Cutting the Last Part of a Multi-Track Project & Pasting It Into a New One

I've recorded 55 mins. of audio on a two separate tracks (i.e., one is narration, one is some intermittent dialogue), only I've decided to cut the first "chapter" to only 30 mins. and transfer the other already-recorded stuff to the second chapter -- which will be a new project I'll start.
How do I cut-and-paste the material? Can you open a new project and keep it open at the same time you are going back to the old one? I.e., can you have two screens of it up at the same time, or do you have to copy one, close out the project, open the second project, paste it, then close that one and go back to the first one and repeat?
I know this may seem hopelessly beginner a question, but...please help?

Although the point of this article is different, the explanation in it will show you how to copy between projects:
http://www.bulletsandbones.com/GB/Tutorials.html#allaboutrescuingfiles

Similar Messages

Error sending multi-track project back to Final Cut Pro, can't open XML

I am an experienced Final Cut Pro user but just tried using Soundtrack Pro for the first time on a real project. I sent the audio from my Final Cut sequence to a Soundtrack Pro multi-track project, added a few effects and created some fade-ins and fade-outs, and then tried to Export back to Final Cut.
I selected "File > Export", named my file and selected "After Export > Send files to Final Cut Pro sequence."
Now in Final Cut an error appears that says "The document “Name.xml” could not be opened. Final Cut Pro cannot open files in the “Final Cut Pro XML File” format."
Am I crazy or is something wrong happening here? I can get the exported audio files to appear in my sequence if I select "File > Import > XML" in Final Cut, but after this whole process Final Cut seems to be functioning unreliably (after closing Final Cut and re-opening, I even once got a similar error that said "Final Cut cannot open files in the Final Cut Pro Project File format", which is obviously crazy).
Am I doing something wrong? Any advice would be greatly appreciated.

hi,
i have the same situation. expirienced in fcp, new in soundtrack pro.
similar message. did you find an solution ?

Z Tcode doesn't write the last part of program

Hi experts,
I have a program in a transaction code, and the last part, must be write:
Send it to the world
    lv_sent_to_all = lo_send_request->send( i_with_error_screen = 'X' ).
    IF lv_sent_to_all = 'X'.
      WRITE 'Email Sent Successfully'.
    ENDIF.
    COMMIT WORK.
CATCH cx_document_bcs INTO bcs_exception.
    WRITE: 'Error Occurred'. WRITE: 'Error Type', bcs_exception->error_type.
    EXIT.
ENDTRY.
If I execute only the program, the write works correctly.
But if I execute the tcode (X) with the program, no write is working.
Someone knows about it??? Why is working if you execute the program and not when you execute the transaction??
thanks you very much!

Its simple. While creating transaction code in SE93, u might have selected radio buton Program and screen (dialog transaction)
It should be 2nd option Program and selection screen (report transaction)
Create another transaction code selecting radio buton Program and selection screen (report transaction) and run the transaction code. It will work

CLIENT_HOST the (body part) to be multi line

Dear All,
Am using Oracle Developer Suite 10g "Form Builder"
I am using the following Code:
CLIENT_HOST('rundll32.exe url.dll, FileProtocolHandler "mailto:xx.xx@com?subject=mysubject&body=mybody"');
I need the (body part) to be multi line
Example:
-- Start example --
Dear Sir,
Kindly find the following number ----- for your information
Best Regards
-- End example --
Can anyone help me
Best Regards
Adel Hafez

Have you tried creating a variable for the body and using chr(10) or chr(13) to do the multiline?.
i.e.
vc_body :=
"Dear Sir," || chr(10) ||
"Kindly find the following number" ||chr(10) ||
"--------------------------------------------------------------------------------" || chr(10) ||
" for your information" || chr(10)
"Best Regards" ;
Then in your client_host you just concatenate the variable.
CLIENT_HOST('rundll32.exe url.dll, FileProtocolHandler "mailto:xx.xx@com?subject=mysubject&body=" || vc_body);
Edited by: Rodolfo Ferrari on Jun 17, 2009 4:00 PM

Why is the last part of the Word Press install not working?

