CVD,ECVD,SECVD are wrongly calculating imports MIGO
Hi,
I am unable to post MIGO due to BED,AED,ECS values flowing wrongly. please guide to clear the issue.
Please help ASAP..
Hari Krishna
Hi ,
check that did you completed MIRO for Customs before GR ????
Also check the duty is flowing in PO condition TAB.
please tell us the process you are following
Check following links
[LINK1|http://help.sap.com/saphelp_46c/helpdata/en/fd/45c23d9d6411d189b60000e829fbbd/content.htm]
[LINK2|Import PO process;
Similar Messages
-
Import: CVD Base Value field is blank in MIGO
All SAP gurus,
We are running a Import's scenario.
For this we have created Z condition types for CVD and BCD, maintained all the condition types in pricing procedure (Customs Duty and CVD etc)
Excise defauls are also maintained.
problem we are facing is:
Base value field is blank in MIGO and CVD amounts are not coming automatially from PO.
When we maintained the values for CVD manually, accounting entry is correct.
Which settings might be missing.
Regards,HI,
You need to enter the custom invoice number while doing GR wrt to Import PO, it will ask you the commercial invoice number which is your custom clearing agent invoice number once you put the invoice number and the year of the invoice, the base value will be come from there. Also check quantity with which custom commercial invoice was posted in the system should be equal to GR qty.
BR
Edited by: Sujoy on Feb 20, 2010 11:20 AM -
Excise calculated at migo is wrong
hi friends.
i have maintained tax code for 8%, 2%, 1%, for bed, ecess, and secess respectively and 4% vat
the Bed calculated at migo is wrong, it is calculating little more, what is the procedure to rectify this,
please give all respective hints..
thanks in advance...Hi,
Please check the validity period for tax conditions if you are using TAXINN procedure. -
In import process,how excise base value is calculated in MIGO
Hi expert's,
In import process,how excise base value is calculated in MIGO,with what referance values get add to base value.
waiting for your valuable response,
Regards
V.rajhi,
we Tried with your following reply ! but still not finding exact value in base value .
(MATERIAL PRICE* QTY IN MIGO * EXCHANGE RATE)
thanks & regards
V.Raj -
ECESS and SHECESS in Import MIGO
Hi all,
I search in Forum regarding this issue
Education cess and SHEducation cess is not getting updated automitaclly in import MIGO even i maintained Excise defaults correctly. please advise me is any note or any configuration has to follow.
regards.Hi,
JCDB IN Basic customs
JCV1 IN CVD
JECV ECESS on CVD
J1CV S&H Edu.Cess on CVD
JEDB Customs Edu. Cess
JSDB Custom S&HEdu. Cess
JADC Add. Customs duty
Every condition type maintained in PO and there is no problem in PO and MIRO the Ecess(JECV) and the SHEcess(J1CV) values are not coming into MIGO(J1IEX).
regards -
Delivery date in the PR is wrongly calculated
Hi,
This is a severe issue we are facing, delivery date in PR is wrongly calculating. consider this example:
sales order was created on 31.08.2007 and the planned delivery time assigned in MMR is 9 days, GR processing time is 1 day. Due to some reasons we have created PR on 17.09.2007 but the system is showing the delivery time as 17.10.2007 the release date is on 05.10.2007
Can any body tell me how system calculates delivery date in PR and wat are the factors influence this calculation and also the reason for this unusaual behavior of the system?
Many thanks for your quick reply.
SriPlease request one Abaper to solve this problem.
You cannot due nothing as the problem is in Code.
Regards
William -
Do I need a different apple ID for each device I have? I have two iPads and an iPod but I can only make purchases with the first one I purchased. It tells me the security questions are wrong but I know they are not because I wrote them down. I have also reset them and my password once. Please help if you can
You can not login into iTunes or the App Store using VPP credentials. You must purchase all apps/book/etc. from the VPP website. Then you can redeem the codes thru itunes/app store or import the codes thru apple configurator. Here is the url for the VPP website: https://volume.itunes.apple.com/WebObjects/MZFinance.woa/wa/login?cc=us
(It will not affect any of the apps you already have but the id can only be used for VPP.)
Cheers,
Alec -
R/3 archiving - wrong calculated field on 2LIS_02_ITM extractor
Hello.
An info and a question for who developed an archiving with r/3..
We have found an issue related with the R/3 archiving and LIS_02_ITM.
A calculed field (Delivery Quantity Variance in %); (field name = MABW) (you can see it at http://help.sap.com/saphelp_nw04/helpdata/en/58/f6383fdb800804e10000000a114084/frameset.htm )gives wrong data.
