Cvfsck -j doesn't do anything?
We're having a problem starting the volume
running cvfsck shows problem on the file system ( orphaned direcotries , wrong inode link counts ) ...etc.
running cvfsck -j does absolutely nothing , you press enter and the prompt is back
I'm stuck with a file system that can't start or mount
anyone had this happening before ?
Any help is appreciated
running xsan 1.3 and 10.4.6 on the MDC
This is the output of cvfsck , if it's useful
also , earlier I made a snapshot and copy of the config dir,
====================
./cvfsck
Xsan File Systems on host sugar:
1) *Halim_despot
The asterisk (*) denotes the file system is active.
Choose a file system by number (1-1) or zero (0) to exit -> 1
Warning: File system 'Halim_despot' is active!
Created directory /tmp/cvfsck283a for temporary files.
** NOTE ** Read Only Check.
File system journal will not be recovered.
The results may be inconsistent and mis-leading.
Super Block information.
FS Created On : Sat Apr 22 19:22:45 2006
Inode Version : '2.3'
File System Status : Dirty
Allocated Inodes : 388096
Free Inodes : 51705
FL Blocks : 33
Next Inode Chunk : 0x174db
Windows Security Indx Inode : 0x6
Windows Security Data Inode : 0x7
Quota Database Inode : 0x8
ID Database Inode : 0xd
Client Write Opens Inode : 0x9
Creating meta1 allocation check file.
Creating Halim_material allocation check file.
Creating despot allocation check file.
Stripe Group meta1 ( 0) 0x3a6f700 blocks.
Stripe Group Halim_material ( 1) 0x2bbf7a00 blocks.
Stripe Group despot ( 2) 0xe9bff00 blocks.
Building Inode Index Database 302080 ( 77%).
Error: buildinodes: Corrupted inode 0x52125bb (Bad Marker(s)).
Building Inode Index Database 388096 (100%).
Verifying Free List Extents.
Scanning inodes 194560 ( 50%).
Out of range block [1](0x48d53000-0x48d530ff in inode 0x1000002cdf27f.
Out of range block [1](0x48d53000-0x48d530ff in inode 0x1000002cdf291.
Out of range block [1](0x48d53000-0x48d530ff in inode 0x1000002cdf2ae.
Scanning inodes 388096 (100%).
Sorting extent list for meta1 pass 1/1
Updating bitmap for meta1 extents 2137 ( 0%).
Sorting extent list for Halim_material pass 1/1
Updating bitmap for extents Inode 0x1000002cdf27b (base-0x5bc00 end-0x5bcff depth-2) block 0x5bc00 doubly allocated!
Updating bitmap for Halim_material extents 92160 ( 10%). Inode 0x1000002cdf2ae (base-0x2d7ae00 end-0x2d7aeff depth-2) block 0x2d7ae00 doubly allocated!
Inode 0x1000002b889cc (base-0x2d7c600 end-0x2d7c6ff depth-2) block 0x2d7c600 doubly allocated!
Inode 0x1000002b88a38 (base-0x2d7ea00 end-0x2d7eaff depth-2) block 0x2d7ea00 doubly allocated!
Updating bitmap for Halim_material extents 389120 ( 42%). Inode 0x523586a (base-0xb61cd00 end-0xb61cfff depth-2) block 0xb61ce00 doubly allocated!
Updating bitmap for Halim_material extents 399360 ( 44%). Inode 0x8000021c84ab (base-0xbaabe00 end-0xbaabeff depth-2) block 0xbaabe00 doubly allocated!
Inode 0x5235944 (base-0xbbeed00 end-0xbbeeff6 depth-2) block 0xbbeee00 doubly allocated!
Updating bitmap for Halim_material extents 614400 ( 67%). Inode 0x52359b6 (base-0x155ba400 end-0x155ba4ff depth-2) block 0x155ba400 doubly allocated!
Inode 0x52359b6 (base-0x155ba600 end-0x155ba6ff depth-2) block 0x155ba600 doubly allocated!
Updating bitmap for Halim_material extents 768000 ( 84%). Inode 0x1000002b88a78 (base-0x2400e200 end-0x2400e2ff depth-2) block 0x2400e200 doubly allocated!
