 project?
You know, I want twenty 2 minute long videos from 40 minutes video, but I want to find a way how to do it in 1 project, so I can put that project over Media Encoder and go to coffee meanwhile encoder is working.
Thanks,
Jackie Chan

Hello sir. Thank you for fast response. I will check Encore on youtube if you think it is the way this should be done.
Hm, I found some topics which say you can't even cut in Encore, that you need Premiere.
Hm, can you provide some tutorial for Encore to show me how to do this sir?
Thank you

Cut/Paste from Word to Illustrator CS3 for Mac suddenly not working

This issue regards Illustrator CS3 for Mac on a Mac Pro with 6 GB.
Exactly one week ago I created a number of Illustrator files by cutting charts from a Word 2008 document and pasting them into an Illustrator document.
In the past I have dragged the images (or clip art) or simply used Control-C or even Control-X, but by whatever method I opted for, getting the image from Word to Illustrator CS3 has not been a problem.
Yesterday I got a new chart and a request to replace an old image - one that I had created last week on Tuesday by the Drag/Drop or Cut/Paste method.   For reasons I can't begin to imagine the process simply won't work now.
I also find that if I simply select text in a Word Document, hit Ctrl-C and then try a Ctrl-V in Illustrator I don't get to see my text pasted in - ONLY if I already have a text block open and the cursor in place will I get to see the text copied over into Illustrator. This is very strange and not at all how things have worked in the past - typically I would see the new Text Object just appear, and then I could move it to wherever I wanted.
I have opened up a number of old files that I know were created with copied text and also opened the associated Word files (earlier versions of Word) and again find that I can't copy text over, or even move images over - even though I clearly could do this before. I have also tried entirely new files - also with no success.
I was at an Apple one-to-one session this morning and they were more than mystified by this. I can Cut and Paste into Adobe Photoshop Elements, but I can't even cut and paste from Adobe Photoshop Elements into Illustrator CS3.   I can drag the Photoshop file (from the Finder window) into the Illustrator document and poof - get my image that way, but it's as an image only. If the base image in question is a vector image or something else having a plurality of elements, I can't then select the elements in Illustrator to change their color, delete them, or otherwise play with them.
I have brought up a word document on another Mac system that also has Illustrator CS3 and find that it too can't drag/drop cut/paste between the two applications.   At Apple, we did confirm that such ability is operational in the new Illustrator CS4, but none of their store systems still have CS3 to provide yet a third system to test.
I have deleted my Illustrator CS3 preferences, tried flushing the p-ram, and of course run fix and repair permissions - no dice.
My Mac systems update daily and there is nothing in the main update log that shows anything for Adobe or Office (nor do I think there should be). Adobe Update reports that everything is up to date, and I don't see a history file to know what might have changed in the last week.   Office also reports fully up to date and happy.
As I can cut and paste the images into an email for Mail and into Photoshop, I am fairly certain that it is NOT a Microsoft Office 2008 issue. The fact that another Mac with Illustrator CS3 also can't cut and paste suggests that is is really not something personal to my main system.
It is almost as if this is some clandestine "update" intended to encourage me to buy Illustrator CS4. Given that I bought Illustrator CS3 less than a year ago, I really am not eager to buy the new version.   The greeting on the Adobe Support page that CS3 is no longer the current version and therefore supported was most annoying.
I am really hoping that someone out there has an idea of what to try changing, removing and/or adjusting with respect to Adobe Illustrator CS3.

I tried the Select by Path option - can't believe I missed it - and found it made no difference.
I actually uninstalled and reinstalled the whole app. When I tried to simply re-install (can't remember it's exact phrase) it got part way through and then demanded another disk - but I only have one DVD with the application - the extra DVD is for tutorials and it didn't accept that one either. So I restarted that process and chose to completely uninstall. Then reinstalled - hey with only my one disk - gee, just like the first time.   And then it seemed to work.
I was not aware of the save as PDF option - but yes I have Adobe Acrobat Pro 9 for Mac so that option is there - and it seems to work too.
There were of course a slue of updates, and I let them all proceed - but even with them all in place the system is fine and I can once again drag and drop / cut and paste things back and forth.   I just tried a text block and "The Quick Brown Fox" pasted in with a clipping mask about 10 times the size of the document, but other than that it was ok.
So I have things working again on my primary system.   Will try and figure out what's wrong with the other one - but a reinstall might be the easiest game there too.

