Cutting a Big section from a finished project, I need to rant on this one!

Hi all...
On listening to a completed song and from others advise. The song is too long!
Mainly the 2nd verse is the part that could have been cut and should have but I got caught up in the story tell
So now Im looking some help on cutting entire sections out of projects. Is this easy or horrible task. I know a horrible one which is proving impossible:(
So, Rather than the unwanted 4 bars on the 2nd verse being there, should I deleted every track in within that section
Then drag the latter end of the song back up to that point. So that my bridge section kicks in now the point where Ive deleted the old unwanted section of the verse.
I wont even tell you the format I was thinking of taken! But then I wondered???
If I highlighted all 32 tracks from the point of the Bridge section, drag them up to where I wanna cut out that verse will it work ok?? Do I also have to delete the old section (un wanted verse part) or will the dragging of the new section over them over ride them on play back??
I know Im not great at communicating this but its a tedious un need job if I have to do it arse ways. Surely if highlight and drag a section, to and over and un wanted section it should fitin tightly and sound ok????
Thanks guys

Hi, Houston still hasn't arrived!
Ok so first of all I get everything about splitting at region 40 and 50, deleting that data then dragging the tracks back to fill the now empty space. But
I just cannot find "Split Region by play-head" Anyway where! According to the manual it should be under Region/Demix and its a drop of menu in there. Here's an online link showing that.
http://books.google.ie/books?id=TwUITg7oDdsC&pg=PA127&lpg=PA127&dq=howto+split+regions+in+logicexpress&source=bl&ots=cZlG-0AOjl&sig=0ob8zaamB2skLQOCVrUoAux0YNA&hl=en&ei=veVBTb fYNoWFhQfUlpy7AQ&sa=X&oi=book_result&ct=result&resnum=10&ved=0CGgQ6AEwCQ#v=onepa ge&q&f=false
Woah that link is big! But it shows where it should be and for me its not there???!!
There is no SPLIT option when I go into Region at all. Ive even tried searching in preferences, key command and I get nothing. Split Chanel is the only thing I see really.
I have tracks highlighted, I just dont understand why I cant find the split region option. Also Ive tried searching all over the key board for the ß key.
I dont know where Im going wrong.
PS: If I do figure this out, will Audio inst that I have on loop within that section also cut??
thanks again dude

Similar Messages

Upgraded to 5.4 when opening lightroom get a message "encountered an error when reading from its preview cache and need to quite" tried this several time but get the same eror message

Upgraded to 5.4 when opening lightroom get a message "encountered an error when reading from its preview cache and need to quite" tried this several time but get the same error message. Says Lightroom will attempt to fix the problem the next time it launches but that is not happening. How do it fix this?

Delete the preview cache using your operating system. It is a folder whose name ends with Previews.LRDATA. Do not delete the Lightroom catalog, which ends with .LRCAT

If I buy PPCC how do I build and burn a DVD from my finished project

I am about to purchase a new IMac for editing on, moving up from my 7 year old Mac Pro running FCS2.
Am I right in saying that Premiere Pro CC does not come with Encore?

In a sense.
There is no CC version of Encore, however, Creative Cloud subscribers also get full access to the CS6 suite, which does include Encore.

JNI (Java from C) -- multiple JREs installed, need to use non-default one

Hello,
I don't know how many Google/forum searches I must have tried -- I can't seem to find a solution to my problem.
I am calling Java from C. We have two types of environments:
(1) 1.3/1.4 mix, and
(2) 1.4 only.
The mixed environments are configured to use 1.3 by default. This configuration will not be changed. The original developer's code needs backported to the mixed environment, but it has been discovered that his Java code is not 1.3-compatible.
Since the code is not compatible with 1.3, I need a way to bypass the default JRE setting and get JNI to start a 1.4 JVM. Is there a way to do this?
Thank you for your help.

