CVI7 initial partial order is created with status SY but it is not distrib.

hi,
In CVI7 initial partial order is created with status SY but it is not distributed to recepient list attached with documnet which required to be sent,
Please any one can let me know the process flow for this,

hi,
In CVI7 initial partial order is created with status SY but it is not distributed to recepient list attached with documnet which required to be sent,
Please any one can let me know the process flow for this,
Hi guru's,
the above problem is sorted with help of workflow and basis consultant as in SWU3 RFC destination was not enabled,
as now it is enabled, workflow is getting triggered but after creating distribution package it is generating error saying no receipient found,
the mail is not reaching the SAP INBOX,
Kindly let me know whether i missing any config.

Similar Messages

  • Purchase Order created with status "Held"

    Hi Experts,
    I need your help. When SC with free text item is approved the purchase order is created in status "Held". It were previosuly created with state "Ordered" .
    How I can solve this it?
    Many Thanks.
    Regards,
    David

    Hi Muthuraman,
    The PO is not transfered to R3.
    Debugging the FM BBP_PD_PO_CREATE I have obtained the next error:
    "Error has ocurred in princing"
    MSG ID:     BBP_PD
    MSG NO:   353
    I'm in extended scenario.
    Many Thanks.
    Regards,
    David
    Edited by: David Est. on Mar 17, 2009 7:24 PM

  • IDoc created with status 03 checked via we02, but couldnt find in XI

    Hi all:
        Could you please do me a  favor?  implement a idoc to idoc issue. it has been created successfully .
    as It is found that the idoc created with status of 03 -
    data dispatched to  port ok (rather than 12 dispatch ok). however, I couldn't find  it via SXMB_MONI on XI,  there must be something wrong . coudl you please give me a hint ?
        Thank you very much!!!

    hi,
    you need to check transaction SM58 (remove the user from it) and F8
    it might be the reason that you didn't create a port in IDX1 on XI/PI
    but you will see that in SM58
    Regards,
    Michal Krawczyk

  • IDOC is created with status 51( application document not posted)

    Hi experts
    iam working on File-IDOC scenario, when i test the process the XML message is created with no errors and
    but the IDOC is created with status 51( application document not posted)
    the details error shows:
    An error occurred in CALL TRANSACTION USING or CALL DIALOG USING
    during a synchronous update.
    The error was caused by the transaction VA01.
    previously i used same test data that time it was working fine,
    please tell me how can i fix the issue.
    regards
    vasavi

    Key in your Idoc number in BD87, execute
    select the error message and then follow the menu path :
    EDIT --> restrict and process  (Select)
    In the next screen UNCHECK the Bkgd Processing and execute
    Now EDIT --> Process --> foreground from error or in foreground mode.
    This will lead you the screen where it errored out.
    Thx
    PSR

  • Help:the sales order is created with a 0 quantity

    I am able to create the sales order now. and it is showing up in SAP too.
    But i have one more problem.
    The sales order is created with a 0 quantity.
    I was passing quantity in the field COMP_QUANT of the table ORDER_ITEMS_IN.
    Can anyone help me with this, as to what field of the table ORDER_ITEMS_IN should be updated to show the quantity in the sales order
    Thanks

    This is the mistake...
    ORDER_ITEMS_IN-COMP_QUANT you populated, but you missed
    ORDER_ITEMS_INX-COMP_QUANT = 'X'.
    because of this it is not updated.
    try this..
    regards
    vijay

  • Function module to get Service Order details created with a Sales Order

    Hi,
    Could anyone tell me if there is any function module to get the details of the Service order that is created automatically for a line item in a sales order. Let me explain my requirement clearly.
    When a sales order is created with specific line item, a service order is automatically created for that line item. I need to get the information about the associated service order. I can't find this information in VBAK, VBAP or VBEP tables obviously. But, i can see the link between the service order created and related Sales document # and item #  in the DB view  CAUFV. But, the key field here is Service order #. But my requirement is to get the service order details from the key field of Sales document.
    I tested the FM SD_SALES_DOCUMENT_READ_POS that reads the sales document header and item material tables, but this doesn't help me in getting the service order details associated with the material line item.
    Your early response is greatly appreciated.
    Thanks in advance,
    venu

    Hi Akshay,
    I actually saw this , but surprisingly, there is nothing stored in this field in either of the tables VBAK or VBAP. I mean, even for the sales orders which have associated service orders, nothing is stored in either of the above tables.
    Can you please tell me if there is anyother way.
    Thank you,
    venu

  • FLVs created with ADOBE MEDIA ENCODER CS6 do not display thumbnails in ADOBE BRIDGE CS6

    Could you please attempt to shed some light on why FLVs created with ADOBE MEDIA ENCODER CS6 do not display thumbnails in ADOBE BRIDGE CS6, yet apple finder is able to display thumbnails for these same FLVs without issue?
    I'm running CS6 Production Premium with ALL updates installed on 10.6.8
    I appreciate any input and help provided the input is provided by someone who either
    A) knows the answer because they actually work for adobe
    B) actually tried this themselves before attempting to provide a solution
    If the conclusion is that it is a codec issue or a header issue with the FLVs You'd have to present a very strong case to back that claim up as it makes no sense whatsoever that CS6 is unable to generate thumbnails for media encoded using CS6, yet Apple finder can without issue. NOT to mention the FLVs in question are CREATED on the same machine with the same codecs installed that is trying to generate previews in Bridge.
    Apologies if my frustration is showing, I've gotten and seen several... incompetent replies on this forum regarding this issue and it has never been actually addressed properly as far as I can tell by Adobe support.

