CVCs are getting deactivated in Product Allocation Group
Hello Everyone,
We recently implemented OSS note 1254342 as we were getting dump while transferring CVC from Planning area to Product Allocation Group. But now after that note is transported we face new issue as sometimes all the CVCs in Product allocation group are getting deactivated. The original issue is resolved now. If anyone has any idea about it please let me know.
Thanks
Nitin
Hi Experts,
Please help me on this.
Regards,
Ajit
Similar Messages
-
We are getting Licensing for product stopped working error on Mac OSX 10.6 computers
We are getting error " Licensing for this product has stopped working. This product has encountered a problem which requires that you restart your computer before it can be launched. If you continue to see this message after restarting your computer, please contact either your IT administrator or Adobe technical support for help, and mention the error code shown at the bottom of this screen. Error: 150:30 http://www.adobe.com/support/"
We have tried restarting the computer and still get the error message. What else can we try to get this running again. We are using Mac Computers running OSX 10.6.8.http://helpx.adobe.com/x-productkb/global/error-licensing-stopped-mac-os.html
-
Leading zeros in the Product allocation characteristic combinations.
Hi All,
I am copying Characteristic combination from planning area to product allocation group, after i complete the transaction system is automatically preceding the zeroes to the product number.
I have one the following activities before copying CVC of planning area to product allocation group.
against all the Product allocation settings.
2.Created the MPOS with product (characteristic length of Product is 18), Customer and Allocation object.
3.Created planning area and planning book.
4.Copied cvc combination from planning are to product allocation group and also copied planning area values in to Product allocation group.
5.Tried to check in the ATP simulation mode, while I was doing system has given no characteristic combination found, when I checked Product is preceding zeros as per the filed MATNR length 40 and this MATNR is selected from the Product allocation field catalog, But when I add zeros to product system is performing Product allocations in simulation mode.
6.Tried triggering gATP Product allocations by creating Order in ECC, here also it has given same error No characteristic combination exists.
When I did initial R&D on this. I found that material number in the product allocation characteristic combination is leading by zeros for ex:- 000000000000000002200325.
Could any one please suggest me what to do on this.
Thanks and Regards,
T.MuthyalappaHi Muthyalappa ,
If i have understood your question properly , then my guess is you should be facing this problem only for numeric material codes. Try out the following things
1. Execute the same test condition for a non numeric material. I believe it will work perfectly .
2. For numeric material codes it is not working because of the difference in MATNR length between ECC and APO. In ECC the maximum possible MATNR length is 18 char whereas it is 40 chars in APO. So as per std SAP functionality the numeric materials get concatenated with leading zeros when you try to transfer it (or carry out any kind of processing ) from ECC to APO.
ex consider material 12345. In ECC it will be stored internally as 13 leading zero's followed by12345 . But in APO it will be stored as 35 leading zero's followed by 12345. Your issue is the system does not recognize the CVC that has this material as characteristic. At the time of cvc creation / change make sure your material characteristic ( especially for numeric material codes) totally has 40 chars . Pack it with leading zeros and make the material length 40.
Try this out and update me .
Thanks
Saradha -
Unable to confirm quantity on the sales order --- Product allocation issue
The following configuration steps were completed in the APO system.
1. Maintain Product allocation object
2. Maintain Product allocation group
3. Maintain Product allocation procedure
4. Create planning object structure with the necessary characteristics
5. Maintain characteristic combination
6. Create Planning area with necessary key figures
7. Create Planning book and data view
8. Maintain connection to planning area
9. Generate Product allocation group objects
10. Generate characteristic combination from planning area
11. Allocate the stock for the CVC combination
12. Assigned the product allocation group to the APO product
Regardless of quantity in the planning book, it is confirming all the quantity on the ECC sales order. This is due to the material availability date being pushed out to 12/31/2011 which seems to be the last date of the planning area time series. The values on the planning book were maintained online (manual step).
Also when I run the simulation of product allocation under GATP>Reporting>Product allocation,
For the product allocation group and the combinations that I have, I get the message "No allocations defined for the current characteristic combination"
Any help would be greatly appreciated.
