CVI GUI Localization Utility crashes when loading uir

I am trying to add multiple languages to my project, using the CVI GUI Localization Utility in LabWindows 2010.
However when I try to load my UIR file into the utility, it crashes (like killed to Windows). This uir was initially created using LabWindows 6 or earlier, however, it has been ported and working in LabWindows 2010 for over a year.
It crashes every time and I can't continue my work. Is there anything I can try to make it work?
Thanks,
Chris
Solved!
Go to Solution.

Hello Chris,
I remember to have read several posts about errors or crashes in the localization utility in the past but I don't remember exactly which were the conditions originating the error. If you can post here your UIR some NI person can take a look at it and find a solution for you. Additionally, some details on error messages, if any, or events posted to the system event log could help to determine the cause of error.
Alternatively, if the file includes several panels you can save each of them in a different UIR file and load them into the localization utility to reduce the number and type of controls and possibly isolate the panel originating the error.
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

Similar Messages

  • CVI 2013f1 GUI Localization Utility crashes when loading dictionary file

    Hello, all,
    I'm using the CVI localization tool localui.exe (version 13.0.0.632). After loading the uir file (uhh, quite big - 1 519 616 bytes) I try to use my small dictionary file (very small = 12 rules) - and I'm facing the unhandled exception - unknown source position, General Protection Fault at address 0x68546446 ... The similar issue comes after try of "Export All to dictionary"...
    Moreover, when I try open the uir file (succesfully) and try to quit localui.exe without any other action, the localui hangs....
    I'm using Win XP SP3.
    I'm ready to send the file(s) to some NI investigation - but don't known the appropriate address/mailbox ...
    Regards,
    George

    Hello DocRabbit,
    I have recieved your file, thank you!
    I investigated your scenario, and I have mixed results:
    I am using 64 bit Windows 7.I tried both CVI 2013 (localui.exe version 13.0.0.632), and CVI 2102 SP1 (version 12.0.1.127)
    Loading the .uir and the .lwd dictionary file that you attached works OK,
    Adding some localized text and saving works OK,
    "Export All to dictionary..." works OK,
    The tool however does hang when I try to quit.
    I did find a solution:
    My recommendation is to split the various windows in your .uir file into separate, smaller .uir files. You do have a high number of windows in a single .uir, I think this may be causing the problems.
    I started by simply deleting a few windows from the file, and all of the described problems dissapeared.
    Further, it is recommended good practice to keep all major application window in its own separate .uir file.
    If your application requires to keep everything in one .uir file, then my only other recommendation is to try using a 64-bit OS, as it seems that it is more stable this way (I am using Win7 64 bit).
    I am submitting the issue to the developers so they can investigate further, but the fix (if any) can not be expected soner than the next release of CVI, so from your perspective it makes no difference right now.
    I thank you for submitting this issue, and I apologize for any inconvenience that it may have caused.
    Please let me know if I can be of further assistance,
    Best Regards,
    T Simon
    Best Regards,
    T Simon
    National Instruments
    Applications Engineer
    Certified LabVIEW Developer - Certified TestStand Architect

  • Further GarageBand crashes when loading lessons ...