    We are all just incompetent users here.  As pointed out before this is just a user to user forum, Adobe rarely checks in.
    I was hoping by now you would have gotten to the bottom of this problem and were offering a solution.

  • I upgraded to yosemite and iOS 8 in order to record with quicktime. But when I select Record a new movies I immediately get an Operation Could not be completed error.

    I upgraded to yosemite and iOS 8 in order to record with quicktime. But when I select Record a new movies I immediately get an Operation Could not be completed error. When I choose record audio or screenshots, I get a little further, but as soon as I select my ipad as the source I get the same error message.

    You don't need to be a developer for this to work. I get the same error. Just one more thing on the list that make me upset more and more with Apple. Things just don't work out of the box like they used to.
    This new feature was to be included with iOS 8 and Yosemite.

  • My ipad mini is not syncing music onto in, my ipad has been replaced to see whether the issue is to do with the ipad but its still not working. i have a a windows PC please help thanks

    my ipad mini is not syncing music onto in, my ipad has been replaced to see whether the issue is to do with the ipad but its still not working.
    ive tried everything and ive been to the store which was when i was given a new ipad mini. i have a a windows PC please help thanks

    Are you attempting to sync music from your iTunes Music Library on your PC?
    What options do you have set on the Music Tab for your iPad in iTunes?
    What happens when you sync?
    Any error messages?

  • HT1386 i've already synced my itunes on my laptop with my iphone but it's not synching all of the albums/songs.  Everything was purchase through itunes so i'm not sure what the issue is.

    i've already synced my itunes on my laptop with my iphone but it's not synching all of the albums/songs.  Everything was purchase through itunes so i'm not sure what the issue is.

    What settings do you have in iTunes? Is it set to sync all music, it is set to sync only checked songs? Is there anything different about the songs that it is not syncing. Is it possible they were they purchased with a different Apple ID?

  • Hello, i use premiere pro cc and i would like to uplaod my sequence in speedgrade with direct link but it's not available. I can see the option but it's not clickable, somebody knows why ?

    Hello, i use premiere pro cc and i would like to upload my sequence in speedgrade with direct link but it's not available. I can see the option but it's not clickable, somebody knows why ?

    Oh i'm not sure they are on same, i downloaded speedgrade this morning and i didn't upgraded premiere so it's maybe this ! thanks i will try it and let you know

  • Iphone 4S - Windows Vista - 64 Bit (and photoshop elements 9.0) is not recognizing my iphone as a camera - therefore I cannot download pictures from my iphone. iTunes works fine with the iPhone, but I do not see it in "My Computer" when connected via USB

    iphone 4S - Windows Vista - 64 Bit (and photoshop elements 9.0) is not recognizing my iphone as a camera - therefore I cannot download pictures from my iphone. iTunes works fine with the iPhone, but I do not see it in "My Computer" when connected via USB.  I already tried uninstalling and reinstalling iTunes....still nothing.  Any ideas?

    Thank u verrrrrrrrrrry much FoxFifth u save my life thank u.

  • My new iPhone 4s paired with my iMac but it will not connect to transfer files by bluetooth. It says the iMac is not supported!

    My iPhone 4s will pair sucessfully with my iMac, but it will not connect so that I can transfer files via bluetooth. It says "bluetooth network not available" or "iMac not supported". Just insane. What to do now??

    I can't pair my iphone 4s with my imac.  It is very frustrating.  I can walk by anything resembling a  bluetooth and my iphone with pair...but not with my mac.  Any assistance would be appreciated.

  • Iphone says it is already synced with another library, but it's not

    My iphone says it is already synced with another library, but it's not.

    I have the exact situation and it is frustrating me. All I want is my original iTunes Library back!
    I have not synced to another computer what so ever. Does anyone know how to set my iTunes library to my original? I don't want to erase everything and start from new.
    Please let me know!

  • I am trying to connect my mac air with my tv but it is not connecting

    hi i am trying to connect my mac book air with my tv but it is not connecting . please tell me the procedure .

    Welcome to Apple Discussions
    Help us help you. The more complete the description of your problem is (what OS you're using, what Application you're using, a full or screen shot of any error messages) the more assistance we can provide, and, the sooner we can provide it..
    Are you connecting to a Cinema display or a New Television set. How are you connecting (HDMI cable, VGA cable, LAN cable, Wireless?)

Maybe you are looking for