CVP and configuration migration

Hello All;
With Refresh Technology, the CVP configuration (that will be done using the Ops Console): It can be migrated from the production to the new environment or should be done manual?
VXML Server configuration to be done from the Ops Consol, or any thing also need to be done at the VXML Server it self?
Thanks in advance for all who is going to help.
Regards
Bilal

********** CVP Voice Browser Configuration Utility ************
>>>>
showall
-------CLI: Voice Browser Active Call Statistics -------
Local ID  Creation Time    State          Duration  DNIS        ANI
        Last Call Server                        Last Media Server         Unique
Call ID
                                                               No Calls
-------CLI: Voice Browser Total Statistics -------
  Since Startup:
      Total Calls:                           16
        Disconnect Disposition:
          Redirected:                        0
          Caller Hangup:                     0
          Called Party Hangup:               0
          ICM Release:                       16
          Critical Media:                    0
      Max Simultaneous Calls:                2
      Max IVR Ports:                         1
      Total prompts not found:               0
      Total transfers not completed:         16
         Busy:                               0
         Ring-no-answer:                     0
         Gatekeeper problem:                 14
         Destination problem:                2
         Other:                              0
      System Startup Time:                   Mar 15 2011, 16:53:57
      System UpTime:                         1 Days, 07 Hours, 40 Minutes, 56 Se
conds
      Current State:                         In Service
      Packets Transmitted(approx):           0.
-------CLI: Voice Browser Snapshot Statistics -------
  Snapshot Statistics:
      Calls In Progress:                     0
      Calls Waiting for VXML:                0
      Calls Playing Prompts:                 0
      IVR Ports in use:                      0
      Calls Waiting for DTMF:                0
      Calls Transferring:                    0
      Calls Transferred:                     0
      Calls Disconnecting:                   0
      Calls Disconnected:                    0
      New calls:                             0
      Other:                                 0
      Internal Call count:                   0
      System memory in use (percent):        26
-------CLI: Voice Browser Last Interval Statistics -------
Calls:
  Interval Statistics:
      Interval size:                         1800
      New calls this interval:               1
      Max call arrival per second:           0.2
      Calls transferred this interval:       0
      Max IP Transfer per second:            0.
      Calls redirected this interval:        0
      Transfers not completed this interval: 1
      Prompts not found this interval:       0
      Calls using critical media:            0
      Calls finished this interval:          1
      Avg New Call Latency (ms):             172
      Max New Call Latency (ms):             172
      Min New Call Latency (ms):             172
      Std Dev. New Call Latency:             Not enough data points
      Avg CPU Usage (percent):               4
      Max CPU Usage (percent):               15
      Min CPU Usage (percent):               0
      Std Dev. CPU Usage(theta):             6
  -Call Server: localhost:8000
      Avg Call Event Latency (ms):           16
      Max Call Event Latency (ms):           16
      Min Call Event Latency (ms):           16
      Standard Deviation(theta):             Not enough data points
      Number of Call Events:                 1
  -Call Server: 10.180.22.137:8000
      Avg Call Event Latency (ms):           0
      Max Call Event Latency (ms):           0
      Min Call Event Latency (ms):           0
      Standard Deviation(theta):             0
      Number of Call Events:                 2
The list of Call Servers is "localhost:8000/cvp/VBServlet "
The Call Server timeout is 7 seconds
The Call Servers Num. Tries is 3
The Media Server timeout is 10 seconds
The Media Server Num. Tries is 2
The Default Connection timeout is 3 seconds
The Media Server Connection timeout is 1 seconds
The Call Server connection timeout is 2 seconds
The Called Party hangup timeout is 2 seconds
The list of gatekeepers is "10.180.22.102"
The maximum number of total calls is 555
The H323 ID is "VIVADRCVP"
This command is obsolete. Use setGK instead
The Tech Prefix is "2#"
The maximum number of IVR ports is 100
The takeback percentage value is 0
The RAI Max Threshold is 90
The RAI Min Threshold is 80
The Trace Mask is 101083
The Security Mask is 1
Metrics are being logged to the console and EMS files
The Message Meter Interval is 1800 seconds.
Call Details are being logged to the console and EMS files
Interface Traces are not being logged to the console and EMS files
H323 Traces are not being logged to the console and EMS files
Transfer label is not currectly set.
The Voice Browser is in service
NewCallOnly is off
The Codec is "g711Ulaw64k"
Voice Browser is passing DNIS in IP Transfer ARQ
The Voice Browser restart timer is 1800 seconds
The takeback delay (per comma in the transfer label) is 100 milliseconds.
The number of digits that will be stripped from the right of the CLI when presen
tationIndicator is restricted is 30.
CPU and Memory utilization checking is on
The Node Manager restart timer is 1800 seconds
The Ring-no-answer timeout is 15 seconds.
Voice Browser is passing CLI as Calling Party Number in IP Transfer Setup
ISNtoISN is off
LocationsBasedCAC is off
The value of SigDigits is 0
There are currently no alarms.
Release 7.0.1, Build 1190
Removal(stripping) of Tech Prefix by Voice Browser is on
Passing Calling Party Presentation Indicator to outbound call leg is on.