    Hi All,
    I've GarageBand installed on a Mac mini server (the new Apple ones). When I try to open any lesson it silently crashes. The
    I've seen the other thread with similar title and tried replacing the "Gill Sans.ttf" font with a "Gill Sans.dfont" from another system. Rebooted. Still crashes.
    I've fixed permissions. Still crashes.
    I tried deleting everything - everything - GarageBand related on disk and reinstalled and updated. Same problem. Crashes when loading lessons.
    The console has a whole lot of these:
    2/26/10 11:42:07 PM [0x0-0x1f01f].com.apple.garageband[2211] 2010-02-26 23:42:07.519 pkgutil[2221:903] PackageKit: * Missing bundle identifier: /Library/Receipts/Flip4Mac Web Plugins.pkg
    2/26/10 11:42:07 PM pkgutil[2221] PackageKit: * Missing bundle identifier: /Library/Receipts/php-4.3.4.pkg
    2/26/10 11:42:07 PM [0x0-0x1f01f].com.apple.garageband[2211] 2010-02-26 23:42:07.577 pkgutil[2221:903] PackageKit: * Missing bundle identifier: /Library/Receipts/php-4.3.4.pkg
    2/26/10 11:42:07 PM pkgutil[2221] PackageKit: * Missing bundle identifier: /Library/Receipts/php-5.0.3.pkg
    2/26/10 11:42:07 PM [0x0-0x1f01f].com.apple.garageband[2211] 2010-02-26 23:42:07.578 pkgutil[2221:903] PackageKit: * Missing bundle identifier: /Library/Receipts/php-5.0.3.pkg
    2/26/10 11:42:07 PM [0x0-0x1f01f].com.apple.garageband[2211] No receipt for 'com.apple.pkg.RemixTools_Instruments' found at '/'.
    which may be a result of the fact that I migrated OSX 10.5 server to OSX10.6 server.
    It also has:
    2/26/10 11:42:08 PM MIDIServer[2222] MIDIServer [2222] starting; arch=x86_64
    which seems ok.
    But crashes with this:
    2/26/10 11:42:17 PM com.apple.launchd.peruser.501[297] ([0x0-0x1f01f].com.apple.garageband[2211]) Job appears to have crashed: Bus error
    2/26/10 11:42:17 PM ReportCrash[2209] Saved crash report for GarageBand[2211] version 5.1 (398) to /Users/admin/Library/Logs/DiagnosticReports/GarageBand2010-02-26-234217server-2.crash
    I can't see anything in the crash files, except it looks like it might be trying to open a file:
    Thread 0 Crashed: Dispatch queue: com.apple.main-thread
    0 libSystem.B.dylib 0x914c6a90 strlen + 16
    1 ...ple.CoreServices.CarbonCore 0x973a636c FSMount::makepath(unsigned long, char const*, unsigned long, char*) + 140
    2 ...ple.CoreServices.CarbonCore 0x973a2621 FSMount::_getattrs(unsigned long, char const*, unsigned long, unsigned long, FSAttributeInfo*, unsigned long, unsigned char*) + 179
    3 ...ple.CoreServices.CarbonCore 0x973a2529 FSMount::getattrs(unsigned long, char const*, unsigned long, unsigned long, FSAttributeInfo*, unsigned long, unsigned char*) + 279
    4 ...ple.CoreServices.CarbonCore 0x973ecf96 FindHFSName2Retained(void*, short*, unsigned long, unsigned long, FSAttributeInfo*, char*) + 1017
    5 ...ple.CoreServices.CarbonCore 0x973ed27c PBMakeFSRefSync + 115
    6 ...ple.CoreServices.CarbonCore 0x973ed206 FSpMakeFSRef + 45
    7 com.apple.music.apps.Logic 0x00c2cb4e LgSamplerGetFileNameForKey + 147646
    8 com.apple.music.apps.Logic 0x00a1e7f6 CSetVSong::~CSetVSong() + 1146438
    9 com.apple.music.apps.Logic 0x008d280f LgDocument_MovieFullPath + 47
    10 com.apple.garageband 0x000b66dc 0x1000 + 743132
    11 com.apple.garageband 0x00272f78 0x1000 + 2563960
    12 com.apple.garageband 0x00270257 0x1000 + 2552407
    13 com.apple.garageband 0x002713a8 0x1000 + 2556840
    Any suggestions or help most appreciated.
    Cheers,
    Ashley.
    Message was edited by: Ashley Aitken

    Have you tried to delete the downloaded version from the Applications folder and to reinstall from the AppStore?  Perhaps the download was incomplete.
    If that is not the problem,  check all your Audio Units, and other plug-ins like VST plug-ins for compatibility, see:   GarageBand for Mac (v10.0): Unexpected behavior with Audio Units plug-ins

  • Logic crashes when loading preferences

    hi!
    can anyone please help? for some reason logic has started crashing when loading the preferences. i noticed for some reason it was playing through the built in audio rather than my motu interface, so i tried loading the preferences to change it and it just crashes every time. this has happened since i reinstalled logic studio 8, because it was giving me an error message on startup that caused it to crash. the error message i was getting was saying i have the wrong pro applications support installed (of which i could not alter or upgrade for some reason). so i went for a reinstall.. and now this other problem. any help would be greatly appreciated!
    i am running logic studio 8.0.2 on a powermac dual 2ghz G5
    with 3gb ram and osx 10.5.3

