CVI_EI003 - No customer assigned, you cannot transfer customer data

Hi experts,
I have a problem sync BP, when i'm trying to do it BDOC is returning CVI_EI003 - No customer assigned, you cannot transfer customer data.
I have checked all customizing for CVI, and it's fine.
https://help.sap.com/saphelp_crm60/helpdata/en/72/1298956c744f4399fe372367646757/content.htm
I have also checked note: 931239 and its related note 436843.
But i cannot find the problem and also the solution.
Could you please help me??
Thanks in advance,
Muchas gracias

Hello Gracias,
Can you apply notes 609766 and 757955?
thanks
Willie

Similar Messages

Cannot transfer transactional data

Hi Experts,
I really need your help regarding this incident.
I am having problems with the APO system. I cannot transfer the transactional datas from APO to R/3. However, I am able to successfully transfer the transactional data from R/3 to APO. When I had run /SAPAPO/CCR, it returns the error "No Active Integration Model". Isn't it that integration models are only configured in R/3? I think the integration models in R/3 are properly created coz I am able to transfer the transactional data from R/3 to APO.
I would really very much appreciate your help.
Thanks again.
Sincerely yours,
Ria

Hi Ria,
Suggest you to again review CIF setting and make sure right logical system is defined :
CIF Settings in R/3 :
Check ALE settings or activate ALE settings
Define the logical system BD54
Assign logical system to a client SCC4
Set the RFC destination SM59
Assign target system and queue type CFC1
Maintain the SAP APO release NDV2
Activate BTEs for SAP APO integration BF11
User parameters for CIF CFC2
CIF Settings in APO :
Check ALE settings or activate ALE settings
Define the logical system BD54
Assign logical system to a client SCC4
Set the RFC destination SM59
Set up business system group
Create BSG /SAPAPO/C1
Assign logical systems to BSG /SAPAPO/C2
Maintain distribution definitions /SAPAPO/CP1
User parameters for CIF /SAPAPO/C4
Make sure you have right setting in SAPAPO/C4
Logging :Detail
Debug : Debugging off
Also check in SM58 for any error and SM59 for connect and check below thread
APO with Variant Configuration - Characterisitcs based SNP
Manish

How do you validate transfer of data from legacy to SAP (Tcode: SQVI)?

Hello PP members:
I would like to know how to validate transfer of data from legacy to SAP
A friend of mine was telling it has to do with <u>SAP quick viewer(SQVI)</u> but could not able to much leads on it
I would be thankful if can provide insights into the subject
Thanks for your time,
Suren R

Suren,
Yes, you could create queries in SAP with SQVI and get the data in SAP. But you need to be aware of all the relevant tables in SAP.
For information for creating queries use link:
http://help.sap.com/saphelp_47x200/helpdata/en/05/2b1df9209411d6b1d500508b6b8b11/frameset.htm
For getting the relevant tables the easiest way is :
1) Goto Se16.
2) Choose F4,
3) Click on SAP applications and drill down to the relevanttable.
Hope this is useful. If yes reward poins and close this thread.
Regards
Ram

Purchased a Bold 9900 but cannot transfer all data/files from my previos Bold 9000

Using Blackberry Desktop Software for PC, using the option of changing device, followed the software instructions and connected first the original device Bold 9000 and copied everything; this step went thru ok. Then disconnected the 9000 and connectec the 9900, copying process starts but stops suddenly indicating an error because of not having correct blackberry app software. I have not been able to move from here. Tried twice to repeat but ends up dame. Thanks for the help. I have a new phone that I have not been able to transfer any data from my previos one.

Hey kaki,
Welcome to the BlackBerry Support Community Forums.
Just to clarify are you just doing a standard backup and restore or a switch device wizard?
Also can you provide the full error message you're receiving?
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

I now know that you cannot transfer from iPad to an sd card but is there an app. Developer working on a solution

Is Apple or anyone from the community working on a way to transfer to an sd card from an iPad .
Terry

There has been no replies so I will remove the question

PC World say you cannot transfer bookmarks from an old Vista laptop to a new Windows 8.1 system.

I bought a new HP Pavilion laptop from PC World and paid to have the files tranferred from my old laptop to the new one. When I couldn't find my bookmarks they then told me they could not be transferred. Is this correct or can I still retrieve them? I still have the old laptop. I used Firefox on the old laptop as on the new with the same e-mail address and password.

