CV04N Dump in Object Link

Hi,
I have developed Object Link to ML81N. This linkage is working fine.
when i go to CV04n by entering the Document type and then click on Object link and choose the tab as service entry sheet its going for dump.
Dump history shows that Dynpro does not exist
"DYNPRO_NOT_FOUND" " "
"SAPLCV100" or "LCV100O01"
"INIT_404"
I hv included my custome screen in SAPLCV130. i dnt hv any issue in cv01n, cv02n,cv03n.
Plz help me to resolve this issue.
Regards
Janani.

Hi Janani,
This error is typically observed incase a object maintained for one of the document types uses a non-existing screen number.
This behavior can be corrected by entering the right screen number or removing the object in the customizing.
You may find more details in the wiki links below:
http://wiki.sdn.sap.com/wiki/display/PLM/PerformanceinCV04N-Timeout+Dump
http://wiki.sdn.sap.com/wiki/display/PLM/DYNPRO_NOT_FOUNDDumpin+CV04N
Regards,
Pradeepkumar Haragoldavar

Similar Messages

Object Link to Batch Number (MCH1 & MCHA)

I am trying to link a DIR to Batch Number.
For this i tried object MCH1(Batch Number without Plant) & MCHA (Batch Number with Plant).Screen Numbers for MCH1 is 264 & for MCHA is 265.
After making the reqd. configurations, ie. defining object links for Document Type as MCHA & MCH1 when i go to transaction CV01N i can see the tab for MCH1(screen number 1264) and no tab is available for MCHA(1265).
And when i go for CV04N, and try to search for same document type with the help of object links then both tabs are visible there. But now in these tabs material column is not visible, only Batch column is visible for MCH1 and Batch & Plant column are visible for MCHA. I have already checked the Table settings - there is nothing wrong with it.
Please guide me why such problem is occurring instead of maintaining all configuration properly. Is there anything that i have missed?
Points for helpful answers.

Hi Christoph,
Thank you for quick response.
Looks like I was not clear in my query.
What I have done is as following:
1.Maintain Screen for Object Link: Here I maintained the objects MCH1 & MCHA with screen numbers 264 & 265 respectively. And also maintained value 1 for Authorization.
2.Define Document Type >> Define Object Link: Then I have assigned these 2 objects to the particular Document Type with DC10 along with respective screens.
Now when I go to CV01N and go to object links I can see only 1 tab which contains Material & Batch which I guess is visible because of MCH1 (Screen number 264).
But I am not able to see the other tab which should contain Material, Batch & Plant as defined in the screen 265 for object MCHA.
Second problem is when I go to CV04N, and enter the Document Type and go to object link tab, I can see 2 tabs. But one of these tabs has Batch & Plant Column and the other tab has only Batch column.
Please help me out with this. Thank you.

Object Link to Inspection Point (QAPP)

I am trying to set up a new obejct link to an inspection point. So, to start with I am trying to create a bespoke screen that will perform exactly as screen 204 the Equipment master object link.
I have created two new screens SAPLCVIN 9000 and SAPLCV00 9000 by copying SAPLCVIN 204 and SAPLCV00 204. I have assigned these screens to the new object type QAPP and assigned this to the document type. I have copied the EQUI settings in the Key Fileds table and assigned them to QAPP.
I have also copied the function module OBJECT_CHECK_EQUI into OBJECT_CHECK_QAPP but have not yet made any changes to the code in this function module. When I try to view the new screens in CV02N I get a short dump telling me that DYNPRO 9000 is not found.
Presumably this is because I haven't made any code changes to the function module. At this stage I haven't even changed any of the fields from screen 204 I'm just trying to eliminate the abap dump. Can anybody help me with this please?

1. Copy FM QAPP_CUST_IP_PROPOSAL and use this in your inspec. point identire conguration in the Default for user fields in results recording. You have to provide all the logic in the FM to identify the next serial number. You can also us a copy of the FM QAPP_CUST_IP_CHECK in the verification of user fields to check to make sure the serial number wasn't already specified in an earlier lot is the next in the series. Again, you have to put in the correct logic.
2. I think you are looking for the drop down list in this question. Use FM QAPP_CUST_IP_F4 for this. You can either develop a new new FM for each inspec point identifer you use, and hard code the values into the FM, or create a Z table that your FM references to look up the appropriate values for the insepction point and user field.
3. Same as number 2 above.
FF

Document object link information

Hi Experts,
We are working with documents linked to WBS elements and networks. Now, we need to know which objects have links to a certain type of document without using development.
We have explored several solutions:
Using Object Link tab on CV04N - it is not working, since PRPS object links don't allow wildcards
Extracting to an excel file the information on a certain document on the object link tab - how can we extract it?
Using some report????
We know info is stored on table DRAD but we need to extract the information through user transactions.
Any suggestion will be appreciated.
Thanks.
Kind regards,
Neil