    Don't wipe your hard disk! (yet)
    It's probably that your preferences have become corrupted. Go to User/Library/Preferences and trash your Logic preferences (com.apple.logic.pro.cs & com.apple.logic.pro.plist).
    Reopen Logic and see what happens. The only problem is that you will lose all your keyboard commands etc., but they're a lot easier to recreate than reinstalling and authorising everything onto your hard drive.
    Also, make a copy of your preferences once you've set everything up so that if you need to trash your preferences again sometime in the future, you can just replace them with the copies you've made.
    I guess if none of this works then you may need reinstall Logic and, at worst everything else.

  • IPhoto crashes when loading

    iPhoto crashes when loading.  I am on 9.1.2 & I think this may have started after the update was applied on the 27/4 and the error message does not mean much to me
    Process:         iPhoto [1472]
    Path:            /Applications/iPhoto.app/Contents/MacOS/iPhoto
    Identifier:      com.apple.iPhoto
    Version:         9.1.2 (9.1.2)
    Build Info:      iPhotoProject-6050000~2
    Code Type:       X86 (Native)
    Parent Process:  launchd [409]
    Date/Time:       2011-05-06 13:01:43.756 +0100
    OS Version:      Mac OS X 10.6.7 (10J869)
    Report Version:  6
    Interval Since Last Report:          123013 sec
    Crashes Since Last Report:           20
    Per-App Interval Since Last Report:  10155 sec
    Per-App Crashes Since Last Report:   11
    Exception Type:  EXC_BAD_ACCESS (SIGBUS)
    Exception Codes: KERN_PROTECTION_FAILURE at 0x0000000000000000
    Crashed Thread:  37

    That's a different crash. When you re-installed, did you delete the receipts first?
    To re-install iPhoto
    1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
    2a: On 10.5:  Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
    2b: On 10.6: Those receipts may be found as follows:  In the Finder use the Go menu and select Go To Folder. In the resulting window type
    /var/db/receipts/
    A Finder Window will open at that location and you can remove the iPhoto pkg files.
    3. Re-install.
    If you purchased an iLife Disk, then iPhoto is on it.
    If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
    If you purchased it on the App Store you can find it in your Purchases List.
    Regards
    TD

  • Satellite L500-19x crashes when loading software from dvd

    Satellite L500-19x crashes when loading software from dvd. This is photoshop elements 9. Other software generally loads ok, but not always.
    Any ideas?

    Hi shownomercer,
    Have you tried the Photoshop disk in another computer to check if the installation disk is ok or not?
    What happens exactly when the computer crashes? Bluescreen?

  • VMware crashes when loading VMware Player unrecoverable error: (vmx) NOT_IMPLEMENTED d:/build/ob/bora-203739/bora/vmx/main/pollVMX.c:3981

    VMware crashes when loading VMware Player unrecoverable error: (vmx) NOT_IMPLEMENTED d:/build/ob/bora-203739/bora/vmx/main/pollVMX.c:3981

    Hi,
    Please next time do not post a full log as content of the post, instead use the browse button to attach as file.
    Also add a little bit of background information, like if you installed fresh, has it worked before, has anything changed, what is your host OS?
    The relevant part in your log appears to be:
    May 18 12:10:07.330: player-3900| Cnx_Connect: Error message: Failed to read vmware-authd port number: Cannot connect to VMX: C:\Users\Columbus\Documents\Virtual Machines\Windows XP Home Edition\Windows XP Home Edition.vmx
    May 18 12:10:07.330: player-3900|
    May 18 12:10:07.423: player| Unhandled Win32 SEH exception
    May 18 12:10:07.423: player| ----Win32 exception detected, exceptionCode 0xc0000005 (access violation)----
    Either you have some security software (firewall, antimalware, antivirus) not allowing VMware Player to connect to the vmware-authd port or your install is broken and you have to rerun the install (uninstall, reboot, install, reboot)
    Wil

