Cvd ammount not capturing properly

hello
anyone can please tell the possible reasons.i am receiving a imported  material but when we  do miro for custom duty then
CVD amount got posted to CESS on CVD account rather than cvd account .
please help
regards
vijay

Dear Raghu,
In case of Import I m facing problem.My base is coming wrong.
I am not getting the Value which I had entered in MIRO.
ADC isn't flowing.
In Imoprt pricing I have takne JADC & in Excise default I have maintained the condition also.
Can u p. tell me ,How did u resolve the problem ??
Regards
Biswajit

Similar Messages

  • JCV1 CVD values not capturing in BED while doing J1IEX

    Hi,
    I have done all settings which is required for Import po. I have created import po & then i have done miro for custom clearance. But when i am capturing the excise invoice the CVD amount not flows in the BED.
    Please suggest.
    Regards,
    Anant Dalvi

    Hi,
      As you have define the material and chapter ID in J1ID also check whethere excise % is maintain or not for thta Chapter ID by selecting excise tax rate radio button in J1ID with proper validity period.
    CVD amount % = Excise rate column in J1ID
    ECESS              = ECESS column in J1ID
    SECESS           = AT1 column % in J1ID.
    because when you do MIRO conditions come in MIRO from PO delivery cost  and in J1IEX it comes from PO and J1ID combination.
    regards,
    zafar

  • ED not capturing properly while posting IR

    Hi
    I am facing problem when creating Invoice with ref to GR.
    In PO ED is capturing properly, in PartII also it is capturing ED properly,  But when I am trying to POST IR, if I go to simulate invoice it is showing wrong ED ie lesser than the actual amount to be captured. Please find solution. And I have checked G/L accs, acc keys, cond types.
    Regards
    venkat
    Edited by: garapati on Dec 21, 2007 10:19 AM

    Hi,
    Check whether all condition type in tax default (customization)are correct or not.
    Regards,
    Chetan.

  • CVD Values Not Capturing in MIGO after Customs MIRO

    Hi,
    I am getting problem in Import procedure.
    We created Import Purchase order as normal means Main Vendor in Foreign Currency and Customs Vendor in Indian Currency.We assigned same in PO.
    After creating PO we did Customs MIRO in Indian Currency.
    But at the time of Goods reciept System not defaulting BED(CVD) and E cess(e cess on CVd) and SHE(SHE on CVD)
    but ADC is their.
    In MIGO we entered Customs invoice Number.we are mentioned Excise default settings.We are using TAXINN.
    ECC 6.SAP_APPL 11.
    In my Import Pricing Procedure we are assigned Account key and accurals.
    Please any body know the SNOTE number reply me.
    Thankyou,
    Raghu

    Dear Raghu,
    In case of Import I m facing problem.My base is coming wrong.
    I am not getting the Value which I had entered in MIRO.
    ADC isn't flowing.
    In Imoprt pricing I have takne JADC & in Excise default I have maintained the condition also.
    Can u p. tell me ,How did u resolve the problem ??
    Regards
    Biswajit

  • My camcorder videos are not capturing properly

    The same thing is happening to all the video that I capture from my video camera: Once or twice every second, there is a "pop" in the audio, and then the audio skips ahead by a fraction of a second.  Sometimes the video skips ahead too, but not as frequently.  I've made several capture attempts, and sometimes the audio and video get out of sync and sometimes not.  But it always does that popping and skipping ahead thing.
    The first time this happened, I got an error dialog that said something about the sample rate, but then I never got that message again, so I really can't say exactly what it said.
    I used to capture video from this camera all the time with no problem, a couple years ago.  But now, no dice.  I've tried it on both of my computers and the same thing happens.  I've also tried iMovie -- again, same deal.
    My first thought was that maybe I had changed the audio sample rate setting on my video camera, but I've searched the manual and it looks like my only options are 12bit and 16bit.  I tried both and got the same result.
    I'd sure appreciate any help you can provide, cause I'm completely stuck until I figure this out.  Thank you!

