CVI 2013 UIR changes are not implement on subsequent build.

I have noticed that on a compiled project if you change the visibility of a UIR object, these changes are not reflected on the subsequent build. There are files that are set to recompile but in least some cases the change to the UIR is not reflected by a "build" (or Ctrl M).
Using the new "Rebuild" command from the pull down menu does reflects the expected behavior (the changes to the UIR are seen).
This may be considered normal operation and / or been previously reported, but it was new to me.

Hello blakney, CVI-User,
blakney, it sounds like the bug you've reported originated in the Patch f1. The bug id is 433769 and the fix is likely to be included in our next release.
Two workarounds for the issue are:
    - Use Rebuild every time you make a UI change (if you're using the option).
    - Disable Embed project .UIRs when in Debug configuration and only embed them when you create your release product. The option to embed is configuration-dependent, meaning you can set the debug and release behaviors separately.
Regarding your latter post, [I find that local path UIRs sometime get "lost" in Release64 builds. They link fine in Debug64 mode though.], could you please attach a sample project?
CVI-User, your case might fall under the same use-case (id, 433769). However, could you please attach a sample project, so we can double-check?
Thank you and best regards,
= Nelu F. || National Instruments.

Similar Messages

  • Changes are not reflecting when de-implemented the SNOTE.

    Hi All,
    I have implemented SNOTE : 79847 , which is having two steps one is manual and the another one is automatic . but now i want to de-implement the Snote due to some requirements .
    After de-implementing the Snote ,i checked for changes in the standard program which were automatic . Over there the changes are not reflecting , that is the code which was  got appended due to implementations of note , now it is not getting removed. 
    kindly help me out.....

    Hi All,
    I have implemented SNOTE : 79847 , which is having two steps one is manual and the another one is automatic . but now i want to de-implement the Snote due to some requirements .
    After de-implementing the Snote ,i checked for changes in the standard program which were automatic . Over there the changes are not reflecting , that is the code which was  got appended due to implementations of note , now it is not getting removed. 
    kindly help me out.....

  • Indent changing is possible but changes are not reflecting after refresh

    Hello all,
    I am facing one issue with alignment in the BEX. i need to changed the the result rows. initally the indent is 2 , am changing it to 1 and saving as existing report. after  refreshing the workbook. the changes are not reflecting. can anybody provide me some inputs on these. any help is appreciated.

    Hi Priya,
    You need to Implement the following SNOTE's for these changes.
    Union Budget 2015: As per Finance Bill 2015, the Government has implemented amendments to existing sections and introduced new sections in the Income Tax Act. Changes have been made in the following topics:
    Tax Surcharge Rate
    Increase in Conveyance Allowance
    Section 80
    Sukanya Samriddhi Scheme: The Government has launched this new deposit scheme for the minor girl child. This is a savings scheme that can be opened by the natural (biological) or legal guardian of a girl child aged below 10 years. Related Notes:
    2139208 - Union Budget Changes – 2015
    2138605 - Sec80C: Sukanya Samriddhi Scheme
    Upcoming Developments:
    PF Admin Charges Revision
    Professional Tax for Mizoram & Nagaland states
    Average Rate of Tax
    Regards,
    Venkat Polisetty

  • New changes are not getting reflected in the bam reports.

    Hi
    I have created a BPEL process and it polls the data from a table and populate an object created in Bam.I have accomplished the above task by createing two database adaptors.One is on 10g database and another one is on Bam database.I have created a view based on the bamobject and used a database adaptor to populate the data. BPEL process is populating the data properly to that bamobject but those changes are not reflecting to bam reports automaticaly. We need to refresh the report or reprompt the report to see the changes.Could some help me to reslove this issue.
    Thanks in advance
    Laj Abraham

    Hi charles
    I have tried that option too.But that is also not working. BPEL Procees is able to populate the BAM object with the help of the sensor.But those changes are not getting reflected in BAM Reports.But if i create or update an existing record in BAM object through BAM Architect, those changes are getting reflected in BAM Reports(No manual intervention is required).
    Your help in this regard is highly appreciated.
    Thanks
    Laj Abraham

  • Termstore changes are not getting reflected in the list items in SharePoint 2010 farm environment

