CVP 9.0 (1) - VXML Server service is not getting started

Hi
I am installing a CVP 9.0(1) in my lab and the VXML Server service is not getting started; It throws the below error.
From CVP Error logs, I see the following the snippets.
13: 172.16.13.147: May 29 2013 11:53:55.937 -0700: %CVP_9_0_Infrastructure-0-START: No Subsystems have been started. Have you configured your server yet? ; Make sure <CVP_HOME>\conf\propFileList.properties is loading "system" and that <CVP_HOME>\conf\system.properties lists at least one subsystem to load. [id:1033]
Could somebody please suggest on how to fix it.
Thanks,
Jayaprakash

It should run in Evaluation mode
Each VXML Server requires a separate license, even if the software is installed on the same machine. The
VXML server license is tied to the IP address. If you change the IP address of the server, then you must request
for another license.
When you start VXML Server without an active license (for example, the license is missing, invalid, or
expired) it logs a message to the application server console and startup log to indicate that you need to activate
the license. However, you can still use an unlicensed installation of VXML Server with up to 30 simultaneous
sessions for evaluation purposes. To utilize more simultaneous sessions, activate a valid license of VXML
Server.
You need to look for logs here startup error (C:\Cisco\CVP\VXMLServer\logs) and the OAMP logs
Regards,
Senthil

Similar Messages

Hyperion OpenLDAP service is not getting started

Hi,
Need urgent help.
The Hyperion S9 OpenLDAP service is not getting started on windows server after unexpected restart of the server. I am getting the following error
" Windows could not start the Hyperion S9 OpenLDAP on Local Computer. For more information, review the System Event Log. If this is a non-Microsoft service, contact the service vendor, and refer to service-specific error code 21."
I have tried running the recovery exe "openLDAP\bdb\bin\db_recover.exe". But still unable to start the service.
I am using Hyperion 11.1.1.3 version.
Regards,
Sunil.

Have a read of http://john-goodwin.blogspot.co.uk/2008/08/bring-back-my-openldap.html
If you still have issues then you would need to restore from a file backup
Cheers
John
http://john-goodwin.blogspot.com/

BI Scheduler Service is not getting started

BI scheduler service is not getting started and showing this error
Could not start the oracle BI Scheduler Service on local computer.
Error 1064:An Exception occured in the service when handling the control request

Refer to Oracle Business Intelligence Infrastructure Installation and Configuration Guide.
Chapter 10 discussed configuring Oracle BI Scheduler.
The steps include:
Create a scheduler schema.
Create tables in the scheduler schema using scripts.
Updating configuration options in Job Manager.
Updating the config files: instanceconfig.xml & credentialstore.xml.
Start the Oracle BI Scheduler.
If all goes well, the BI Scheduler should start.