    At first I thought you might be a newcomer doing something terribly wrong but it appears you have successfully used FCP and that camera on previous occasions.
    Does the camera still playback correctly?
    What version of FCP have you got and have you updated your OS recently as there may be an incompatibility?
    As this is an apparent mystery the first thing you could try is to trash your preferences exactly as described here:-
    http://www.fcpbook.com/Misc1.html

  • Trace tool : st12 - not capturing properly

    HI guys,
    I am using st12 transaction for tracing my progarm module wise time consumption.
    my program takes 3000 seconds. for completing the job.
    i would like to know where it takes more time.... i used the tcode st12.
    i am not getting correct result.....from st12.....
    i suspect something wrong with this tool...how can i set it right......
    regards
    girish

    Hi Yuri,
    > > It's not recommended to use the USER scenario anymmore.
    > > Instead use the task & http scenario explained here:
    >
    > by the way, why? I am not aware of this.
    > Used "USER" scenario yesterday in the previous release (01M). Had a problem that the first recorded and collected trace was ofc. from the ST12 itself, but when I went to "collect ext. traces" I was able to find the second ABAP trace from the mode where I was executing my real transaction. As far as I know from Bernd, technically these two options work in the same way.
    Well, simply because it is not as transparent (manual collection and so on). Because it is the user scenario is the same but not as transparent as the task & http (and has additional efforts with manual collection) i think it will disappear (or better put together or replaced with task & http) in the next version (as far as i know). Im my opinion the user mode is kind of obsolete because it is only a subset of the task & http secario without any additional advantage.
    Kind regards,
    Hermann
    Edited by: Hermann Gahm on Jun 16, 2011 10:49 AM

  • CVD not capturing in GRN(101 mvt type) with reference to STO

    Hi Experts,
    This regarding the CVD not capturing at the time of 101 movement against STO.
    My scenerio is as follows.
    I am importing some materials. Import PO will be based on a pricing schema where no CVD or customs duties are maintained. Against that Import PO GRN (101mvt type) will takes place at Port plant(Maintained Port as a plant). Now STO will be done from the manufacturing plant setting port plant as the supplying plant.This STO also based on the pricing schema where the Customs duties as well as the CVD s are maintained. Miro for the BCD & CVD will be done based on this STO and then MB1B with 351 mvt type will be done .Then by analysing financial documents having the CVD and BCD entries will be generated at the time 351 mvt type. Then GRN (101)at the Manufacturing plant against STO will be done. But in the Excise duty field the CVD values are not capturing.
    Why CVD values are not capturing? Is it a std SAP functionality? If so please explain the logic.
    If not please guide me why it is not capturing.
    If Only at the time of 351 these excise invoice will be generated. How can I track the Invoice because during mb1b I am not supposed to put any vendor excise invoice number.
    Please analyse this scenerio and guide me with your experience in this Ocean.
    It will be helpful for me to tackle this issue raised by a client if you put some significant threads on this.
    Thanks & Regards
    Prabhul

    Dear
    It is not possible in standard SAP. use the MB_DOCUMENT_BADI.
    To get the order components use the COXT_BAPI_GET_DETAIL.
    Now while doing goods issue using transaction code MB1A and MIGO system has to do the check:
    If Quantity of issue in goods issue screen + Quantity withdrawn <= Requirement quantity then allow the transaction else throw an error u201CGoods Issue not possible for Requirement quantityu201D

  • OHS - Protocol (Periodic) Next due dates are not being captured properly

    Protocol (Periodic) Next due dates are not being captured properly in the Planning Cockpit (EHSH_D_PCP) report nor the Protocol report (S_SH8_7200013).  The Planned date is not resetting itself for the medical service sometimes.
    Any idea what might be causing this issue?
    Regards
    Naveen

    HI Naveen
    Have you overridden the std BADI for calculating Next due date?
    Thanks
    Jagdsh

  • HT200166 I have a Canon XL2 that will not capture video properly in fcp 10, where it does capture properly in fcp6 and 7. How can I "fix" fcp 10 to do this correctly?