Thanks
AshwinDear Ashwin,
I would recommend to use the transaction /SAPAPO/ATPQ_CHKUSG. Enter the PAL group and do the following:
First: run the transaction with the 3rd option. Select all assignments found by the report then press the button delete with incoming order qty -> this deletes all assignments without any order number
Second: run the transaction again with the 1st option. Select all entries. press the button "merge PAL assignments", press button execute, choose on the first popup "yes" and on the second popup "no" -> this should correct the shortages.
Check the note 676128 to get further information about the //ATPQ_CHKUSG and the options.
I hope this helps.
Regards,
Tibor -
APO product allocation and customer hierarchy groups
Hi,
we have customer hierarchy groups. In the future we want to use product allocation in APO.
The values of the customer hierarchy groups will be changed often.
How can we map the customer hierarchy group to a product allocation group?
Thanks,
MichaelHi Michael,
Not sure it is the only way but you can try the following,
1. maintain the field catalogue and the product allocation group in APO
SPRO
Advanced Planning and Optimization
> Global Available-to-Promise (Global ATP)
> Product Allocation
2. Maintain the planning area accordingly
(+ the connection to the PA - still in SPRO...)
Now start the real thing:
3. pass the customer hierachy to the sales order in R/3
You can use exit: MV45AFZZ u2013 form USEREXIT_MOVE_FIELD_TO_VBAK
4. Pass the information to APO
A new exit: FV45VFZY form USEREXIT_CATALOG_VALU - Adding to the APO field Catalogue
Now you mentioned frequent hierarchy changes... that I don't know how to handle. When you change the hierarchy how do you want the consumption to happen? I guess the new sales order should consume the new hierarchy, but what about the old assignment?
If somebody know ho the system handle that, that would be great!
Thanks and Regards
Julien -
Issue with Product Allocation Scenario
I am Trying out Product Allocation in APO (SCM 5.0).
Relevant setup in SPRO - Product Allocation Object, Group, Procedure, Sequence etc., Planning Object Structure, Planning Area, CVC generation, Connection between Planning Area and Product Allocation object in GATP, assignment in Location Product Master (at Customer Location) Product Allocation Procedure, Check mode, ATP Group has been done in APO.
After entering data in appropriate keyfigures (Allocated Qty) it shows up under GATP>> Reporting >> Product Allocations >> Time Series per CVC
Have carried out ATP Simulation to check that for a given product at Customer the Product Allocation against a Required Quantity takes place correctly.
Now trying to carry out the Product Allocation check by creating a Sales Order in ECC. In that case during the material availability check screen in APO, the product allocation does not show up.
I believe it is related to master data settings for the product in ECC. My questions are as follows:
1. In ECC the product exists at the manufacturing plant only (and not at customer as in APO). There in MRP3 tab Strategy Group is maintained. Is this along with Availability Check field responsible for determining the check instruction (combination of check mode + business event) in APO for the Product Allocation check.
2. If so (which I guess it is) I can see the check instruction picked up in APO while creation of sales order in ECC is different from the check instruction I ran simulation with. How can I ensure the same check instruction is chosen (in which case I believe the availability check result will be same as the ATP Simulation carried out in APO).
3. In APO I ran simulation for the product at customer location (and maintained the required ATP settings in the product master). In case of Sales Order creation in ECC how does system pick up the Check Mode and Business Event for the product (having Sold-to as customer and Supply Plant as the plant code) and use it in APO.
4. Any other setting/configuration that is missed causing this behaviour.
I guess some of the questions is a bit hazy but I would appreciate if someone can outline the Product Allocation Scenario. I am trying out based on Building Block S59 Demand Planning for Product Allocation but of course it does not detail out enough.
Disclaimer: My knowledge of GATP is almost nil but am exploring.
Thanks,
SomnathHi Somnath,
It will be a pleasure to help you out.
Firstly I will list out all the steps which I can think of:
(1) R3-You have moved all the ATP customizing from R3 to APO via ATP integration model.