Inode 0x1000002cdf291 (base-0x246a9800 end-0x246a98ff depth-2) block 0x246a9800 doubly allocated!
Updating bitmap for Halim_material extents 824410 ( 90%).
Sorting extent list for despot pass 1/1
Updating bitmap for despot extents 907608 ( 99%).
Checking for dead inodes 112640 ( 29%).
Clearing Inode 0x8000021c84ab.
Checking for dead inodes 184320 ( 47%).
Clearing Inode 0x1000002b889cc.
Clearing Inode 0x1000002b88a38.
Clearing Inode 0x1000002b88a78.
Checking for dead inodes 194560 ( 50%).
Clearing Inode 0x1000002cdf27b.
Clearing Inode 0x1000002cdf27f.
Clearing Inode 0x1000002cdf291.
Clearing Inode 0x1000002cdf2ae.
Checking for dead inodes 296960 ( 76%).
Clearing Inode 0x52125bb.
Clearing Inode 0x523586a.
Clearing Inode 0x5235944.
Clearing Inode 0x52359b6.
Checking for dead inodes 388096 (100%).
Checking directories 243 ( 55%).
Directory entry 0011492.dpx (p=0x45ad5f0 i=0x52125bb flags=0x31) is an orphan. Removed.
Directory entry 0011863.dpx (p=0x45ad5f0 i=0x5235944 flags=0x33) is an orphan. Removed.
Directory entry 0011901.dpx (p=0x45ad5f0 i=0x52359b6 flags=0x33) is an orphan. Removed.
Directory entry 0011790.dpx (p=0x45ad5f0 i=0x523586a flags=0x33) is an orphan. Removed.
Checking directories 264 ( 79%).
Directory entry r4.0016802.dpx (p=0x52dea0d i=0x8000021c84ab flags=0x33) is an orphan. Removed.
Checking directories 268 ( 97%).
Directory entry r3.0012792.dpx (p=0x5c22ec9 i=0x1000002b88a38 flags=0x33) is an orphan. Removed.
Directory entry r3.0010664.dpx (p=0x5c22ec9 i=0x1000002cdf2ae flags=0x33) is an orphan. Removed.
Directory entry r3.0012799.dpx (p=0x5c22ec9 i=0x1000002b88a78 flags=0x33) is an orphan. Removed.
Directory entry r3.0010662.dpx (p=0x5c22ec9 i=0x1000002cdf291 flags=0x33) is an orphan. Removed.
Directory entry r3.0012780.dpx (p=0x5c22ec9 i=0x1000002b889cc flags=0x33) is an orphan. Removed.
Directory entry r3.0016766.dpx (p=0x5c22ec9 i=0x1000002cdf27b flags=0x33) is an orphan. Removed.
Checking directories 269 (100%).
Scanning for orphaned inodes 388096 (100%).
Verifying link & subdir counts 215040 ( 55%).
Error: Inode 0x45ad5f0 link count is 28253 - should be 28249. Fixed.
Verifying link & subdir counts 307200 ( 79%).
Error: Inode 0x52dea0d link count is 24850 - should be 24849. Fixed.
Verifying link & subdir counts 378880 ( 97%).
Error: Inode 0x5c22ec9 link count is 15198 - should be 15192. Fixed.
Verifying link & subdir counts 388096 (100%).
Super Block - Free Inodes of 0xc9f9 is wrong! Should be 0xca0b.
Repairing free list.
Checking pending free list. 0 Inode 0x2cdf27f is free but still in pending free list.
checkpending_freelist FOUND 1 ERRORS
Checking Arbitration Control Block.
Checking meta1 allocation bit maps (100%).
Checking Halim_material allocation bit maps (100%).
Checking despot allocation bit maps (100%).
Warning: ! File system 'Halim_despot' would have been modified!
File system 'Halim_despot'. Blocks-1040347136 free-169040759 Inodes-388096 free-51723.
====================
Similar Messages
-
I have money in my itunes account but when I try to buy a song it doesn't let me buy it or download. It doesn't do anything!
You cannot and need to ask Apple to reset your security questions. To do this, click here and pick a method; if the article doesn't list one for your country or you're unable to call, fill out and submit this form.