The MABW is calculated using MSEG infos.
MSEG infos were archived (and deleted), so, the calculation goes bad and returns wrong value.
In front of the archiving process, we potentially will find problems due to the standard extractor behaviour.
Have you ever noticed the same behaviour because of the wrong calculation onto the fields?
thank you in advance for your cooperation...!
Dieguz
The details are the following :
We have a R/3 PRODUCTION system (called MP0), connected with three BW
ones (MP2,
MP4, AP4).
Someone performed an R/3 data archiving, using an archiving tool
(IXOS).They archived the data with a one-to-one object approach :
FI_DOCUMNT archived 18 months from clearing date.
MM_MATBEL archived 24 mesi from posting date
SD_VBRK archived 24 mesi from posting date
RV_LIKP archived 24 mesi from posting date
SD_VBAK archived 24 mesi from posting date
MM_ACCTIT 18 months from posting date
OIG_SHIPMNT 24 months from posting date
MM_INV_BEL 24 months from posting date
RL_TA 12 months from posting date
RL_TB 12 months from posting date
In the R/3 system, after the archiving, those documents were deleted.
Our BW systems extract data using custom extractors and standard ones.
- 2LIS_02_*
- 2LIS_03_BF
- 2LIS-11_*
- 2LIS-17_*
- 2LIS_13_*
- 0FI_AR_4
- 0FI_GL_4
- 0FI_AP_4
- 0EC_PCA_3
- 0CO_OM_CCA_9
We have found problems with 2LIS_02_ITM;
During the delta extraction, we found records related with Purchase
Order, with GR archived, that have MBAW field (Delivery Quantity
Variance in %
) with "-100" value; the correct value should be "0" (because the
Purchase Order was completed).
MP0 is a 40B R/3 SYSTEM SP 83, PLUGIN 2004.1
Thank you in advance for you cooperation
best regards
DiegoHi Waldemar,
LOEKZ (Deletion indicator in purchasing document) is not available in standard extract structure we have append that field with append structure in RSA 6.
BUKRS is available in standard extract structure :
In lo-cockpit open extract structure and select BUKRS(Company code) field transfer to left side .
2. click data source maintenance check BUKRS field .
you will get BUKRS field in 2lis_o2_ITM
Thanks
Sree -
Import MIGO- Commercial invoice number pop up screen
Dear All,
I want to make the pop-up screen mandatory (which asks Commercial Invoice) which arises making Import MIGO.
Any standard setting is there or to be done with abapers?
Please advice
RegardsHi
If you have entered JCV1 (CVD)condition in your PO ,During MIGO pop up for entering Commercial Invoive will appear.Ensure that you have maintained the JCV1 condition in the Excise defaults setting
Regards
Sandeep -
PICTURES ARE FUZZY WHEN IMPORTED TO DVD DISC
I'm new to creating dvds. Pictures are fuzzy when imported to dvd disc ( memorex DVD-R). What am i doing wrong?
Hi
Hard to say as You don't suply any info on
• What photo file format, size You use
• How You go from photo to iDVD
And ! - Please do not Yell ! - Capitalized letters = Yelling in most forums and here a low and polite conversation most often will get better and more rapid results.
Some thoughts about DVD Quality
• DVD can only be SD-Video what ever tool used to encode it. And that is much less than what Your Mac screen can show.
• Tools used to create the SlideShow - give a very different (quality) result
iMovie'08 to 11 - discard every second line = less resolution
iMovie HD6 and FinalCut - full interlaced video over to iDVD (as good as it can be)
FotoMagico™ _ Great and even more so if result is burned as a Blu-Ray Disk
Some notes follows - if You are of interest.
DVD quality
1. iDVD 08, 09 & 11 has three levels of qualities. (version 7.0.1, 7,0.4 & 7.1.1)
iDVD 6 has the two last ones
• Professional Quality (movies + menus up to 120 min.) - BEST
• Best Performances (movies + menus less than 60 min.) - High quality on final DVD
• High Quality (in iDVD08 or 09) / Best Quality (in iDVD6) (movies + menus up to 120 min.) - slightly lower quality than above
About double on DL DVDs.
2. Video from
• FCE/P - Export out as full quality QuickTime.mov (not self-containing, no conversion)
• iMovie x-6 - Don't use ”Share/Export to iDVD” = destructive even to movie project and especially so
when the movie includes photos. Instead just drop or import the iMovie movie project icon (with a Star on it) into iDVD theme window.
• iMovie’08 not meant to go to iDVD. Go via Media Browser or rather use iMovie HD 6 from start.