Oracle bi presentation service is not getting started

hi All,
for this i checked the sawkig0.log file (under OracleBIdata\web\log ) i got the following details:
Type: Information
Severity: 30
Time: Tue May 20 10:32:15 2008
File: project/sawserver/sawserver.cpp Line: 386
Properties: ThreadID-812
Location:
     saw.sawserver
     saw.sawserver.initializesawserver
     saw.threads
Oracle BI Presentation Services 10.1.3.3.3 (Build 080430.1930) are starting up.
Type: Warning
Severity: 30
Time: Tue May 20 10:32:17 2008
File: project/websubsystems/webextensionbase.cpp Line: 380
Properties: ThreadID-812
Location:
     saw.webextensionbase.init.workstationCheck
     saw.webextensionbase.init
     saw.sawserver
     saw.sawserver.initializesawserver
     saw.threads
WARNING: The Oracle BI Presentation Server is running on a workstation class machine (Windows 2000 Workstation, Windows XP Professional, etc.). Number of concurrent users may be severely limited by the operating system.
Type: Error
Severity: 42
Time: Tue May 20 10:32:18 2008
File: project/webutil/streaming.cpp Line: 72
Properties: ThreadID-812
Location:
     saw.catalog.local.loadCatalog
     saw.webextensionbase.init
     saw.sawserver
     saw.sawserver.initializesawserver
     saw.threads
Unexpected end of file encountered. 2 bytes were requested and 1 bytes were read.
Type: Error
Severity: 30
Time: Tue May 20 10:32:18 2008
File: project/webcatalog/catalogimpl.cpp Line: 1216
Properties: ThreadID-812
Location:
     saw.catalog.local.loadCatalog
     saw.webextensionbase.init
     saw.sawserver
     saw.sawserver.initializesawserver
     saw.threads
Error reading object: /system/privs/catalog/ChangePermissionsPrivilege
Unexpected end of file encountered. 2 bytes were requested and 1 bytes were read.
Type: Error
Severity: 20
Time: Tue May 20 10:32:18 2008
File: project/sawserver/winmain.cpp Line: 74
Properties: ThreadID-812
Location:
     saw.sawserver.initializesawserver
     saw.threads
Error reading object: /system/privs/catalog/ChangePermissionsPrivilege
Unexpected end of file encountered. 2 bytes were requested and 1 bytes were read.
Type: Error
Severity: 30
Time: Tue May 20 10:32:18 2008
File: project/webcomm/rpcserver.cpp Line: 145
Properties:
Location:
     saw.unknown
Assertion failure: m_pImpl != 0 at line 145 of ./project/webcomm/rpcserver.cpp
I already checked the instanceconfig.xml file and found it ok.
please help me out
thanks