There are no Exclude IP addresses currently set.
There are no Survey DNIS values currectly set.
The value of DiscCauseCode is 34
MediaWaitForConnect is off
The value of RfNumber is 88
>>>>
show all
Command not found: show
>>>>showall
-------CLI: Voice Browser Active Call Statistics -------
Local ID  Creation Time    State          Duration  DNIS        ANI
        Last Call Server                        Last Media Server         Unique
Call ID
                                                               No Calls
-------CLI: Voice Browser Total Statistics -------
  Since Startup:
      Total Calls:                           16
        Disconnect Disposition:
          Redirected:                        0
          Caller Hangup:                     0
          Called Party Hangup:               0
          ICM Release:                       16
          Critical Media:                    0
      Max Simultaneous Calls:                2
      Max IVR Ports:                         1
      Total prompts not found:               0
      Total transfers not completed:         16
         Busy:                               0
         Ring-no-answer:                     0
         Gatekeeper problem:                 14
         Destination problem:                2
         Other:                              0
      System Startup Time:                   Mar 15 2011, 16:53:57
      System UpTime:                         1 Days, 07 Hours, 41 Minutes, 29 Se
conds
      Current State:                         In Service
      Packets Transmitted(approx):           0.
-------CLI: Voice Browser Snapshot Statistics -------
  Snapshot Statistics:
      Calls In Progress:                     0
      Calls Waiting for VXML:                0
      Calls Playing Prompts:                 0
      IVR Ports in use:                      0
      Calls Waiting for DTMF:                0
      Calls Transferring:                    0
      Calls Transferred:                     0
      Calls Disconnecting:                   0
      Calls Disconnected:                    0
      New calls:                             0
      Other:                                 0
      Internal Call count:                   0
      System memory in use (percent):        26
-------CLI: Voice Browser Last Interval Statistics -------
Calls:
  Interval Statistics:
      Interval size:                         1800
      New calls this interval:               1
      Max call arrival per second:           0.2
      Calls transferred this interval:       0
      Max IP Transfer per second:            0.
      Calls redirected this interval:        0
      Transfers not completed this interval: 1
      Prompts not found this interval:       0
      Calls using critical media:            0
      Calls finished this interval:          1
      Avg New Call Latency (ms):             172
      Max New Call Latency (ms):             172
      Min New Call Latency (ms):             172
      Std Dev. New Call Latency:             Not enough data points
      Avg CPU Usage (percent):               4
      Max CPU Usage (percent):               15
      Min CPU Usage (percent):               0
      Std Dev. CPU Usage(theta):             6
  -Call Server: localhost:8000
      Avg Call Event Latency (ms):           16
      Max Call Event Latency (ms):           16
      Min Call Event Latency (ms):           16
      Standard Deviation(theta):             Not enough data points
      Number of Call Events:                 1
  -Call Server: 10.180.22.137:8000
      Avg Call Event Latency (ms):           0
      Max Call Event Latency (ms):           0
      Min Call Event Latency (ms):           0
      Standard Deviation(theta):             0
      Number of Call Events:                 2
The list of Call Servers is "localhost:8000/cvp/VBServlet "
The Call Server timeout is 7 seconds
The Call Servers Num. Tries is 3
The Media Server timeout is 10 seconds
The Media Server Num. Tries is 2
The Default Connection timeout is 3 seconds
The Media Server Connection timeout is 1 seconds
The Call Server connection timeout is 2 seconds
The Called Party hangup timeout is 2 seconds
The list of gatekeepers is "10.180.22.102"
The maximum number of total calls is 555
The H323 ID is "VIVADRCVP"
This command is obsolete. Use setGK instead
The Tech Prefix is "2#"
The maximum number of IVR ports is 100
The takeback percentage value is 0
The RAI Max Threshold is 90
The RAI Min Threshold is 80
The Trace Mask is 101083
The Security Mask is 1
Metrics are being logged to the console and EMS files
The Message Meter Interval is 1800 seconds.
Call Details are being logged to the console and EMS files
Interface Traces are not being logged to the console and EMS files
H323 Traces are not being logged to the console and EMS files
Transfer label is not currectly set.
The Voice Browser is in service
NewCallOnly is off
The Codec is "g711Ulaw64k"
Voice Browser is passing DNIS in IP Transfer ARQ
The Voice Browser restart timer is 1800 seconds
The takeback delay (per comma in the transfer label) is 100 milliseconds.
The number of digits that will be stripped from the right of the CLI when presen
tationIndicator is restricted is 30.
CPU and Memory utilization checking is on
The Node Manager restart timer is 1800 seconds
The Ring-no-answer timeout is 15 seconds.
Voice Browser is passing CLI as Calling Party Number in IP Transfer Setup
ISNtoISN is off
LocationsBasedCAC is off
The value of SigDigits is 0
There are currently no alarms.
Release 7.0.1, Build 1190
Removal(stripping) of Tech Prefix by Voice Browser is on
Passing Calling Party Presentation Indicator to outbound call leg is on.
There are no Exclude IP addresses currently set.
There are no Survey DNIS values currectly set.
The value of DiscCauseCode is 34
MediaWaitForConnect is off
The value of RfNumber is 88
>>>>