  • Safari keeps crashing when loading large data on web pages

    I have owned my iPad 3 for more than a year now and I have never encountered this problem but ever since I have updated to the latest iOS version(7.1.1), my safari keeps crashing on my community site where threads have maybe over a 100 comments in them.
    Now whenever I open a thread page on Safari, it loads for a few seconds then crashes, to make things worse for me is one in a while when it crashes, it reboots my iPad. I have seen several similar questions asked by other people regarding safari crashing when loading large amounts of data and got help saying that there's something wrong with the CSS. or something but I never got any idea on how to resolve this bug.
    Can anyone tell me how do I prevent my Safari from crashing everytime I open a thread? Any solutions? Because I am getting really ******.
    (Ps: I have already tried other browsing apps such as Google Search and Chrome, they still crash. I even tried letting it load half-way and then stopping it but it isn't going well.)

    I have restored my iOS devices a number of times in order to resolve issues and it has gone very smoothly every time. I am not going to lie, it takes a fair amount of time to backup, restore the iOS and then restore from the backup, but it could very well resolve the issue.
    On the other hand, it may not help at all. Restoring the software is a standard troubleshooting measure And that is why it is recommended when other suggestions aren't working. But before you restore, there are a couple of other things that you could try,
    Reset all settings. Settings>General>Reset>Reset all Settings. You will not lose any data when you do this, but it does take some time to enter all of the device settings again, so be aware of that.
    Another thing to try is to erase the device and start over. This is different than restoring to factory settings. Reads rhis for more information.
    iOS: How to back up your data and set up your device as a new device

  • Firefox crashes when loading certain pages. ID: d9839212-23dd-4214-94a1-8a7db2100704

    Firefox crashes when loading certain pages. Often pages with video content
    == Crash ID(s) ==
    ID: d9839212-23dd-4214-94a1-8a7db2100704

    The crash reports indicates the crashes may be caused by a file named mcbrwctl.dll, that file is part of McAfee Site Advisor. Try disabling the McAfee Site Advisor to see if that stops the crashes.
    To do that, in the Tools menu select Add-ons to open the add-ons manager. Select the Extensions panel, then in the list of extensions select McAfee Site Advisor then click on the Disable button. Re-start Firefox to complete the process.
    For info McAfee Site Advisor has caused various problems with Firefox for quite a few people.

  • CVI 9.1.0 crashes when looking at variables window

    I get the following crash when I have my program at a breakpoint and I pop open the variables windows and try to scroll down to see my globals:
    EventType : BEX     P1 : cvi.exe     P2 : 9.1.0.427     P3 : 4afcd035    
    P4 : cvi.dll     P5 : 9.1.0.427     P6 : 4afcdb5b     P7 : 009d730e    
    P8 : c0000409     P9 : 00000000     
    Can anyone help with this?

    I am getting the exact same crash every time all of a sudden.  It seems to occur now that I've created a viSession variable and viFindlist variable..
    My main looks like:
    int main (int argc, char *argv[])
    int error = 0,j;
    static short addrList[31];
    static short listList[31];
    static int portList[255];
    int nPorts,index;
    char port_name[7];
    ViSession resourceManager;
    ViFindList findList;
    char desc[256];
    int numDevices;
    /* initialize and load resources */
    nullChk (InitCVIRTE (0, argv, 0));
    errChk (instHandle = LoadPanel (0, "Test Application Generator.uir", INST_SETUP));
    /* display the panel and run the user interface */
    errChk (DisplayPanel (instHandle));
    /*for (j=0;j<31;j++) {
    addrList[j] = j;
    addrList[30] = -1;
    SendIFC(0);
    FindLstn(0,addrList,listList,30);
    //Get list of available COM ports
    nPorts = LocateCom("",portList,255);
    for (index = 0; index < nPorts; index++) {
    sprintf(port_name,"COM%d",portList[index]);
    InsertListItem(instHandle,INST_SETUP_PORT_TYPE,-1,port_name,index); //Add to list
    index = viOpenDefaultRM(&resourceManager);
    viFindRsrc (resourceManager, "?*INSTR", &findList, &numDevices, desc);
    errChk (RunUserInterface ());
    Error:
    viClose(resourceManager);
    /* clean up */
    DiscardPanel (instHandle);
    //DiscardPanel (mainPanel);
    return 0;
     And I have a break on the viOpenDefaultRM function so it hasn't been ran.  And my variable looks fine except the variable resourceManager is blank.