Every web browser that I have ever seen has had a method for exporting bookmarks in the standard bookmarks.html format.
In Firefox - {Ctrl + Shft + B} to open the Library > Import & Backup -> Export Bookmarks to HTML
or the Backup option

Cannot transfer master data to EWM server

Hi:
I am posting this in this forum because SNC will have similar configuration where SNC can run on a different server and other SCM applications can run on the server on which live cache is there. So, if this is the case, please share your experience.
The configuration that we have in the development box is to run GATP, SPP and Livecache on one server and EWM on the other server (both are SCM servers). For the purpose of this discussion, let us call the server that is meant for SPP/GATP/Livecache the SCM Server and the one that is meant for EWM the EWM server (although both are SCM servers). The various deployment options are described in SAP Note 1606493 and this cofiguration that we have chosen is considered as the standard deployment option.
We created our first integration model and tried to CIF plants to EWM from the one ECC server and got an error "Version 000 not found". The same error was reported in the following thread (see link below). In this thread, one person suggested running the report "/SAPAPO/VERSION_CREATE_NO_APO" on the EWM server. This seems to be nothing but a backdoor to creating a version and not somehow removing the need for it.
Version 000 not found error message - /SAPAPO/LOM009
I have the following questions:
1. Do we need to install live cache instance on the EWM server also?
2. Suppose that we install the live cache instance on the EWM server. Now, one has to think about the information flow between the three system landscape. That is, EWM server does the goods receipt, etc. and this information wil go to the ECC server and from there to the SCM server. Any thoughts that you may have on this will be appreciated.
Thanks,
Satish

You'll need to push your data from your LabVIEW application to a server:
- HTTP Client VIs
- TCP/IP
- WebSockets
Server could have a LV application on it, or you could use a web server with a scripting language (e.g. PHP/ASP/Node.js).
You'll need to write something on the server to listen to your LabVIEW application and hold the data&colon;
- Database
- File
- Memory
You'll need to write some interface/API for pushing/retrieving the data - e.g. JSON/POST/XML - take a look at 'RESTful APIs'.
The choice of which of these to go for depends on how 'real-time' you are talking - how often do you want to update the data, the latency etc.
If you don't want to do all of this yourself, there are 3rd party providers that can store this sort of data for you - there's a free (but limited) one run by SparkFun - https://data.sparkfun.com/ but I'm sure there are other services.
Certified LabVIEW Architect, Certified TestStand Developer
NI Days (and A&DF): 2010, 2011, 2013, 2014
NI Week: 2012, 2014
Knowledgeable in all things Giant Tetris and WebSockets

HT1386 I bought a new computer and I cannot transfer my library to this new one. The message says that I'm not allowed to sync with two computers??? How can I delete the previous from my account???

I bought a new computer and I cannot transfer my library to this new one. The message says that I'm not allowed to sync with two computers??? How can I delete the previous one from my account???

You cannot transfer from the iPhone to the computer.
You must move the contents of your old computer to the new one directly.
Use an external hard drive perhaps or restore your old computer backup to your new computer.
The iPhone is not the source of your data, that is the computer, the iPhone is only a slave device to iTunes.

Error to transfer the data from work area to application sevrer file

Hi,
I tried to write a file in Application server.
I tried the below code
DATA: p_file type char255 VALUE '/H:usr/sap/ccms/test.txt', delimiter TYPE char255 VALUE ' '.
OPEN DATASET p_file FOR OUTPUT IN TEXT MODE encoding default.
LOOP AT itab into wa_itab.
TRANSFER wa_itab TO p_file.
ENDLOOP.
CLOSE DATASET p_file.
I am getting the below error ,
"WA_ITAB" cannot be a table, a reference, a string, or contain any of these objects.
Can anyone let me know ,what is the issue?
Reagrds,
Priya

Hi,
Well, the message is clear enough you cannot transfer a structured variable as is...
You could do something like:
       LOOP AT gt_itab ASSIGNING <rec>.
         CLEAR l_text.
         DO.
           ASSIGN COMPONENT sy-index OF STRUCTURE <rec> TO <field>.
           IF sy-subrc = 0.
             IF sy-index = 1.
               l_text = <field>.
             ELSE.
               CONCATENATE l_text l_tab <field> INTO l_text.
             ENDIF.
           ELSE.
             EXIT.
           ENDIF.
         ENDDO.
         TRY.
             TRANSFER l_text TO g_file.
           CATCH cx_sy_conversion_codepage INTO l_oref.
           CATCH cx_root INTO l_oref.                     "#EC CATCH_ALL
         ENDTRY.
       ENDLOOP.
Or, set all components of your table as CHAR.
Hope it helps,
Kr,
m.
Edited by: Manu D'Haeyer on Sep 27, 2011 12:48 PM

I mac -- how do I transfer template date and logo to the other 9 template cards. I am new to this and need step by step. I have the first template completed. Thanks

I mac -- how do I transfer template date and logo to the other 9 template cards.
I am new to this and need step by step. I have the first template completed.
Thanks

Apps and media are forever tied to the AppleID used to download them.
You cannot transfer from downloads from one AppleID to another, nor
can you merge AppleIDs. If you wish to start using your own AppleID,
you will have to redownload all the items you wish - paying again under your
AppleIDfor anything requiring payment.
Logout of iTunes under your old ID and login using the new ID.