    My Canon XL2 (1394/firewire 400) will not capture correctly in fcp10, but it did when I had fcp 7 on the same computer. Is there a software fix that will allow me to use the XL2 with this program?

    I just want to get this clear.
    With FCP 7 and earlier you could capture a whole tape in one continuous 60 minute long clip.
    FCP X cannot do that. It is designed to split the tape into its individual clips, however long they may be.
    Are you saying that when you try to capture clips of 10 seconds or so, it only captures the first 4 seconds?
    All I can suggest is that you trash the preferences with this free app.
    Many weird things happen as a result of corrupt preferences which can create a vast range of different symptoms, so whenever FCP X stops working properly in any way, trashing the preferences should be the first thing you do using this free app.
    http://www.digitalrebellion.com/prefman/
    Shut down FCP X, open PreferenceManager and in the window that appears:-
    1. Ensure that only  FCP X  is selected.
    2. Click Trash
    The job is done instantly and you can re-open FCP X.
    There is absolutely no danger in trashing preferences and you can do it as often as you like.
    The preferences are kept separately from FCP X and if there aren't any when FCP X opens it automatically creates new ones  .  .  .  instantly.

  • CVD not capturing in GRN

    Dear All,
    i  just configured import pricing, but while doing migo against Commercial Inv. there is  in excise tab all cenvatable values coming correctly but only cvd is not coming, i also maintained jcv1 cond, in excise default,
    pls help
    Vipin

    I have already posted the question in the forum.
    I thought to check with you on this and take help. I have the following doubt, please clarify:
    CVD Account is given in following customizing:
    spro>Logistics General>India>Basic Settings>Maintain Company Code Settings.
    Is this a clearing account?
    How this account is knocked off?
    I was told that what account we give for offset account in spro>Logistics General>India>Account Determination>Specify G/L Accounts per Excise Transaction, we have to give same account in the above settings. Is it correct?

  • Help, web cam is not working properly with win vista

    Hii.. my web cam is not working properly with win vista..even if the icon appears bt it does nt start.. its
    lenovo easy capture 2.5...so if u cud suggest me anything...
    Moderator note; subject edited

    re-install drivers and try again. ( also easy capture )

  • My HP-Pavilion dv6 web cam is not working properly, fluctuating always

    My HP-Pavilion dv6 web cam is not working properly, it is fluctuating always

    re-install drivers and try again. ( also easy capture )

  • Excise is not captured in MIRO in Dealer Invoice

    In dealer invoice , In PO, for Eg: Basic price : 1000 + vat 200, Total 1200 Rs.
    I have changed excise duty values in MIGO . for Eg: Basic price : 900 + Excise 100, Total 1000 Rs.MRP Indicator activated
    Excise is not captured in MIRO.
    Regards.,
    Lakshmanan.S

    In case of dealer invoice you will have to change the Tax code in MIRO in your case to get the Excise calculated.
    Other way is you take excise credit first with J1IEX clicking MRP indicator and properly takin excise credit, after that MIRO will automatically take excise in to accounts.

  • BED is not capturing in the J1IIN

    Dear Experts,
    I have created commercial invoice ,in which i have entered only BED (Condition type JMAN)  manually (Rest of the duties like Cess and Ecess will appear automatically)then i created excise invoice with the help of J1IIN, while creating excise invoice manually entered BED is not capturing and not generating accounting entry also for BED but the other duties (Cess Ecess) is capturing properly in the  excise invoice and entries also generating.
    i have check the other commercial document also, wherever we entered BED manually the same problem we are facing and if BED is coming automatically, where we are not facing the problem.
    So please help me to resolve the issue urgently
    Shibu

    Sir,
    ,i have gone through the path as you suggested, where JMAN is not maintained. the thing is that we are not able to maintain JMAN in Tax Defualt information because we are entering occasionally (JMAN ) manual excise duty. mostly the excise duty is coming from preceding document. if i change the JEXP and maintain JMAN in Tax Defualt Information, i hope i will face problem if BED is coming from preceding document automatically, in that case i have to change again the JEXP instead of JMAN.
    Please give me help for resolving the isse
    Shibu Chandran