IMessages to an iPhone occasionally appears with words cut off from end

When sending texts from iMessages to an iPhone, the text occasionally appears on their iPhone with a couple words cut off from the end. It appears fine in the iMessages display/history.   Here's a few things I've noticed:
- It's repeatable. For example, the following message always causes the issue: "man, why are you here? Two are in testing places". On the iPhone it appears as "man, why are you here? Two are in testing".
- It's a problem with iMessages. If I send the exact same text from the iPhone, it goes through just fine. The message has to originate from MacOS iMessages. (I'm using the latest Mountain Lion and all updates as of 12/21/12)
- The full message is actually being successfully transferred to the phone; it just does not display correctly. There are two pieces of evidence for this. If on the iPhone, the user copies the truncated message and pastes it somewhere else, the full message is pasted! Moreover, on the top level the messages app (where you see the last message from all the recent people you texted with), the full message displays.
- It can happen with both short and longer messages.   Here's another longer message I noticed got cut off: "That's funny that you though I was joking when I said I was debugging. Why is that so weird?"
- It has something to do with the length of the message or how it is being wrapped. I can create modifications of those texts with the same length, and they will cut off. (That said, some modifications will not cause the problem, so it's more than just length. Maybe it has something to do with how it wraps the words?) Usually adding a few words to the message will allow it to go through.
- It always cuts off at a space. In other words, it will not truncate something in the middle of a word.
- I have only seen it cut off one or two words before.
Apple really needs to make this a high priority fix. Unreliable messaging of this sort is a deal-breaker for iMessages, IMO. My guess is that they haven't had more reports for this because people simply don't notice unless the last word or two totally ruins the meaning of a text and the other person points it out.
Can people try to recreate this on their machines? If so, please do so and file a bug report (http://www.apple.com/feedback/macosx.html). All you have to do is get on your iMessage app and text one of those two messages to your phone. If it appears truncated on your phone, you've confirmed it. You're welcome to use any of my post in any bug report.

Hi,
some entries had ¬†¬† (tabs probably)
I had seen these in Quicklook at the point where the Message appeared to show double spaces after a Full Stop or Question Mark.
You are right that it have not dawned on me that I had not seen them between words.
It was TextEdit as well (Not sure why I said QuickLook)
29723AE1-6D8B-4932-8353-875164302786man, why are you here?¬†¬†Two are in testing placesn streamtypedÅË Ñ @ÑÑÑ NSMutableAttributedStringÑÑ NSAttributedStringÑÑ NSObjectÖíÑÑÑ NSMutableString ÑÑ NSString ïÑ +3man, why are you here?¬†¬†Two are in testing placesÜÑ iI 1íÑÑÑ
Part of this means the iMessages sent out.
The "repeat" is the sync back from the the ID the iPhone is using.
I am presuming the leading numbers are the iMessage identifier that iMessages uses to tell whether it has been Synced
Messages on the Mac is trying to enclose this in Coloured Balloon (or other style) and lists a Font and it's colour
NSDictionaryïÑ i íÑòò __kIMBoldAttributeNameÜíÑÑÑ NSNumberÑÑ NSValueïÑ *ÑÑ cü ÜíÑòò __kIMFontSizeAttributeNameÜíÑùûÑÑ q† ÜíÑòò __kIMFontFamilyAttributeNameÜíÑòò Arial BlackÜíÑòò&__kIMBaseWritingDirectionAttributeNameÜíÑùû
The sync from the iOS device lists
¢†ˇÜíÑòò(__kIMMessageForegroundColorAttributeNameÜíÑòò #000000ÜíÑòò(__kIMMessageBackgroundColorAttributeNameÜíÑòò #2ba92dÜíÑòò __kIMMessagePartAttributeNameÜíÑùû¢†ÜÜÜ
( A less complicated "Balloon")
It is unlikely to be the Tab key as this changes Fields in Messages (From Text Entry spot, to Search spot, to the "To" spot.)
8:43 PM      Tuesday; December 25, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Hi i am trying to make a cut path from a jpeg i designed in photoshop so that i can cut a sticker on my plotter of the jpeg can you help

