Cutting help?

I have already cut a song, but since i cut so much out of it, it leaves this silent patch of "song" at the end (nothing actually playing). How do i get rid of that?

move the EOS marker to the end of your song:
http://www.bulletsandbones.com/GB/GBFAQ.html#eos
(Let the page FULLY load. The link to your answer is at the top of your screen)

Similar Messages

  • OSX fails to launch after power cut - HELP please

    Also running a Quicksilver with OSX 10.2.8 and OS9.
    Following a power cut OSX wont launch - nor will it launch from the original discs - nor will it let the original discs re-install as it says there is a later version on the drive.
    It launches in OS9 but wont launch OSX from the start-up panel.
    When trying to launch in OSX it just sits there grey and spinning gear.
    I've moved the font folders from the OS9 system folder to the desktop as suggested in an article but no luck.
    It wont start up in Safe-user just sits there grey and spinning gear.
    It wont let you start-up in Single-User mode as starts off a message "kCGErrorFailure : CGSNewConnection cannot connect to server
    Please can anyone help - getting desperate enough to go buy an new imac
    Graham

    OS X Installer discs are thought to be "known good" reference software. If yours are the original ones that shipped with your Mac, they will not install onto your Hard Drive after you have run updates of the Hard drive software. But they should boot up.
    If your Installer disc will not boot, even after a PMU reset, you have a Hardware problem.
    Booted from an Installer CD, before you answer any Installer questions, even what language to use, look on the Installer Menu and you should find Disk Utility. Select your hard drive and run ( Repair ) repeatedly until it comes clean or gets stuck, then (Repair permissions) once.
    Before restarting, set the startup Disk using the Utility for that purpose. That will do some checking and fixing of startup information required to boot.
    Message was edited by: Grant Bennet-Alder

  • Photoshop Laser cutting help

    I am using photoshop to create simple image in order to laser cut. The image was drawn on photoshop with shapes (circles, rectangles). I used it for laser cutting today and the image was cut twice. The second time the image was cut it was about 1/4 inch away from the original image. Is there a reason this happened? How can I modify my image/file to avoid this? If I use illustrator, can I avoid this problem?

    My thinking is the cutter maybe seeing two paths, one for the stroke and one for the fill. I assume it has more to do with using shapes instead of normal vector paths. But I could be wrong. If I am right, then using illustrator should work, since its path is used for both stroke and fill.
    To test my theory you could create a shape that has one or the other (stroke or fill) and see what that does.

  • Flash and final cut help!!!

    client wants me to export from final cut pro to flash file how and what plugin do i need

    I am echoing two solutions since I have used both. I'll also clarify one.
    1) You can make a h.284 file .mov and change the extension to .flv. Flash will play that since Flash supports h.264. Really it works. There are threads on this. (As I type this you may I realise you might need to make a .mp4 and change the extension - one or the other works).
    2) You can do as others here suggest and that is install the full Flash program and you will get the encoder (On2 Video). Just download the trial version of Flash. Once installed you will have the encoder On2Video & ".flv" will be a choice in your QuickTime export list (in QuickTime Pro). You will have quite a few controls about how you want to encode your video. Here's the sweet part - the encoder will remain after the trial period on the Flash program has expired and will continue to work.
    Good luck. This is totally doable with these free tools.

  • Rebuild Library after power cut - help...

    Hi,
    we had a powercut today and iphoto wont open.  i have tried the control/cmd plus open option and that wonr work.  I have extracted the originals and master folders and tried dragging to iphoto to open but that gets the same message and my backup is not wokring as time machine thinks i havent backed up since 2012......i can however still see the photos in the folders on my desktop....help....

    Log into another user account on your Mac and see if iPHoto will open as it should.  It it can then the problem lies in your account.  If that's the case try the following:
    1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
         User/Home/Library/ Preferences folder.
    2 - delete iPhoto's cache file, Cache.db, that is located in your
    User/Home/Library/Caches/com.apple.iPhoto folder (Snow Leopard and Earlier).
    or with Lion and Mt. Lion from the User/Library/Containers/com.apple.iPhoto/
    Data/Library/Caches/com.apple.iPhoto folder
    3 - launch iPhoto and try again.
    NOTE 1: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto.  You'll also have to reset the iPhoto's various preferences.
    NOTE 2:  In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
    If iPhoto couldn't open in the other user account then a reinstall of iPhoto is indicated. To reinstall iPhoto delete the current application and, on all Macs with Snow Leopard or earlier installed, all files with "iPhoto" in the file name with either a .PKG or .BOM extension that reside in the:
    HD/Library/Receipts folder (10.5 and earlier)
    or from the /var/db/receipts/  folder (10.6) .
    Then install iPhoto from the source it came from originally.
    OT

  • Cut Help

    Hi
    I have to cut the video for a moment ( like a black out ) but i need to keep the sound (music) . How can i do that ?

    dylon wrote:
    I have to cut the video for a moment ( like a black out ) but i need to keep the sound (music) . How can i do that ?
    create in any picture processor (Photoshop/Elements, Pixelmator.. even Keynote..) a 'black frame', a picture containg .. ehm, black.
    insert that jpg into your Project as any other picture..

