'Cut to new layer' function for pixel selection.

hey guys. This is a pretty minor feature, but it might be handy.
The feature would be a single comand that could remove pixels from one layer and paste them into a new layer.
CTL-X technically does this, but since CTL-X clears the selection, the paste has no guide in order paste the pixels into the same location.
CTL-C, DEL, CTL-V , has the effect of cutting pixels from one layer into a new layer while preserving the selection, but it would be nice to have as a single command.
The obvious shoice would be CTL-SHIFT-X, but that's liquify, and I like it there.
So, I propose ALT-SHIFT-X. I know that the alt-shift combination is never ever used, but honestly, it's not a really importnant feature either
Thanks for reading.

Already there - control J (new layer via copy) and control Shift J (new layer via cut) - which is exactly what you have asked for. To redload the selection you can simply control click the new layer - mostly you WOULDN'T want to do this, since it just gets in the way. You could reassign them if you wanted.
Do you seriously think that photoshop version 11- wouldn't have this shortcut by now? These ones were there back in 4 or 5 at least

Similar Messages

TPM44 - new accrual functionality for OTC deals

Hi,
We have EHP4 and still use the TBB4 transaction in order to calculate accrual for MM transactions. What should we do to work with the new accrual functionality for OTC deals released in the new version of TPM44?
I know that accruals/deferrals flows for OTC transactions that we executed with the old accrual/deferral function (transaction TBB4) in an earlier release, first need to be migrated (TPM migration). But I don't know how to start. Do I have to activate a business function? How I turn the key in order to not use any more TBB4 and start use TPM44 for MM transactions?
Regards,
ZucoGuti.

Hi,
Before executing migration program, please check whether Treasury business functions (FIN_TRM_LR_FI_AN & FIN_TRM_LR_FI_AN_2) are activated or not in SFW5.
Also as a pre-requisite to do above activity, FINSERV component must be with 604 (EA-FINSERV 604)
Once above checks are completed you can run migration program which will regroup/change the configration for interest accrual in different places to single area under Accounting->Accrual Deferral Settings
Regards
Prasad AV

New preview function for iPad–error message "Multiple page sizes not supported"

When I try to use the new preview function with my iPad I get the error message "Multiple page sizes within a layout are not supported". I have a page that is 768 x 1296. I would really like to preview this folio before publishing. Any suggestions?

If you're trying to create an article that scrolls vertically, you can create a 768x1296 article in a 1024x768 folio, but you need to select a Smooth Scrolling option when you create or import the article, or in the Article Properties dialog box.

Creation of new partner function for VENDOR

Hi,
I've a requirement to create some Partner functions for vendors while creation of vendor. Some Partner functions are available by default and some we need to add. but while doing a BDC we are not able to find how many of them are available or where to put the new Partner function?
Please let me know, if there is any BAPI availble..
Regards,
Anupam

Try below LSMW batch input method its very esay to upload data
Object               0040   Vendor master
Method               0001   Standard
Program Name         RFBIKR00
Program Type         B   Batch Input

Partner Segment as part of New GL function for consolidation purpose

Dear SAP colleagues,
I have the following questions around Partner Segment as part of the New GL function:
1. Has anybody added partner segment (Field PSEGMENT) to the Coding Block as part of the New GL function yet?
2. Can we display or add partner segments on all relevant postings?
3. What other alternatives exist for consolidation in BCS lower than company code?
4. Who has some documentation around why partner segments should be added to the coding block?
5. Who has business requirements for adding partner segments and documentation?
In advance thank you very for any help that can be provided.

Hi Partner segment s required if you prepare consolidation for segments. This field can help the consolidation system to identify inter segment transactions for profit elimination. Trading partner field is used to identify Intercompany Postings and it will help legal entity consolidation.

New partner functions for datasource 0CRM_SRV_IBASE_ATTR

Hello,
in note 874267 is described how to implemention new partner function in datasource 0CRM_SRV_IBASE_ATTR. But i doesnt know how get the structure iba_partner in the badi. Is there are function modul simulare like CRM_BADI_GET_BDOC.
Regards
Sven Sende

Hi Pramod,
SMQ1 will only show an entry, when there are available data for the delta queue, i.e. someone has made a change or added new data.So checking RSA7 and SMQ1 will give the same result, if RSA7 shows more than 0 entries.
The problem may be the init. What init did you do: an init with data, or an init without data, or an init with a filter. Experience with our CRM system tells me, best way to initialize any CRM data is to do a full data init (without filter) or a init without data (without filter). I wonder about the FULL load you mentioned ? When did you do it ?
Kind regards,
Jürgen

Why is there no functionality for multiple select of continuous icons in icon view?