Changing the rescue email address requires supplying two of the answers. They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
(111899) -
MSI 970a-g46 motherboard starts up but doesn't display anything.
Hello, I'm having problems with a new motherboard I got from Amazon, specifically the 970a-g46. The following are my specs in use with this motherboard:
CPU: AMD Phenom 2 x4 965
GPU: nVidia GeForce 560 GTX
Ram: 8gb Kingston HyperX Fury 1866mhz.
PSU: Corsair 650TX (650 Watts)
Compatability-wise, everything checks out so I wasn't expecting problems at first. All the other parts excluding the ram I've used before. Here's exactly what happens:
I power up the computer after everything is installed and connected. The 4 phase LEDs turn on which tell me the CPU is powered up and working (so I assume). I don't get any beeps or buzzs mainly because I don't see any speaker/buzzer on this board. The monitor blinks and while it is connected to my GPU, it doesn't display anything, it's just a black screen. I can leave it on for a few minutes and I'll still not see anything happen. An important observation here is that my keyboard which has LEDs will turn on after a short period of time in boot-up (with my older set-up that is). This does not happen ever regardless of how long I leave my computer on on this new mobo.
I've gone over and checked/tested numerous things:
* The PCI-E and ATX cables for the GPU, motherboard and CPU are all connected and secured (I've tried both 4-pin and 8-pin connections for the CPU, neither help).
* I've tried jumping the CMOS multiple times to no avail.
* I tested the ram on another computer and it worked just fine on that one.
* I've tested the motherboard without a GPU and it still does nothing (though I think that's because this motherboard doesnt have its own integrated GPU for some reason).
So far the only possible reasons why my computer is not working is because of my PSU (very unlikely as it's only a year old and it's a Corsair, which I've heard is very reliable in the long-run), GPU (It is quite a few years old but even without the GPU my computer still doesn't go past boot-up), CPU (possible due to its age and how many freaking time I've reseated it (probably around 8 times) so I wouldn't doubt it, but before I put it into this motherboard I did check its pins and they were all there and placed nice and smoothly into the socket.) and finally the motherboard (it's possible that this is just a defected motherboard and giving me a super hard time which would be a first in all the years I"ve spent computer building).
The best case scenario of course is me giving some kind of oversight to how I transferred over the parts and connectors. I might've missed something obvious to please any advice/insight on how I can solve this problem would be greatly appreciated
EDIT: Some other things I did but forgot to mention:
* Checked ground nut things and ensured they matched the specifications of the motherboard ATX; only 6 are under the board and each one is aligned up with the holes on the board as designed.
* Tried booting up without powering the CPU. Only one phase LED light came on, still the same problem (for an obvious reason this time now).
* Re-seated GPU multiple times, re-connected cables multiple times.
What I have NOT done is re-seat the CPU because I am almost out of acetone so I would need to get another supply of that which won't be until tomorrow. I also have not re-seated everything back on my older motherboard to check if it still works. Tomorrow I'll most likely do that and if I find that the old motherboard works flawlessly then that tells me that the new motherboard I got is either defected or there's some compatability issue I"m missed out on.
EDIT 2: Just found a speaker and plugged it into the motherboard. Booted it up and I got no beeps whatsoever. So this mobo is giving me no video activity (there is a signal it's just blank), and no beeps from the motherboard. I have no idea what that could mean at this point.
EDIT 3: I decided to test a few things with the new speaker I just got. First I removed ram and tried running, I got 3 beeps which I assume is the beep sequence of faulty/no ram. Removed the power to CPU and the GPU itself individually, gave no beeps this time.Quote from: rhradacut on 06-January-15, 16:49:14
What's the serial number of your MB? Needed to determine what BIOS may be on the MB. Exactly which version of the CPU is it? There were several different 965 CPUs and they required different BIOS versions, 1.2, 1.9,2.2 depending on which CPU you actually have.
Also another problem may be that native memory supported by your CPU is DDR3-1333, not 1866
None of the supported CPUs have integrated graphics, any MB graphics would be in the chipset, not CPU. Examples would be 785G, 880G
Thank you very much rhradacut! The problem was that the mobo for whatever reason was forcing 1866mhz on my CPU when it only supported up to 1600mhz. I had to install a spare ddr3 module to downclock it so that I could access the BIOS and manually set the DRAM timing to 1600mhz for it to work. That's a very strange problem that I figured would've been auto-resolved by the hardware, and would also be a big problem if I didn't have any spare DDR3 ram to work with.