    Hi,
    I had created managed metadata with termstores from central admin. Then I had created one list in which added a column of type managed metadata using the managed metadata which I had created. And also added few list items to this list.
    The problem is that after updating a termstore the changes are not reflecting in the list items which were added before the update.
    I have referred the following links:
    http://www.paulgrimley.com/2011/02/managed-metadata-changes-not-applied-to.html
    http://davidfrette.wordpress.com/2010/05/26/taxonomy-update-scheduler%C2%A0timer%C2%A0job/
    According to the links we need to run Taxonomy Update Scheduler on the server for updated termstore to get reflected. After running
    this scheduler on development environment changes are getting reflected but not working on the production environment.
    Kindly help!
    Regards, Shruti

    You should check the obvious.  You made the change in dev, but did you make the change in production too?  And, is the term you updated, actually the one that you are looking at in the list item?
    There is not much, if anything, that can go wrong with that timer job. so I'd guess that the term you are looking at is not the one you think you are updating.
    If you have double checked everything (the term is is in fact the same term id), then you may have something erroring in the update process.  In this case, you should check the ULS logs for any errors.
    Chris
    Chris Givens CEO, Architecting Connected Systems
    Blog Twitter

  • When I external edit an aperture photo using Photoshop Elements 9 and then get out, the changes are not reflected in Aperture when I return - this used to work for me but doesn't seem to have for some time - help please?

    Have used Aperture for some time - at some point this stopped working - not sure when
    workflow:
    click photo and elect to use the external editor (Photoshop Elements 9)
    Copy of the photo is created in Aperture with the "O" badge and I am rolled out to Photoshop
    Have to change the type to 8-bit in Photoshop to start making changes
    When done and I exit I am prompted to save the photo
    On returning to Aperture however the "O" badged photo does not get updated/reflect my changes
    Other Things:
    I can find a changed photo sitting in the Aperture Library using finder or Photoshop itself - so I know changes have been made a new file saved (TIFF).
    I am wondering if I am missing some (new) preference such that the changes are not proerly being saved for re-display/storage in the Aperture Library
    I am running Lion OSX at the moment but the behaviour was the same under Snow Lepoard versions.
    Current version of Aperture is 3.1.3, Elements is 9.0
    Any help/suggestions greatfully received

    Try using psd.  Some rerports indicate some confustion between the apps with TIFF.  See:
    https://discussions.apple.com/message/15921933#15921933
    I cannot confirm, nor test, since I use PS CS5, and not Elements.
    Ernie

  • I've been editing images with ease for a long time but now the changes are not being saved.

    I've been editing images with ease for a long time but now the changes are not being saved.
    Also, it is not liking me adding a large ammount of images in one go?

    Remember: we cannot see your machine. There are 9 different versions of iPhoto and they run on 8 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS.  So to get help you need to give as much information as you can. Basic things like :
    - What version of iPhoto.
    - What version of the Operating System.
    - Details. As full a description of the problem as you can. For instance: 'iPhoto won't export' is best explained by describing how you are trying to export, and so on.
    - History: Is this going on long? Has anything been installed or deleted?
    - Are there error messages?
    - What steps have you tried already to solve the issue.
    - Anything unusual about your set up? Or how you use iPhoto?
    Anything else you can think of that might help someone understand the problem you have.

  • HT4075 I tried the steps mentioned above but the changes are not being saved.

    I am not able to edit or merge PDF files. I followed the steps mentioned in the Mac support community but the changes are not being saved. Any solution to this?

    The link you posted gives be a 404 not found message. 
    The reason you're getting the repeat is because your site name is wilgenroos.nl and the first page of your site is wilgenroos. 
    The standard URL for domain names that are forwarded with the CNAME method is:
    http://www.domain_name.com/site_name/page_name.html.
    You can change the site and page names in iWeb to give you something more informative about the site and page.
    If you're publishing to a  3rd party server and want to get rid of the site name in the url and only have
    http://www.domian_name.com/page_name.html
    do the following:
    publish the site to a folder on your hard drive (already done)
    use Cyberduck to upload just the contents of your site folder to the root folder of your account on the server.
    You should delete the old site folder and files that are currently there beforehand.

  • Changes are not reflected in Script output

    Hi All,
    i am facing a problem in SAPscript.
    I have made a Zscript by copying standard script F110_FR_CHEQUE. I have made the changes in the script as per requirement in development client and transported it to testing client to test (As i dont have any data in development client). But, surprisingly, when i run the program and check the output, the changes are not reflected in the script output.
    First i thought that my script was not triggered thats whay i m not getting any change, but later i changed the dimension of one of the window, in which some hard coded text is written, the differece i found was that, window size is changed, but the text written in that window is still same (what was in standard script.) .
    I am using standard texts for hard coding in script. Standard texts have been transported in testing client also.
    please help me in this regard.