  • Track naming short cut help

    Is there a way to name tracks by just selecting the track  name and then, like in the older software  versions aa 1.5  just use the tab key to jump to the next track to rename and continue down the list of tracks instead of selecting  each track with the mouse to select it first?   I think I've searched correctly but can't find the solution.
    Cheers

    Well, I'm an idiot.  I only tabbed once.  Didn't realise the tab was extended to include mute solo...volume etc.  before jumping down to the next track.
    Got to cut down on the coffee.

  • Final Cut supported formats...

    As I was unable to find a solution to my problem at Final Cut Pro help page , I have decided to post this here .
    I bought my PB with FC Express 2 preinstalled .
    Now , I shoot my "videos" with a Sony Cybershot photo camera . When I copy the footage onto my PB's HDD it comes in .mpg format .
    I can watch that just fine with Quick Time (both video & audio). When I import the footage into FC and place in the trim window or the timeline , it doesn't have any sound anymore . This is quite annoing because the Final Cut help documentation says mpg is a supported format , and there is no bundled software within the Mac OS X to convert the footage into another supported format (like avi or mov) .
    iMovie doesn't even import the files at all , Graphic Converter does open the files but doesn't export the sound .
    I even tried to rip the sound from the footage with QT Pro in order to import it separately onto the audio timeline , but amazingly the option in Quick Time disappears from the export dialog box options ( though it works with divx and xvid ) .
    I'm out of ideas , and I really need to make this work .
    And I'm not gonna go back to Windows just for that .
    Sorry if this is not the place to post this but I'm a bit desperate as I have some deadlines for some projects .
    Thanx in advance for any sugestions .

    .mpg format
    http://www.sjoki.uta.fi/~shmhav/SVCDon_a_Macintosh.html#edit_convertMPEG
    ObSig: I don't benefit from the link.

  • Final Cut Studio Book?

    *Is there a good Final Cut Studio Book out there? I am good with final cut pro, but I can use some polishing on my compressor, motion, & dvd studio pro skills. I didn't find the manuals very helpful.*
    Thanks,
    D.

    I strongly recommend the books from Peachpit Press too. They have a large series of books on most of the Final Cut Studio applications. If you are looking for Final Cut help, the best would be the Apple Pro Training Series: Final Cut Pro 6.

  • Got a second hand G4, wiped it, having trouble reinstalling final cut pro

    my mom and i are working on a second hand G4 with superdrive. we wiped it, reinstalled the basics (3 disc boot series), and moved on to install OS X. everything seemed cool. then i put in the final cut pro disc (we have both 2 and 3 discs for 'upgrades' but i started with the basic one). i put it in, i start to install, it loads almost the entire way and then it gives me an error of 'MDB (or MBD?) was not written. Continue?' i have no idea what i'm doing wrong. i said continue, then once it finishes, i try to open it and nada. does this have to do with Quicktime? it's just a guess but i really don't know what's up. the main reason i got the mac is so i could make slideshows for my family in final cut. help?

    Sorry so long in responding to your comments. I have FCP 1 CD with 2 and 3 upgrade CD's. After installing FCP 1 a comment box requests MacOSx.1.1 update. Downloaded it from Apple website - won't let me install it. I get to select a destination - then it wont' allow me to pick one. Becca and I did not get this error last week, when we started this.

  • Problem playing with Multicam editing using samples from Tom's FCP 5 book?

    I have some media from the DVD accompanying the book Final Cut Pro 5 Editing Workshop.
    There are 4 camera angles of a music trio but unfortunately there is only audio on Camera 1.
    This means that though I can switch video angles, the audio for about 75% of the final clip is missing.
    Is there any way to ensure that the audio is added to all the clips and angles?

    There is an excellent podcast tutorial series called "Creative COW Final Cut Help Tutorials Podcast (SD)"
    in the iTunes Store.
    The latest three are very in depth concerning the new Multicam in 10.0.3 and address your audio concern and much, much more.
    Can't recommend them enough.

  • Reconnecting media with a lot of separate reels seems inefficient

    I recently moved a lot of media to another drive.  When I go into the timeline(s), I select 5, 7, 12 clips to reconnect.  It returns 1,2,4 connections.  I'm doing this  in the timeline.
    It takes so long, I'm just saying "the heck with it".  But, actually, I can't  Not an easily reversible problem.  What could I be doing better?