Similar Messages

  • How to migrate SharePoint 2013 Content and Configuration DataBases to a new SQL Server and DataBases in it?

    Hi,
    We need to migrate Our current 1 clustered SQL Server, Many Configurations DataBases and Many Content DataBases to a brand new clustered SQL server and brand new databases in it.
    How can I do this?
    Can someone list the steps involved?
    Thanks.  

    Hi,
    According to your description, you want to move Content databases  and Configuration databases to a new SQL Server,  refer to this article:
    https://technet.microsoft.com/en-us/library/cc512725.aspx?f=255&MSPPError=-2147217396
    Besides, here is a similar post, you can use as a reference:
    https://social.technet.microsoft.com/Forums/office/en-US/2cd46f7a-d583-41b2-82c2-ddc6d7c43fb8/how-to-move-sharepoint-databases-to-new-sql-server?forum=sharepointadminprevious
    Best Regards,
    Lisa Chen
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • Migration of files,programs and configuration settings from Powerbook G4

    How does one move files, programs and configuration settings from a G4 Powerbook running OSX 10.4.11 to a late 2008 unibody Macbook since there is no firewire capability to use for a target disk.

    If you previously created an user account on the MacBook, open the Users folder, find the folder you migrated, drag it to the desktop, authenticate yourself if needed, and then move the files from the folder on the desktop to the corresponding locations in your home folder.
    (30421)

  • Installing CF10, in Configuration and Settings Migration Wizard - getting error: Invalid Password

    Installing CF10, in Configuration and Settings Migration Wizard, in browserhttp://127.0.0.1/CFIDE/administrator/enter.cfm,
    ColdFusion has been successfully installed. This wizard will guide you through the remaining server configuration steps and, if applicable, migrate settings from a previous version of ColdFusion.
    To guarantee the security of your server, please enter your ColdFusion Administrator password.
    - getting error: Invalid Password. It won't take the password I provided in previous "Set Admin password" screen. Help?