hi i am trying to make a cut path from a jpeg i designed in photoshop so that i can cut a sticker on my plotter of the jpeg can you help

Peter,
The cleanest way is to lock your imge, the draw the cut shape with the Pen Tool, set Fill to None and a suitable Stroke Weight. For rounded paths, you ClickDrag Handles out from carefully chosen Anchor Points all the way round, ending where you started. You may adjust the position of the current Anchor Point while you draw by pressing the Spacebar, which lets you freeze the Handles and move the Anchor Point about; you can Ctrl/Cmd+Z to go back, and you may start over. To practise with the Pen Tool, you may try some (outlined) letters from a font with serifs, or any relevant curved path that resembles the desired cut path for the image.
Or, if you have a distinct colouring where you want the cut path, you may Object>Image Trace the image with the right settings (including creating (stroked) paths, then expand and delete everything but the cut path.

Cut text from string

Hello. Is there any way I can cut text from string?
I have responseResult variable which has value: {"success":true,"error":"No any errors."}
I want >>No any errors. << text from that string variable.

Like Varun suggested above, this text is JSON, and you can parse out the various values using JSON deserialising.
If you just want to use standard string manipulation (which I wouldn't recommend unless this is the only string you want to 'cut up') you can use various combinations of string functions.
For example, you could split the string at every double-quote mark:
string jsonString = "{\"success\":true,\"error\":\"No any errors.\"}"; // initial string
string[] strParts = jsonString.Split('\"'); // split string into an array of parts of the original separated at each double quote symbol
string partINeed = strParts[5]; // get the specific part needed
That's not a good way to do this in general (you should add proper JSON parsing), but for a single use it's OK. Note that you have to hard-code which piece of the string you're getting, which is not a safe approach.
Also note I used "\" in those strings so I could incorporate double-quotes in the string.
For more detailed string manipulation read up on RegEx. If you need to parse a lot of these strings in your app use JSON.
I'm a self-taught noob amateur. Please take this into account when responding to my posts or when taking advice from me.
Thank you guys. That solved my problem.

How to use spare part from damaged equipment to a new equipment in SAP

Hello Gurus,
Sometimes we use a spare part from a discarded equipment to make the present equipment functional. How would this be documented in SAP?
Thanks & Regards
Raghuvarun

Hi Raghuvarun,
There will be several methods depending upon the your final objectives of such requirement.
In case you want to just maintain the spare part and the Equipment from which it has been removed, then use Catalog Codes. In the Object part Catalog maintain the Spare part in the Code part and the Equipment number in Item Text.
This method is hassle free.
In case the requirement's like physically identifying the spare-part etc., then the process would be very complex. You need to opt for not only Material Codes but also the Serialization of all these spare parts.
So you need to first consolidate your objectives of the requirement you have asked for. Then post a Query in detail explaining the objectives.
In most of the cases such requirements are satisfied with ideas like the 1st case I proposed, i.e., Catalogs & Codes.
Jogeswara Rao K

Can not cast from object to int

Hi All,
I have the following bunch of code
Session session;
          session = getSessionFactory().openSession();
          Query query;
          int MaxPageId = 0;
          List list;
          try{
               query = session.createQuery("select max(emp.id) from EmpBean emp");
               list = query.list();
               MaxPageId = (int) list.get(0);
               return MaxPageId;
          catch(Exception e){
               System.out.println(e.getMessage());
          return MaxPageId;
The query executed successfully but when i get the max id in a integer variable by the following statement
MaxPageId = (int) list.get(0);
I get the following error "can not cast from object to int"
Please suggest for the same.
-Thanks

Cast to an Integer, not an int, and let autoboxing turn the Integer into an int.
int maxPageId;
maxPageId = (Integer) list.get(0);You can't cast objects into primitives.
Autoboxing isn't casting.
And use Java naming conventions. Local variables start with a lower-case letter.