  • Not working properly Computer Browser service in Windows Server 2012

    Good afternoon.
    Migrated from 2003 to 2012 Active Directory, all is good, but the service Computer Browser in Windows Server 2012 is not working properly.
    Online, there are several hundred computers, one network, no segments. PDC is the Master Browser, it is in my list of all the computers, but gives customers or Backup Browser computers only part, and in alphabetical order, giving the first 70 computers and
    all.
    Looked packet sniffer:
    Microsoft Windows Lanman Remote API Protocol 
    Entry Count: 70 
    Available Entries: 251
    So on Master Browser shows 251 computer, and the client 70.
    If disabled on Windows Server 2012 Service Computer Browser, Master Browser is a computer running Windows Server 2003. He gives all computers.
    What is the problem, how to get Windows Server 2012 to work correctly as a Master Browser?

    More info. I have high lighted in bold where the issue is. This is a massive headache for me at the moment
      Frame: Number = 377, Captured Frame Length = 182, MediaType = ETHERNET
    - Ethernet: Etype = Internet IP (IPv4),DestinationAddress:[00-13-72-52-6E-A1],SourceAddress:[00-1E-0B-2B-68-DD]
      - DestinationAddress: Dell Inc. 526EA1 [00-13-72-52-6E-A1]
         Rsv: (000000..)
         UL:  (......0.) Universally Administered Address
         IG:  (.......0) Individual address (unicast)
      - SourceAddress: 001E0B 2B68DD [00-1E-0B-2B-68-DD]
         Rsv: (000000..)
         UL:  (......0.) Universally Administered Address
         IG:  (.......0) Individual address (unicast)
        EthernetType: Internet IP (IPv4), 2048(0x800)
    - Ipv4: Src = 10.44.46.101, Dest = 10.44.44.14, Next Protocol = TCP, Packet ID = 14025, Total IP Length = 168
      - Versions: IPv4, Internet Protocol; Header Length = 20
         Version:      (0100....) IPv4, Internet Protocol
         HeaderLength: (....0101) 20 bytes (0x5)
      - DifferentiatedServicesField: DSCP: 0, ECN: 0
         DSCP: (000000..) Differentiated services codepoint 0
         ECT:  (......0.) ECN-Capable Transport not set
         CE:   (.......0) ECN-CE not set
        TotalLength: 168 (0xA8)
        Identification: 14025 (0x36C9)
      - FragmentFlags: 16384 (0x4000)
         Reserved: (0...............)
         DF:       (.1..............) Do not fragment
         MF:       (..0.............) This is the last fragment
         Offset:   (...0000000000000) 0
        TimeToLive: 128 (0x80)
        NextProtocol: TCP, 6(0x6)
        Checksum: 0 (0x0)
        SourceAddress: 10.44.46.101
        DestinationAddress: 10.44.44.14
    - Tcp: Flags=...AP..., SrcPort=65372, DstPort=NETBIOS Session Service(139), PayloadLen=128, Seq=1910965363 - 1910965491, Ack=580319796, Win=252 (scale factor 0x8) = 64512
        SrcPort: 65372
        DstPort: NETBIOS Session Service(139)
        SequenceNumber: 1910965363 (0x71E70473)
        AcknowledgementNumber: 580319796 (0x2296FA34)
      - DataOffset: 80 (0x50)
         DataOffset: (0101....) 20 bytes
         Reserved:   (....000.)
         NS:         (.......0) Nonce Sum not significant
      - Flags: ...AP...
         CWR:    (0.......) CWR not significant
         ECE:    (.0......) ECN-Echo not significant
         Urgent: (..0.....) Not Urgent Data
         Ack:    (...1....) Acknowledgement field significant
         Push:   (....1...) Push Function
         Reset:  (.....0..) No Reset
         Syn:    (......0.) Not Synchronize sequence numbers
         Fin:    (.......0) Not End of data
        Window: 252 (scale factor 0x8) = 64512
        Checksum: 0x6F65, Disregarded