I am installing Word Press to work in Dreamweaver. I have installed MAMP and everything is working fine, I assume. The location of the files are /applications/MAMP/htdocs/wp-content/themes/twentyten.
I have installed PHP/MySql on my machine and have set up the wordpress database as instructed. The last part of the process has me bogged down. In following step one of the process, I get a blank screen. Here's the url: http://localhost/wp-admin/install.php and the instructions to complete the process.
With the WordPress files copied to the correct location in the htdocs folder, the web server installed, and a database created, open a browser and browse to http://localhost/wp-admin/install.php.
A screen telling you to create a configuration file will appear. Click the Create a Configuration File button.
Click the Let’s Go button to go to a page that allows you to enter your database information.
Type your database name, wordpress.
Type your MySQL user name and password (usually the user name and password are both admin, unless you changed them in the database).
For the Database Host type localhost.
Click Submit
Can anyone help?
Thank for your help,
GWalton55

I'm stuck installing virtualhosts in DW and using Wordpress templates, but I may be a few steps further than you are, so I'll try to help. I'm also using Windows, so who knows?
I'm assuming you are not using a virtual host, just a local host; therefore, I went to the section that has instructions for the steps you are on in David Powers' "Adobe Dreamweaver CS5 with PHP: Training from the Source" and right after he has you launch the browser and open "wordpress/wp-admin/install.php" in "your [site name here] site." He goes on to write:
The URL depends on how you set up your testing environment:
Virutal host: http://[site name here]/wordpress/wp-admin/install.php
Localhost: http://localhost/[site name here]/wordpress/wp-admin/install.php
NOTE: if you are using the MAMP default ports on a Mac, add :8888 after [site name here] for a virual host, or after a localhost.
So perhaps that's what you're missing, I really don't know.
Good luck!

Elements 9 Projects plays fine on computer however when burned to a DVD it drops the last part

Hello,
this is my first post and first Question ever on Adobe site. I hope thatt someone can help. I have used Elemenys 3.0 for a number of
years. I have now upgraded to Elements 9. I am having an odd problem with a project that I am working on. Everything seems to be OK on the EDIT
and on the DVD PREVIEW mode ; However when burned to a DVD, I am loosing the last part of the project, and the laat scene button does not take me to the correct scene, It takes me to the one just BRFORE it. When the burning process is done, it shows that it all went well. No error messages. Does anyone have any thoughts as to what is causing this?

hi photonutguy,
Since your question is about burning your video to a DVD disc, it is actually an Adobe Premiere Elements question. This forum is specifically about Photoshop Elements and is frequented by people who use Adobe Photoshop Elements for their photos.
there is a separate forum for Adobe Premiere elements where you will find the people knowledgeable in the video process for burning that DVD with menus at
http://forums.adobe.com/community/premiere_elements
So I recommend that you post your question at that Premiere Elements forum .

Ipod cuts the last five seconds off songs

My ipod allways cuts the last five seconds off songs. How do I stop it doing this?

Hi, Try deleting album artwork from songs on the ipod. Worked for me.

When i sync my iphone5 on my computer with itune the last part does not stop sync download safari i dont know why is not sync and i cant stop it i am try to download some song and this thing cant stop sync help?

when i sync my iphone5 on my computer with itune the last part does not stop sync download safari i dont know why is not stop sync and i cant stop it i am try to download some song and this thing cant stop sync help?

Hi,
/Users/sarahschadek/Desktop/Safari.app/Contents/MacOS/Safari
Move the Safari app from the Desktop to the Applications folder.
Restart your Mac.
That's why you see this:
When I try to do the updates my computer says it has ready it goes through like it is downloading them then at the end it says some of the files could not be saved to "/" files.
After your restart your Mac, click the Apple  menu (top left in your screen) then click: Software Update ...
Carolyn

The theme/background (AWESOME futuristic space scene) shown in the last part of "Getting Started video available for download?

In the last part of the video "Getting Started" right after I downloaded Firefox 4, there was a background scene of an awesome page that showed some futuristic space scene that has the mozilla theme (fox) in the picture. I would like to know if it is available for download and/or it's name. I searched through the themes, but they don't show enough of the theme to actually see what the background would be once downloaded. Thank you in advance for any help you can offer.
Gina Taylor

Maybe you like this video as well:
* http://vocamus.net/dave/?p=1233 Flight of the Navigator
* http://videos.mozilla.org/serv/mozhacks/flight-of-the-navigator/
* http://blog.vlad1.com/2010/12/21/webgl-in-firefox-4-beta-8/

Multi track project shows audio track 1 & not 2 need help!!!!

hello everyone... Have a sequence in fcp 1 video track 2 audio tracks i right mouse click the sequence go to send to click on multi track project it sends to soundtrack pro but only track 1

This would frustrate me in the beginning and sometimes it will come back to me. I'll blame that on the Pro tools I have installed. Make sure that device is enabled in controll panel, hardware. Disable the ones you don't use. I don't think AA will recognize usb or firewire hardware if that is what you have. Needs to be a card. I use the M-Audio Delta L1010. 8 inputs. I use 8 direct outs from my mixing board into the 8 inputs on the card. Sounds very good for the price.
Good luck.
Donnie

I have an iPhone 5 from India. I am going to USA for studying. Can I use the same iPhone over there or I will have to buy a new one?

