Cut position and central person

Hi,
I have the following problem. I develop an entering interface in order to manage the rights users, a user can be entitled to certain catalogues.
I would like to log the validity dates of positions and central persons, i.e a user between 01.01.2006 and 31.07.2006 has some attributes, is attached to this organizational unit, and between 01.08.2006 to 31.12.9999 he has others attributes under an other unit.
How I could make?
Thanks a lot
David WACHE
[email protected]

Hi
HR_CENTRALPERSON_DELETE is working fine.
Can you tell me how to delete position from Org unit. I want to delete it using FM or program.
How to execute this program BUPA_TEST_DELETE?
I gave Business partner as input, but it does not delete...anything. pls guide how to exeute.
Any FM available.
Regards
Chandra

Similar Messages

FM to Delete Position and Central person from org unit?

Hi
In SRM, we used tr-cd USERS_GEN to create position/CP using SU01 user.
In transaction PPOMA_BBP we can see Org unit assigned to position(S) and Central person(CP).
How to unassign or delete the Position and Central person from org unit?
Can you pls tell me any Func Module available.?
Regards
Chandra
Edited by: princeck on Mar 10, 2011 2:54 AM

Hi
HR_CENTRALPERSON_DELETE is working fine.
Can you tell me how to delete position from Org unit. I want to delete it using FM or program.
How to execute this program BUPA_TEST_DELETE?
I gave Business partner as input, but it does not delete...anything. pls guide how to exeute.
Any FM available.
Regards
Chandra

Issue with IT0031 and Central Person and Business Partner (HRALX PBPHR)

Hello
the following issue appeared in our system:
I have two employee numbers (P1 und P2) that I need to link via IT0031 to make sure they have the same Central Person ID (CP). P1 already has a BP-relation (BP1) - the other doesn't.
When I am now trying to save IT0031 I get the message that P1 and P2 can not be linked - but what is worse, P2 (the one formerly without a BP-relation) now has a BP2 even though nothing was saved in the infotype.
It seems to have something to do with HRALX PBPHR because if I switch the parameter off in T77S0 I am able to link the two P (and therefore make sure only one CP and one BP relation exist) - but is the parameter activated it will generate a new second BP even though there is no cause to do so.
Does anyone know how to fix this?
Unfortunately, I can't let the parameter HRALX PBPHR switched off, so I need some sort of work-around. Any help is appreciated.

Hello
thanks for your reply...but the problem ist not the Central Person but the fact that while trying to link two P the parameter HRALX PBPHR in T77S0 generates a new BP for the P that hasn't had a BP relation before.
In IT0031 no changes are saved due to an error message that results from finding relations to an object - that has not been there before. So, somehow I think this might be a bug or something because I see no reason why the parameter would react to linking two P via IT0031. Because the whole idea of this infotype is to copy CP and BP relations from one P to the other. And it works just fine when deactivating the parameter.

New user created. How to create Central Person and Business partner

Hi,
I got a new users created in SRM 5.0 .how to create Central person and business partner.
Without CP & BP we cannot work. please guide.
Regards
G.Ganesh Kumar

HI GANESH
As you aware , assign the user to organisation structure via users_gen , the system will create a BP and Central Person , Position and user for you.
br
muthu

Delivery address and contact person

Hello,
Running ECS SRM 5.0
Business requirement is to have many delivery addresses pr. org unit (which is fine) and a contact person for each of these addresses. How can I enter a contact person on an address or link these?
rgds
GAR

Hi
This can be possible by SRM Web transaction - BBPMAININT (Edit Business Partners)...
Have you used USERS_GEN transaction in SRM to create users ? Please read the SAP documentation in this case associated with the transaction using SRM GUI logon..
Which option do you use in USERS_GEN : file upload ?
In your case where the "US" (User) link is missing: is the SU01 user created ? Wasn't is already created before USERS_GEN ?
If the system is not able to create the CP <-> US relation, you should get back an error message in USERS_GEN.
Please go through the related very helpful pointers ->
Central Person
Re: Error while assigning user to a position
Re: How to assign contact person user id to Vendor uploaded from ECC?
Re: Central Person already exists
Re: Correct relationships not being created from USERS_GEN
Business Partner(BP) and Central Person(CP) distribution
Contact person of vendors created inconsistently in my organizative structu
Do let me know.
Regards
- Atul

Multiple position for one central person and one user

Dear Guru's,
I have a requirement to create multiple position for a existing User - which already has CP Central Person and S Position.
How to create this new position and assign the same CP to all the new positions ?
Thanks and regards,
Anil Rajpal