(2) APO- goto SPRO>APO>GATP>General Settings>Maintain Check Instructions
Here go to Check Mode- 041 and Business Event- A and maintain the following settings manually in development and migrate it all the way to Production
I am assuming here that you want to first do an allocation check and then availability check**
Product Allocation: Change from NO CHECK to First Check
Product Check: Change from First Check to Second Check
This check mode and business event is the most common one which is triggered while placing a sales order
See the following blog for DETERMINATION OF CHECK MODE
http://solution-timezone-issue.blogspot.com/
There might be other check modes( 030, 050) which might also require this change. However you can judge that while placing a sales order and when you go to the availability screen, You have the tab - SCOPE OF CHECK CONTROL where you can see the Check Mode + Business Event
Following guidelines can be used to modify Check Instrctions after Customizing Import from R/3
1. Business Event A* is Sales Order Entry (The main scope of GATP) so define check instructions for all check modes since it is not possible to identify the requirement class that may come over on an order. For Business Event A* if availability check was being done in R3, then define check instructions with Allocation as first step, then Availability check as second step. Else if no availablity check in R3 then define check instructions with no availability and no allocation checks.
2. Business Event B* is normally for deliveries but is also required for Rush Sales Orders. An R/3 configuration showed that 041 is the only requirement class that will come across for this business event. Hence defined only for 041 check mode. For Business Event B* if availability check was being done in R3, then define check instructions with Allocation as first step, then Availability check as second step. Else if no availablity check in R3 then define check instructions with no availability and no allocation checks.
3. Business Event 03 required for Inventory Transaction availability check such as MB1C. For such transactions, the APO Product Master Check Mode is used. Hence check instructions for all Check Modes are maintained. For Business Event 03 if availability check was being done in R3, then define check instructions with Availability check as first step. Else if no availablity check in R3 then define check instructions with no availability checks.
(3) Maintain the Product Alllocation Procedure:
<b>a-</b> Create a Product Alloc Object -- Example: PAO-001
In this step, we define the product allocations objects - product allocations are saved per object for a characteristics combination in the product allocation group.
Product Allocation Procedures can be used to maintain different Product Allocation Objects for different time validity periods.
Generally Product Allocation Objects are used to model the different reasons for the need for allocation material shortage, capacity constraint, etc.
<b>b-</b> Product Alloc Group--PAO-1234
A product allocation group defines a group of characteristics against which allocation checking is done.
Creating a Product Allocation Group creates a characteristics directory in the APO database and an area in Live Cache where the key figures are maintained.
If Check Planning Area is set to No then allocation and incoming order quantitiy data can be seen in table /SAPAPO/QTTAB. If the Check Planning Area is set to Yes then no data is stored in this table and the allocation check is done directly against the data in the Planning area.
Detials of allocationconsumption by sales orders are maintained in table /SAPAPO/QTVB in APO and in QTVB in R/3.
If Check Planning Area is set to Yes and if there are users are in the change mode in the Planning Book, Sales Order Entry can get locked out.
If Check Planning Area is initially set to yes and then deactivated later you will no longer see data in /SAPAPO/AC42.
Settings:
Check Planning Area Yes. The reason being that users are not expected to lock planning books as they would be defaulted into the display mode (through a development object). Also most allocation uploads will be through batch jobs. Setting it to Yes reduces one step of moving data between the planning area and the allocation group.
Check Date - Material Availability Date. Consumption of allocation quantity and checking of available allocation quantities is determined by the check date.
Time Bucket Profile Week
Characteristics Product Allocation Object (1), Product (2), Plant(3), Customer(4)
Consumption Period Bwd Consumption 1
Meaning that first the order will consume from current week allocation and then go 1 week backward to consume.
<b>c-</b> Product Allocation Procedure --- PAO-4567
Step Sequence:
<i>Step</i> -
<i>Step Name-</i> -
Prod Alloc Group -
Wild card
1 First Step PAO-1234 9
<i>Alloc Procudure</i> - PAO-4567
<i>Prod Alloc Step</i> -1
<i>Control</i>
<i>Valid from -
Valid to---- -
Object -
Active -
Factor</i>
12/31/2037 PAO-001 Check the Box 1
<b>d-</b> Maintain Connection to Planning Area (APO)
In this step, we maintain the assignment of the planning area to the product allocation group. We must make this assignment because characteristics of the product allocation group have different names from the info objects of the planning area.