        UrgentPointer: 0 (0x0)
        TCPPayload: SourcePort = 65372, DestinationPort = 139
    - Nbtss: SESSION MESSAGE, Length =124
        PacketType: SESSION MESSAGE, 0(0x00)
      - Flags: Add 0 to Length
         Reserved: (0000000.)
         Extension: (.......0)Add 0 to Length
        Length: 124(0x7C)
    - SMB: C; Transaction, Remote Administration Protocol, FileName = \PIPE\LANMAN
        Protocol: SMB
        Command: Transaction 37(0x25)
      - NTStatus: 0x0, Facility = FACILITY_SYSTEM, Severity = STATUS_SEVERITY_SUCCESS, Code = (0) STATUS_SUCCESS
         Code:     (................0000000000000000) (0) STATUS_SUCCESS
         Facility: (...0000000000000................) FACILITY_SYSTEM
         Customer: (..0.............................) NOT Customer Defined
         Severity: (00..............................) STATUS_SEVERITY_SUCCESS
      - SMBHeader: Command, TID: 0x2001, PID: 0x276C, UID: 0x3801, MID: 0x0140
       - Flags: 24 (0x18)
          LockAndRead:     (.......0) LOCK_AND_READ and WRITE_AND_UNLOCK NOT supported (Obsolete) (SMB_FLAGS_LOCK_AND_READ_OK)
          NoAck:           (......0.) An ACK response is needed (SMB_FLAGS_SEND_NO_ACK[only applicable when SMB transport is NetBIOS over IPX])
          Reserved_bit2:   (.....0..) Reserved (Must Be Zero)
          CaseInsensitive: (....1...) SMB paths are case-insensitive (SMB_FLAGS_CASE_INSENSITIVE)
          Canonicalized:   (...1....) Canonicalized File and pathnames (Obsolete) (SMB_FLAGS_CANONICALIZED_PATHS)
          Oplock:          (..0.....) Oplocks NOT supported for OPEN, CREATE & CREATE_NEW (Obsolete) (SMB_FLAGS_OPLOCK)
          OplockNotify:    (.0......) Notifications NOT supported for OPEN, CREATE & CREATE_NEW (Obsolete) (SMB_FLAGS_OPLOCK_NOTIFY_ANY)
          FromServer:      (0.......) Command - SMB is being sent from the client (SMB_FLAGS_SERVER_TO_REDIR)
       - Flags2: 51207 (0xC807)
          KnowsLongFiles:            (...............1) Understands Long File Names (SMB_FLAGS2_KNOWS_LONG_NAMES)
          KnowsEas:                  (..............1.) Understands extended attributes (SMB_FLAGS2_KNOWS_EAS)
          SmbSecuritySignature:      (.............1..) Security signatures enabled (SMB_FLAGS2_SMB_SECURITY_SIGNATURE)
          Compressed:                (............0...) Compression Disabled for REQ_NT_WRITE_ANDX and RESP_READ_ANDX (SMB_FLAGS2_COMPRESSED)
          SecuritySignatureRequired: (...........0....) Security Signatures are NOT required (SMB_FLAGS2_SMB_SECURITY_SIGNATURE_REQUIRED)
          Reserved_bit5:             (..........0.....) Reserved (Must Be Zero)
          IsLongName:                (.........0......) DO NOT use Long File Names (SMB_FLAGS2_IS_LONG_NAME)
          Reserved_bits7_9:          (......000.......) Reserved (Must Be Zero)
          ReparsePath:               (.....0..........) NOT a Reparse path (SMB_FLAGS2_REPARSE_PATH)
          ExtendedSecurity:          (....1...........) Aware of extended security (SMB_FLAGS2_EXTENDED_SECURITY)
          Dfs:                       (...0............) NO DFS namespace (SMB_FLAGS2_DFS)
          Paging:                    (..0.............) Read operation will NOT be permitted unless user has permission (NO Paging IO) (SMB_FLAGS2_PAGING_IO)
          NTStatus:                  (.1..............) Using 32-bit NT status error codes (SMB_FLAGS2_NT_STATUS)
          Unicode:                   (1...............) Using UNICODE strings (SMB_FLAGS2_UNICODE)
         PIDHigh: 0 (0x0)
         SecuritySignature: 0x0
         Unused: 0 (0x0)
         TreeID: 8193 (0x2001)
         ProcessID: 10092 (0x276C)
         UserID: 14337 (0x3801)