Once again thanks for helping out on solving my problem. -
hello applecare can you help with the macbook pro i did the update the last one and safari doesn't open anything .. what should i do ?
Hello John...
You may have a Safari third party add on installed that was compatible with the previous version of Safari but not 5.1. Try troubleshooting > Safari: Unsupported third-party add-ons may cause Safari to unexpectedly quit or have performance issues
FYI... this is a user to user forum. If you can't resolve the issue, information for contacting AppleCare here. -
I downloaded latest software on iphone 4 and installed new software on my imac (snow leopard 8.6)and now phone not synching with new itunes. Itunes does recognize the phone but the itunes is totally different now. It doesn't look anything like the previous vesions. I can't even find a tab for synching. very strange. any help is appriciated.
iTunes 10.7 is compatible with Snow Leopard.
You can download it here: http://www.apple.com/itunes/ -
My 'clear history button is not working. When I click on it it doesn't do anything and the letters are gray instead of blue like usual. I've gone to every type of settings I can think of but I don't know how to fix it. Please help .
T
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device. -
I have an iPad 3rd gen. A carrier settings update notification has appeared on my screen, and it doesn't do anything when I press either 'update' or 'not now' . Because the notification is still there, I am unable to use any apps or shut it down. What should I do?
Have you tried a reset by pressing and holding the sleep/wake button and the home button for 20 seconds (maybe longer) until the Apple logo appears, ignore the red slider. Then turn back on. You won't lose any data doing the reset.
-
im trying to instal snow leopard on my macbook. its running tiger 10.4.11 and it meets all the requirements but it ask me for a restart to begin instalation progres, i restar it and it doesn't happen anything. anyone can help me?
I assume the restart was prompted during the installation process?
First of all, that restart will take several minutes while files are moved into place and should not be interrupted.
If it fails, or you have interrupted the process, you'll need to boot from the installer (hold down the C key on startup) and use Disk Utility to erase the drive prior to continuing the installation.
That will wipe all data on the drive, though, so if you didn't make a backup before beginning the upgrade, you'll need to get your data off safely before proceeding. That may likely require the use of another Mac to access yours in Target Disc Mode. -
I can create an action but the droplet doesn't do anything when I drop a file on it. I am running Adobe Photoshop CC 2014 on a 64 bit Windows7 PC. I exactly followed the steps on a youtube video on how to create an action and how to create a droplet.
Thanks for the reply, I tried that but i wasn't able to get it to work. I also tried to see if l could using the
function functionName()
and I was still unable to.
Silkrooster wrote:
I haven't tried it yet, so i could be way off. But since you assigned it to a variable I would say it won't do anything until to call that variable. I would assume there must be a show command or similar that is needed for it to display.
My experience is with actionscript and javascript but still I lean towards basic. I don't feel comfortable enough to say I am any higher yet as more experience is needed in my opinion.
So feel free to take my advice with a grain of salt. -
I'm trying to set up a dual monitor for my new iMac. I'm using a second display I used with my old G5. My iMac recognizes the second monitor but the monitor won't turn on. Power button doesn't do anything on the monitor itself.
If it won't turn on then the monitor is dead (power supply?, video circuits?). Not worth repairing.
If you have a new iMac then it has thunderbolt. So exactly what is that monitor you are trying to connect? For TB you can connect a mini-displayport monitor. Probably (not 100% sure with TB) can use dvi or vga too if you have the appropriate adapter. -
I recently got an extension cord for my ipad charger and the first time I used it it worked and now when I plug it in to my ipad It doesn't do anything. What do I do?
I think that we all understood what you meant. If the extension cord is no longer working, then return it.
We are all trying to tell you that you can plug the power block into a standard household extension cord - using the short cord that came with the iPad - and there is no need for the extension cord that you bought.
Edit - one upped by the lovely lady with the pretty kitty avatar -
I want to uninstall and then reinstall Firefox but I can't uninstall it. Nothing happens when I click remove in program access and defaults and the helper.exe file in the firefox uninstall dir doesn't do anything either.