All characteristics of a product allocation group must be assigned to an info object. But multiple info objects can be assigned to one info object. It is not always necessary to assign every info object to a characteristic. It is possible for aggregation and disaggregation (depending on the direction of transfer) to take place with info objects that are not assigned.
<i>Product Alloc Group -
Planning Area -
Version -
Time Buckets</i>
PAO-1234 xxxxx 000 W
<i>Characteristic</i>
KONOB - Prod Alloc Obj
MATNR --- Material
WERK -
Plant
XXXXX---- Customer
<i>Key Figures</i>
Order Qty - AMENGE
Alloc Qty - KCQTY
<b>e-</b> Check the Product Alloc Settings
This is only a check- Everything should be green and OK .
(4) You have planned the Characteristic Combination on which you want to do ALLOCATION.
<b>Create a new POS-</b> Which has your chracateristics as PRODUCT, PLANT,CUSTOMER, Product Alloc Object ( 9AKONOB)
<b>Planning Area,-</b> Key figures required are Alloc Qty, Order Qty( Sales Order Qty)
<b>PLannig Book, Data View</b> which has the following characteristics- Product, PLant
Assuming you are allocating at the following CVC level- Product, PLant,Customer
Step 1:
/n/sapapo/MC62-Create Time Series- Basicallly your CVCs -
Example: Product 1234, Plant INDIA, CUstomer WALKART
Step 2:
Move Characteristic Values Combination to Allocation Group (APO)
/SAPAPO/ATPQ_PAREA_K
INput :
Planning Area: xxxx
Prod Alloc Group: PAO-1234
(5) In the INtegration MOdel - Activate the ATP CHECK Integration model for the Plant and material
THis is the KEY which decides whether availability should be done in R3 or APO
Material Active in the integration model -- Means Availability( GLOBAL AVAILABILITY: Prod Alloc+Prod Availability) is done in APO
Material not active in the integration model --- Means Availability Check is done in R3
(6) APO MASTER DATA SETTINGS:
Material Master: On the ATP Tab, Assign Loc Dep Procedure ( Prod Alloc Procedure)
Location Master: Calendar Tab> Create a shipping time stream calendar
Additional Info: Please contact your R3-SD people as this involves a lot of understanding and I have not listed all the details here.
This config shown here is a very basic one which not even 25% of the companies might be using.
If you have any questions on this part- please see my business card and email me**
(7) SCHEDULING: This is a major task which determines the route and transit times for calculating the
Material Availability date
Goods Issue Date
Delivery Date
on the sales order line item- schedule line
I dont know whether you need info on this**There are many ways of doing this
a- Configurable Scheduling
b- COndition records
c- User Exit
You can find documentation in SPRO or else let me know*
For simplicity- Let me take the easiest to create and difficult to maintain master data- Condition Records
Step1 --Define Field Catalog for Condition Table (APO)
/SAPCND/AU01
Require Plant and Route defined here in the field catalog
Step 2- Define Condition Table for Scheduling (APO)
/SAPCND/AU03
Create a new table- 901
901 - Pick Time based on Route with key as Route
902- Route Time based on route
Step 3- Maintain Access for Scheduling (APO)
/SAPCND/AU07
Take the important ones- PICK and TRAN
I am assuming again as I dont know what kind of Scheduling is maintained on R3 Side. Mostly 80% companies have only two lead times- Pick and Route Transit time.**
PICK- Select pick and click on accesses > <i>Acno</i>-10-- <i>Table</i>-901
>> Then save it > and go in again
Select PICK and click on Fields> A popup will appear > Enter the access sequence as PICK--- Enter the access as 10 and click on the GREEn ARROW and save it
TRAN- Select TRAN and click on accesses > <i>Acno</i>-10-- <i>Table</i>-902
>> Then save it > and go in again
Select TRAN and click on Fields> A popup will appear > Enter the access sequence as TRAN--- Enter the access as 10 and click on the GREEn ARROW and save it
Now coming to maintaining the Condition records in APO EASY ACCESS
/SAPCND/AU11
Create SCheduling Step for PICK : Enter condition type- PICK
<i>Enter Route</i>- USCAN --- <i>Duration</i> -24:00 (Hrs)
Create SCheduling Step for TRAN: Enter condition type- TRAN
<i>Enter Route</i>- USCAN --- <i>Duration</i> -48:00 (Hrs)
Now Let me answer your questions:
(1) Question 1- <i>In ECC the product exists at the manufacturing plant only (and not at customer as in APO).</i>
I did not undertsand what you mean here. As we can create a Material at the following locations in APO( Dist Center(DC), Manu Plant(PL), Cusomter, Vendor, etc)
For GATP all we need is the material at a PLant location
STrategy Group on MRP3 tab: This is purely used for determining the CHECK MODE value on APO Product Master.