    You use Media Manager exactly for things like this.  You can use it to consolidate all the media used in your project to one drive, for archiving or transport, - or codec conversion, or trimming unused media, for examples.
    If you open Final Cut Help, and look for the topic "Overview of the Media Manager" you will find instructions and examples. It will get up to speed in no time. It is a very useful tool.
    MtD

  • Vado central changes clip dates to transfer time

    vado central changes clip dates to transfer time When vado central transfers movies from vado hd onto my imac, each clip gets the date of the transfer, not the date the movie was taken. I have the latest vado central for macs (..0f6). I've tried both "Transfer" and "iMovie" download methods from vado central. When I use "Transfer", the file in the Finder has the download time, and when I use "iMovie" the date in imovie (09) is also the download time.
    If I open up the vado hd dri've in the Finder and look at the file on the device, it has the correct time and date, when the movie was taken. If I drag the file from the dri've onto the desktop myself, the original, correct time and date is preserved.
    So, it's vado central that is rewriting the time and date on each clip when it transfers it onto the computer.
    Is this just me? Or just macs? I haven't seen other complaints about this. I have the big and unhappy job ahead of me to guess and fix a bunch of dates.

    Thanks for your help.  My original inquiry did not contain enough detail, so I have added more as follows:
    We are not changing any file heirarchy structure or file names.  I should have pointed out that we are using an Avid ISIS system for shared storage and all our project files and capture scratch files go there.    We always use Log and Transfer to import AVCHD files.
    "Macrosextended" format is a new one on me. I couldn't find anything about it in Final Cut help, System Settings, or User Preferences; or on the internet.  We set the Scratch Disk destination for all our Final Cut systems to the ISIS Workspace we named "Project_Files" on the ISIS 5000. 
    We normally use Sony XDCAM EX cameras and have had no problems with their files.  The AVCHD camera we use in some situations is a Sony HXR-MC50U.  

  • How do i find out what sequence preset i need to use???

    ive been looking all over the internet for this answer and cant find it anywhere! theres a ton of info about sequence presets but i cant seem to figure out what sequence preset to use for my Sony handycam DCR-HC32. if i could get any help it would be greatly appreciated!!

    generally speaking, when you create a blank sequence and then drop a clip of the captured footage into it before you put anything else in there, a dialogue will pop up asking if you want your sequence settings to match your clip settings. have you tried that and it didn't work? If it doesn't pop up, that is an option you can set somewhere (not in front of final cut right now, but if you search the final cut help guide for "match sequence settings" you'd probably find it). if that dialogue doesn't pop up and your render bar isn't a bright color when you drop stuff in, (red, green, orange) then you're cool. you could also try setting it to something completely off and then see if it changes back when you drop it in, to be sure.
    alternatively, you could right click the clip in your browser and choose "item properties" and create a sequence to match that.
    sorry if you already know this stuff and your issue is more complex. i'm guessing you're fairly new to the program?

  • Connman_dmenu: netcfg(netctl) alternative!

    recently I tried all network manager, but eventually settled down to connman.
    interestingly, connman is such a powerful tool because it provides proper abstraction on top of wpa_supplicant.
    Pro:
    + super lightweight (dmenu + connman)
    + faster scan and connection (vs netcfg) (this is around 1~2 secs while netcfg can take up to 15 secs)
    + automatically connection after first connection is made (wifi or ethernet)
    + supported wifi security: wep, wpa2 peap, wpa psk, none (these 4 are the most common)
    + 2014/1/14 add vpn pptp support (pptp is the most common one.)
    Con:
    - dmenu cannot support all configuration, but for most people we dont have complicated wifi configuration
    This works nicely if you use i3 or some other random tiling wm.
    install
    https://aur.archlinux.org/packages/connman_dmenu-git/
    Last edited by taylorchu (2014-01-16 05:17:36)

    Here's the output you requested.
    connmanctl> scan wifi
    Scan completed
    connmanctl> services
    *A PAL2.0 { wifi_a088b45b697c_50414c322e30_managed_ieee8021x }
    *A PAL3.0 { wifi_a088b45b697c_50414c332e30_managed_ieee8021x }
    PAL Setup { wifi_a088b45b697c_50414c205365747570_managed_none }
    Purdue Guest Network { wifi_a088b45b697c_507572647565204775657374204e6574776f726b_managed_none }
    Purdue Guest Network { wifi_a088b45b697c_hidden_managed_ieee8021x }
    attwifi { wifi_a088b45b697c_61747477696669_managed_none }
    attwifi { wifi_a088b45b697c_hidden_managed_none }
    NETGEAR38 { wifi_a088b45b697c_4e4554474541523338_managed_psk }
    PFRPZD8923YOHP { wifi_a088b45b697c_504652505a4438393233594f4850_managed_ieee8021x }
    default { wifi_a088b45b697c_64656661756c74_managed_none }
    └➤ sudo connman_dmenu
    cut: invalid byte, character or field list
    Try 'cut --help' for more information.
    cut: fields and positions are numbered from 1
    Try 'cut --help' for more information.

Maybe you are looking for