CVD and ADC accounts are not getting credited during the Goods Receipt of Imports PO (India)

Hello team,
We are receiving the goods against with the Imports PO. Before the GR, we have paid the Customs duties to the Indian government. And, in the Invoice of Customs (MIRO), the CVD and ADC G/L Accounts got debited with the respective Accrual Accounts which are maintained in the Pricing of Imports at the CVD and ADC conditions. But, as per the standard procedure, during the GR, the same gets credited. But, it's not happening.
Can anybody suggest what is the bug here that we need to correct?
Thanks in advance for your response.
Regards,
Satya

Have you used subtransaction type IP in MIGO.
Refer below notes.
929681
- Subtransaction type not picked up for ADC in MIGO C&P EI
910681
- Legal changes on Additional Duty of Custom
and
964190
- ADC on domestic purchase of imported goods
Regards
Binoy

Similar Messages

  • Batch Classification data not getting updated during the GR of the PO

    Dear Gurus,
    While doing the GR of the Purchase order the classification data for the batch should get updated .However we can see those data in MSC2N (Change batch) but not in MSC3N (Display Batch) .While consultuing with SAP we found that the data in MSC3N is directly picked in the AUSP table but the data in MSC2 N  reads the information directly from the
    reference table field (MCH1-LWEDT & MCH1-LIFNR .My Qusetion is why this the AUSP entries are not getting updated during the GR itself.
    Sumit Mohan

    Hi Sumit,
    I am not sure about your question, but if you want to populate the classification data during goods receipt then you need to maintain characteristics values in material master for classification tab under class type batch i.e. 022. After then it will apper during goods receipt for characteristics value for batch.
    Regards,
    Bhagat

  • Material Number and Serial Number are not getting filled...Very very urgent

    I have my code in the badi...CRM_EQUI_LOAD...method PERFORM_LOAD.In this i try to to create a component for the ibase using the function module... CRM_ICSS_CREATE_COMPONENT...The component gets created but the material and serial number are not getting updated...It is very very urgent..please help....

    I am not sure what information you are passing in given FM.
    But in my case I have used FM 'CRM_CREATE_IBASE_FROM_EQUI' to create Ibase and component. It creates IBase and Component along with other details like material number and serial number.
    you may refer the below code for the same >
    Call the standard handling for crm equi load.
      call function 'CRM_CREATE_IBASE_FROM_EQUI'
        exporting
          is_header         = is_header
          it_equi_dmbdoc    = it_equi_dmbdoc
        changing
          et_error_segments = ct_error_segment
        exceptions
          technical_error   = 1
          others            = 2.
      if sy-subrc <> 0.
        raise equi_load_badi_error.
      endif.
    Cheers,
    Ashish

  • Reg:tasks are not getting displayed in the uwl mss for particular user

    hi all
    Tasks are not getting updated in the MSS under tasks tab for particular user in EP.can any one please share their exp and knowledge on this how to reslove it.
    Thanks in advance.
    Deepika

    Hi Sateesh,
    This message will appear if either the background jobs are not scheduled, or UWL cannot tell that the background jobs are scheduled. The message no longer appears once you ensure the background jobs are scheduled to run via the user id UWL_SERVICE and that user is mapped to my portal user ID UWL_SERVICE.
    Kai

  • UWL : New tasks are not getting populated in the UWL

    Hi Experts,
        I<b> configured my uwl to my backend system , the completed tasks are getting populated in the UWL but the New tasks and in progress tasks are not getting populated in the UWL.(some thing strange).</b>
    When  i am trying to configure the universal  worklist system ,its givin me a caution message as  <b>System SHDCLNT012 does not support optimized delta pull</b> . where SHDCLNT012 is the system alias name.
    Is this the problem for not populating the new tasks in the UWL?
    Please provide me  the solution..
    Thanks & Regards,
    Sateesh

    Hi Sateesh,
    This message will appear if either the background jobs are not scheduled, or UWL cannot tell that the background jobs are scheduled. The message no longer appears once you ensure the background jobs are scheduled to run via the user id UWL_SERVICE and that user is mapped to my portal user ID UWL_SERVICE.
    Kai

  • Schedule lines are not getting generated during MRP Run

    Schedule lines are not getting generated during MRP Run. I have maiantained source list for the material with proper validity date and also maintained scheduling agreement . MRP relevvant Indicator , I have marked - 2 which means -Record relevant to MRP. Sched. lines generated automatically.
    Still I am not able to get schedule lines and instead of that *Purchase Requisitions* are getting generated.
    Can any one help me and suggest me what to be done in this case .
    Thanks & Regards ,
    Nirmalya