I have installed Oracle BI EE on My vista Home premuim edition and have installed DB 10g . now trying to start the presentation services but getting error message..
Oracle BI Presentation Services 10.1.3.4 (Build 080726.1900) are starting up.
Type: Warning
Severity: 30
Time: Thu Apr 23 01:07:56 2009
File: project/websubsystems/webextensionbase.cpp Line: 380
Properties: ThreadID-5552
Location:
     saw.webextensionbase.init.workstationCheck
     saw.webextensionbase.init
     saw.sawserver
     saw.sawserver.initializesawserver
     saw.threads
WARNING: The Oracle BI Presentation Server is running on a workstation class machine (Windows 2000 Workstation, Windows XP Professional, etc.). Number of concurrent users may be severely limited by the operating system.
Type: Error
Severity: 10
Time: Thu Apr 23 01:08:03 2009
File: project/webcatalog/catalogimpl.cpp Line: 736
Properties: ThreadID-5552
Location:
     saw.sqlNodeCacheMgr.loadCatalog
     saw.webextensionbase.init
     saw.sawserver
     saw.sawserver.initializesawserver
     saw.threads
Invalid item \\?\C:\OracleBIData\web\catalog\samplesales\root\system\mktgcache\anuj-pc\sawguidstate.atr.
Type: Error
Severity: 10
Time: Thu Apr 23 01:08:03 2009
File: project/webcatalog/catalogimpl.cpp Line: 736
Properties: ThreadID-5552
Location:
     saw.webextensionbase.init
     saw.sawserver
     saw.sawserver.initializesawserver
     saw.threads
Invalid item \\?\C:\OracleBIData\web\catalog\samplesales\root\system\mktgcache\anuj-pc\sawguidstate.atr.
Type: Error
Severity: 10
Time: Thu Apr 23 01:08:03 2009
File: project/webcatalog/catalogimpl.cpp Line: 381
Properties: ThreadID-5552
Location:
     saw.webextensionbase.init
     saw.sawserver
     saw.sawserver.initializesawserver
     saw.threads
Invalid item /system/mktgcache/Anuj-PC/sawguidstate.
Type: Error
Severity: 20
Time: Thu Apr 23 01:08:05 2009
File: project/sawserver/winmain.cpp Line: 74
Properties: ThreadID-5552
Location:
     saw.sawserver.initializesawserver
     saw.threads
Invalid item /system/mktgcache/Anuj-PC/sawguidstate.
Type: Error
Severity: 30
Time: Thu Apr 23 01:08:05 2009
File: project/webcomm/rpcserver.cpp Line: 145
Properties:
Location:
     saw.unknown
Assertion failure: m_pImpl != 0 at line 145 of ./project/webcomm/rpcserver.cpp
Type: Information
Severity: 30
Time: Thu Apr 23 01:08:35 2009
File: project/sawserver/sawserver.cpp Line: 386
Properties: ThreadID-5848
Location:
     saw.sawserver
     saw.sawserver.initializesawserver
     saw.threads
Oracle BI Presentation Services 10.1.3.4 (Build 080726.1900) are starting up.
Type: Warning
Severity: 30
Time: Thu Apr 23 01:08:35 2009
File: project/websubsystems/webextensionbase.cpp Line: 380
Properties: ThreadID-5848
Location:
     saw.webextensionbase.init.workstationCheck
     saw.webextensionbase.init
     saw.sawserver
     saw.sawserver.initializesawserver
     saw.threads
WARNING: The Oracle BI Presentation Server is running on a workstation class machine (Windows 2000 Workstation, Windows XP Professional, etc.). Number of concurrent users may be severely limited by the operating system.
Type: Error
Severity: 10
Time: Thu Apr 23 01:08:35 2009
File: project/webcatalog/catalogimpl.cpp Line: 736
Properties: ThreadID-5848
Location:
     saw.sqlNodeCacheMgr.loadCatalog
     saw.webextensionbase.init
     saw.sawserver
     saw.sawserver.initializesawserver
     saw.threads
Invalid item \\?\C:\OracleBIData\web\catalog\samplesales\root\system\mktgcache\anuj-pc\sawguidstate.atr.
Type: Error
Severity: 10
Time: Thu Apr 23 01:08:35 2009
File: project/webcatalog/catalogimpl.cpp Line: 736
Properties: ThreadID-5848
Location:
     saw.webextensionbase.init
     saw.sawserver
     saw.sawserver.initializesawserver
     saw.threads
Invalid item \\?\C:\OracleBIData\web\catalog\samplesales\root\system\mktgcache\anuj-pc\sawguidstate.atr.
Type: Error
Severity: 10
Time: Thu Apr 23 01:08:35 2009
File: project/webcatalog/catalogimpl.cpp Line: 381
Properties: ThreadID-5848
Location:
     saw.webextensionbase.init
     saw.sawserver
     saw.sawserver.initializesawserver
     saw.threads
Invalid item /system/mktgcache/Anuj-PC/sawguidstate.
Type: Error
Severity: 20
Time: Thu Apr 23 01:08:37 2009
File: project/sawserver/winmain.cpp Line: 74
Properties: ThreadID-5848
Location:
     saw.sawserver.initializesawserver
     saw.threads
Invalid item /system/mktgcache/Anuj-PC/sawguidstate.
Type: Error
Severity: 30
Time: Thu Apr 23 01:08:37 2009
File: project/webcomm/rpcserver.cpp Line: 145
Properties:
Location:
     saw.unknown
Assertion failure: m_pImpl != 0 at line 145 of ./project/webcomm/rpcserver.cpp
---------------------------------------

CWMLS daemon manager service could not be started

Hello,
Our server in which we have installed Ciscoworks LMS was restarted due to power supply problems. After that "CiscoWorks Daemon Manager" service is not getting started. I've tried to stop all the ciscoworks related services and restart it, also tried restarting the server machine. Ciscoworks LMS Version 3.0, installed on windows 2000 SP4. The error message is:
E:>net start crmdmgtd
The CiscoWorks Daemon Manager service is starting.
The CiscoWorks Daemon Manager service could not be started.
The service did not report an error.
More help is available by typing NET HELPMSG 3534.
I've changed casuser password using resetCasuser.exe file, but there was no change.
Any clue?