Cannot create a date in cfformitem type="script"

I tried to create date variables using "new Date" in
cfformitem type="script" and got an error about the "new" reserver
word. Therefore, I removed the "new" and tested the script. It
worked with the wrong result because the todayDate and selectedDate
in the CheckDate2 were the same. By some reason, it ignored all the
input parameters. However, everything worked fine in the
cfsavecontent.
Anyone has idea? Thanks in advance.
Here is the script:
<cfsavecontent variable="CheckDate1">
var todayDate = new Date(myForm.todayYear,
myForm.todayMonth, myForm.todayDate, 0, 0, 0, 0);
var selectedDate = new Date(
myForm.select_date1.substr(6, 4),
myForm.select_date1.substr(0, 2) - 1,
myForm.select_date1.substr(3, 2),
0, 0, 0, 0
alert("Today's Date in the cfsavecontent:\n" + todayDate +
"\n\n" +
"Seleced Date in the cfsavecontent:\n" + selectedDate);
if (selectedDate > todayDate)
alert("You cannot select a date greater than today's date");
else
alert("You are ok.");
</cfsavecontent>
<cfform name="myForm" format="Flash">
<cfformitem type="script">
function CheckDate2():Void
var todayDate = Date(myForm.todayYear, myForm.todayMonth,
myForm.todayDate, 0, 0, 0, 0);
var selectedDate = Date(
myForm.select_date2.substr(6, 4),
myForm.select_date2.substr(0, 2) - 1,
myForm.select_date2.substr(3, 2),
0, 0, 0, 0
alert("Today's Date in the cfformitem:\n" + todayDate +
"\n\n" +
"Seleced Date in the cfformitem:\n" + selectedDate);
if (selectedDate > todayDate)
alert("You cannot select a date greater than today's date");
else
alert("You are ok.");
</cfformitem>
<CFCALENDAR name="select_date1" height="150" width="310"
onchange="#CheckDate1#">
<CFCALENDAR name="select_date2" height="150" width="310"
onchange="CheckDate2()">
<cfinput type="text" name="todayYear"
value="#DateFormat(Now(), 'yyyy')#" label="todayYear">
<cfinput type="text" name="todayMonth"
value="#DateFormat(Now(), 'm') - 1#" label="todayMonth">
<cfinput type="text" name="todayDate"
value="#DateFormat(Now(), 'd')#" label="todayDate">
</cfform>

> I am using CF 7.0.2.
Good. That's that sorted.
> The problem is the cfformitem does not allow
“new” or other reserved words
As I'm sure you're already aware, it is so by design. For
security reasons, the Coldfusion Flash form compiler does not allow
the creation of objects in an event handler. It therefore prohibits
the use of the "new" keyword in an event handler script. In fact,
It may not even allow its occurrence in a comment!
> When I put the function in a .as file and include it in the
CFM file or use
> cfsavecontent to store the as function, the CF compiler
accepts the reserved
> word “new” and the script works fine.
It's a hack, one design gremlin that got away. In programming
as in nature there are (un)lucky accidents.
> the Date constructor ignores the input parameters and
creates the
> current system date in the date objects.
We should be glad it even gets that far. Without the "new"
keyword, it should not be possible to create a new Date object. The
flash compiler encounters a familiar constructor pattern, and
simply makes do by creating the default date of today, right down
to hours, minutes and seconds. Your arguments are ignored.
Thus, the following will all return the same result, namely,
the date of today.
var todayDate = Date(myForm.todayYear, myForm.todayMonth,
myForm.todayDate, 0, 0, 0, 0);
var todayDate = Date(myForm.todayYear, myForm.todayMonth,
myForm.todayDate);
var todayDate = Date(0);
var todayDate = Date(100000000000);
var todayDate = Date();
Even then, the todayDate variable doesn't behave properly
like a Date object. For example, function calls like
todayDate.getDate() fail. Comparing dates also fails. That is
possibly because the machine cannot cast the todayDate variable.
However, here is an approach that does what you want.
<cfformitem type="script">
function CheckDate2() {
var todayDate:Date = Date();
var todayDateInMillis =
Date.UTC(myForm.todayYear,myForm.todayMonth,myForm.todayDate);
var selected_date:Date = select_date2.selectedDate;
var selected_dateInMillis = selected_date.getTime();
alert("Today's Date from cfformitem tag :\n" + todayDate +
"\n\n" + "Selected Date from cfformitem tag:\n" + selected_date);
if (selected_dateInMillis > todayDateInMillis) alert("You
cannot select a date greater than today's date");
else
alert("You are ok.");
</cfformitem>