         MultiplexID: 320 (0x140)
      - CTransaction:
         WordCount: 14 (0xE)
         TotalParameterCount: 32 (0x20)
         TotalDataCount: 0 (0x0)
         MaxParameterCount: 8 (0x8)
         MaxDataCount: 4200 (0x1068)
         MaxSetupCount: 0 (0x0)
         Reserved: 0 (0x0)
       - Flags: Do NOT disconnect TID
          Disconnect: (...............0) Do NOT disconnect TID
          NoResponse: (..............0.) Server response to the client
          Reserved:   (00000000000000..) Reserved
         Timeout: 5000 milli sec(s)
         Reserved2: 0 (0x0)
         ParameterCount: 32 (0x20)
         ParameterOffset: 92 (0x5C)
         DataCount: 0 (0x0)
         DataOffset: 0 (0x0)
         SetupCount: 0 (0x0)
         Reserved3: 0 (0x0)
         ByteCount: 61 (0x3D)
       - RemoteAPIBuffer:
        - FileName: \PIPE\LANMAN
         - Align: 1 Bytes
            AlignBytes: Binary Large Object (1 Bytes)
           Name: \PIPE\LANMAN
          Pad1: Binary Large Object (2 Bytes)
    - RAPRequest: NetServerEnum2 Request, InfoLevel = 1, SV_TYPE_ALL: All in NSNET
        RAPOpcode: NetServerEnum2
      - ParameterDescriptor: WrLehDz; 4 send, 1 receive parameter
         Param: (W) WORD (send parameter, 16 bit integer)
         Param: (r) Receive buffer (format in data descriptor) (receive data, 0 bit integer)
         Param: (L) Receive buffer length (send/receive parameter, 16/16 bit integer)
         Param: (e) Entries read (receive data, 0 bit integer)
         Param: (h) WORD (receive parameter, 16 bit integer)
         Param: (D) DWORD (send parameter, 32 bit integer)
         Param: (z) ASCIIZ (send parameter, 8 bit integer)
         Param: ASCII NUL (string terminator)
      - DataDescriptor: B16BBDz; data bytes send: 0, receive: 34
       - Datum: (B) BYTE[16] (receive data, 8 bit integer)
          Datum: (B) BYTE (receive data, 8 bit integer)
          Digit: 1
          Digit: 6
         Datum: (B) BYTE (receive data, 8 bit integer)
         Datum: (B) BYTE (receive data, 8 bit integer)
         Datum: (D) DWORD (receive data, 32 bit integer)
         Datum: (z) ASCIIZ* (receive data offset, 32 bit integer)
         Datum: ASCII NUL (string terminator)
      - NetServerEnum2: SV_TYPE_ALL: All in NSNET
         InfoLevel: (1) SERVER_INFO_1
         ReceiveBufferSize: 4200 (0x1068)
       - ServerType: SV_TYPE_ALL: All
          Workstation:      (...............................1) All workstations
          Server:           (..............................1.) All computers with the server service running
          Sqlserver:        (.............................1..) All running Microsoft SQL Server
          DomainCtrl:       (............................1...) All primary domain controllers
          DomainBakctrl:    (...........................1....) All backup domain controllers
          TimeSource:       (..........................1.....) All Time servers
          AFP:              (.........................1......) All Apple File Protocol servers
          Novell:           (........................1.......) All Novell servers
          DomainMember:     (.......................1........) All LAN Manager 2.x domain members
          PrintqServer:     (......................1.........) All print servers
          DialinServer:     (.....................1..........) All dial-in servers
          ServerUnix:       (....................1...........) All Unix/Xenix servers
          NT:               (...................1............) All Windows NT workstations or servers
          WFW:              (..................1.............) All Windows for Workgroups servers