Hi ,
Please attach the syslog.log ( If it is huge in size then truncate and send me some of the Lateste logs..)
--Screen shot of the services.msc winodw ( with all the cisco works service)
--Go to start >control Panel >Administrative Tools > Event Viewer > open the Application logs and send me the screen shot of the lastest event ..
In the mean time try this :
go to services.msc > change the startup type of the Daemon Manager to MAUNAL from Automatic and
ReBoot the Server ... Once server is back online > change the startup type back to Automatic and Try to Restart the Daemon Manager .
Note : Please make sure the IIS Admin service is Disable
Thanks
Afroj

Service is not getting Service ID in OSGI Bundle hence not starting ?

Hi ,
I am getting an unusual issue while deployement of service . I am using following syntax to write :
@Service(value=SomeService.class)
@Component(enabled=true,immediate = true, metatype = true, label = "Some Service")
Its not getting started and not getting service id as well.
Please help.

My OSGI-INF folder is not generating at all in the bundle.
How are you generating the bundle? maven? Is it a new one and never worked or does it stopped working suddenly?
Can you post the whole code?

CVP VXML Server Service Terminated Intermittently

Hi, all.
Recently we have implemented the ICM 7.5 with CUCM 7.1 and CVP 7.0(2). We have encountered strange problem whereby the VXML Server service in the CVP server (Call Server co-resident with VXML Server) terrminated intermittently. This problem happens even where the call volume to the hotline is low. However it happens more often when there is an influx of call volume.
Has opened a TAC case and the TAC has mentioned that it could be due to the hardware issue. We are using MCS-7845-I3-CCE1 for the CVP server. However, according to the TAC, the supported hardware based on the latest CVP BOM 7.0(2) are:
MCS-7845-I3-CCE2
MCS-7845-H2-CCE2/CCE3/CCE4
MCS-7845-I2-CCE2/CCE3/CCE4
But before implementing the system, we have gone through the CVP BOM released at that point of time and it stated that MCS-7845-I3-CCE1 was supported.
Anyone has encountered the similar problem? Is it really due to the hardware issue? Appreciate any advice and reply. Thanks in advanced.
Regards,
Eric

To add to that, ES22 for CVP7.0(2) will update JRE shipped with CVP to JRE 1.5 update 19 to avoid JRE crashes.
Thanks,
Hitesh Patel

VXML Server Service Terminates unexpectedly

I'm having an issue with a CVP 7.02 install where the VXML server service keeps terminating on its own. The Event Viewer on the server simply states the VXML Server service has terminated unexpectedly and this has happened nn times. I have looked at all the logs I know of (..\Tomcat\logs, \Cisco\CVP\logs, \Cisco\CVP\VXMLServer\logs, and the app log paths themselves) but there is no indication of what is going on to cause the service to crash. The intrestiong thing is somtimes it crashs even when no calls are going through the system so I doubt that it is load related.
I do have a TAC case open on this, but i am just curious to see if anyone else has run into this before.

I have a similar solution for the Java Options.
This problem has come up for us recently on a different set of servers.
We are migrating a customer's CVP from CVP4 to CVP7 using tech refresh - so new servers - and the VXML Server (as a service) always crashes after 46 mins on both boxes. We have other CVP7s installed with no issues on similar hardware.
When it runs from a command window as I described above, stays up forever.
We have ES22 installed (that updates the JRE and fixes a stability problem with the service - similar to the JRE post I made above).
In the course of TAC trying to figure out the problem, they asked me to change the JRE options in the registry, so that if when the probelm reoccurred we would get a heapdump file in the HeapDumpPath location.
HKEY_LOCAL_MACHINE\SOFTWARE\Apache Software Foundation\Procrun 2.0\VXMLServer\Parameters\Java\Options
-XX:+HeapDumpOnOutOfMemoryError
-XX:HeapDumpPath=C:\Cisco\CVP\VXMLServer\logs
Once this was done, it simply would not crash. If I take this out, it will only last 46 mins.
It writes the hs_err_pidXXXX.log files in WINDOWS\system32 and they say
# EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x002d002d, pid=8052, tid=7436
Current thread (0x4a2cf560): JavaThread "Cisco Unified CVP VXML Server: Administration Connector" daemon
They always say the current thread is in the Admin Connector daemon, which agrees with the fact that it runs fine from the cmd line, but not as a service. The DE has no clue as to what's wrong and says something may have been corrupted during the install. I have a hard time believing this, as the problem is exactly the same on both machines.
Isn't it amazing that the change to the Java Options makes it stay up.
Regards,
Geoff