    Hi,
    I am having the issue with the URL on the Configuration ans Setting Migration Wizard pointing to the following URL:
    http://localhost/CFIDE/administrator/enter.cfm
    Receiving a message:
    HTTP Error 404.0 - Not Found
    The resource you are looking for has been removed, had its name changed, or is temporarily unavailable.
    The following is the information in the error page:
    Module
    IIS Web Core
    Notification
    MapRequestHandler
    Handler
    ISAPI-dll
    Error Code
    0x80070002
    Requested URL
    http://localhost:80/jakarta/isapi_redirect.dll
    Physical Path
    D:\ColdFusion10\cfusion\wwwroot\jakarta\isapi_redirect.dll
    Logon Method
    Anonymous
    Logon User
    Anonymous
    I could not find a directory called jakarta.
    Any ideas?
    Thanks,
    Mike

  • How to add and configure an additional hard drive.

    I will like to know how to install and configure an additional hard drive. I will like to know how to configure the server so the services will start using this additional space. Intel based Xserver. late 2009.
    Erik.

    Your question is a little vague... "services will start using this additional space..."?
    Let's see, where to start.
    You don't say how many drives you currently have in your server. If all three drive bays are used then you'll probably need some kind of external array. There are many to choose from.
    If you have a spare bay (or two) then you can buy a new drive bay (ADM - Apple Drive Module) (several online vendors still sell them), but you can't just put a bare drive into an empty bay since the blank trays lack the electrical connectors to support a drive.
    Once you work out your drive options (internal vs. external, capacity, etc.) you can work out a plan to use them.
    The specifics of that will depend on what services you're using. Are you web serving? file serving? home directory serving? or maybe mail? database? something else.
    In general, once a drive is attached and initialized (via Disk Utility.app) it's up to you to configure the individual server components to use the space. That typically involves changing some kind of configuration parameter (e.g. httpd.conf for apache, /etc/my.cnf for MySQL, or various options in Server.app for other services) to tell them to use the new volume.
    If you want to migrate the entire server to the new drive (e.g. the new drive is larger/faster) then you can clone your existing OS drive to the new drive and just reboot.
    So, you see, there are many ways to do this. Everyone's situation will be a little different.

  • When setting up converged network in VMM cluster and live migration virtual nics not working

    Hello Everyone,
    I am having issues setting up converged network in VMM.  I have been working with MS engineers to no avail.  I am very surprised with the expertise of the MS engineers.  They had no idea what a converged network even was.  I had way more
    experience then these guys and they said there was no escalation track so I am posting here in hopes of getting some assistance.
    Everyone including our consultants says my setup is correct. 
    What I want to do:
    I have servers with 5 nics and want to use 3 of the nics for a team and then configure cluster, live migration and host management as virtual network adapters.  I have created all my logical networks, port profile with the uplink defined as team and
    networks selected.  Created logical switch and associated portprofle.  When I deploy logical switch and create virtual network adapters the logical switch works for VMs and my management nic works as well.  Problem is that the cluster and live
    migration virtual nics do not work.  The correct Vlans get pulled in for the corresponding networks and If I run get-vmnetworkadaptervlan it shows cluster and live migration in vlans 14 and 15 which is correct.  However nics do not work at all.
    I finally decided to do this via the host in powershell and everything works fine which means this is definitely an issue with VMM.  I then imported host into VMM again but now I cannot use any of the objects I created and VMM and have to use standard
    switch.
    I am really losing faith in VMM fast. 
    Hosts are 2012 R2 and VMM is 2012 R2 all fresh builds with latest drivers
    Thanks

    Have you checked our whitepaper http://gallery.technet.microsoft.com/Hybrid-Cloud-with-NVGRE-aa6e1e9a for how to configure this through VMM?
    Are you using static IP address assignment for those vNICs?
    Are you sure your are teaming the correct physical adapters where the VLANs are trunked through the connected ports?
    Note; if you create the teaming configuration outside of VMM, and then import the hosts to VMM, then VMM will not recognize the configuration. 
    The details should be all in this whitepaper.
    -kn
    Kristian (Virtualization and some coffee: http://kristiannese.blogspot.com )

