Cutting out a person from a video.

Ok I have a background video and a video of a lady on the track above it. I take the 16 point track matte and cut her out. I now want to blur the cut edges to smooth her into the below video. I tried the black video track as when you do a viginette but it kills the bottom video track because there is no transparent setting. Just black. How would I do tis in ppcs6? It is as easy as beziar mask in Sony Vegas and then feather. You have a video clip cutout and a transparent feather that blends into your background beautifully. Any help would be great thank you.
David

I am not sure if it will work for you, but try the Roughen Edges effect.
Increase the border size, decrease the edge sharpness to zero, and increase the scale. That might do the trick.
Life would be easier if the garbage matte had a feather parameter.

Similar Messages

  • I want to cut out a head from a photo and insert it into another photo again. In the head hair flying in the wind and the blue sky can be seen between the hairs. This blue sky I want to remove, so I can only use the head with hair flying in another photo.

    I want to cut out a head from a photo and insert it into another photo again. In the head hair flying in the wind and the blue sky can be seen between the hairs. This blue sky I want to remove, so I can only use the head with hair flying in another photo. Is it possible to simply delete this blue color of the sky?

    Make your selection and then use Refine Edge.
    See this video tutorial from Bob Gager.
    https://www.youtube.com/watch?v=xrl3Qwg6zSc

  • Cutting a this strip from a video

    This seems like a mundane problem that may have been answered several times before. I am using CS4 and I want to cut a thin strip from a video and use that as a background for title of another video. I am not able to figure this out - stupid me. Can someone help?

    Like Todd said...
    use motion position scale etc to put video where you want , crop as needed, same with title layer

  • How to put a person from a video in front of an other backgrounded video

    really i can't describe the problem but i want to make a person from a video in front of an other backgrounded video
    here is an exempte Anime Mix [AMV] - On My Own - BANZAI [ 2014 ] ᴴᴰ - YouTube
    does premiere pro can do this ? or i need after effects ?

    Search the help file or user guide PDF for blue screen

  • Streaming cutting out when streaming from iTunes libarary to Apple TV

    Up until a day or two ago everything was working fine, and I haven't changed anything with my WIFI settings or anything else.
    I usually load up a .mp4 file into iTunes libary and then play it, and then I click on the Apple TV icon to stream it to my TV. This works fine, however after about 10 minutes it can cut out, and then when I restart it, it's fine, but then cuts out again later.
    At first I thought it was a problem with the file I had converted from AVI to MP4, but I just tired a native MP4 and I still get the issue.
    I haven't changed any settings on my mac or apple tv.

    Welcome to the Apple Community.
    Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
    You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
    Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
    There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first. Networks that have inherent issues can be seen to work differently with different versions of the same software. You might also try moving the Apple TV away from other electrical equipment.
    The following article(s) may help you.
    Troubleshooting Wi-Fi networks and connections
    Recommended Wi-Fi settings
    Sources of Interference
    Wifi Diagnostic Software (for Mac users)
    You may also find some help on this page, where I’ve collected some of the more unusual solutions to network issues.

  • TV keeps cutting out for anywhere from 2 - 20 seconds

    My TV service cuts out arbitrarily (screen goes blank) for anywhere from 2 to 20 seconds. Tends to happen more often and more frequently in the evenings.  It is occurring both on my HD-DVR box as well as my standard STB.  All the boxes are Motorola.  Any ideas.  This started about 6 weeks ago and is getting really annoying. 

    that is usually an HDMI issue, so that is either coming from the TV, the Cable itself or the Box. 
    you can try resetting the box first, and see if it goes away.   
    Menu > Customer Support > in home agent > reboot STB. 
    If that doesn't work, you can try power cycling your TV,  just unplug the TV for a few minutes, and then plug the TV back in,   see if it goes away. re 
    And you can try reseating the cable (oddly this works)   just unplug the cable at both ends, plug em back in.   Or try switching the port on the back of your tv (the set top box only has one HDMI your TV may have several to plug into)  
    And you can try changing the cable itself.     
    If all that doesn't work, then then call into customer service and see if they have any tricks up their sleeves,  they sometimes have special reset commands that are a little stronger than simply resetting the box.   they may have to replace it if all else fails.  
    if you plug in a different cable like Component it will probably go away, and you will preserve the High Definition Picture quality.