My "solution" is a kludge. It attempts to compensate
for what I thus far believe to be an apparent lack of
functionality. I believe the functionality I
described should exist in JNI so that little jewels
like my "solution" are not needed. What I am doing
is improper. Therefore, I respectfully disagree with
you.Except that your OP suggested that if you could replace it with 1.4 then that would be suitable solution.
So if that is a suitable solution and you can in fact modify the JNI code then that is a solution that meets all of your needs.
Regardless however you will note that the "The Java Native Interface" book in chapter 7 provides a specific section which
1. Specifically points out why you can't depend on a generic VM loading mechanism
2. Provides a specific mechanism which is OS/Platform specific, for doing runtime loading of the VM presuming certain constraints are followed.

Rescue stereo audio fades from a mono project

On Premiere Pro CS3 I accidentally created a project with a mono master audio track. The live audio is in fact mono, but the backing music which fades in and out is stereo.
I can't see any way to convert the master track to stereo (or find any advice online on how to achieve this) so I thought I could export the video and live audio into a mono-sound movie, then combine it with the music in a new stereo project.
But how do I apply the very complicated fades from the original project to the music on the new one? Tried exporting an EDL of the relevant audio but can't figure out how to apply it when I import it into the new stereo project.
Anyone know the best way to do this?

Hi – thanks for the advice Ron. Before I saw your reply I was trying to figure out how the EDL I exported from the original mono project could be used in my new stereo project, which was basically a full mixdown of the original without the music.
Importing the EDL created a bin folder containing separate L and R audio (of the backing music) and an EDL file, but when I added these into the main sequence there were no fades to be seen. What I had failed to notice at first was that it also created a separate sequence tab on the timeline. This contained the same audio files WITH fades. Not sure what the logic of that is.
But, when I finally noticed that the other sequence was there, all I had to do was cut and paste the audio into the main sequence.
I usually deal with very short videos so I've never used multiple sequences within the same project before and would have to look up how to nest one inside another. So I found another solution in the end, but yours sounds entirely credible too. Thanks again.

Export the Biztalk error to a file from the Biztalk project.

Hi,
I have created console app in VS 2012 to export the biztalk errors from Event Viewer to a text file.
Here i have used eventlog class to fetch the application log errors on click of .Exe file it will generate the the text file.
So I need to integrate this .exe or .net code to Biztalk project. How can i integrate this one. Any idea on this - how can i achieve this.
Biztalk handles error but i need to export that biztalk error which occured in the application in to seperate text file in a location. Because each time user needs to go to Adminstrative console then to EventViewer->Windows log->Application - >
to view the Biztalk error. In this case i need to export the errors to a text file from the project instead of going to view error in Admin Console. i need some code samples on how to make it.
But in .net we can achieve it using EventLog class to export the event viewer appplication log to a text file.As i said in first Earlier.Whether it can be integrate in to biztalk project through Custom Pipeline or any other way.

Hi Vijayan,
What is the objective of your requirement? Is this just to save user from going through Administrative console
à EventViewer->Windows log->Application - > Filter event for BizTalk error?
In this case you can create a custom event log for BizTalk and hold the events related to BizTalk in one node/category. So you’re users can directly to eventlog for
Biztalk error. (FYI event log can be access without going through BizTalk admin console). So users can view information/warning/error specific to BizTalk in one view
EventVieweràCustom
viewàBizTalk.
No automated steps required, just a simple one off configuration would do the trick. Read the following article on step-by-step guidance on achieving the same.
Creating a custom event log under Event
Viewer to log server events
Or is requirement is due to some access issues you want to accumulate/consolidate all the BizTalk errors into one place so user can see BizTalk evenlog info in one place like
a text file in a shared location, then the following article can help you to achieve the same.
http://blogs.technet.com/b/heyscriptingguy/archive/2007/09/06/how-can-i-backup-an-event-log-to-a-text-file.aspx
But what do you mean by integrate above process in to BizTalk. When you mean by “Biztalk handles error but i need to export that biztalk error which occured in the application
in to seperate text file in a location”, are you looking to log the BizTalk “application” error/events i.e logging from your applications in BizTalk to a log file ? Then you can consider about using standard logging library like Enterprise
Library Logging block, or NLog, or log4net. log4net can fit
well comparing other logging framework.
Following references can help you on this context:
Write log file for Biztalk Logging
with log4net – Sample
Biztalk and Logging with log4net
But keep in mind that this is application logging, i.e. logging from your BizTalk applications like logging while processing the message in pipeline/orchestration. But this will
not log when one of the send port/receive location is stopped. These information are logged into eventlog.
If you’re looking for application level logging then also know about
BizTalk CAT Instrumentation Framework Controller.
Or if you want to your existing console application which exports the eventlog to text file to be automated, then use the Windows schedule task to run your console application
periodically and let it export the errors to text file. You can console the export process in such a way that it can export the eventlog entries for the last one hour if you can configure the Windows schedule task to run every one hour to export the logs to
text file.
I have given various options, hope you can choose the one which suits your need best.
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