Post serialized part from free to block stock with a follow up action

Hi,
I try to post a serialized part from free to block stock, but the standard function modules QMLR_FREE_TO_BLOCKED_STOCK, QMLR_FREE_TO_BLOCKED_STOCK_ST2 work good with not serialized parts, but it doesn't works with serialized one.
I create quality notification with serial number reference in RQM00-SERIALNR field, when I execute the follow-up function the M7175 error message appears.
Someone know a solution to this issue?
Thanks
Marianna

Hi The standard FM will not update the serial no for the material. So when you are doing the material movement through follow up action system can not move the material with out serial no. So you can change the functional module aith help of abaper to fetch the data from quality notification field.
Regards,
Smruti

Error when determining a number from object BI_ODS

Error When determining a number from object BI_ODS and number 01 when flat file source system is assigned to transfer rules of infosource , when activating this error occured .
plz need solution.

Hi,
Number ranges can be maintained through the transaction SNRO. For details check:
http://help.sap.com/saphelp_nw70/helpdata/EN/2a/fa02e3493111d182b70000e829fbfe/frameset.htm
Rgds-
Sonal

Error when determining a number from object BI_TSDTEL and number 01

Hi BW Experts,
After Transporting Infosources (Master & Transaction) to BW QA, the transfer rules were not getting activated in QA. The following error message was diaplyed.
"Error when determining a number from object BI_TSDTEL and number 01
Object name can only contain characters from syntactical character set
Object name can only contain characters from syntactical character set
Data element for InfoObject KOKRS 0CO_AREA could not be created
Data element for InfoObject KOKRS 0CO_AREA could not be created
Transfer structure 0IM_FA_IQ_2_SB activated under the name 0IM_FA_IQ_2_SA
It is not necessary to copy dependent objects for transfer structure 0IM_FA_IQ_2_SA
Transfer structure 0IM_FA_IQ_2_SA does not exist
Error RSAR 440 when handling objects with type R3TR ISTS."
I have gone through the Note: 674818.
Could someone clear me about BI_TSDTEl, By using this do we need to maintain object intervals manually in all the systems like BW ( Dev & QA ), R/3 (Dev & QA).
Because I have not seen the Intervals in R/3 ( Dev & QA) systems.
please could someone provide Inputs for this.
Thanks in Advance
Regards
SK

Hi,
Try to see that transfer structure is existing in the sytem which is connecting in
the BW quality.
You need the same to be transported from the development server of R/3 to quality server of R/3.
Just check if this helps.
Regards
Rahul Bindroo

Cannot download Final Cut Pro from the app store

Hello,
I cannot download Final Cut Pro from the app store.
I says "Failed to download" and error has occurred
What is wrong?
is it my Macbook?

I had a problem way back in the olden days, i.e., FCPX 10.0.2, and finally gave up and called the Apple Store using a land-line phone.
Anyway, (this was a couple years ago), if I remember right, they passed me off to someone in the FCPX group and I got the App. However, this was not a really goo way to go because for many updates afterward, everytime I wanted to update I had to go thorugh the same ritual.
Finally, probably around 10.0.8, things got "fixed" and since then I've been able to go direct and download it from the App Store without having to make a phone call.
My suggestion would be to try calling the App Store. Maybe, if there is a "global problem" and they get a lot of calls, they will fix it.
Heck, maybe write a Knowlede Base (KB) article about it.
Disclaimer: I didn't check to see if there was one.

Cut parts from Objects Blend ?

Similar Messages

Maybe you are looking for