When this is blank on R3, the check mode will be blank on APO.
However SAP recommends Putting in a strategy group value on R3 Material Master
or
a default Check MOde value for all those Products who have blank check mode- 041 is the best value * This piece SAP hasnt recommended but I found that there is No harm in anyway and it is MANDATORYfor inventory transactions like GOODS ISSUE otherwise you will get a QUEUE in SYSFAIL **
Even if this is blank this has no effect on the GLOBAL ATP as the Check mode for a SD transaction is determined as follows
98% of the SD transactions will generate a CHeck mode of 041 and Business Event- A ***
Through the item category and the MRP type in the MRP view
The item category is derived from the item category group in the Sales view of the material master record and from the order type of the sales document. Together with the MRP type in the MRP view of the material master record, the item category determines what requirements type is selected. The advantage of this method is that the selection of the requirements type depends on the business process (such as quotation, sales order, or repair).
(2) Question 2 - I guess now you must have understood why when you do a simulation in APO, it is taking the Check mode from APO product Master
and when you do a ATP Check from R3, the check mode(041) is different
You dont need to ensure that they are the same- It doesnt matter in anyway.
(3) Question 3- <i>In APO I ran simulation for the product at customer location (and maintained the required ATP settings in the product master).</i>I
When you run ATP simulation- AC04, you generally run it for the plant as that is the supplying location and not the customer.
<i>In case of Sales Order creation in ECC how does system pick up the Check Mode and Business Event for the product (having Sold-to as customer and Supply Plant as the plant code) and use it in APO.</i>
PLease look above for this answer.
(4) Question 4 - <i>Any other setting/configuration that is missed causing this behaviour.</i>
To my best knowledge, whatever I could remember I have listed out. However there are some more steps which might be needed.
Follow all the steps as I have mentioned and whenever you get struck somewhere, shoot me a message and I will help you.
ONe more pointer here to what you have mentioned
Relevant setup in SPRO - Product Allocation Object, Group, Procedure, Sequence etc., Planning Object Structure, Planning Area, CVC generation, Connection between Planning Area and Product Allocation object in GATP, assignment in Location Product Master (at Customer Location) Product Allocation Procedure, Check mode, ATP Group has been done in APO.