  • CONCURRENT MANAGER SETUP AND CONFIGURATION REQUIREMENTS IN AN 11I RAC ENVIR

    제품 : AOL
    작성날짜 : 2004-05-13
    PURPOSE
    RAC-PCP 구성에 대한 Setup 사항을 기술한 문서입니다.
    PCP 구현은 CM의 workload 분산, Failover등을 목적으로 합니다.
    Explanation
    Failure sceniro 는 다음 3가지로 구분해 볼수 있습니다.
    1. The database instance that supports the CP, Applications, and Middle-Tier
    processes such as Forms, or iAS can fail.
    2. The Database node server that supports the CP, Applications, and Middle-
    Tier processes such as Forms, or iAS can fail.
    3. The Applications/Middle-Tier server that supports the CP (and Applications)
    base can fail.
    아래부분은 CM,AP 구성과
    CM과 GSM(Global Service Management)과의 관계를 설명하고 있습니다.
    The concurrent processing tier can reside on either the Applications, Middle-
    Tier, or Database Tier nodes. In a single tier configuration, non PCP
    environment, a node failure will impact Concurrent Processing operations do to
    any of these failure conditions. In a multi-node configuration the impact of
    any these types of failures will be dependent upon what type of failure is
    experienced, and how concurrent processing is distributed among the nodes in
    the configuration. Parallel Concurrent Processing provides seamless failover
    for a Concurrent Processing environment in the event that any of these types of
    failures takes place.
    In an Applications environment where the database tier utilizes Listener (
    server) load balancing is implemented, and in a non-load balanced environment,
    there are changes that must be made to the default configuration generated by
    Autoconfig so that CP initialization, processing, and PCP functionality are
    initiated properly on their respective/assigned nodes. These changes are
    described in the next section - Concurrent Manager Setup and Configuration
    Requirements in an 11i RAC Environment.
    The current Concurrent Processing architecture with Global Service Management
    consists of the following processes and communication model, where each process
    is responsible for performing a specific set of routines and communicating with
    parent and dependent processes.
    아래 내용은 PCP환경에서 ICM, FNDSM, IM, Standard Manager의 역활을 설명하고
    있습니다.
    Internal Concurrent Manager (FNDLIBR process) - Communicates with the Service
    Manager.
    The Internal Concurrent Manager (ICM) starts, sets the number of active
    processes, monitors, and terminates all other concurrent processes through
    requests made to the Service Manager, including restarting any failed processes.
    The ICM also starts and stops, and restarts the Service Manager for each node.
    The ICM will perform process migration during an instance or node failure.
    The ICM will be
    active on a single node. This is also true in a PCP environment, where the ICM
    will be active on at least one node at all times.
    Service Manager (FNDSM process) - Communicates with the Internal Concurrent
    Manager, Concurrent Manager, and non-Manager Service processes.
    The Service Manager (SM) spawns, and terminates manager and service processes (
    these could be Forms, or Apache Listeners, Metrics or Reports Server, and any
    other process controlled through Generic Service Management). When the ICM
    terminates the SM that
    resides on the same node with the ICM will also terminate. The SM is ?hained?
    to the ICM. The SM will only reinitialize after termination when there is a
    function it needs to perform (start, or stop a process), so there may be
    periods of time when the SM is not active, and this would be normal. All
    processes initialized by the SM
    inherit the same environment as the SM. The SM environment is set by APPSORA.
    env file, and the gsmstart.sh script. The TWO_TASK used by the SM to connect
    to a RAC instance must match the instance_name from GV$INSTANCE. The apps_<sid>
    listener must be active on each CP node to support the SM connection to the
    local instance. There
    should be a Service Manager active on each node where a Concurrent or non-
    Manager service process will reside.
    Internal Monitor (FNDIMON process) - Communicates with the Internal Concurrent
    Manager.
    The Internal Monitor (IM) monitors the Internal Concurrent Manager, and
    restarts any failed ICM on the local node. During a node failure in a PCP
    environment the IM will restart the ICM on a surviving node (multiple ICM's may
    be started on multiple nodes, but only the first ICM started will eventually
    remain active, all others will gracefully terminate). There should be an
    Internal Monitor defined on each node
    where the ICM may migrate.
    Standard Manager (FNDLIBR process) - Communicates with the Service Manager and
    any client application process.
    The Standard Manager is a worker process, that initiates, and executes client
    requests on behalf of Applications batch, and OLTP clients.
    Transaction Manager - Communicates with the Service Manager, and any user
    process initiated on behalf of a Forms, or Standard Manager request. See Note:
    240818.1 regarding Transaction Manager communication and setup requirements for
    RAC.
    Concurrent Manager Setup and Configuration Requirements in an 11i RAC
    Environment
    PCP를 사용하기위한 기본적인 Setup 절차를 설명하고 있습니다.
    In order to set up Setup Parallel Concurrent Processing Using AutoConfig with
    GSM,
    follow the instructions in the 11.5.8 Oracle Applications System Administrators
    Guide