  • Mainstage 2 crashing when loading concert made on another mac

    My Mainstage [2.2.2 on Lion] crashes when I try to load a concert created on someone else's mac. I have tried loading it several times but it crashes every time. Any ideas why this might be? I would post a crash report but it never finally crashes just endless spinning colour wheel and 'stuck' loading status bar!

    Hi thecamptain,
    If the version of the concert you´re try to load is different than yours than probably that´s the problem.
    Some missing plug-in may lead to it. Can you tell what´s the content of the concert? guitar setup, how many patchs, etc.
    You could try this:
    Export (Command + E) each patch or export the set by click on it
    Then Import (Comand + I) it to a new concert in your Mac
    Post your results
    Hope i´ve helped you
    Bruno Filipe

  • Photoshop crashes when loading a file or image

    Using Photoshop cs3 on a PC with Windows 7 installed.
    Major Problem: Photoshop gives no response when opening an image of any sort or psd file which ends out with the options to either close the program or close and find a solution online which gives no solution whatsoever.
    PScs3 was working just fine when installed but after installing an NVIDIA plug-in did it start bearing some problems. When loading png files, a window normally appears telling me that Photoshop could not parse the file. After seeing this I went to uninstall the plug-in. The problem seemed to went away but shortly after was Photoshop crashing at random, and I do mean random. Starting Photoshop at first seems to nullify the chances of crashing but after either a short period of time or a long period of time will it crash when trying to open a file. Opening multiple files at once doesn't work either but when opening only one file into PScs3 will it cooperate until opening a second. I'm not sure if the plug-in is what caused the problem but I do know everything from there seems hectic. Every crash leads me opening PScs3 again with all of its settings reset from when I first exited normally.
    Plugin Used:
    Photoshop_Plugins_8.23.1101.1715
    Appications Type; 4,317 KB
    Company - InstallShield Softwere Corporation
    Have you tried uninstalling and reinstalling the program?
    Unfortunetly yes I have attempted this and the problem still occurs towards cs3. This makes me fear that the entire program is glitched.
    Do you have any other plug-ins installed?
    I've checked and there are no other plug-ins attatched.
    This is my last option before seeing to reformat my computer. If there is any input about the topic, now is the time.

    Just a hunch: change your default printer to something else (a locally attached printer, not networked) or "PrintToPDF", then relaunch Photoshop and try again.
    It could also be a plugin (try disabling ALL third party plugins).
    And it could be a bad OS install, a virus, etc.  It may take a while to find.

  • Firefox consistently crashes when loading Flash sites

    For a couple of reasons I decided to go ahead and install OSS a few days ago.  On the first day, the install went smoothly and everything was working just as it should (I used the oss-linux-free PKGBUILD in AUR).  Yesterday and today, however, I've started to get a reoccurring problem that is, to put it lightly, driving me nuts.
    Firefox (or Epiphany, though I prefer the former) consistently crashes when opening up any site that uses Flash or Java.  With the way the internet is going, this is a large chunk of websites—not being able to visit YouTube or the website for Enemy Territory: Quake wars, for instance, is driving me nuts.
    Now, when I say "consistently" I don't mean each and every time.  I've been able to get these sites to load a number of times, but in the last two days Firefox has crashed in probably 2/3-3/4 of the time when loading any site that has a Flash element.  I've made sure that I have not wrongly assumed this has to do with my newly installed OSS by uninstalling, reinstalling the kernel and all ALSA packages, rebooting, and then surfing the web for a while to see if anything went wrong.  It didn't. 
    So my question is this: why is Firefox crashing so often in the two days since I've installed OSS?  What can be done to rectify this?
    After some experimenting, it seems the problem is worst under the following conditions:
    - Having several tabs open, though not necessarily several tabs with Flash
    - Listening to music and THEN navigating to YouTube or something.
    However, it's not specific to these circumstances.  In fact, just before I decided to make this post I opened Firefox, went to a site with Flash on it (one tab), and it immediately shut down.  I tried this three or four additional times and was met with the exact same results.
    Other info
    Firefox: Pre-compiled Mozilla i686 build, v. 2.0.0.11
    OSS: OSS (GPL version) 4.0, build 1012
    Operating System: Arch Linux 2.6.23-ARCH
    I've also posted this here.