How can I export a finished project from iMovie when the "share" function will not respond?

Hopefully someone might have an answer for me. I am trying to export a finished project to You Tube. However, when trying to choose the file, it does not show up in the finished project list. I have gone back to iMovie to see if I've made a mistake with finalizing it. It seems to be finalized, but I cannot share it to anything (You Tube, Facebook, iTunes). I click on share and it does not respond. I click on File, scroll down to share, it does nothing. Has anyone else had this problem? How did you reslove it?

I experienced the same problem as mreingrover. The Share features of iMovie appear to be completely unimplemented.
I had had MacKeeper installed for a short while on my previous Mac; never on my new MacBook Pro. I could not find any trace of it in Application Support, Launch Daemons, or LaunchAgents, in either my user Library or the root Library. But I figured maybe there was some trace somewhere that had been copied over from the old system, so I deleted iMovie and went to reinstall it from the App Store.
Now the App Store wants $14.95 for an app that has never worked right, and which is (I think) supposed to be free with my new MacBook Pro Retina.

Purchased desktop Feb 2012 and did not come with iDHow do you burn a DVD of your finished pIed video from iMovie edit project?

Purchased desktop Feb. 2012; it did not come with iDVD. How do you burn a DVD from your finished product in iMovie edit project?

See Why is there no iDVD on my new Mac? and How to create a video-DVD? (Macs without iDVD)

In imovie11 the finished film shows up in the events library but the project file is missing. Any way to reconstruct it from the finished film?

in imovie11 the finished film shows up in the events library but the project file is missing. A complete search of hard drive fails to find it. Any way to reconstruct the project file from the finished film? I need to re-edit the movie.

Thanks for the info. I do have the Aperture 2 disc so I'll re-install and repair library then give it a go again. It will probably take a few days as I have a HUGE library. I'll let you know the outcome when it completes! Thanks again for the help.
Mark

Lost sound in some film clips when finishing project. Using iMovie 11, after adding music to photo section, could not get sound back in 2 film clips at end of movie. Beginning clips ok. How do I restore sound? Thx.

Lost sound in some film clips when finishing project. Using iMovie 11, after adding music to photo section, could not get sound back in 2 film clips at end of movie. Beginning clips ok. How do I restore sound? Thx.

Everything in your project will be exported when you use the share menu.
If you want to export only half, I suggest that you
1) Select the project in the Project Library.
2) Click FILE/DUPLICATE PROJECT
3) Give the duplicate a name, like Project A snippet.
4) Open the duplicate project in the Project editor and delete the segments that you do not need.
5) Then Share.
You mentioned surrounding a portion of the clip you were editing in Yellow. Once you do this, you should right-click and then select either DELETE SELECTION, TRIM TO SELECTION, or one of the other options available. That is a key tool in editing.
You mentioned MPEG Streamclip. I agree that MPEG Streamclip is a great tool.

Is there a way to select multiple track sections from different tracks and join them to make the chorus on iPhone?

I am currently using the iPhone to record my vocals on top of professional beats, or riddims as they are called in the dancehall world. Is there a way for me to select multipe voice sections from different tracks, copy them and then paste them later in the project. I don't want to record the chorus more than once. Normally what I do is sync the project to my wife MacBook Air and then from there edit it but I would like to avoid this. Also, I use the earpods microphone to record my voice and of course it doesn't come out professional quality but it is decent. Do you recommend a microphone that plugs to the iPhone or should I get an interface? Thanks for the help.