    under Implementing Parallel Concurrent Processing using the following steps:
    1. Applications 11.5.8 and higher is configured to use GSM. Verify the
    configuration on each node (see WebIV Note:165041.1).
    2. On each cluster node edit the Applications Context file (<SID>.xml), that
    resides in APPL_TOP/admin, to set the variable <APPLDCP oa_var="s_appldcp">
    ON </APPLDCP>. It is normally set to OFF. This change should be performed
    using the Context Editor.
    3. Prior to regenerating the configuration, copy the existing tnsnames.ora,
    listener.ora and sqlnet.ora files, where they exist, under the 8.0.6 and iAS
    ORACLE_HOME locations on the each node to preserve the files (i.e./<some_
    directory>/<SID>ora/$ORACLE_HOME/network/admin/<SID>/tnsnames.ora). If any of
    the Applications startup scripts that reside in COMMON_TOP/admin/scripts/<SID>
    have been modified also copy these to preserve the files.
    4. Regenerate the configuration by running adautocfg.sh on each cluster node as
    outlined in Note:165195.1.
    5. After regenerating the configuration merge any changes back into the
    tnsnames.ora, listener.ora and sqlnet.ora files in the network directories,
    and the startup scripts in the COMMON_TOP/admin/scripts/<SID> directory.
    Each nodes tnsnames.ora file must contain the aliases that exist on all
    other nodes in the cluster. When merging tnsnames.ora files ensure that each
    node contains all other nodes tnsnames.ora entries. This includes tns
    entries for any Applications tier nodes where a concurrent request could be
    initiated, or request output to be viewed.
    6. In the tnsnames.ora file of each Concurrent Processing node ensure that
    there is an alias that matches the instance name from GV$INSTANCE of each
    Oracle instance on each RAC node in the cluster. This is required in order
    for the SM to establish connectivity to the local node during startup. The
    entry for the local node will be the entry that is used for the TWO_TASK in
    APPSORA.env (also in the APPS<SID>_<HOSTNAME>.env file referenced in the
    Applications Listener [APPS_<SID>] listener.ora file entry "envs='MYAPPSORA=<
    some directory>/APPS<SID>_<HOSTNAME>.env)
    on each node in the cluster (this is modified in step 12).
    7. Verify that the FNDSM_<SID> entry has been added to the listener.ora file
    under the 8.0.6 ORACLE_HOME/network/admin/<SID> directory. See WebiV Note:
    165041.1 for instructions regarding configuring this entry. NOTE: With the
    implementation of GSM the 8.0.6 Applications, and 9.2.0 Database listeners
    must be active on all PCP nodes in the cluster during normal operations.
    8. AutoConfig will update the database profiles and reset them for the node
    from which it was last run. If necessary reset the database profiles back to
    their original settings.
    9. Ensure that the Applications Listener is active on each node in the cluster
    where Concurrent, or Service processes will execute. On each node start the
    database and Forms Server processes as required by the configuration that
    has been implemented.
    10. Navigate to Install > Nodes and ensure that each node is registered. Use
    the node name as it appears when executing a nodename?from the Unix prompt on
    the server. GSM will add the appropriate services for each node at startup.
    11. Navigate to Concurrent > Manager > Define, and set up the primary and
    secondary node names for all the concurrent managers according to the
    desired configuration for each node workload. The Internal Concurrent
    Manager should be defined on the primary PCP node only. When defining the
    Internal Monitor for the secondary (target) node(s), make the primary node (
    local node) assignment, and assign a secondary node designation to the
    Internal Monitor, also assign a standard work shift with one process.
    12. Prior to starting the Manager processes it is necessary to edit the APPSORA.
    env file on each node in order to specify a TWO_TASK entry that contains
    the INSTANCE_NAME parameter for the local nodes Oracle instance, in order
    to bind each Manager to the local instance. This should be done regardless
    of whether Listener load balancing is configured, as it will ensure the
    configuration conforms to the required standards of having the TWO_TASK set
    to the instance name of each node as specified in GV$INSTANCE. Start the
    Concurrent Processes on their primary node(s). This is the environment
    that the Service Manager passes on to each process that it initializes on
    behalf of the Internal Concurrent Manager. Also make the same update to
    the file referenced by the Applications Listener APPS_<SID> in the
    listener.ora entry "envs='MYAPPSORA= <some directory>/APPS<SID>_<HOSTNAME>.
    env" on each node.
    13. Navigate to Concurrent > Manager > Administer and verify that the Service
    Manager and Internal Monitor are activated on the secondary node, and any
    other addititional nodes in the cluster. The Internal Monitor should not be
    active on the primary cluster node.
    14. Stop and restart the Concurrent Manager processes on their primary node(s),
    and verify that the managers are starting on their appropriate nodes. On
    the target (secondary) node in addition to any defined managers you will
    see an FNDSM process (the Service Manager), along with the FNDIMON process (
    Internal Monitor).
    Reference Documents
    Note 241370.1