  • How to send out audio wireless from a video running on AppleTV?

    Airplay its a great feature, I have one AppleTv First Generation and AppleTv Black (AppleTv 2) with ATVFlash, I was wondering how to leverage the airplay feature and send out wireless all de audio comming from my Movies playing in Apple TV?
    I have a Onkyo Multiroom system and I would like to use it.
    My iMac its connected directly to my amplifiers and from there I can send all audio to my home, I was figure out How to do it from Apple TV. I get a great app call Airserver and you can stream all your audio from iPhone, iPad to the iMac and the you can heard using the Onkyo.
    Any help? Why the Apple Tv does not stream audio from movies, actually the first generation has this "Speaker" function and you decide where to send out the audio but just from audio files not from musical videos or movies.

    Simple answer is:
    AppleTV1 can send audio to Airtunes speakers on the network
    AppleTV2 can't.
    AC

  • Cutting out a certain part of video

    Basically I want to know how I can cut out a certain part of a video and then put it onto another video, for example someones face onto someone else body.

    You might find some of Curt Wrigley's tutorials handy for this:
    http://www.wrigleyvideo.com/videotutorial/tutdes_slipsthrustill.htm
    http://www.wrigleyvideo.com/videotutorial/tutdes_ppro2_smoothface.htm
    Neither is exactly what you want to do, but the techniques are the same. You just need to read between the lines a little bit.
    Now, your video source files can help you get really close, or can get squarely in the way. It might help for you to tell us what your video source files are. Be VERY specidic, as .AVI is but a wrapper, and doesn't tell us anything.
    If you have AfterEffects, it will also give you much more power, but it can be done in PrP.
    Hunt

  • Print Out Still Frames From HD Video

    I am importing HD video into iMovie 08. I have made a few still frames from the video for printing. I could not export them to iPhoto or Photoshop Elements 2.
    How can I make HD video prints? Do I need new software?

    I have made a few still frames from the video for printing. I could not export them to iPhoto or Photoshop Elements 2.
    Select the "still frame" sequence and use the "Reveal in Finder" option to take you to the saved "still image" in the named_Project package. If you then double-click the image, it will open in Preview. Using Preview, you can print the image or save it to any of the available image formats in any "visible" location for later access by whatever graphic application you wish to use.

  • How to cut out a haircut from an image correctly

    Hello
    I need some help.
    When I have an image like this: http://wallpaper.skins.be/anna-julia-kapfelsperger/36666/1024x768/
    I need to cut out only the hair but my results are not optimal.
    Is there a special tutorial on this or can somebody give me advise?
    I went through a few tuts but the results are not optimal.
    Regards,
    Mirza

    I have not viewed this tutorial in this thread, but judging by the topic I think it may help you:
    http://forums.adobe.com/thread/500534?tstart=30

  • OVMS - Local display cuts out after boot DMS 59 Video Card

    Hey All -
    We use OVM/OVS on what you might call 'desktop servers'. We have several setup. We recently purchased some more machines that I am installing OVS onto and will add them to the cluster.
    However, these machines only video connection is DMS 59. As such, we are using a default DMS 59 to DVI splitter, and then just running a single connection from the splitter to a DVI capable monitor.
    Using this, OVS can be installed. However, on each successive boot after installing the display will show GRUB, the boot, and then right before OVS loads its console the display ceases to function.
    Now I assume this has to do with our DMS 59 connections - but I can't find any documentation about why this may not be supported or if I am missing a driver.
    Thoughts?
    Edited by: 1009782 on Jun 4, 2013 11:46 AM

    The bug is known, and a patch has been submitted: https://bugs.freedesktop.org/show_bug.cgi?id=80151. There's been no update since friday, so I wonder what the current status is, or if it's up for review at all.
    Does anyone know how we can be notified when this patch hits the kernel?

  • Hello guys, could some one please explain the best process using Photoshop CS2 to cut out the picture from a background?