Hi
Yes you can definitely do this
Create the new position and assign the CP to this position in transaction PPOME. You may find the position first there in PPOME, and then drag-drop the CP over the position to make the assignment. System will ask the percentage of responsibility.......which you will ve to enter...
Regards
Virender Singh

Central Person and Address

Hi Guys,
I'm in ECC 6.0 and SRM Server 5.5. My SRM is Add-On to ECC.I've a problem in Central Person (CP) and Address.
I've created my Org Structure. For all the nodes Business Partner (BP) is generated.
I run the transaction 'BBP_BP_OM_INTEGRATE'. In the Employee field I put in the Employee Number and run the transaction. Then I got the error
1. Error determining address for employee < XYZ >. XYZ is the GUID of a Business Partner address against the business partner in table BUT020.
2. Determination of connection to object 'CP' of 'S' <ABC> failed. ABC = Position of the concerned Employee.
I follow the link below to generate the CP but I could not as I could not find the steps described there.
1. I goto transaction users_gen.
2. I choose 'Start transaction HRUSER'.
3. But I can't see 'Click on copy user& employee data from template' as described in the link below.
So I'm unable to generate CP for my user.
Central Person
Has anybody faced this problem? Please share your experience.
Thanks
Debashish

Hi
To get the Central Person u need to do the following steps once u assign the respective users to the organization unit the CP will automatically created.
Procedure is as follows.
1) Use the T.Code- users_gen
2) Click on copy user& employee data from template.
3) Click on Create users from existing SU01 users.
4) Select the Oganization unit ID and Country and click on continue button and select the radio button of "Area of User" and click on tick mark.
5) Select the respective user from the list and click on check mark.
Check it in the PPOMA_BBP T.code and see in ur organiztion structure the central person will be created with the Id automatically.
Please revert in the event of any query.
Best Regards,
Vijay Mittal
Please award the point if it solve ur purpose.

Position- Central Person relationship not showed

Hi
Relationship between Position-Central Person objects is not showed via trx. PPOMA_CRM, but it is present if trx. BP is used. Could someone help me to solve it, please???
Thanks everybody

Yes
The relationship will get created automatically
B209 Person to Central Person and this relationship will help you to POST the documents into FICO
i Mean without the Creation of this Relationship Posting Document cannot be created and if this relationship is not there in the system means
you will get an error while Hireing an Employee states " No Interval Range Found " but we can hireing the employee
so, this one is mandatory and this relationshipe will get created from $$$$ in Tcode OONR and also check Table NRIV
For more info check the documentation of the follwoing report
RPU46CX_CENTRAL_PERSON_ONLINE

Central Person and Contact person relationship

Hello Friends,
I have HR replicated org.struct.where central user creation was active
I maintained Table T77SO for local user creation
HRALX PBPHR CREATE
HRALX PBPON ON
HRALX HRAC X
Now i am able to integrate user thru users_gen in org.structure but system is not generation central person for the user
I want to form the relation of this user as contact person of vendor , When i try to maintain it system is giving error user is not central person
Please help
Thanks in advance
Diwakar Deshpande

Hello Nishant,
Thanks for your reply,we are using release 4.0
We are not using workflows
My org.structure is HR Replicated and
we want to use Bidding functionality
So i need to create contact person for vendor to login to reply BID
This contact person has to be locally created in EBP and should be integrated
in Org.structure so by maintaining switches i could do so by using users_gen
but since system is not generating central person CP when i am trying to create
contact person for vendor through "Manage Business Partners" its stopping with
error "Central Person is not created for Business Partner"
How to resolve this,please help
Thanks in advance
Diwakar Deshpande

Regarding userexit for pa40 transaction for validating position and persona

when iam entering the position and personal area in pa40 transaction , this position is should matched with personal area of the pa13 screen,and that personal area should match with pa40 presoanl area, for this requiremetnt which userexit is suitable.
please any one worked on this type of requirement please help me on this.

k

[EhP4][Qualifications] Central Person and PA30

Hi,
We switched on the Business Function CA_PA_CE_GE_QUALI that allows qualifications to be linked with the Central Person (and not the Person directly).
The report RHPE_CCE_CONVERT_RELATION migrates old relations (between Person and Qualifications) to the new model (between Central Person and Qualifications).
However, in PA20/PA30, the infotype 0024 does not reflect the changes!
Should we now only use the Portal to update qualifications??
Have we missed a switch of some kind in the customizing (the CE switch is on) ?
Thanks in advance for your help !
Best regards,
Guillaume

Hi,
There is a hard-coded switch you also need to "turn on".
It is located in the CL_HRCE_MASTERSWITCHES=>CHECK_RELEASED method.
For the time being, I simply created an implicit enhancement to set the attribute to true.
Also check the following OSS note : https://service.sap.com/sap/support/notes/1314503
Best regards,
Guillaume

How can user view Central Person ID by Personnel Number and Vice Versa?