I have just switched to my first mac. I admit I am experiencing growing pains switching over from a PC. I am already overcoming many of these, but I have one issue in particular that for the life of me, I don't know why apple engineers left out.
Why is it that I can select continuous multiple items by clicking "shift + first icon" and "shift + last icon" in the finder in list, column, and cover flow views, but NOT in the icon view?
I realize a work-around for this would be to use a selection box and then to de-select the images I don't want. This is the best option I have at this point, but honestly, I am extremely dissapointed that I have to even have a "work-around." Simply put, this should not be an issue.
I prefer icon view when superficially browsing my photos because I can see all my photos at the same time and change the thumbnail size. There is no view besides icon view that has easy access to changing thumbnail size. Therefore, there is no view at all that offers the functionality of changing thumbnail size AND selecting multiple items. This functionality is standard in PC operating systems for icon view. The multiple select in combination with changing thubmnail size is also extremely useful for me when transferring select files to external devices. For example...I may be giving files to a family member on their jump drive. As a teacher, I am often exchanging jump drives with other teachers for class photos, documents, etc., and being able to visually spot the items I want and to use continuous select is sometimes the easiest way to search within a folder.
I called in to apple technical support and most of the people I spoke with were surprised to see that this functionality had been "left out" of the icon view in the finder.
If the multiple select functionality cannot be added to icon view, it would be nice if the slider for changing thumbnail size was available in list or column view. That way, I could at least have multiple select functionality in conjuction with the option of enlarging items.
Please participate in this thread if you want this functionality added to the finder icon view!

Matthew Morgan wrote:
PVfanatic wrote:
I realize a work-around for this would be to use a selection box and then to de-select the images I don't want. This is the best option I have at this point, but honestly, I am extremely dissapointed that I have to even have a "work-around." Simply put, this should not be an issue.
I don't think that Apple thinks that's a workaround. It is the way one goes about selecting multiple icons.
It's a Mac/Windows difference that can be frustrating to new comers to the Mac. I can promise you that, with time, you'll get used to it!
Still, as macjack suggests, let Apple know what you think.
Matt
It may be a Mac/Windows difference, but Apple are not being consistent with their UI because in both Aperture and iPhoto you can do Shift-click to select multiple items in thumbnail view which, apart from the name, is the same interface type as icon view in Finder.
Like the OP, I find this frustrating, not because I use Windows as well (at work) but because of the above and because it just seems illogical not to be able to do this when you can in all the other views in Finder. Oh, and Linux allows Shift-click multiple select too.

Using the new EPMDriverBasedRefresh function for What-if Analysis

Hi,
A new function is available that supposedly enables easy what-if modelling in BPC. This sounds great because currently for what-if analysis, you need to duplicate data in the database (using differnet categories or data sources) which can be time consuming and impact overall performance.
Has anyone got any experience with this EPMDriverBasedRefresh function? There is some documentation on SAP's userguide but there are no specifics on the type of logic that is supported for scenario outputs i.e. is it only Member Formula Logic (Account 1 x Account 2 = Account 3), or can it support more complex scenarios such as running through Default Logic (and any BAdIs you may have) to retrieve the modelled output? (This would be awesome!)
32.20 has the detail in the userguide: https://help.sap.com/businessobject/product_guides/boeo10/en/EPMofc_10_user_en.pdf
and it says:
"This function enables you to refresh specific rows or columns of one or more reports, based on a specified range of data drivers whose values you can modify.
Additionally, you can specify to refresh a whole report that is outside of the specified range of data drivers.
This function can be used for example for what-if analysis."
My testing has found that it does not run default logic (where our driver-based calculation BAdI is called).
Any experience from fellow SDNers would be much apprecited! Otherwise I'll put a call into SAP to get the documentation expanded a little.
Cheers,
Nick

Hi Nick,
It looks like this function only deal with the report refresh with multiple reports in one workbook...
Not extremely useful. If I am wrong, please correct me.
Vadim

Need update function for datagrid selected item

Hello -- I'm using CF+ Flex+ FDS to connect and modify data.
I am building a form that info is entered into, and then inserted
into my database using a the wizard CFCs to insert records. That
data is then displayed in a datagrid with the rest of the data in
the db. When I need to update the info, I select the record from
the datagrid and it populates my update form fields. However this
is as far as I can get. I do not know how to write the update
function to take the changed values of the update form and update
the db with these values.
I know the datagrid has an edit feature, however the field I
need to update is not going to be a column of this datagrid. So I
need to do it via a form where I can assign a value to the field.
Currently i am inserting and deleting records using dataServices
with an arrayCollection. Any help on an update function would be
great, thanks