I have an iPhone 5 from India. I am going to USA for studying. Can I use the same iPhone over there or I will have to buy a new one?

If officially unlocked, you can purchase a sim from one of the two nationwide GSM carriers, AT&T or T-Mobile. However, AFAIK, none of the carriers in India offer unlocking for the iPhone. Thus, if your phone is carrier locked, the only way it will work in the US is roaming...that would cost a fortune.
So, if you have a carrier locked iPhone, leave it home or sell it before you come to the US, then purchase an officially unlocked iPhone, from Apple, when you get to the US. You'll be able to use that phone in India when you go back.

HT204053 i have 2 apple ids and one is from years ago when icloud wasnt a thought but now somehow it became my primary apple id and i cant photo stream with the apple id i use. Even if im signed into my old one the photo stream doesnt automatically go to

i have 2 apple ids and one is from years ago when icloud wasnt a thought but now somehow it became my primary apple id and i cant photo stream with the apple id i use. Even if im signed into my old one the photo stream doesnt automatically go to my mac. Im not exactly technology savy but id love to figure this out.

I have also noticed the same "problem". I do not fully understand the impact of using the same ID on multiple computers and devices if I want to keep them all in sync.

My nephew lost the paired Apple TV remote and now I can't pair a new one with it. How do I unpair the lost remote without pairing another remote?

My nephew lost the paired Apple TV remote and now I can't pair a new one with it. How do I unpair the lost remote without pairing another remote?

See this official Apple article on how to unpair your remote with an Apple TV.
http://support.apple.com/kb/HT1555?viewlocale=en_US&locale=en_US
Let us know how this works for you.
Also, are you positive the battery in your Apple TV remote is good?
Never hurts to check or ask.

I have 2 imac computers and here are my questions: first, how to I transfer the information from my contact directory from my old imac into my new imac and once the information is transfered how can I print it? Second: I have a large music collection in m

have 2 imac computers and here are my questions: first, how to I transfer the information from my contact directory from my old imac into my new imac? Once the information is transfered how can I print it? Second: I have a large music collection in my old Imac computer how do I transfer this information to my new computer? Also how can I share this information with other computers at home?