Dear Neil,
the easiest way for achieving this function without special developmentwould be to use transaction SE16 and made the selection for table DRAD.
Maybe function module 'CV100_OBJECTLINK_SEARCH' could also be useful for you. This module is also used in CV04N search. Here you can enter a value for the document type (STDOKAR) and a search criteria for object type (OBJECTLINKS). At OBJECTLINKS just enter the object type (e.g. MARA) and value '*' for the object key.
Best regards,
Christoph
Edited by: Christoph Hopf on May 7, 2009 1:43 PM

DMS-Search via object Links

Hi Experts,
I am new to the DMS Module and have some queries- I have attached a DIR to a PR and PO and in CV04N, while I am doing search with object links,either when one value is correct , the DIR is showing,(like an OR Gate). i.e when PR is correct and PO is wrong, it is showing the DIR or when PO is correct and PR is wrong, it is still showing the DIR. So, is this a standard feature or is there any configuration change I need to do?
Thanks in Advance

Hi Aravind,
step-1 create doc.type for PO in DC10 (IMG tcode)
step-2 select doc.type,click left side define object link,here you have to assign the PO table EKPO.
step-3.for more information check below notes.
Note 880077: Performance problem using object links
Note 885977: Extension to note 867241 on object links
Note 926060: Extension of note 885977 for object link Purchase Order
Note 960202: Object Links Deleted While Adding New Objects
Note 1002648: Wrong behavior while using RFC_CHANGE_DOCUMENT_MASTER.
Regards,
M.Arunkumar
SAP PLM Functional consultant.

Easy DMS create object links

Hi,
I cannot create object links from within the EasyDMS SAP properties screen for a document. However if I edit the document using the SAP GUI and create object links there, I can view it through EasyDMS. Could somebody tell me what the issue could be
thanks!
ps: I am using sp06 patch level1

Hi Athol,
Since it does not show any errors how do I get to the short dump? Secondly I also notice that there is some other functionality eg drag and drop of multiple originals onto a DIR which does not work. When I try it with another SAP installation everything works perfectly. The installation which is giving me problems is an ECC 5.0 one. Any details on what components/interfaces/packages etc which must be on their? Maybe that is an issue.
thanks,
Rahul

Object link BOM header doesn't work

Hello,
We are in version 4.6C (standard) and I have a following problem with DMS.
I have created a document type and assigned object links STKO_DOC BOM header (screen 258). I have created other document type quite similar, just with different object links, and they work just fine. However, when I create or change my document type with tra CV01N or tra CV02N I cannot see the sheet for assigning the BOM header. I have no error messages. I have tried to compare to the standard document types and simply cannot find out what's wrong.
If I go to the tra CS02 (BOM) to assign my document - I cannot - because the list doesn't show it even though I can see it using CV02N -- CV04N.
I tried to add also object link BOM item (screen 257) but without help.
Can anybody help with this - thank you in advance.
Pipsa

Dear Pipsa,
please see SAP note 956853 and make sure that the necessary objects are maintained correctly in customizing.
Best regards
Christoph

Adding new field to detail data screen of object link

Hi All,
I've a requirement of adding a new field to the detail screen of object link. But the field is a combination of 3 other standard fields.
Please let me know how could i realise this functionality?
Thanks in advance.

Hi Srini,
Thanks for your Reply
I have kept 01 against the field BSEG-AUGDT and selected the preselect check box also.
But still that field is not visible in the dynamic selection screen.
Thanks
Ajay.D

OLE objects linked to MS Word/MS Excel do not update in InfoView

I am facing the following problem:
- Embedded a Word document as linked OLE object into a crystal report and stored it to Enterprise repository.
- When opening the report with CR Developer from my workstation, links are updated and changes made in the .doc file are reflected, the report is updated
- However when displaying and refreshing the report in InfoView changes aren't reflected.
The OLE link (type document) is set to update automatically. I tried to store the report to the enterprise repository with and without data. Yet no difference - no update in either case. Neither scheduling nor opening and refreshing the report in InfoView helps.
I further inserted an OLE object linked to a bmp image, and for the image refreshing works, even in InfoView
So am I doing something wrong?
Some threads in this forum indicate that only OLE linked pictures (bmp, jpg) can be refreshed dynamically, e.g.
[Dynamically change path to OLE file]
Others indicate that it is also possible to dynamically refresh OLE objects linked to .doc, e.g.
[Re: Link to Word document doesn't refresh when running from Infoview]
- Is it at all possible to dynamically display the contents of .doc or .xls files in a CR when viewing and refreshing the report in InfoView (without the need to reopen and resave the report with CR Developer first) ?
- We are using BOE XI3.1 SP3 and Crystal Reports 2008 SP3. On the BOE server Crystal Reports Developer is not installed. Can this be a prerequisite for the OLE links to update in InfoView?
- Any other suggestions?
Thanks
Konrad

Hi Don,
Thank you for the quick reply.
- You say that this works in CR Designer. That's right. As described above, even I can open the report with CR Designer and the links are getting updated.
- However if I do not reopen and resave the report with Designer ... if I just open and refresh the report in InfoView to get the updated information from the files ... changes are not shown. I face this problem ONLY with ole links to .doc and .exe. OLE links to image formats such as .bmp do work. WHY?
My files are already stored locally to the BO server and the (changed) image files are read and updated from exactly this directory. But not the linked Excel and Word files...
Thanks
Konrad
Edited by: Konrad Hartl on Jan 25, 2011 8:04 PM