After entering data in appropriate keyfigures (Allocated Qty) it shows up under GATP>> Reporting >> Product Allocations >> Time Series per CVC
<u><i>Have carried out ATP Simulation to check that for a given product at Customer the Product Allocation against a Required Quantity takes place correctly.</i></u>
Somnath, I believe you might have a wrong picture here. The concept of allocation is Controlling Supply against huge Demand which is in this case coming from SALES ORDER
When you place a sales order, the supplying location is your plant and that is where you would like to put in allocation quantities
Say for example for a material 12345 - You have stock of 100 Qty in Plant KING fo this week and it shows as follows in the planning book
Customers say are WALKART, GE-FUG, MACROGUN
The CVCs which we have to create are as follows
Similar to Demand PLanning**
Material 12345 -PLant KING-Cust WALKART-Prod Alloc Obj
Material 12345 -PLant KING-Cust GE-FUG-Prod Alloc Obj
Material 12345 -PLant KING-Cust MACROGUN-Prod Alloc Obj
And this is how it appears in the planing book when you go into DETAILS ALL
You basically enter the Allocation Quantities just as how you enter forecast quantities in DP Book*
Wk1 | WK2 WK3 WK4 WK5
Alloc Qty |
Material 12345 |
Plant KING |
Cust WALKART 50 |
Cust GE-FUG 30 |
Cust MACROGUN 20 |
Incoming Order Qty |
Material 12345 |
Plant KING |
Cust WALKART <u>50</u>|
Cust GE-FUG <u>25</u> |
Cust MACROGUN <u>20</u> |
<u>50</u> : Say the Cust WALKART has ordered 250 for this week, however only the allocated quantity -50 will be confirmed for him and the remaining 200 qty will be confirme at a later week when he is given the allocated amount.
<u>25</u> :Similarily say this customer GE-FUG has ordered 20 qty. So his remaining allocation is basically 5 which cannot be used by any other customer.
<u>20</u> : Say this customer MACROGUN has ordered exactly the allocated amount of 20. So his remaining allocation will be 0.
This is the basic idea of how Allocation Concept is used in GATP.
Ofcourse you can add the other functionalities like
Rules Based ATP(LOcation Substitution, Product Substitution)
Multi ATP( BOM-COmponents)
Check Aginst Forecast
Etc Etc
Like any other module of SAP- this module has much to offer which unfortunately I cannot list here**
GOOD LUCK and let me know If you need additional help.
Regards
KUMAR AYYAGARI
Message was edited by:
Kumar P Ayyagari -
Adding new field to product allocation catalog?
We are configuring product allocations in SCM 7.0 and have a requirement to add a new field to the standard field catalog for the allocations check. We have followed the procedure outlined by SAP to add our new field to the structure /SAPAPO/KOMGOZ, add the field to the field catalog, and copied the source code to ERP.
The issue that we are having is that new custom field that we added to the field catalog is not being populated when we execute /SAPAPO/ATPQ_PAREA_K - Characteristics Combinations from Planning Area. The product allocations group that is being used in /SAPAPO/ATPQ_PAREA_K has three characteristics. The first two which are SAP provided fields are being populated correctly, but the last custom field we added to the field catalog is not. It is just blank.
Is there a step that we missed during the configuation. We are only using this field for the product allocations check (we do not use Rules Based ATP).Hi Arnel,
I was expecting with examples but anyway.
consider the examples of your CVC
Country Region brand SO DV DC mat plant etc...
now you want to first get confirmation on SO and DV , Prd allo group with these 2 characteristics
same goes for all other combinations.
now if you want to go with Either Or /And.. decides if you need to go with one product allocation procedure with many prod allocation group /or/ a sequence product allocation procedure.
Its very straight forward as such... if you come up with examples, i can give better details.
Looking at point 3 it looks like you want to go with 'OR' so you will have to go with sequence.
(tcode: /SAPAPO/ATPCQ_GENER)- is to check the customizing, sometime you might move the Prod allocation from dev system and just to make sure there is no issue in transport /missing config.. it will check with transaction code. I don't think you have to run this every time. After every transport..may be you have too as a caution check.
Imp: just to check @ different levels i dont think you will have to create different planning area. If all the characteristics on which you want to (combinations) is available in one planning area , you should be good with one planning area only.
Hope this is helpful. I would suggest to follow what we have discussed so far and then you can create another message after the configuration/approach you finalized with new issues/concerns you will be facing.
If issue are really bothering you much, you can reach out to me directly. Let me know
Pravin M -
Hi Experts
I am new to APO GATP.We have implemented GATP Basic methods product availabilty check and allocation check in our project.