    I have the same problem. I've never been able to identify when it started. Once firefox crashes, mpd, if it was playing, becomes unresponsive. The only way to get a flash site working again is to reboot my computer.
    I uninstalled flash: I'm not going to put up with that kind of behaviour. Now I watch youtube videos on other people's computers --you know how they say "You've GOT to see this movie!". And if I really need to see that one specific video, there's youtube-dl.
    Unfortunately gnash doesn't work on youtube for me.

  • Firefox crashes when loading Gmail, and random other pages, and freezes often.

    Firefox upgraded itself to 3.6.10 sometime last Friday, I believe, and every since I cannot get into gmail, and it freezes often. When I try to log into gmail it will crash immediately. Sometimes if I click "sign in" rather than hitting "enter" it will load, but will lock up or crash within minutes or seconds. It also will lock up if I have more than three or four tabs open, often when loading a video, and crashed while loading Nexis, which I use often for work to do research.
    I have disabled add-ons, disabled extensions, run in safe mode, uninstalled and reinstalled, rebooted, downgraded, re-upgraded. Nothing has worked.

    Problem does not seem to occur on a modern Win XP nebook with 1 gig RAM, but does on a relatively old laptop running Win 2000 with 98.5 MB ram.
    Error message states that a script is running from a Firefox directory and asks to stop it. Crash occurs anyway!

  • All video applications crash when loading a video. Including web browsers, vlc and quick time

    Last night chrome started crashing when trying to load a youtube video. I tried on safari and then downloaded firefox but they crashed too blaming flash player. Then when i tried to play a video using vlc that crashed too and so did quick time. Nothing will play in any application.   
    I've tried reinstalling the browsers, uninstalling and reinstalling flash player, repairing disk permissions, starting in safe mode and installing avast to scan for malware but none of these have made any difference. I haven't installed any updates since the last time it was working
    When verifying the disk permissions i get the following and no matter how many times i repair them it says the same thing
    OS 10.6.8
      Model Name: Mac Pro
      Model Identifier: MacPro1,1
      Processor Name: Dual-Core Intel Xeon
      Processor Speed: 2.66 GHz
      Number Of Processors: 2
      Total Number Of Cores: 4
      L2 Cache (per processor): 4 MB
      Memory: 4 GB
      Bus Speed: 1.33 GHz
      Boot ROM Version: MP11.005C.B08
      SMC Version (system): 1.7f10
      Serial Number (system): CK******Z6M
      Hardware UUID: *****
    <Edited By Host>