Dear Experts,
We are not using Concurrent Employment, but since Talent Management requires to use the Central Person object, we have created the relative objects for the employees. What I want to know is, how can user view the Central Person ID by a personnel number and vice versa easily?
Thanks,
Steven

Not User friedly
This logic is in Function Group HRTMC_PPOM, screens 0700 and 0710.
You can copy it to Z and change search.
In transaction OOFRAMEWORKCUST for scenario TMC_PPOM change Report in "Tab Page in Scenario for each Object Type" from HRTMC_PPOM to new Z*.

Central Person and BP ID

Hi SRM guru's,
I am transfering the data from the ECC6.0 HCM system to SRM.
In HR system they dont have central person and BP ID.
How can we map the central person to each employee who is being replicated in SRM.
Can I assign a number range for the BP id which are going to be gerenrated after the replication.How can be role assigned when the replication is happening. HR system does not have the role details.
What are the check points for replications and what are the fields tobe looked in before replication.
What are the list of mandatory fields that are to be populated and for the user being able to create SC.

Hi
Please refer to the following links ->
Re: How to assign contact person user id to Vendor uploaded from ECC?
Re: Problem with BP. Assignment: Business partner person to user not unique
Re: Central Person and Contact person relationship
Re: Central Person already exists
Re: Creation of business partners - entries of drop down box
Managing Internal Users
http://help.sap.com/saphelp_srm50/helpdata/en/81/0391a5722811d2b416006094b92d37/frameset.htm
Prerequisites for External Requirements
http://help.sap.com/saphelp_srm50/helpdata/en/18/db183d30805c59e10000000a114084/frameset.htm
Technical Description and Configuration Information
http://help.sap.com/saphelp_srm50/helpdata/en/3c/014b03cc304d2ea89d4540dc98b6e3/frameset.htm
Confirming Goods, Services, and Times
http://help.sap.com/saphelp_srm50/helpdata/en/67/63013a53271a05e10000000a11402f/frameset.htm
Invoice and Credit Memo Entry
http://help.sap.com/saphelp_srm50/helpdata/en/dc/3320381c1e6f12e10000009b38f842/frameset.htm
Regards
- Atul

HT5622 Hi, My IP5 when I answer it at home makes this googling sound and the person ringing gets cut off or cant speak.

Hi, My IP5 when I answer it at home makes this googling sound and the person ringing gets cut off or cant speak.
I have spoken to Virgin and their reply was if it does it again contact Apple.
Wondering if this is a common problen and whether the problem is with the phone or carrier. thx

Hey Bidja,
Thanks for the question. I understand you are having issues with calls on your iPhone 5. The following troubleshooting assistant may help to resolve your issue:
Apple - Support - iPhone - Calls Troubleshooting Assistant
http://www.apple.com/support/iphone/assistant/calls/
If you continue to have issues, see the following article:
iPhone: Sound muffled or low from the speaker or when speaking into the mic
http://support.apple.com/kb/TS1631
This article speaks of checking the top microphone for debris. On the iPhone 5, this microphone is located on the back of the phone near the camera flash.
Also, you mentioned this happens when you answer a call at home. I interpret that as it does not happen in other locations, is this accurate? If so, then it may be network related, and you'll want to contact your carrier. If not, the steps included above should help to resolve the issue.
Thanks,
Matt M.

My blutooth headset cuts in and out based on the position of the gen 4 ipod touch, any ideas as to why this is and how to fix it?

When using a blutooth headset with my ipod touch the signal seems to cut in and out. The controls seem to work fine but the audio cuts out when the unit is moved or placed in my pocket.

Could be interference
AirPort and Bluetooth: Potential sources of wireless interference
Try:
- Reseting the BT headset
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset network settings: Settings>General>Reset>Reset Network Settings. You will have to rejoin all wifi networs and re-pair all BT devices

Cut position and central person

Similar Messages

Maybe you are looking for