    Hi,
    Could you plese Check NACE whether your script is confiugring or not.
    If it is configured well then Check Standard Text is available or not in Test client by open it in SO10.
    Check all the paragrah formats applied to Standard text are transferred to Test client which are in SE72.
    IF it is available in SO10 then debug the print program for that windows any standard conditions are calling to print the text.

  • Changes are not reflecting in the discoverer workbook

    Hi ,
    I have a report created with user Disco(Disco.Report_name).Now I need to add a column to it and i have done that with other user Discodev but when I save it the changes are not reflected on Disco(Disco.Report_name) rather it is being saved with user Discodev(*Discodev.Report_name*) .
    The User wants that the changes should be reflected on Disco.Report_name (I can't use the credentials of Disco to do this as it is also a user) .
    Appreciate your help !!
    Discoverer Version 4i
    Thanks ,
    Vijay

    Hi West,
    Thanks for the reply.
    I want to get clarified one thing, Is there any option where DISCO user can give Privileges to DISCODEV to make the changes,as the DISCO user is not a common user I have a problem in making the changes.
    Thanks,
    Vijay

  • Changes are not Reflecting in WAD

    Dear Gurus,
    I got a problem in WAD. Changes are not Reflecting in My WAD. When i created NewQuery in WAD by just placing Chart & Saved it. After executing Chart is displaced.Again I updated the same query by placing table and saved it. After Executing Table is not displayed only previously saved Chart is displayed. Could any one Kindly solve my Problem.
    Thanks,
    Sony

    Hi Sony,
    SAP BI has HTTP Cache and the web templates are stored in the HTTP cache of the server. So, when you change a template and execute it again - the previous version which is stored in the HTTP cache is being retreived.
    To correct this, go to TCODE SMICM in the menu bar >> Goto >> HTTP Server Cache >> Invalidate -> Global in system
    Once this is done, ask basis to restart the java engine.
    I hope this helps you.!
    -Pradnya
    Edited by: Pradnya Rane on Sep 29, 2009 8:05 AM

  • Changes are not updating :(

    Hi-
    For the past few days, after I save changes (and these are simple text changes) they are not showing up on my webpage. The upload seems to be a little slow lately, but I'm not getting any error messages......it says it has uploaded. But....my changes are not there
    Is anyone else experiencing this??? Any advice???
    Thanks!

    yes, empty your cache as kabing said!
    a cache saves files from your website when you visit it often - therefore it loads faster. yet when you make changes to your website - they are then not recongnized and the old page is still showing!
    so my advice, empty your cache everytime you publish!
    max

  • Upon startup Firefox says "Proxy is refusing connections." When I select "Auto-Detect Proxy" from Advanced settings and solve problem, changes are not saved and upon next startup I must select again...!

    Firefox 4 was working fine. Then one day, when I started up Firefox, it says "Proxy is refusing connections." I solved this by selecting "Auto-Detect Proxy" from Advanced network settings, but my changes are not saved and upon every start-up I must select it again! (I even completely removed my webroot antivirus protection, as it as hindering many proxy related programs, but this seems to not be the source of the problem)

    You can find the connection settings in Tools > Options > Advanced : Network : Connection
    If you do not need to use a proxy to connect to internet then select "No Proxy"
    See "Firefox connection settings":
    * https://support.mozilla.com/kb/Firefox+cannot+load+websites+but+other+programs+can
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
    See also:
    *http://kb.mozillazine.org/Preferences_not_saved

  • UI Shell :  Changes are not saved. If you leave this page

    Hi,
    My JDeveloper version is 11.1.1.6.0
    I have on VO having all transient attributes. The vo having dependent LOV's . When i am not not selecting the value from lov and trying to close the UI Shlll it is not showing warning message.
    When i am changing the lov then trying to close the UI shelll then it is shows the "Changes are not saved..." warning message. I want to skip the warning message . How to do that
    Thanks
    Deepak

    go to <af:document id="d1" > tag and then property inspector and the n make uncommittedDataWarning to off.
    Thanks
    Pratee.

  • Web template changes are not saved.

    Hello Experts,
    I making a small change to an existing Web Template namely changing the tab page 1 to tab page 2 and  vice versa.
    I could see the message Changes are saved but at the end web template is same like as it was.
    Any idea why changes are not being saved and how to over come this will be of great help.
    Thanks in anticipation.
    Best Regards.

    Hi.
    The changes are not saved in WAD or has not affect when executing the WAD ?
    Regards.

Maybe you are looking for