    Hello,
    My name might be photoshopking, but I am still a newbie trying to learn
    I am trying to present footwear on my website and the problem is all of my images need a white background. Because of this, I have to constantly remove the background detail from photos on the net which I currently just use the Magic Wand Tool which isnt great. I seem to find the edges are pixelated and blurry.
    Would someone on the forum please be able to give me an example using a photo from my website about how to remove the background properly? This would massively help.
    I am really struggling with this image: http://traineraddict.com/wp-content/uploads/nike-fragment-design-roshe-run-ld-1000-sp-692x 461_c.jpg
    Any help would be massively appreciated
    Danny

    when ever I have to change the background i usually use the pen tool and that always seemed to work well  for me i just have to take my time and it turns out fine and there is always YouTube if you are a visual learner hoped i helped

  • Cutting out an animation from a background

    Hello! I'm a flash noob and I just created my first animation of a plant "growing up", following the tutorial here: http://www.youtube.com/watch?v=oyUhrR4wLoA. It worked wonders: I basically drew a few lines, transformed it to symbol, created a new mask and script layer, and just used a brush to cover a part of the image on every frame in order to give the illusion of appearance. However, I don't need a background, I just need to cut the animation and make it an independent SWF. Any help to solve this would be greatly appreciated. Thank you very much in advance!

    You cannot remove a background directly in Flash. however what do you intend to do with the Flash once it is completed ? put it in some Html page ?
    In that case, in your HTML page, do the following 3 step in the <object> section of your Flash script:
    Add the following parameter to the OBJECT tag:
    <param name="wmode" value="transparent">
    Add the following parameter to the EMBED tag: wmode="transparent"
    Edit all <param name="wmode" value="opaque"> and replace the "opaque" (or whatever it may be) with "transparent"
    You will have a flash with transparent background working on all navigator.
    It should look something like this: ( I've put in bold the part that interest you.)
    <object id="FlashID" classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" width="950" height="580">
          <param name="movie" value="Video/Menu.swf" />
          <param name="wmode" value="transparent">
          <param name="quality" value="high" />
          <param name="wmode" value="transparent" />
          <param name="swfversion" value="6.0.65.0" />
          <param name="expressinstall" value="Scripts/expressInstall.swf" />
          <param name="embed" value="wmode=&quot;transparent&quot;" />
          <param name="selectable" value="false" />
          <param name="border" value="0" />
          <param name="embed" value="border=&quot;0&quot;" />
         <object type="application/x-shockwave-flash" data="Video/Menu.swf" width="950" height="580">
            <param name="quality" value="high" />
            <param name="wmode" value="transparent" />
            <param name="swfversion" value="6.0.65.0" />
            <param name="expressinstall" value="Scripts/expressInstall.swf" />
            <param name="embed" value="wmode=&quot;transparent&quot;" />
            <param name="selectable" value="false" />
            <param name="border" value="0" />
            <param name="embed" value="border=&quot;0&quot;" />
            <div>
              <h4>Content on this page requires a newer version of Adobe Flash Player.</h4>
              <p><a href="http://www.adobe.com/go/getflashplayer"><img src="http://www.adobe.com/images/shared/download_buttons/get_flash_player.gif" alt="Get Adobe Flash player" width="112" height="33" /></a></p>
            </div>
          </object>
          </object>
    Hope that help
    Message was edited by: Chorale0001

  • How do I cut out a part of a video file?

    I just want to trim off 20 min. of my video that I don't want at all at the end of my movie then burn it to DVD? Please help I'm new at this. Thanks

    Michael0320 wrote:
    I just want to trim off 20 min. of my video that I don't want at all at the end of my movie then burn it to DVD?
    • select the part you want on DVD
    • add to a new project
    • share to iDVD
    http://www.apple.com/ilife/tutorials/imovie/index.html

  • Using pathfinder to cut out a shape from multiple lines

    Hello,
    There is a probably a really easy answer to this but i cant find it. I have created an area of 'pinstripe' pattern using multiple lines equally spaced and alligned etc, i've then placed a rectangle shape on top of these lines and want to extract the rectangle from the lines so that i am only left with the pinstripe pattern in the area of the rectangle.Hope this makes sense, couldn't think of a better way of describing it !
    Thanks

    I do this all the time! Peter's suggestion is the best/only way I've found. Anything like you're describing, needs illustrator if you need more than what "Paste Into" does.
    Pathfinder in InDesign won't work with your pattern if it's made from lines (but will if it's made from boxes), as long as you don't create the file past page 12 ( see this thread: http://forums.adobe.com/thread/324684 ).

Maybe you are looking for