3. I use Roxio Toast™ to make an as slow burn as possibly eg x1 (in iDVD’08 or 09 this can also be set)
This can also be done with Apple’s Disk Utilities application.
4. There has to be about or more than 25Gb free space on internal (start-up) hard disk. iDVD can't
use an external one as scratch disk (if it is not start-up disc).
5. I use Verbatim ( also recommended by many - Taiyo Yuden DVDs - I can’t get hold of it to test )
6. I use DVD-R (no +R or +/-RW)
7. Keep NTSC to NTSC - or - PAL to PAL when going from iMovie to iDVD
8. Don’t burn more than three DVD at a time - but let the laser cool off for a while before next batch.
iDVD quality also depends on.
• DVD is a standard in it self. It is Standard Definition Quality = Same as on old CRT-TV sets and can not
deliver anything better that this.
HD-DVD was a short-lived standard and it was only a few Toshiba DVD-players that could playback.
These DVDs could be made in DVD-Studio Pro. But they don’t playback on any other standard DVD-layer.
Blu-Ray / BD can be coded onto DVDs but limited in time to - about 20-30 minutes and then need
_ Roxio Toast™ 10 Pro incl. BD-component
_ BD disks and burner if full length movies are to be stored
_ BD-Player or PlayStation3 - to be able to playback
The BD-encoded DVDs can be play-backed IF Mac also have Roxio DVD-player tool. Not on any standard Mac or DVD-player
Full BD-disks needs a BD-player (in Mac) as they need blue-laser to be read. No red-laser can do this.
• HOW much free space is there on Your internal (start-up) hard disk. Go for approx. 25Gb.
less than 5Gb and Your result will most probably not play.
• How it was recorded - Tripod vs Handheld Camera. A stable picture will give a much higher quality
• Audio is most often more critical than picture. Bad audio and with dropouts usually results in a non-viewed movie.
• Use of Video-editor. iMovie’08 or 09 or 11 are not the tools for DVD-production. They discard every second line resulting in a close to VHS-tape quality.
iMovie 1 to HD6 and FinalCut any version delivers same quality as Camera record in = 100% to iDVD
• What kind of movie project You drop into it. MPEG4 seems to be a bad choice.
other strange formats are .avi, .wmv, .flash etc. Convert to streamingDV first
Also audio formats matters. I use only .aiff or from miniDV tape Camera 16-bit
strange formats often problematic are .avi, .wmv, audio from iTunes, .mp3 etc
Convert to .aiff first and use this in movie project
• What kind of standard - NTSC movie and NTSC DVD or PAL to PAL - no mix.
(If You need to change to do a NTSC DVD from PAL material let JES_Deinterlacer_3.2.2 do the conversion)
(Dropping a PAL movie into a NTSC iDVD project
(US) NTSC DVDs most often are playable in EU
(EU) PAL DVDs most often needs to be converted to play in US
UNLESS. They are play-backed by a Mac - then You need not to care
• What kind of DVDs You are using. I use Verbatim DVD-R (this brand AND no +R or +/-RW)
• How You encode and burn it. Two settings prior iDVD’08 or 09
Pro Quality (only in iDVD 08 & 09)
Best / High Quality (not always - most often not)
Best / High Performances (most often my choice before Pro Quality)
Yours Bengt W -
Why does Adobe so often tell me my ID and password are wrong?
I'm very frequently told that my ID/password are wrong!! I change them and then soon get the same annoying message. How do I stop this recurrent problem?
jedokie
The Adobe Chat sounds intriguing. Was the bottom line on the chat resolving or unresolving?
If you want to send a copy of the chat to me for private viewing, I think the better way would be to send it to me via the Adobe Forums private message system.
To do that, click on my ID at the top of one of my replies in your thread in order to open to my profile page. To the right of that page you will see an orange envelope icon with the word Message next to it. That is the route for the private message sending.
I am going to ask a moderator to remove your email link since any contact information in these threads is public, and your email address would be open to nuisances.
If you have DVD-VIDEO on DVD disc, you can rip (copy) video files from that disc and get the video Files (VOBs) to the Premiere Elements Timeline for editing and exporting. Some insists that these video files (VOBs) should be converted to MPEG beforehand. That is not necessary for Premiere Elements and the route described. If problems surface in the route cited, then we troubleshoot them for many factors. All you are going to do in process
a. put your DVD disc in the DVD/CD burner tray
b. open Premiere Elements (pre-set to DV standard or widescreen) and use Add Media/"DVD camera or Computer Drive"/Video Importer where you select your video file(s) VTS_01_1.VOB and, if large DVD content, more in that series.
More details to follow if necessary.
Thanks.