Is there a limit on number of object links to DIR, and any impacts of this

Hello All,
Can you please let us know if there is any limit on the No of Object links to be maintained in the Object Link tab of DIR,
Our major Concern comes as there is One DIR logo / symbol, which is maintained in most of the Material Master around 1000s
and also the same DIR is used in all the Service and maintenance Notification as an Attachment, so the list of Object link in DIR Object link tab is going beyond control above 10000s,
i wanted to know if there is any limit on no of Object links to be maintained in DIR object links, and is there any impact on DMS functionality if the list is ever increasing,
( also can i know if there is any workaround that the DIR is only displayed going in to Material master or Notifications but the same is not listed in the DIR object links tab as here it is going on increasing,)
Thanks and kind regards
Kumar S

Hello Christoph and Every one,
Thanks for the responses given, and providing a hint not to have many Object links, as it could be an performance issue going to the DMS DIR Object link TAB,
But in this particular case we are not assigning the Objectlinks going by the DMS Object links TAB, but it is done in other way round, going by the Equipment or Notification Screens,
There are few Health and safety document ( Which is created as a DIR in DMS) which needs to be assigned in Most of the Equipment and the new notifications created, and this document DIR is assigned from the Equipment and notification Screen,
And we may not be interested to go to the DIR to browse and Assign the Object Links, so as we do not frequently go and check the DIR or Use DIR Object link TAB for Object Link assignment will it in any ways cause performance Issue here??
And also as asked earlier can we have a one way attachment like the DIR is Visible in the Equipment or Notification Screen, but the DIR is not adding up the Equipment or Notification details in its Object links TAB, (by development or it is totally illogical to ask for)
Thanks and Kind regards
S Kumar

Opening a new window when clicking on object links

Hi,
I have installed business package for crm and configured the object links, but when i click on object links, it is opening a new window, but i want it to be opened in the same window form which that link was activated.
could you please help me in this regard
Thank you

Hello Koduru,
you should have a look at the work protect modus settings of the user.
Regards
Gregor

CProjects - Adding a new field to the detail screen of object link

Hi All,
I've a requirement of adding a new field to the detail screen of object link. But the field is a combination of 3 other standard fields.
Please let me know how could i realise this functionality?
Thanks in advance.

Hi Srini,
Thanks for your Reply
I have kept 01 against the field BSEG-AUGDT and selected the preselect check box also.
But still that field is not visible in the dynamic selection screen.
Thanks
Ajay.D

Error when attaching object link in DMS

Hi Experts,
I am calling the function module CV110_DOC_CREATE in my program. This program i have attached to a ztransaction.Thus the screen after entering the document type, document version and part in the cv01n transaction appears when my ztransaction is executed. But the problem is that i can attach object link (document info record) when the ztransaction is executed initially. But when i click on back button and again comes to the screen i am not able to attach the object link.Then it gives an error as " Object does not exist". Please help.

When the back button is clicked screen for my ztransaction comes.From there it is calling the actual screen to attach the object link.there i am trying to attach the object link again...then it is saying as object does not exists. This same dir i have attached earlier as object link when the ztransaction was run initially.

Creation of new object link for DMS

i have searched a lot about Creation of new object link for DMS on internet .
and all replies focus on that documentation :
1. Program two screens for the following module pools for the SAP object that is to be linked additionally:
u2013 SAPLCV00
u2013 SAPLCVIN
The process logic must be according to that of screen 0204 in program SAPLCV00 and must not be changed.
2. Create the function module OBJECT_CHECK_XXXX (XXXX = name of the SAP object).
i need to know how to implement that in more detailed step by step
as i know DMS and abap also.

Hi Reda,
Hope the below URL will help to understand how the Process of adding a object link works.
Enhancement Without Modification of the Object Links - Engineering Change Management (LO-ECH) - SAP Library
Thanks & Regards,
Seshadri.

Display an error message in Portal during creation of Object Link

Hi,
I have a requirement where I need to throw an error message in Portal during creation of Object Link.
The requirement is whenever the user clicks on Item and try to create a Object Link for Material-Plant combination, if the Mat-Plant combination exist, than I have to throw/display an error message.
I tried for some enhancements in BAPI_BUS2172 but it does not work out.
Please help.
Thanks in advance.
Arbind

Hi,
If you include the UI, it will display at the top of the screen..
Please see below how to create a message in the message editor.
http://help.sap.com/saphelp_nw04/helpdata/en/72/1d6526263ff24995016a152705eab2/frameset.htm
and this is how you access the error message in the application ti display it to the end user
http://help.sap.com/saphelp_nw04/helpdata/en/72/1d6526263ff24995016a152705eab2/frameset.htm
Regards,
Ganesh N

CV04N Dump in Object Link

Similar Messages

Maybe you are looking for