Cuts from Screen Recording do not export properly

I did a simple screen recording using Quicktime X. I used Mpeg Streamclip to convert it to the codec of my timeline. I inserted a few short cuts from the screen recording. Everything looked great. However, when I export the timeline, the cuts from the screen recording do not export with the set in and out points they were cut to. The cuts, and only the cuts, from the screen recording seemed to shift in time. Its as if FCP did a random slip edit to the screen recording cuts. really weird.
I then exported each cut to an individual self-contained quicktime file, and I got the exact same results. And the shifts in time were also exactly the same. really weird. Did Apple put some kind of restriction on using the screen recordings in FCP??
any suggestions on a workaround?

I sorta found a workaround myself. Instead of converting the entire screen recording clip in Mpeg Streamclip, I simply set the specific in and out points I wanted in Mpeg Streamclip and exported the clips that way. Once in FCP, there was no extra footage for the random slip edits to occur and the final export looked as it was intended. I am still interested in any other possible solutions.

Similar Messages

Does Premier have an Screen recorder if not does adobe has one in the Cloud ?

Basically Does Premier have an Screen recorder if not does adobe has one in the Cloud ?
Thanks !

Adobe Captivate is the one but it's not in the Cloud. Camstudio is also very good at that.

Screen painter is not working properly.

Hi,
when i execute se51 the screen painter is not coming properly.
some dotted line coming and throughing the below message.
EU_SCRP_WN32 : timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
i am using sap gui 710 final release with patch 7.
can plz suggest wht should be the problem.
Regards
deepak

Hi Deepak,
As Ashutosh said, please post the thread in the ABAP forum. Do not create a new one.
Moderators,
Please move this thread to ABAP forum.
For the time being, refer the notes: [204910|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=204910], [885581|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=885581] and [101971|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=101971]
Regards,
Srihari

Photographs uploaded to Behance from Lightroom 5 are not oriented properly. What can I do?

Photographs uploaded to Behance from Lightroom 5 are not oriented properly. What can I do?

Hello,
Thanks for writing. The photo will be oriented exactly as it is uploaded, as we have no rotate feature. Before uploading, please open the file and make sure that it is uploaded in the orientation that you would like. If you're still having trouble (i.e. your image looks correct before you upload it, but is rotated incorrectly on Behance), your original file is likely not showing its true orientation. Please try saving the file again, or making a duplicate and saving that before uploading.

I am facing a new problem after a missed call. i phone will get freez on its lock screen after a miss call. Its seems that its main screen touch is not working properly. This problem occurs after each and every missed call.

I'm using iphone 5s with ios 7.1.2 & I am facing a new problem after every missed call. i phone gets freezed on its lock screen. It seems that its main screen touch is not working properly. It should be bug introduced by apple . This problem occurs after each and every missed call .There is no patch announcement for this issue yet. There are few workaround to fix this issue: Reboot your iphone. But its irritating to reboot the phone frequently after each issue....

Hello dipthebe,
Check out the articles below go through troubleshooting steps for your iPhone when the screen is unresponsive. You may want to try and restore your iPhone as a new device and then test out what happens when you miss a call to see if the issue is still present afterwards.
iPhone, iPad, iPod touch: Troubleshooting touchscreen response
http://support.apple.com/kb/ts1827
Use iTunes to restore your iOS device to factory settings
http://support.apple.com/kb/HT1414
Regards,
-Norm G.

After the 10.9.3 update my Adobe Premiere does not export properly.

After the 10.9.3 update my Adobe Premiere does not export properly. Someone HELP!
Can anyone help?
Thanks!
<Edited by Host>

Having the same problem yesterday I spent 2 hours
Contacting tech support Apple and Adobe.
Apple says clearly that it is Adobe responsibility
and Adobe tells to contact Apple...
And none of the companies are telling when and if there will be a fix.
I'm ready to go back to PC where hardware companies
are not trying to boycot software companies. That's my opinion.
I already lost one job because of this.

Lately pdf files from the Web do not display properly; what is wrong and how can I fix it so I don't have to use IE?