Transfer customer specific Roles assigned to a customer from R/3 to CRM

Hello dear all,
on R/3 side there are customer specific roles defined and assigned to customers. These roles are sales area depending.
On CRM side we plant to uses the Employee Responsible relationship to build up these customer specific roles. To differentiate these roles we want to use the partner function which is assigned to the sales area.
Can anybody show me how to do the initial load of the CRM system and map the role to the Employee Responsible relationship?
I assume that I have to create a own mapping function module to realize this. Where do I register this function module so it will be used during the initial load? How do I debug these functionality?
A similar functionality we have to build up in case of the upload to the R/3 system. There we have map the Employee Responsible relationship to the specific role and assign it to the customer. Where do I register this function module?
Thanks for your help!
Best regards
Michael

hi
In order to replicate the ECC customer to CRM customer the following steps (tips) might be helpful to you:
First a Mapping structure should exist between business partners in SAP CRM and ERP ECC Customers in both the directions. In the ERP ECC system you can see this mapping using transaction /nPIDE
You should create your own account group for the data transfer from SAP CRM to ERP ECC
In SAP CRM, the roles sold-to party, ship-to party, bill-to party and payer are assigned to the classification Customer and the customer is assigned to exactly one account group in ERP ECC
For consistent distribution of Business Partners with identical numbers in both the systems, the internal number range (ex. 1-5999) should correspond to an external number assignment in the ERP ECC system or vice versa. Thus a business partner is given the same number in both systems.
For data exchange to be successful, you must ensure that the field control (mandatory fields) between the CRM system and the ERP system matches.
Besides Both SAP CRM and SAP ECC can talk to each other only when there is some settings done in the middleware. And for the CRM only a small plugin is needed for the ERP/ECC Connectivity.
Now whenever you have both the system mapped then if you create a BP in CRM it will automatically flow in the ERP System. And also the vice versa. As for the roles are concerned, the roles like ship-to-party and some few specific roles are mapped in ECC system. For a complete look at roles matching have a look at the following link.
http://help.sap.com/saphelp_crm50/helpdata/en/52/cff837a9aae651e10000009b38f8cf/frameset.htm
Once you have created a BP in CRM it will be created in some Account group in ECC. And in that AC GRP you will be not be able to create the Customer with identical ID. So if your systems are connected then even manually you also cannot create same BPs.
And for all of these the PIDE settings in ECC needs to be maintained properly.
Hope it serves your purpose
best regards
ashish

You cannot create a customer with grouping ZLES

hi friends,
I am encountered with the below message during BP creation "You cannot create a customer with grouping ZLES"
ZLES being the account group..
I ve come across the following..
I made config for BP to Customer ( auto creation)
and also BP to Vendor ( auto creation)
at a time only one of the thing is working either BP to customer or BP to vendor..
when i check the config under Number Range>Define Groupings and Assign Number ranges> in this there is a radio button Int.Std.Grping if this is marked for the grouping of Mast tenant with Cust acc then there is no error for this but error persists while creating BP to Vendor.. and if the radio button is ticked for Landlord with vendor Account then the issue comes for BP to Customer i.e the error "You cannot create a customer with grouping ZLES"
how can i tick both of them together ( if there is possiblity)
kindly help

sorry for late reply.
if ur issue isn;t solved?----
in Define Groupings and Assign Number Ranges dont select the raido button for your grouping . and next thing is while creating business partner. follow these steps...
1 bp
2 click on person, group or org as desired
3 select the role and click create. AND
4 at right hand side corner there is Grouping select the Grouping ( i was missing this step due to which i used to get the error)
hope this will solve ... also check the account groups of both BP and Customer or else there will be synchronisation error..
regards

You cannot use this product at this time. You must repair the problem by uninstalling and then reinstalling the product or contacting your IT administrator or adobe customer support for help....here I am

You cannot use this product at this time. You must repair the problem by uninstalling and then reinstalling the product or contacting your IT administrator or adobe customer support for help

This forum is none of those things. That being said, we may be able to help.
Have you tried uninstalling and reinstalling the product? If not, please consider following these instructions:
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
-Noel

I cannot utilize my Adobe documents - I get this error message - "You cannot use this product at this time. You must repair the problem by uninstalling and then reinstalling this product or contacting your IT administrator or Adobe customer support for h

I cannot utilize my Adobe documents - I get this error message - “You cannot use this product at this time. You must repair the problem by uninstalling and then reinstalling this product or contacting your IT administrator or Adobe customer support for help.”

Thank you! My solution was different. I had turned off services in MSCONFIG and did not turn them back on. After I turned services back on, Acrobat started working again without the nag error and impedance to use the program. I appreciate your input! Adobe customer service/tech support was dismally disappointing.

CVI_EI003 - No customer assigned, you cannot transfer customer data

Similar Messages

Maybe you are looking for