When i run OM17 for product allocations we are getting following inconsistencies:
000 Shortage of incoming orders quantity @5F\QNo long text exists@ ZCS_S999 32oyIy8a043X0000meaTaW 12.04.2010 18.04.2010 0 0 1,222 1,222
When i run correct inconsistencies , inconsistencies are not getting removed.following message is prompting:
Message Number: /SAPAPO/OM_SYNC082
Diagnosis
The incoming orders quantity in liveCache could not be adjusted using product allocation assignment. This can have a number of causes. Check the following causes and try again:
Procedure
Check:
If the planning area to be adjusted is locked
If the time series are initialized (after liveCache has been initialized)
If all characteristics combinations exist in the planning area
1)What is the problem and why i am getting this error message?
2) How to remove or resolve the above inconsistency?
Regards
VickyHi Senthil
Thanks for your reply.
When i run OM17 for product allocations we are getting following inconsistencies:
000 Shortage of incoming orders quantity @5F\QNo long text exists@ ZCS_S999 32oyIy8a043X0000meaTaW 12.04.2010 18.04.2010 0 0 1,222 1,222
1) Based on the planning object number(32oyIy8a043X0000meaTaW) from om17, i went to the transaction /SAPAPO/ATPQ_CHKCHAR - Characteristic Combinations and i dont find the characteristic value combination of the Planning Object Number.
2) I ran the transaction /SAPAPO/ATPQ_CHKUSG - Product Allocation Assignment Check based on the product allocation group and planning object number (32oyIy8a043X0000meaTaW ) with Assignment w/o order quantity i found it with red lght.
1) Check whether if the allocation group is used in several product allocation steps. (We are using only single product allocation step )
2) Check the product allocation procedure is maintained correctly( Yes its maintained correctly)
3) Check whether any lock created in planning area(How and where to check this )
4) Check whether the planning area is initialised(yes Planning area is intialized )
5) Run /SAPAPO/TSCONS and check for any errors(No errors)
6) Run /SAPAPO/ATPQ_CHKUSG and look for any errors
(I ran the transaction /SAPAPO/ATPQ_CHKUSG - Product Allocation Assignment Check based on the product allocation group and planning object number (32oyIy8a043X0000meaTaW ) with Assignment w/o order quantity i found planning object number with red colour.I dont understand what need to done in this transaction. I tried to delete but Delete option is greyed Out)
What would be the reason for this error?
How to resolve this inconsistency?
Regards
Vicky
Edited by: vicky999 on Jun 24, 2010 4:17 PM -
VMI order check against Product Allocation
Hi
We are setting up VMI where we are to plan the supply to one of our customers.
During our tests we have dicovered that the TLB orders are not checking against Product Allocation.
An ATP check does takes place when creating the TLB order (we are not using Deployment!!) but check against Product Allocation does not take place!!!
If we do an online ATP check from R/3 after
Does anybody knows how to enable check against Product Allocation during TLB order creation ?Unfortunately there is not a tool to make diagrams in here or do we have..
To depict ATP check against Product Allocations, we can have two big blocks representing R/3 and APO.
Then in each block we can have smaller blocks to represent
a sales order creation(in R3 block) and Product Allocations in Planning area (in SCM block).
You can depict ATP call by making an arrow from sales order block to product allocation block. Then to add further details you
can have a time series(bar graph) showing product allocations for time buckets( say months) getting offset by incoming orders in a separate diagram.
to represent BOP, a block for SD ( in R3 block) and a block for BOP (in APO) and a link between them to trigger BOP process. A line from BOP back to R3 block connecting a smaller blocks "process event" and then connecting to "update".
This update block should be linked to another smaller block in APO named as "update time series". then this update time series can lead to "delete temporary quantity assignments" block( in APO).
Hope this helps..
Mohan Chunchu -
Product Allocation S140 Info structure.
Hello Experts,
We have configured the setting related Availability check against Product Allocation.
Everything is fine except for S140 Infostructure. We are using Flexible Plan. The Info structure is getting updated whenever we create an order and the qty is confirmed. How do the other fields gets updated?( Product allocation qty & customer requirements are initial upload by the client. Order qty is getting updated whenever order is created. Other fields Def.division, Open product allocation qty and requirements not covered are not getting updated. formulas have been activated.