I am a professor and frequently need to open pdfs of academic journal articles from electronic databases. Within the last two or three weeks, when I try to do this using Firefox, only the first page of the pdf displays and the rest are blank. In addition, a bar appears across the top with the message "This pdf file may not display properly." So I have had to switch to Internet Explorer to open the files and do my research. What is going on and how can I fix it so I can open pdf files from the Web in Firefox and have them display properly?

My question is simple - why would you put an application in production that has a lot of bugs? To replace a good and steady Adobe product? My customers will believe that I put a pathetic fallible form online. They are not sophisticated on computers so I just tell them to use IE. Ugh
I must agree with pgwebgirl!

I am trying to export a slide show from iPhoto with music from iTunes. it will not export the music file because i have not enabled iTunes plus. how do i do this?

i am trying to export a slideshow from iphoto using a song from itunes. an error message comes up and say it will not export the song because itunes plus has not been enabled. how do i do that?

It sounds like you tune is an .m4p file - p=protected and has DRM.
Previously you could get the + version which was a .m4a file with no protection/DRM.
The + option has been replaced with iTunes Match - $24.99 a year.
A better option if you have a .m4p file would be to repurchase the .m4a version from the iTS unless you want to update your entire library with iTunes match.
MJ

Nice MOV from Screen Recording - Import to iMovie looks degraded

Hi,
I am wondering why I have a great MOV file from a Mac screen recording program, with audio, and this looks fantastic when viewed with Quicktime.
Then I import into iMovie and it looks much degraded.
I don't use iMovie a lot, but I figured MOV quality should look the same when imported into iMovie.
Any help greatly appreciated!

Welcome bdemil to the  iMovie boards ...
some misunderstanding:
iMovie is meant for PAL/NTSC content.. any other formats/resoltuions get converted = loss of quality..
and: .mov is nor format, just a container; your Mac can display many codecs.. but only very few 'fit' into iMovie..
I mostly doubt, any screenrecording fullfills the 'video' standards.. (interlaced, framerate, resolution...)
for handling off-standard videos, QuicktimePro or MpegStreamclip offer some basic editing features...

Slow transition from Screen Recording back to Captivate Tool

I am new to captivate so excuse me if I do not know all the training/tool jargon yet.
I am trying to do a screen capture of a web based tool to train a client. I have done a few of these, and they worked pretty well, but longer recording seem to bog down. Obviously this makes sense, but the current recording is taking forever and I can not tell if the software is locked up or working. I just get the spinning ball on the mac when I try to bring up Captivate.
It seems like in the past if I hit Command Return, it started closing the recording. In the past when it acted like it was hanging up, I would just click to open Captive and it would show me a that it was working. Currently I am not getting that when I bring up the captivate software. I still see the red outline for the recording area and this has been 30 minutes or so. Is it possible that it is still working or do you think there is a problem?
The screen recording was long, but this seems really long to transition.
So I guess I need to know if this is common. And second what I should do now? Should I let things run over night or is the tool still recording? If so this could just keep recording and fill up the hard drive (I guess).
Any ways to cancel the recording if it is still recording? Is there any way to check this? Is there a realistic (or estimated timeframe) to wait for this transition? For every minute you can expect to wit 2 minutes to finalize and move the recording over to captivate (or similar). Is there another way to end things or know what is going on?
Any advice would be greatly appreciated.
Thanks.
Maybe I should do screen recordings with quick time and then add audio in captivate. Thoughts?

What are you upload/download speeds at each location?

Datas from info record should not overwrite BAPI_PO_CREATE parameters

Hi,
I intend to pass the netprice value while posting PO through BAPI_PO_CREATE.
but the values from info record overwriting the parameters supplied.
Please guide me how to avoid this overwritting.
Thanks,
Vempalli

and have you set a breakpoint at loop at input file and at bapi_po_create ??
perhaps there is something wrong with the amount of items passed ?
kind regards
arthur

Illustrator not exporting properly

After exporting a gradient the color didn't seem to be exported properly:

Yes, it's a gradient on a stroke. I think you helped me make it. I saved or exported it under just about every type of format and they all seemed to have those white triangles. I fixed a JPG version in photoshop with the content aware tool but if Illustrator has a bug I thought I should post it.