    Dear,
    Welcome to SDN,
    In transaction OMDT you have to enable the indicator create schedule lines
    In MD02 MRP control Prameter here select the Delivery schedules -3- Schedule line. Processing Key as NETCH and Planning Mode - 3 delted and recreated.
    Maintain source list ME01, in that put MRP indicator as '2' i.e. schedule lines via MRP.Put your agreement no in that.
    If u run MRP properly u will get schedule lines automatically in ME38.
    Make the schedule agreement, make it source relevent in the source list make is FIX and MRP indicator as 3.
    Regards,
    R.Brahmankar

  • OLE images are not getting transfered to the pdf format

    After executing the oracle report file 6i and while sending the report file directly from the report screen to the microsoft outlook mail by clicking the mail option from the report, the OLE Images are NOT getting converted to the mail attachment. Rest of the data is getting converted fine.

    hope this is not the correct forum to place this question.
    if not, mention DB and OS versions and state your problem more clearly
    mark answered post as helpful / correct*

  • Partner details are not getting captured to the purchase order from the ven

    Hi,
    Issue : ( ECC PO)
    Partner details are not getting captured to the purchase order from the vendor master.
    We found that the partners are not getting captured in ECC PO's automatically from the vendor master. We checked for all the config and everything seems to be o.k, but could not figure it out.
    Any suggestions are highly appreciated.
    Regards
    Sudhakar

    Hey Sudhakar,
    I believe what is happening here is that the ECC PO document type has not been assigned to the partner determination procedure.
    If this is working properly for standard POs, then,
    Go to Partner detrmination under Purchasing>  Partner Settings in Purchasing Documents> Assign Partner Schemas to Document Types.
    and enter teh appropriate document type and refer it to the procedure you have for NB Pos

  • Whenever a record is Edited the rows are not getting displayed in the repor

    Hi all,
    When a new record is added or edited, It is physically getting added or edited according to the process, but those records are not getting displayed in the report..
    Please Any body faced this situation...
    Help me to identify what error i am doing........
    thanks in advance
    kavitha L

    Hi KChamarti,
    I am also trying to display images insid the datagrid but i get a weird broken image(all silver gray).
    My item renderer is:
              <mx:DataGridColumn headerText="Type">
                   <mx:itemRenderer>
                     <mx:Component>
                      <mx:HBox verticalGap="2">
                          <mx:Image id="dgImage" source="\assets\images\{toLowerCase(data.type)}.jpg" />
                          <mx:Label text="{data.type}"/>
                        </mx:HBox>
                     </mx:Component>
                   </mx:itemRenderer>
                </mx:DataGridColumn>
    Am i mentioning the source of the image in the right way?

  • HT5287 If DVD Movies, Audio CD's and even burning CD and DVD's are not supported, what is the point of DVD & CD Sharing then? Wouldn't it just be better to remote in or use a thumb drive if it's only able to be used for data transfer?

    If DVD Movies, Audio CD's and even burning CD and DVD's are not supported, what is the point of DVD & CD Sharing then? Wouldn't it just be better to remote in or use a thumb drive if it's only able to be used for data transfer?
    Or am I missing the bigger picture?

    As long as you have a Superdrive or an external burner/drive, burning, watching, installing, etc. from CD or DVD will work just fine. And so will sharing.

  • Hyper-v cannot be installed: A hypervisor is already running: VMware Workstation and Hyper-v are not compatible. Remove the Hyper-V role from the system before running Vmware Workstation

    When I try to go to Control Panel\Programs and click on turn windows features on/off and , it shows ticks on hyper-v is removed.
    Hyper-v platform Is grayed out and When i move the mouse point to  Hyper-v platform it shows a message.
    "Hyper-v cannot be installed: A  hypervisor is already running"
    When I try to install vmware it says..
    VMware Workstation and Hyper-v are not compatible. Remove the Hyper-V role from the system before running Vmware Workstation..

    I dont feel you can do this. I have also tried what you tried and ended up with a failure.. So had to stick with vmware in one instance and for other instance hyper v... 
    For further details raise your question here http://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=winserverhyperv
    and
    https://communities.vmware.com/community/vmtn/developer/forums
    Good luck.. 

  • [svn:fx-trunk] 11546: fix so the textLayout. swc does not get modified during the build process.

    Revision: 11546
    Author:   [email protected]
    Date:     2009-11-06 15:42:05 -0800 (Fri, 06 Nov 2009)
    Log Message:
    fix so the textLayout.swc does not get modified during the build process.
    QE notes: no
    Doc notes: no
    Bugs: no
    Reviewer:
    Tests run: checkintests
    Is noteworthy for integration: no
    Modified Paths:
        flex/sdk/trunk/build.xml

  • My email gets bounced into an eternal loop in the outbox and says that my iCloud and me account are not recognized by the server? I've tried setting up another account and it says that I already have them set up, and it is stil only sending 1 or 2 message

    My messages get lost in an eternal loop in my out box and it says that my iCloud me accounts are not recognized by the server. I can send 1 or 2 out of 10.
    We tried adding a new account and that didn't work. We then deleted the account and started again. Still didn't work. Extremely frustrated!