How and when the other fields will be updated? Aniticipating your answers.
Thanks In Advance.Yes
-
Check the Product Allocation Settings - /SAPAPO/ATPCQ_CHECK
Hello,
I have an issue when I use the Check the Product Allocation Settings (TCODE: /SAPAPO/ATPCQ_CHECK), the system returns ''SYST: Period 000 is not valid in financial year variant J1''. J1 is my calendar and I using this calendar for all another Product Allocation Groups whitout erros. I just have this information by system report.
I sincerely don't no why some groups have this issue because all groups are using the same setup.
Anybody have any ideia?
Thanks,
-RalphHi Santosh,
First thank you for help me, following your instructions I have made a investigation and now I know thatu2019s
another team doing a test with this calendar in R/3, for FI, and really have differences between systems. Your direction are correctly.
Thank you very much!
Ralph Veiga -
Product allocation error while creating a sales order
Hi Gurus,
My client is using the availability check against product allocation functionality in sales order.while I am creating the sales order and entering the material system is throwing the error message product allocation XXX is invalid,after pressing the enter button system has thrown another error "incorrect index structure for table XMVERF_POS/000010" and unable to save the order.
I have checked the material master and the product allocation is assigned in basic data 1 view,I have also checked the IMG settings it has maintained and assigned to infostructure.Please let me know is there any config settings are missing related to product allocation.
Regards,
hari challa.Please check if storage location is populated for the material. Also may be this material is a non-stock material and not relevant for storage location check.. If you have any non-stock items in your order and if you are populating the storage location in the order automatically, then this happens. Please check your code and bypass the check for non stock items.
Hope this helps
Regards
Sai -
Datasources getting deactivated after system restart
Hi,
We are facing a issue while system restart the datasources are getting deactivated.
Can anyone let me know where to check to debug this issue.
Thanks & Regards,
Ankur Deshpande
P.S: Points will be awardedHi Ankur,
We too are facing the same error.
Br,
Praby -
Product allocation check found changes to the confirmation
Hi friends,
while creating the sales order after entering the material, i am getting the Error -'product allocation check found changes to the confirmation'.i have checked in MMBE stock is there for the material and because of this the schedule line is not confirmed.
what could be the possible Answer ? please help me out.
regards
santoshHi
Double Click on the sub-item and goto schedule lines tab and them from menu select Environment and click on Availability.
See whats the available stcok.
Regards
Madhu -
We are getting the following error "Complete allocation structure GA"
Hi,
Please help on the below issue:-
We are carrying settlement of order (Period end activities ) for CO88 . We are getting the following error complete allocation structure GA.
Please guide us.
Regards
SrinivasHi,
Go to Allocation structure and maintain the Source and Settlement cost element for various cost groups in the structure.
And maintain this Allocation Structure in the settlement profile for your Production/Process orders.
Regards
Balaji
Maybe you are looking for
-
5.5k HD RED Dragon File Problem in Premiere Pro CC
Hi everyone! I am currently editing a project in premiere pro cc which is shot on the new RED Dragon Camera. Premiere is incredibly awesome in handling all the huge files and displaying them in the timeline. However I have found out, that some of our
-
Issue with OIOF entry - Assignment of Costing parameters to Maintenance Ord
Dear Friends, I need to assign some costing parameters to a Plant and Order type using OIOF [assignment of costing parameters to Maintenance orders]. But the plant and order type data in that table is missing [deleted by some means!] . Now I need to
-
Good Day, i have problems with registering my Podcast via Itunes. I have a wordpress blog, using podpress plugin (both newest versions) and i have validated the rss file with the validator. I also imported the podcast over 'eriwetert' > 'podcast abon
-
For two days now icloud can't load my email due to server error. Why is this?
-
Increase PTHREAD_THREADS_MAX.
We have an application that creates pthreads. The problem being when we hit the PTHREAD_THREADS_MAX. This is defined in limits.h. Is there anyway to bump this # up thru some system setting?. i.e Is it possible to increase the number of pthreads avail