TF400893: Team Foundation Server services are not available.

Hi Gang
Am getting
TF400893: Team Foundation Server services are not available. This is most likely caused by a network error. Please check your connection and try again.
consistently when trying to access TFS2012 Web Access. I'm on the same domain as the server and able to login however as soon as I try and access a query it asks me to log in again and then presents me with the above message.
Any thoughts am trying to get as many ports open as possible however security's pretty tight here.
Regards

Hi,
Thanks for your feedback!
I recommend you install TFS Power Tools and run a Team Foundation Server Complete Health Check and see if it helps.
TFS 2012 Power Tools download address:http://visualstudiogallery.msdn.microsoft.com/b1ef7eb2-e084-4cb8-9bc7-06c3bad9148f
Hope it helps!
Best Regards,
Cathy Kong
MSDN Community Support | Feedback to us
Develop and promote your apps in Windows Store
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

The report server service is not running on Reporting Service Point server

Hi,
I have encountered a problem, my reporting service point has stopped working. (SCCM 2012 R2)
In srsrp.log:
Check state SMS_SRS_REPORTING_POINT
12/15/2014 5:48:54 AM 3152 (0x0C50)
Check server health. SMS_SRS_REPORTING_POINT
12/15/2014 5:48:54 AM 3152 (0x0C50)
Successfully created srsserver SMS_SRS_REPORTING_POINT
12/15/2014 5:48:54 AM 3152 (0x0C50)
Reporting Services URL from Registry [https://s-hub-sql1.domain.local/ReportServer/ReportService2005.asmx]
SMS_SRS_REPORTING_POINT 12/15/2014 5:48:54 AM
3152 (0x0C50)
The request failed with HTTP status 404: Not Found.
SMS_SRS_REPORTING_POINT 12/15/2014 5:48:54 AM
3152 (0x0C50)
(!) SRS not detected as running SMS_SRS_REPORTING_POINT
12/15/2014 5:48:54 AM 3152 (0x0C50)
Failures reported during periodic health check by the SRS Server S-HUB-SQL1.domain.local.
SMS_SRS_REPORTING_POINT 12/15/2014 5:48:54 AM
3152 (0x0C50)
Registry change SMS_SRS_REPORTING_POINT
12/15/2014 5:48:54 AM 3152 (0x0C50)
Waiting for changes for 1 minutes SMS_SRS_REPORTING_POINT
12/15/2014 5:48:54 AM 3152 (0x0C50)
Timed Out... SMS_SRS_REPORTING_POINT
12/15/2014 5:49:54 AM 3152 (0x0C50)
Set configuration SMS_SRS_REPORTING_POINT
12/15/2014 5:49:54 AM 3152 (0x0C50)
In windows event log:
On 12/15/2014 6:39:28 PM, component SMS_SRS_REPORTING_POINT on computer S-HUB-SQL1 reported: The report server service is not running on Reporting Service Point server "S-HUB-SQL1"; start the service to enable reporting.
In configuration manager service manager, the service sms_srs_reporting_point is running.
In Reporting services configuration manager, the service is running.
If I restart the reporting service, it doesn't helps.
What is not properly?

I've already found the reason why all stopped working - someone deleted the report manager URL HTTPS bindings (in Report services configuration manager). Added it back, than reporting started to work. Awww!