Exporting to PDF from rpt file and charts within not exported properly

I am having issues when export .rpt file to pdf report using crystal report java. When exporting from Crystal Report, it displays the charts and boarders properly but when exporting using Java application the back ground colors and boarders disappears or fades. It makes the report look unprofessional. I am using version 2.0.
Looking at this release note at the this link (http://www.businessobjects.com/products/dev_zone/eclipse/cr4e-updates-readme.pdf ) I see a reference to "JRC SDK RTF exporting is not consistent with CR RTF exporting" has been fixed in Release Update 8. I tried the latest release but it seems it has release update 4 only. So, my question is where do I get Release update 8? I am hoping that will fix my issue or if anybody has any suggestions that will help me resolve it. If you can reply at your earliest, I would really appreciate it.
Thanks for your help in advance.
Edited by: selomabebe on Jul 6, 2010 8:18 PM

Here is snippet of code how I am exporting rpt file to pdf file. I didn't include every code here but I am hoping this will give you the idea. Please let me know if you need more info.
public byte[] runReport(RPTParameters para) throws SQLException {
byte[] reportData = null;
ReportClientDocument reportClientDocument = null;
try {
     reportClientDocument = new ReportClientDocument();
     reportClientDocument.setReportAppServer(ReportClientDocument.inprocConnectionString);
     reportClientDocument.open(ReportDataConstants.CPS_RPT_FILE, OpenReportOptions._openAsReadOnly);
     ExportOptions exportOptions = new ExportOptions();
     PDFExportFormatOptions pdfOptions = new PDFExportFormatOptions();
     exportOptions.setExportFormatType(ReportExportFormat.PDF);
     exportOptions.setFormatOptions(pdfOptions);
     ParameterFieldController paramFieldController = reportClientDocument.getDataDefController().getParameterFieldController();
     paramFieldController.setCurrentValue("", "@ba", para.getBusinessAgreement());
     paramFieldController.setCurrentValue("", "ReportMonth", para.getMonth());
     paramFieldController.setCurrentValue("", "ReportYear", para.getYear());
     InputStream reportInputStream = reportClientDocument.getPrintOutputController().export(exportOptions);
     reportData = new byte <reportInputStream.available()>;
     reportInputStream.read(reportData);
catch (ReportSDKException e) {
finally {
return reportData;

How to make the price in PO to adopt from info-record and not changeable?

Hi Xperts,
Can somebody explain to me how to set the PO price to be adopted from the info-record and is NOT CHANGEABLE at the creation and change of PO screen. I know that i can configure the field selection for the PO type to be "price as display" only. Any other solution?
Thanks.

Hi!
tick the check box info-update at the item detail under master data tab in a PO.
its significance is as follows:-
Info record update
    Determines whether the prices and conditions of this purchase order item
    are suggested in future PO items.
Use
    Selecting InfoUpdate causes one of the following situations to occur:
        -   If just one info record (with or without plant) exists, it is
            updated.
        -   If no info record exists and "plant condition requirement" was
            specified in Customizing, an info record with plant is created.
            Otherwise, an info record without plant is created.
        -   If two info records exist (that is, one info record with plant
            and one without plant) the info record with plant is updated.
Dependencies
     You can specify that prices and conditions in purchasing info records
     are only allowed at plant level in the Purchasing IMG, under Conditions
     -> Define Condition Control at Plant Level.
Hope this helps you,
Regards,
Archit.

Description in Radiobutton fields are not exported properly to PDF

I can make a radiobutton question in Indesign; Example: Gender with the answers Female / Male and the descriptions Are you a female? Are you a male?
After exporting only the Description of the first field is shown: So for both choices I am getting Are you a female? shown in the tooltip. Of course this does not work to get an accessible PDF. And correcting in Acrobat is not fine...
I think this is a bug that should be fixed. Or is there a workaround?

The tooltip comes from the Description field. In the screen captures below, there are two radio buttons, one for Yes and one for No.
The buttons have the same name. But they have both different export values and descriptions. It's the descriptions that generate the tooltip.

Cuts from Screen Recording do not export properly

Similar Messages

Maybe you are looking for