You can either copy and paste single regions or duplicate sections, if you want to copy regions
from different tracks in parallel.
See: Extend a song with song sections
Adjust the length of your sections in a way, that the regions you want to copy from different tracks are together in a section of your song.
Add a copy of a section:
Open the song section controls, choose the section you want to copy, then tap Duplicate.The copy is added after the last section.
Tap Done to close the song section controls.
After copying the section, move the new section to the end of the song:
Change the order of sections:
Open the song section controls, then tap Edit.
Drag a section up or down in the list by the handle on its right edge.
When you are finished, tap Done.
Tap Done to close the song section controls.
Regards
Léonie

Sol. Landscape - Business Scenarios from Temp. Project: Compare & Adjust ?

Hi,
In SOLMAN_DIRECTORY, within Business Scenarios, if I were to copy Business Scenarios from a Template Project, is it supposed to help me use the 'Compare and Adjust' functionality ?
I see the icon for this utility, but invariably greyed out at all levels.
The idea is to hold Template Project as the master content provider, even for Support side.
The workaround could be (yet to fully test) to use a Maintenance Project, to compare and adjust and check it in again.
Any ideas welcome - especially, on why the 'Compare and Adjust' icon appears greyed out, in the Solution.
Best regards,
Srini

Hi Andreas,
The news that your colleague has tested it successfully is very encouraging and gives me hope.
That's the way I was testing as well, with limited success. I couldn't finish testing because the the buttons for Check Out/ Check In Requests disappeared from SOLMAN_DIRECTORY suddenly. Then, I got into SAP Notes search etc.
Can you/ your colleague please confirm if my following understanding is correct and suggest changes where it's wrong:
(1) First, create a Solution and Maintenance Project in the same project language (to get the KW context right)
(2) Create a few Business Scenario Names in Solution Directory (e.g. Procure to Pay, Order to Cash etc.) - as manya s required
(3) Later, assign the Maintenance Project concerned to the Solution, in the tab 'Solution Settings'
Note: (2) is done before (3) since the assignment of a Maintenance Project renders the section greyed out. If it is greyed out, there is nothing to check out at the first place.
(4) Check out the Blank Scenarios to Maintenance Project
(5) In SOLAR_PROJECT_ADMIN, I would have already pre-selected the relevant scenarios under 'public' Templates, so that they are available in Maintenance Project's SOLAR01/02 under the Business Scenarios folder
(6) Now, when I open the Maintenance Project in say SOLAR02, it would list me the scenarios copied from Template in the usual way (as in say, any normal Implementation Project), and below those folders, it would also list the 'Checked Out' name sake Scenarios from the Solution Directory
(7) I will 'copy' and 'paste' the right Business Processes from the first set of Scenarios (from Template Project) into the Solution Directory blank Scenarios - while doing so, I will retain the right to 'refer' documents and not copy them
(8) I would Check In the structure back into Solution Directory
(9) In say, a months time or so, the Process in Template Project have undergone changes (more process steps added under a process, more documents added/ removed/ changed etc.)
(10) I would open the Maintenance Project after running SA_PROJECT_UPGRADE for the maintenance project. I would do the 'Compare and Adjust' function in the regular Scenarios to get the content adjusted

Saving finished projects?

I'll apologize in advance if this is covered somewhere else but I did a fair amount of looking and found nothing.
When I'm done with a project I need to be able to burn all images and data to a DVD and an archive hard drive. I thought that binders were going to be the ticket. Now that there are no binders, what is the process.
I've been using 4.1 and really loving it. But if there is no way to save off finished projects in an way that will be useful in the future and also keeps my working library manageable, I can't see how this software can work for me. I am certainly willing to change my workflow but forever growing one library containing all projects is just not reasonable for me. Does each project need its own library?
Thanks.