"program access and defaults" is not the place to remove programs in Windows. You need to go to the control panel and click on Add and Remove programs. For instructions on how to uninstall Firefox, see [[Uninstalling Firefox]]
-
I'm a long-time FF user. Am using version 22 now (which appears to have updated from 18 by itself though I had it set to ask me before updating - but 22 2 worked fine for me once I'd solved the problem of screen being so large it hid my upper menu and tabs). Now suddenly, just in the last week, entering a (valid) url in the search bar and hitting enter doesn't 'do' anything. No search capability at all because hitting enter doesn't cause FF to take any notice of me putting in a URL for a site I want to go to (I use the same sites over and over so not just some new site acting up).
Not my keyboard or mouse malfunctioning; they function as usual in other programs I use constantly - email, inventory database - and no updates on either program, in Word, Excel, NotePad, my photo program, whatever. Security Essentials updated about a week ago but I can't see inside it to see if it changed anything. Am an XP Pro user and keep it updated (till next year, anyway!). Keyboard is an Elite Real Force, mouse Evoluent (corded). Have used both for a couple of years so not new to me.
Only way I can use FF 22 in the last few days to get to 'any' site, including my own, is to either go from the sites pinned to my opening screen or from my bookmarks. I tried unpinning some of the sites on my opening screen and then typing in their URL and hitting enter but that didn't change anything - the search bar is still inoperable and hitting 'enter' doesn't do anything at all.
So why did my search bar quit working? Is there a fix?Hi aaabooks, you wrote:
<blockquote>I did the Help > Troubleshooting Information > "Show Folder" button bit you said to do but is there something I'm supposed to do re the 'switch back to FF' you speak of? Like click on 'Reset FireFox' to Default State first?</blockquote>
No, do not use the Reset feature. When you click "Show Folder" Windows opens a Windows Explorer window with your personal settings files listed. I want you to delete a file in that folder, but first, I want Firefox to be closed. When I said to switch back to Firefox and exit, I meant to make Firefox the active window, then use File>Exit or Firefox>Exit to close the application. -
I just updated my iTunes and now all of a sudden my iPhone is not syncing into iTunes. When I plug my iPhone into my computer, a thing pops up on my iPhone saying "Do you trust this computer" and I press "Trust" but it still doesn't do anything.
Sorted it out. If anyone has this problem i reccommend visiting http://forums.ilounge.com/ipod-classic-ipod-5g-video/237546-ipod-classic-80gb-fr eezes-itunes-need-restore-plz-help-2.html#post1403546 there's some pretty good advice on it. have to go into control panel and re-format iPod into NTFS file. good luck.
-
I'm trying to downgrade my storage on my ipod but when I chose my new storage i'm not able to complete the choice because the 'done' button doesn't do anything. can someone please give me some advice?
Are you choosing a different plan before tapping Done?
To downgrade, you should be doing the following:
Go to Settings > iCloud > Storage & Backup.
Tap Change Storage Plan.
Tap Downgrade Options and enter your Apple ID password.
Choose a different plan to use when your current storage plan expires.
Tap Done.
Maybe you are looking for
-
When I use my 2311x as an external monitor for my Macbook Pro, the monitor will start up and work until I try to move a window from the screen of my MacBook to the monitor, at which point the monitor will become disconnected from the computer. It wil
-
How to make changes in the init.ora stick through Autoconfig?
I make a change to my init.ora file and then when I run Autoconfig it overwrites my change. How can I keep this from happening?
-
Audit Logs Empty in Communication Channel
Hi, I am facing an issue in Channel Monitoring.I can see the messages are successful but nothing is displayed in Audit Logs.This is happening for both Receiver and Sender Channel.Earlier i could see the logs but it has started happening suddenly . I
-
Access Tables in an Informix Database that have their table names in lower
Any help greatly appreciated! Thanks
-
Hi all, We are going to implement high availabilty in 5508 WLC with version of 7.3.101 . We will be using Prime infrastructure 1.2 for monitoring purpose. With Prime , whether we can monitor and manage redundant WLC also or only active WLC?... Thanks