          ServerMFPN:       (.................1..............) All Microsoft File and Print for NetWare servers
          ServerNT:         (................1...............) All non-domain controller servers
          PotentialBrowser: (...............1................) All servers that can run the browser service
          BackupBrowser:    (..............1.................) All backup browsers
          MasterBrowser:    (.............1..................) All master browsers
          DomainMaster:     (............1...................)  All domain master browsers
          Reserved1:        (..........11....................)
          Windows:          (.........1......................) All Windows 95 or later
          DFS:              (........1.......................) All DFS root servers
          ClusterNT:        (.......1........................) All NT Clusters
          Terminalserver:   (......1.........................) All Terminal Servers
          ClusterVSNT:      (.....1..........................) All NT Cluster Virtual Server Names
          DCE:              (....1...........................) AllIBM DSS (Directory & Security Services)
          Reserved2:        (...1............................)
          AlternateXport:   (..1.............................) Return list for alternate transport
          LocalListOnly:    (.1..............................) Return local list only
          DomainEnum:       (1...............................) Enumerate primary domain
         Domain: NSNET
    Then the reply;
        Frame: Number = 378, Captured Frame Length = 1514, MediaType = ETHERNET
    + Ethernet: Etype = Internet IP (IPv4),DestinationAddress:[00-1E-0B-2B-68-DD],SourceAddress:[00-13-72-52-6E-A1]
    + Ipv4: Src = 10.44.44.14, Dest = 10.44.46.101, Next Protocol = TCP, Packet ID = 27036, Total IP Length = 1500
    + Tcp: Flags=...A...., SrcPort=NETBIOS Session Service(139), DstPort=65372, PayloadLen=1460, Seq=580319796 - 580321256, Ack=1910965491, Win=253 (scale factor 0x8) = 64768
    + Nbtss: SESSION MESSAGE, Length =2013
    + SMB: R; Transaction, Remote Administration Protocol
    - RAPResponse: NetServerEnum2 Response, Count = 31
        Win32ErrorCode: 0x00000000 - ERROR_SUCCESS - The operation completed successfully.
        Converter: 2251 (0x8CB)
      - NetServerEnum2: Count = 31
         EntriesReturned: 31 (0x1F)
         EntriesAvailable: 31 (0x1F)
       + NetServerInfo1: APOLLO
       + NetServerInfo1: ARTEMIS
       + NetServerInfo1: ASKLEPIOS
       + NetServerInfo1: CASTOR
       + NetServerInfo1: DCC4503-131L
       + NetServerInfo1: DCC4503-155L
       + NetServerInfo1: DCC4503-157L
       + NetServerInfo1: DCC4503-161L
       + NetServerInfo1: DCC4503-171L
       + NetServerInfo1: DCC4503-172L
       + NetServerInfo1: DCC4503-175L
       + NetServerInfo1: DCC4503-177L
       + NetServerInfo1: DCC4503-183L
       + NetServerInfo1: DCC4503-184L
       + NetServerInfo1: DCC4503-185L
       + NetServerInfo1: DCC4503-188L
       + NetServerInfo1: DCC4503-196L
       + NetServerInfo1: DCC4503-197L
       + NetServerInfo1: DCC4503-199L
       + NetServerInfo1: DCC4503-202L
       + NetServerInfo1: DCC4503-203L
       + NetServerInfo1: DCC4503-205L
       + NetServerInfo1: DCC4503-210L
       + NetServerInfo1: DCC4503-213L
       + NetServerInfo1: DCC4503-219L
       + NetServerInfo1: DCC4503-220L
       + NetServerInfo1: DCC4503-228L
       + NetServerInfo1: DCC4503-233L
       + NetServerInfo1: DCC4503-234L
       + NetServerInfo1: DCC4503-236L
       + NetServerInfo1: DCC4503-241L
        StringData: Binary Large Object (586 Bytes)

Maybe you are looking for