Have your form elements update the associated model
(DG.selectedItem) field. On change is often good for this, or
focusOut. Perhaps flag the item as modified, so that you can loop
over the dataProvider to extract the modified rows.
Then send the modified rows to the server as an
ArrayCollection.
Tracy

How do I use the new search function for ipod?

itunes 7.0 and ipod is up to date:
when i scroll through the music, i get the nifty little grey box with the letter in it, but how do i get to the search where i use the click wheel to input a query and search through all items in my ipod?

Unless your iPod is one of the recently announced upgraded 30GB or 80GB iPods, you don't have the search function. It was not added to existing devices in the recent update. It may or may not be added in some future software update but there's no official word on that.

Why do I get a "no pixels selected" when making adjustments in a new layer?

What am I doing wrong? I want to modify or replace the color in a selection, so I make the selection, create a new layer, and try to replace the color from the Enhance menu. I get the message " can't do it because no pixels are selected." The selection is OK; I can see the marching ants. The same happens when I try other color adjustments and probably other adjustments as well. Would appreciate some help. Many thanks.

Sounds like you have an empty layer selected.
Even if you have a selection established (showing the marching ants), your creation of a New Layer means that your selection is now on that new layer, which is empty, and thus there are no pixels selected to modify.
Try skipping the New Layer step.
Or, duplicate the layer you want to work on, then do the selection, then the adjustment.

White line appears after cutting selection to new layer?

i cut someones face out using the laso tool and placed it on a new layer via cut to new layer. now it seems to show a white line around the area where i cut it? why is this?
Thanks.

When using the lasso tool as in your example uncheck
antialias in the tool options bar before making the selection.
MTSTUNER

How do you copy & paste a shape that is part of a "combined shape" to a new layer?

How do you copy & paste a shape that is part of a "combined shape" to a new layer? For instance, I have a combined shape of 2 rectangles (not merged) and I want a copy of one of those rectangles as a new shape layer. I know I can duplicate the entire layer and delete the shape(s) I don't need - but I was wondering if there was an easier, more straightforward solution.

Hi,
What version of photoshop are you using?
In photoshop cs6/cc you could use the Path Selection Tool to select one of the paths and then Layer via Copy
(Ctrl+J or Cmd+J)

I want to make a new layer of multiple items on multiple layers...

Hello,
This is probably easy, but I can't figure it out.
I have a multi layered document and I don't want to flatten things to do this.
Sure I can go the long route, but there has gotta be a better way that I just
do not know about.
I have drawn a selection with the marquee tool. But the items this selection includes are all on separate
layers.
Without merging them, how can I make a new layer out of this selection?
I'm on CS4
Thanks
Nikki

Stamp multiple layers or linked layers
When you stamp multiple selected layers or linked layers, Photoshop creates a new layer containing the merged content.
Select multiple layers.
Press Ctrl+Alt+E (Windows) or Command+Option+E (Mac OS).
Stamp all visible layers
Turn visibility on for the layers you want to merge.
Do one of the following:
Press Shift+Ctrl+Alt+E (Windows) or Shift+Command+Option+E (Mac OS).
Hold down Alt (Windows) or Option (Mac OS), and choose Layer > Merge Visible.
Photoshop creates a new layer containing the merged content.

Selection variable for dynamic selection in QE51n

Hi All,
I have a scenario were we have a repetitive Manufacturing and we create one insp. lot of origin 13 and keep creating insp. points for days, so my user wants the insp. points to be displayed only for the past 3 days based of the Date Insp. point identifier which is one of dynamic selection criteria under insp. points, I see with other transaction I can do selection variable on dates for dynamic selection fields but I cannot do that in QE51n, I can do the same in QE51 but not in QE51n, can some tell me if there is a OSS or other way to get this working.
I appreciate your help.
Thanks,

Hi Srikant,
I think you can meet the requirement in QE51N also.
In the screen for QE51N :Result Recording Work list", Follow this Path,,,,,,,,,
Edit--->Dynamic Selection.
The system will pop-up new small window for "Dynamic selection for insp. lot and operation" here I there is one folder is available named "Inspection point " which is having the selection criteria "Inspection point", double click on it and enter the desired values.
Regards,
Shyamal

'Cut to new layer' function for pixel selection.

Similar Messages

Maybe you are looking for