    Verify permissions for “HD”
    Permissions differ on "System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/zh_TW.lproj/RemoteDesktopMenu.nib" , should be drwxr-xr-x , they are -rwxr-xr-x .
    Permissions differ on "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Rem ote Desktop Message.app/Contents/Resources/zh_TW.lproj/UIAgent.nib", should be drwxr-xr-x , they are -rwxr-xr-x .
    Permissions differ on "System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreen.app/Contents/Resources/zh_TW.lproj/MainMenu.nib", should be drwxr-xr-x , they are -rwxr-xr-x .
    Permissions differ on "System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/zh_CN.lproj/RemoteDesktopMenu.nib" , should be drwxr-xr-x , they are -rwxr-xr-x .
    Permissions differ on "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Rem ote Desktop Message.app/Contents/Resources/zh_CN.lproj/UIAgent.nib", should be drwxr-xr-x , they are -rwxr-xr-x .
    Permissions differ on "System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreen.app/Contents/Resources/zh_CN.lproj/MainMenu.nib", should be drwxr-xr-x , they are -rwxr-xr-x .
    Permissions differ on "System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/ko.lproj/RemoteDesktopMenu.nib", should be drwxr-xr-x , they are -rwxr-xr-x .
    Permissions differ on "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Rem ote Desktop Message.app/Contents/Resources/ko.lproj/UIAgent.nib", should be drwxr-xr-x , they are -rwxr-xr-x .
    Permissions differ on "System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreen.app/Contents/Resources/ko.lproj/MainMenu.nib", should be drwxr-xr-x , they are -rwxr-xr-x .
    Permissions differ on "System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/Dutch.lproj/RemoteDesktopMenu.nib" , should be drwxr-xr-x , they are -rwxr-xr-x .
    Permissions differ on "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Rem ote Desktop Message.app/Contents/Resources/Dutch.lproj/UIAgent.nib", should be drwxr-xr-x , they are -rwxr-xr-x .
    Permissions differ on "System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreen.app/Contents/Resources/Dutch.lproj/MainMenu.nib", should be drwxr-xr-x , they are -rwxr-xr-x .
    Permissions differ on "System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/Italian.lproj/RemoteDesktopMenu.ni b", should be drwxr-xr-x , they are -rwxr-xr-x .
    Permissions differ on "System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreen.app/Contents/Resources/Italian.lproj/MainMenu.nib", should be drwxr-xr-x , they are -rwxr-xr-x .
    Permissions differ on "System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/Spanish.lproj/RemoteDesktopMenu.ni b", should be drwxr-xr-x , they are -rwxr-xr-x .
    Permissions differ on "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Rem ote Desktop Message.app/Contents/Resources/Spanish.lproj/UIAgent.nib", should be drwxr-xr-x , they are -rwxr-xr-x .
    Permissions differ on "System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreen.app/Contents/Resources/Spanish.lproj/MainMenu.nib", should be drwxr-xr-x , they are -rwxr-xr-x .
    Permissions differ on "System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/French.lproj/RemoteDesktopMenu.nib ", should be drwxr-xr-x , they are -rwxr-xr-x .
    Permissions differ on "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Rem ote Desktop Message.app/Contents/Resources/French.lproj/UIAgent.nib", should be drwxr-xr-x , they are -rwxr-xr-x .
    Permissions differ on "System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreen.app/Contents/Resources/French.lproj/MainMenu.nib", should be drwxr-xr-x , they are -rwxr-xr-x .
    Permissions differ on "System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/German.lproj/RemoteDesktopMenu.nib ", should be drwxr-xr-x , they are -rwxr-xr-x .
    Permissions differ on "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Rem ote Desktop Message.app/Contents/Resources/German.lproj/UIAgent.nib", should be drwxr-xr-x , they are -rwxr-xr-x .
    Permissions differ on "System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreen.app/Contents/Resources/German.lproj/MainMenu.nib", should be drwxr-xr-x , they are -rwxr-xr-x .
    Permissions differ on "System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/Japanese.lproj/RemoteDesktopMenu.n ib", should be drwxr-xr-x , they are -rwxr-xr-x .
    Permissions differ on "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Rem ote Desktop Message.app/Contents/Resources/Japanese.lproj/UIAgent.nib", should be drwxr-xr-x , they are -rwxr-xr-x .
    Permissions differ on "System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreen.app/Contents/Resources/Japanese.lproj/MainMenu.nib", should be drwxr-xr-x , they are -rwxr-xr-x .
    Group differs on "Library/Internet Plug-Ins/flashplayer.xpt", should be 80, group is 0.
    Permissions differ on "Library/Internet Plug-Ins/flashplayer.xpt", should be -rw-rw-r-- , they are -rw-r--r-- .
    Permissions differ on "System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/English.lproj/RemoteDesktopMenu.ni b", should be drwxr-xr-x , they are -rwxr-xr-x .
    Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.
    Permissions differ on "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Rem ote Desktop Message.app/Contents/Resources/English.lproj/UIAgent.nib", should be drwxr-xr-x , they are -rwxr-xr-x .
    Permissions differ on "System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreen.app/Contents/Resources/English.lproj/MainMenu.nib", should be drwxr-xr-x , they are -rwxr-xr-x .
    Permissions verification complete

Maybe you are looking for