SQL Server Service is not reflecting to the new name.

Hi,
I just rename the computer and use the command below to rename the SQL Server but the SQL Server Service is not reflecting to the new name.
Is there a way to change the SQL Server Service and agent to reflect the new name or do I have to re-install sql server.
I am using SQL 2008 R2.
Thank you in advance.

If running "SELECT
@@servername" yields the old server name, it means the instance has not been renamed.
you must run statement to drop the old name of the instance and recreate it with the new name as the default (local) one..
EXEC master.dbo.sp_dropserver 'MACHINENAME\OLDINSTANCENAME'
go
EXEC master.dbo.sp_addserver 'MACHINENAME\newINSTANCENAME', 'local'
go
I took the code here:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/c07ab906-dabf-4303-9737-d430d82c4f42/how-to-rename-instance-of-sql-server-2008-r2?forum=sqltools
Once you did this, look at your maintenance plans. I sometime end up having one or two still following the old name. Especially if you create this new server from a copy of another virtualized one.

Trex6.1 http server service is not running

Hi all,
We installed SR1 with Trex.it worked fine.After that we upgrade to stack11.then Trex http server service is not working.We checked with TrexAdmin.py admin tool it showing red status.We tried all the options which was given in the Q&A of SDN forum.still no luck .we unistalled and installed again ,even though it is not working.any one can help to resolve this issue.
Thanks and Regards
Gopal

Hi Nicholas
In the TREX admin view the HttpService is RED
I could not find any file by the name TREXHttpserver.ini
but i only found a file by the name TREXWebserver.ini. Is it the same ??
This is the content of the TREXWebserver.ini
[trace]
saptracelevel= 1
filename=trace/TrexWebServer
maxfilesize= 10000000
maxfiles= 10
default=error
WebServer=error
IdxProv=error
alertwriter= SimpleAlertWriter
alert= error
alertfilename= trace/TrexWebServerAlert
[HTTPSERVER]
URL=http://ind50038436:30205/TREXHttpServer/TREXISAPIExt.dll
certfile=
[global]
bDoNotConvert2IPN= yes
[ccms]
record= on
satracer=D:usrsaptrex_02/JarmLike
[satjarmlike]
file= trace/TrexWebServer.sat
# this section is only used in Apache web server module mod_trexhttp.so
[apache]
chunked=yes
onelog=yes
This is the content of the TREXNameServer.ini
[communication]
listenport=30201
maxchannels= 200
maxendpoints= 200
[trace]
filename= trace/TrexNameServer
saptracelevel=0
default= error
maxfilesize= 10000000
maxfiles= 10
performancetrace= off
alertwriter= SimpleAlertWriter
alert= error
alertfilename= trace/TrexNameServerAlert
nameserver= error
replication= error
tns_timing= error
assignment= error
[ccms]
record= on
satracer= JarmLike
[satjarmlike]
file= trace/TrexNameServer.sat
[pythontrace]
trace= off
tracefile= trace/tns_client
log_all=
[service]
workerthreads_0= 10
workerthreads_1= 1
printmethods= on
There is no trace file for HTTP service. There are only trace files for other services e.g. Nameserver, Indexserver etc...
Thanks in advance,

CF8 Application Server Service Will NOT Start

I ran into this error:
java.lang.OutOfMemoryError: Java heap space
and after researching it it seemed that I should up the max heap size on the Java/JVM page, so I increased my max heap size to 1044MB from 512, via the CF Administrator, I also added maxPermSize= 256m. Then I restarted the server, but the Application Server service will not start.
I opened home/runtim/bin/jvm.config and set the heap size to 1024, restart, service still wont start.
Set the max heap size to 512 and removed maxPermSize, restarted server, service still won't start.
Set the entire java.args equal to: -server -Xmx256m -Dsun.io.useCanonCaches=false -xx:MaxPermsize=128m -XX:+UseParallelGC -Dcoldfusion.rootDir={application.home}/../ -Dcoldfusion.libPath={application.home}/../lib -Dcoldfusion.classPath={application.home}/../lib/updates,{application.home}/../lib,{appli cation.home}/../gateway/lib/,{application.home}/../wwwroot/WEB-INF/flex/jars,{application. home}/../wwwroot/WEB-INF/cfform/jars
Restarted, still the services will not start.
Does anyone have any ideas?
The error I get when trying to start the services is:
Windows could not start the ColdFusion 8 Application Server on Local Computer. For more information, review the System Even Log. If this is a non-Microsoft service, contact the service vendor, and refore to service-specific error code 2.
Thanks!