I think you may find helpful information here:
A Basic Guide for Migrating to Intel-Macs
The Knowledgebase article Intel-based Mac: Some migrated applications may need to be updated refers to methods of dealing with migrating from PowerPC chips to Intel with the Migration Assistant safely. The authors of this tip have not had a chance to verify this works in all instances, or that it avoids the 10.6.1 and earlier Guest Account bug that caused account information to get deleted upon use of the Migration/Setup Assistant. However, a well backed up source that includes at least two backups of all the data that are not connected to your machine will help you avoid potential issues, should they arise. In event it does not work, follow the steps below.
If you are migrating a PowerPC system (G3, G4, or G5) to an Intel-Mac be careful what you migrate. Keep in mind that some items that may get transferred will not work on Intel machines and may end up causing your computer's operating system to malfunction.
Rosetta supports "software that runs on the PowerPC G3, G4, or G5 processor that are built for Mac OS X". This excludes the items that are not universal binaries or simply will not work in Rosetta:
Classic Environment, and subsequently any Mac OS 9 or earlier applications
Screensavers written for the PowerPC System Preference add-ons
All Unsanity Haxies Browser and other plug-ins
Contextual Menu Items
Applications which specifically require the PowerPC G5 Kernel extensions
Java applications with JNI (PowerPC) libraries
See also What Can Be Translated by Rosetta.
In addition to the above you could also have problems with migrated cache files and/or cache files containing code that is incompatible.
If you migrate a user folder that contains any of these items, you may find that your Intel-Mac is malfunctioning. It would be wise to take care when migrating your systems from a PowerPC platform to an Intel-Mac platform to assure that you do not migrate these incompatible items.
If you have problems with applications not working, then completely uninstall said application and reinstall it from scratch. Take great care with Java applications and Java-based Peer-to-Peer applications. Many Java apps will not work on Intel-Macs as they are currently compiled. As of this time Limewire, Cabos, and Acquisition are available as universal binaries. Do not install browser plug-ins such as Flash or Shockwave from downloaded installers unless they are universal binaries. The version of OS X installed on your Intel-Mac comes with special compatible versions of Flash and Shockwave plug-ins for use with your browser.
The same problem will exist for any hardware drivers such as mouse software unless the drivers have been compiled as universal binaries. For third-party mice the current choices are USB Overdrive or SteerMouse. Contact the developer or manufacturer of your third-party mouse software to find out when a universal binary version will be available.
Also be careful with some backup utilities and third-party disk repair utilities. Disk Warrior, TechTool Pro , SuperDuper , and Drive Genius work properly on Intel-Macs with Leopard. The same caution may apply to the many "maintenance" utilities that have not yet been converted to universal binaries. Leopard Cache Cleaner, Onyx, TinkerTool System, and Cocktail are now compatible with Leopard.
Before migrating or installing software on your Intel-Mac check MacFixit's Rosetta Compatibility Index.
Additional links that will be helpful to new Intel-Mac users:
Intel In Macs
Apple Guide to Universal Applications
MacInTouch List of Compatible Universal Binaries
MacInTouch List of Rosetta Compatible Applications
MacUpdate List of Intel-Compatible Software
Transferring data with Setup Assistant - Migration Assistant FAQ
Because Migration Assistant isn't the ideal way to migrate from PowerPC to Intel Macs, using Target Disk Mode, copying the critical contents to CD and DVD, an external hard drive, or networking will work better when moving from PowerPC to Intel Macs. The initial section below discusses Target Disk Mode. It is then followed by a section which discusses networking with Macs that lack Firewire.
If both computers support the use of Firewire then you can use the following instructions:
1. Repair the hard drive and permissions using Disk Utility.
2. Backup your data. This is vitally important in case you make a mistake or there's some other problem.
3. Connect a Firewire cable between your old Mac and your new Intel Mac.
4. Startup your old Mac in Transferring files between two computers using FireWire.
5. Startup your new Mac for the first time, go through the setup and registration screens, but do NOT migrate data over. Get to your desktop on the new Mac without migrating any new data over.
If you are not able to use a Firewire connection (for example you have a Late 2008 MacBook that only supports USB:)
1. Set up a local home network: Creating a small Ethernet Network.
2. If you have a MacBook Air or Late 2008 MacBook see the following:
MacBook (13-inch, Aluminum, Late 2008) and MacBook Pro (15-inch, Late 2008)- What to do if migration is unsuccessful;
MacBook Air- Migration Tips and Tricks;
MacBook Air- Remote Disc, Migration, or Remote Install Mac OS X and wireless 802.11n networks.
Copy the following items from your old Mac to the new Mac:
In your /Home/ folder: Documents, Movies, Music, Pictures, and Sites folders.
In your /Home/Library/ folder:
/Home/Library/Application Support/AddressBook (copy the whole folder) /Home/Library/Application Support/iCal (copy the whole folder)
Also in /Home/Library/Application Support (copy whatever else you need including folders for any third-party applications)
/Home/Library/Keychains (copy the whole folder) /Home/Library/Mail (copy the whole folder) /Home/Library/Preferences/ (copy the whole folder) /Home /Library/Calendars (copy the whole folder) /Home /Library/iTunes (copy the whole folder) /Home /Library/Safari (copy the whole folder)
If you want cookies:
/Home/Library/Cookies/Cookies.plist /Home/Library/Application Support/WebFoundation/HTTPCookies.plist
For Entourage users:
Entourage is in /Home/Documents/Microsoft User Data Also in /Home/Library/Preferences/Microsoft.
Credit goes to Macjack for this information.
If you need to transfer data for other applications please ask the vendor or ask in the Discussions where specific applications store their data.
5. Once you have transferred what you need restart the new Mac and test to make sure the contents are there for each of the applications.
Written by Kappy with additional contributions from a brody.Revised 5/21/2011

RENAME: When I rename a photo why can I not find it doing a search? The photo obviously keeps its old name even though it has a new one IPhoto 09

When I rename a photo why can I not find it doing a search? The photo obviously keeps its old name even though it has a new one> IPhoto 09

Thanks, that makes sense. If I do a search in IPhoto I find it. I have 6 grand children and also have had my camera for quite awhile and it starts file names over again after 10,000 pictures. (I don't have all these on the computer) but now I have some files with the same name ie img_4 and img_4
Thanks again for your help!!
HC

Cutting the Last Part of a Multi-Track Project & Pasting It Into a New One

Similar Messages

Maybe you are looking for