    There also seems to be something wrong with the time!!! My posting says 5:30ish but it was 8:30ish?

  • Date and time fields are not getting updated in database

    Hi,
    I am Using the bapi SD_SHIPMENT_HEADER_CHANGE in my program ...
    I  am using bapi_shipemnt_create for creating shipment document but, trying to enter the date fileds using this bapi .
    can anybody please tell me how shud i pass this variables exactly ...
    i tried giving test data and checked this bapi .. the result in changing parameters is also appearing but in databade itself the date fields are not getting reflected ...
    The fields ate DTDIS ,UZDIS, DATEN,UATEN. ( i am trying to map these fields in changing parameters)
              gw_vttkvb_new-mandt = sy-mandt.
              gw_vttkvb_new-tknum = gw_return-message_v1(passing shipment number )
              gw_vttkvb_new-dtdis = gi_ship_doc-dtdis.
              gw_vttkvb_new-daten = gi_ship_doc-daten.
              gw_vttkvb_new-uzdis = gi_ship_doc-uzdis.
              gw_vttkvb_new-uaten = gi_ship_doc-uaten.
              APPEND gw_vttkvb_new TO gi_vttkvb_new.
              CALL FUNCTION 'SD_SHIPMENT_HEADER_CHANGE'
              EXPORTING
                i_tvtk                             =  '
              I_DESTINATION                      =
              I_DEPARTURE                        =
              OPT_DIALOG                         = 'X'
            IMPORTING
              E_SERV_AGENT_FROM_DELIVERY         =
              E_ROUTE_FROM_DELIVERY              =
              E_LEG_DETERMINATION_DONE           =
              E_NUMBER_OF_CHANGED_LEGS           =
                 TABLES
                   c_xvttk                            = gi_xvttk
                   c_yvttk                            = gi_yvttk
                   c_xvttp                            = gi_xvttp
                   c_yvttp                            = gi_yvttp
                   c_xvtts                            = gi_xvtts
                   c_yvtts                            = gi_yvtts
                   c_xvtsp                            = gi_xvtsp
                   c_yvtsp                            = gi_yvtsp
                   c_xvbpa                            = gi_xvbpa
                   c_yvbpa                            = gi_yvbpa
                   c_xvbadr                           = gi_xvbadr
                   c_yvbadr                           = gi_yvbadr
                   i_xtrlk                            = gi_vtrlk
                   i_xtrlp                            = gi_vtrlp
              I_DEPARTURE_SEQUENCE               =
              I_XVTFA                            =
              I_YVTFA                            =
                 CHANGING
                   c_xvttk_new                        = gi_vttkvb_new
                EXCEPTIONS
                  invalid_change                     = 1
                  route_insert_failed                = 2
                  tdlnr_insert_failed                = 3
                  status_planned_failed              = 4
                  status_registrated_failed          = 5
                  status_loading_start_failed        = 6
                  status_loading_end_failed          = 7
                  status_completion_failed           = 8
                  status_shipment_start_failed       = 9
                  status_shipment_end_failed         = 10
                  OTHERS                             = 11.
              IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
             WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
             ELSE.
                 **** Save shipment created
               CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
           EXPORTING
             WAIT          =
                  IMPORTING
                    return        = gw_return.
              ENDIF.
    Regards,
    shilpa talluri .

    Hi,
    Try this
    DATA: wa TYPE zvariant.
    wa-mandt     = sy-mandt.
    wa-z_var     = 'test'.
    wa-projid      = 'test'. 
    wa-relid        = 'test'.
    wa-srtf2       = 'test'.
    wa-clustr      = 'test'.
    wa-clustd     = ''test'. 
    INSERT zvariant CLIENT SPECIFIED FROM wa.
    Raul Natu

  • Valid from and Valid to are not getting copied to follow up document.

    Hi Experts,
    I am creating job quote as a follow up document from master quote.All are getting copied from the master quote to job quote,but valid from and valid to dates are not getting copied from master quote,instead it is calculating the date from date profile rules.
    But I need to transport the dates from Master Quote to Job Quote.
    Please advice.
    Thanks,
    Adi.

    Hi,
    You need to implement CRM_COPY_BADY for that. Please refer to:
    Re: create a new follow up complaint to the earlier completed complaint
    Regards,
    Nicolas.

Maybe you are looking for