Once you have ColdFusion running again this will bring you back to your initial problem:
java.lang.OutOfMemoryError: Java heap space
Suggest take a copy of your working JVM.CONFIG (so you have a backup) then add some debugging to the JVM Arguments eg:
# Arguments to VM
java.args=-server -Xmx512m -Dsun.io.useCanonCaches=false -XX:MaxPermSize=192m -XX:+UseParallelGC -XX:+PrintGCDetails -XX:+PrintGCTimeStamps -XX:+PrintHeapAtGC -verbose:gc -Xloggc:cfjvmGC.log -Dcoldfusion.rootDir={application.home}/../ -Dcoldfusion.libPath={application.home}/../lib -Dcoldfusion.classPath={application.home}/../lib/updates,{application.home}/../lib,{appli cation.home}/../gateway/lib/,{application.home}/../wwwroot/WEB-INF/flex/jars,{application. home}/../wwwroot/WEB-INF/cfform/jars
Once ColdFusion is restarted again a log file will be created called \ColdFusion8\runtime\bin\cfjvmgc.log. Open the log file and you will be able to see how the New, Tenure and Permanent memory spaces are working. Given you now know which buffer is filling (excluding New made up of Eden and a couple Survivor spaces - because those fill and empty all the time) you can make adjustments to JVM.CONFIG knowing which value you intend to alter. Likely you want to alter either Xmx or MaxPermSize. When you think the Java heap space is resolved turn logging off by removing the bolded details.
HTH, Carl.

EPMA server service is not starting

Hi All,
I'm unable to open dimension library,calc manager because EPMA server service is not starting.When trying to start the service EPMA Administration Server Service I'm getting the following error-"The Hyperion EPMA Server service on Local Computer started and then stopped.Some services stop automatically if they are not in use by other services or programs"
And while opening the Dimension library in EPMA I'm getting the following error-"No connection could be made because the target machine actively refused it 127.0.0.1:5251
Code:
com.hyperion.awb.web.common.DimensionServiceException
Description:An error occured processing the results from the server.
Actor:none
Kindly ley me know what could be the issue and how I can resolve it.
Thanks

Hi,
When you try to start the service, you will get this error.
So, please look into the Windows Event viewer for the Error meassage.
You can look into the DimensionServer.log and DimensionServer-err.log file for the error msg which vivek suggested you.
path for error logs: C:\Oracle\Middleware\user_projects\epmsystem1\diagnostics\logs\epma
Regards,
mady

Server not getting started!!!

Hi All,
We have written a server which acts as a service in Microsoft Windows 2000 in java. For that we also wrote a monitor which keeps connecting to server and tries to restart the service through net stat startserver command if the server stops. This entire process works fine on Windows XP but the monitor is not getting started on Windows 2000. It attempts to execute a Batch FIle with some parameters to start the monitor. Is there any bug in windows 2000 and with java which is not letting my monitor to start ? Anyone please advice me......

Did you try looking with the event viewer if there's a message that says why your service wasn't started?
Under what account are you starting the service? Does that account have access to the files and directories that the service needs? It might be a problem of access rights.
Problems like this are almost always the user's fault and not a bug in the operating system, but people always start with assuming that they're doing everything right so that it must be a bug....

CVP 9.0 (1) - VXML Server service is not getting started

Similar Messages

Maybe you are looking for