ATR -
I am trying to download music onto my phone and it is saying I need to answer sercurity questions and the questions they are asking I have never answered before therefore I don't know the answers and so when I put the answers I think it is they are wrong I don't know how to fix this I answered the questions twice and so I need help to answer them as I don't want to lock my phone please help me
Not Possible...
Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact
Good Luck. -
I am trying to install my downloaded flash player on my new MacPro hard drive. I get the continual message that my I.D. and password are wrong. I know they are not wrong and have tried a lot of combinations from old Macs and old passwords too. Nothing works. How can I get the job done?
Hi,
On Mac, this password prompt is presented by your operating system, and is intended to keep you from accidentally installing software which can harm your system. Flash Player does not throw this prompt, Apple does that.
Please provide machine credentials of currently logged in User to continue with the installation.
Hope this helps.
Thanks
Piyush -
Excise values are not flowing in MIGO
Dear All,
I am facing a problem during MIGO.
THERE IS STOCK TRANSFER BETWEEN 2 PLANTS AND 2 PLANTS ARE UNDER DIFFERENT COMPANY CODES.
1 I have created a PO.
2.Delivery through VL10D
3.Picking-vl02n
4.Created Bill-VF01
5.Created Invoice and saved it
When I am doing MIGO the excise values are not following.in migo SCREEN.I I want to know do i need to post EXCISE INVOICE and how to do the same.
Pl let me know anything is missed out so that excise invoice is not flowing in MIGO screen.
Regards
ManashHi,
Have you miantained Tax code in STO ? if yes, then have you mainatained Settoff as 100% for that Tax Code in FV11 for which combination you are using
SETOFF Must Be Maintained:-
JMX1 -- IN: A/P BED setoff
JEX1 --- Ecess Setoff Sta
HX1 IN: A/P SECess SOTot
If it is there please follow the Following steps for STO
1. Create Purchase Order(STO) using ME21N
2. Create Outbound Delivery using VL10B
3. Create Billing Document using VF01
4. Create Excise Invoice using J1IIN
5. GR with respect to Inbound delivery and in Excise Invoice give number of VF01.
Hope Help U !
Regards,
Pardeep Malik -
All FAX sent to China vendors are wrong.
Hi all, i have this issue, one of the guys are complaining in China:
"All FAX sent to China vendors are wrong but it's OK if the FAX receiver is oversea of China."
i did a test for other faxes in USA and it worked fax, email,, this is the only guy who is complaining for sending faxes in China
What you think could be the issue?
this is the error:
No delivery to FAX (xxxxxxxxxxxxxxxxxxx)
Message no. XS812
Diagnosis
The message could not be delivered to recipient FAX (xxxxxxxxxxxxxxxxx). The node gave the following reason (in the language of the node):
No fax machine detected
System Response
Processing was ended normally.
Additional information of the node used (in the system language of the node):
No fax machine detected
Procedure
Use the documentation of the node to check which actions are necessary.
========================================================================
Could be "The Recipient value" be wrotte wrongly (the fax number)?
This is the format they are usnig for fax number into SCOT tcode:
CN XXX-XXX-XXXXX 5 numbers at the end ..
CN XXX.XXX.XXXX 4 numbers at the end
CN XXX-XXXXXXXX 8 numbers at the end (only 1 "-").
Please your help, thanks in advance.Hi,
See this SAP Note hope this will help you..
Note 418361 - SAPconnect: TOPCALL message conversion problem
Regards
Maybe you are looking for
-
I activated secure virtual memory on snow leopard and now have lost everything
Hi, wow I could use some help. I was curious and activated "secure virtual memory" in the security settings on my iMac 2.16 Ghz Intel core 2 duo and restarted. Now I can't access any of my files and the "users" folder won't open saying I don't have s
-
Displaying 20 checkboxes in three columns
In order to display a database item (table 1) item as check box. the values of chexk boxes are the results of another table with 20 records (table2), this I will have 20 check box in my form. I proceed like the following : I created a region with typ
-
Content movement from MOSS 2007 to SP 2013
Hi, I have a site collection in MOSS, a site has a document library with OOB Approval workflow, and the library has documents too. Now, I have requirement wherein I need to move the documents from Moss to SP 2013, and the document should persists th
-
my macbook won't copying anything to any external hard disk drivers same time can copying to any flash memory my macbook with ratina display the newest virsion
-
Hi all, Names Kev, decided to return to Nokia phones, after a spell with an LG... Went for a 6220 Classic, had 2 of them in 3 weeks, kept breaking so have now gone for a 5220XM... love it! Any hits / tips / bugs to be aware of? Cheers Kev Nokia 5800