Morgan,
I've been using separate libraries for each project as a guard against the flakiness that emerged (for me at any rate) when the libraries got big.
My basic plan (I've tried it on a small three day job with a separate library for each day and it seems to work) is thus:
* Make a "master library" but don't work directly with it just yet
* Make a separate "project" library for each job - import images, develop, print, galleries, whatever
* At some (any) convenient point, write XMP files for all relevant images (still working to understand the "no JPEG XMP" impact on my keywording, rating and the like)
* Cleanly import the images into the master library (it reads the data from the XMP and so all the LR work comes in with the image)
* [ Updating XMPs in the project library and reading across the changes seems possible but I haven't quite cracked it yet. For those inevitable "oh I've just noticed that..." moments. ]
* When the project is archived, open the master database and re-connect the entries for that project with the archive medium (eg DVD)
This gives me (I think) everything I want:
- small, robust libraries on a per-project basis, can be archived with the project. When the files are reinstated to their original location, LR never knew they were gone.
- a large, overall library (that may or may not be so robust) that can be reconstructed by re-importing images and XMPs held on backup media if required - a lot of elapsed time but not much interactive time (presumes the database has become corrupt rather than a disk crash or something).
- a reference in the large library to exactly which archive medium contains which project without the need to mount it in order to browse previews.
I reserve the right to be wrong about some or all of this, I'm still thinking it through.
Damian

Final Cut Pro X will not export my project - error 1

Hello everyone,
So Final Cut is giving me a hard time. I have a project about 15mins long that I would like to export as a master file and it just doesn't want to work. When I first finished and tried to export, I was using verison 10.0.8. I would select master file for the export and it would just sit there, stuck on 0%. I then realized that I needed to update. I updated to 10.0.9 and tried to do the same thing again - no luck. Next, I closed final cut and trashed preferences. I then opened up and tried exporting again, same thing happened, stuck on 0%. Then I closed again and trashed preferences again. I opened final cut, turned off background rendering, and trashed project render files and event render files (as was suggested in another discussion for export problems). After doing that, I again tried to export - still nothing. At this point of course, I had trashed the render files, so I figured I should just let the project render again. I turned background rendering back on and opened my project - now it would not render! It was stuck on 0%! Okay so I closed and reopened again. I first tried to copy my whole project into a new project and try letting it render that way - nope, didn't work. So I closed and opened again. I turned off background rendering and started a new project. I pasted just a section of my video into the new project and manually rendered that section, which worked. So I pasted the rest of the video (in chunks) into the new project, manually rendering chunk by chunk. Finally I had my whole project again, and the whole thing was rendered. I tried exporting again and got the error 1 message, "The operation could not be completed because an error occurred when creating frame 373 (error -1).". This is my current state of affairs, and its driving me crazy. I just want to export my project!
Please help....Thanks

Thank you. I found it now. This is a location where I did not expect this. I tried to do this using the GUI elements controlling how clips are displayed in the time line. I also was looking for a context menu item on the clip. I did not expect it in the preferences.

Storage on finished projects?

I have several Macs (3 G4 and 2 G5). I plan to remove all G4s. I try to look all files I have. Some of projects that we already put on video distrubtion which we finish that project. I am not sure what I should do. Keep project file and capture scratch? It will be big than fit in one DVD-R. Should I put in portable hard drive? or DLT? or ???? Same thing for DVD Studio Pro. I plan to move those unfinished projects in external hard drive until I am ready to work on specific project and will use on my G5. Any suggestions? Thanks

my vote is to keep all of your media where they originally came from. the original tapes(if you are working with tape). these will last a long time. use media manager to consolidate your project and store all your project and source files for every program you used onto a data DVD. SO if you have to revisit a project and make changes, just grab the data off the DVD, open the project file and recapture your data on the original tapes.
I always make a 2 copies onto tape of the finished project one with the completed edit and one without the music track. (in case of a re-edit)
Drives are cheap but they don't last forever.

Cutting a Big section from a finished project, I need to rant on this one!

Similar Messages

Maybe you are looking for