    What is your database version? OS?
    We are using VCP suite for Planning Purpose. We are using VCP environment (12.1.3) in Decentralized structure connecting to 3 differect source environment ( consisting 11i and R12). As per the Oracle Note {RAC Configuration Setup For Running MRP Planning, APS Planning, and Data Collection Processes [ID 279156]} we have implemented RAC in our test environment to get better performance.
    But after doing all the setups and concurrent programs assignment to different nodes, we are seeing huge performance issue. The Complete Collection which takes generally on an avg 180 mins in Production, is taking more than 6 hours to complete in RAC.
    So I would like to get suggestion from this forum, if anyone has implemented RAC in pure VCP (decentralized) environment ? Will there be any improvement if we make our VCP Instance in RAC ?Do you PCP enabled? Can you reproduce the issue when you stop the CM?
    Have you reviewed these docs?
    Value Chain Planning - VCP - Implementation Notes & White Papers [ID 280052.1]
    Concurrent Processing - How To Ensure Load Balancing Of Concurrent Manager Processes In PCP-RAC Configuration [ID 762024.1]
    How to Setup and Run Data Collections [ID 145419.1]
    12.x - Latest Patches and Installation Requirements for Value Chain Planning (aka APS Advanced Planning & Scheduling) [ID 746824.1]
    APSCHECK.sql Provides Information Needed for Diagnosing VCP and GOP Applications Issues [ID 246150.1]
    Thanks,
    Hussein

  • What are  Pre Database Copy and Post data base copy activity list, Pre Migration and Post Migration activity list from SAP BW 7.0 to SAP BW 7.4 SPS6.

    BW on HANA :  Pre Database Copy and Post data base copy activity list, Pre Migration and Post Migration activity list from SAP BW 7.0 to SAP BW 7.4 SPS6.
    We are trying to copy database from SAP BW7.0 to SAP BW on HANA 7.4 SPS6 so we are in search for list of steps or activities during database copy both pre and post steps.
    Along with the above we are in search of Pre and post migration steps ones database is transferred successfully from oracle to HANA on 7.4 SPS6.
    Kindly help us in getting the exact course of action as requested.
    Thanks and Regards,
    Lavina Joshi

    Hi Lavina,
    try this link for starters: Upgrade and Migration - BW on HANA | SAP HANA
    Points to remember are:
    Preparation:
         -- Hardware Sizing
         -- Preparation of Data Centres
         -- HANA Hardware preparation
         -- System Landscape Readiness (upgrade software downloads, system readiness checks, etc)
         -- House Keeping activities on BW system (data clean up, etc)
    Post Installation:
         -- Sanity checks / Preparation and License checks
         -- JAVA Configurations
         -- Infoprovider conversions 
    Overall Stages are described below:
    # Environmental setup (HANA box)
         -- Initial system checks and Building Activities (system copy, Appln server setups, etc)
    # System readiness
                   - ZBW_HANA_COCKPIT Tool
                   - ZBW_HANA_CHECKLIST Tool
                   - ZBW_ABAP_ANALYZER Tool
                   - ZBW_TRANSFORM_FINDER Tool
                   - SIZING Report
                   - System Clean up Activities
                   - Impact of 7.4 on source system checks
                   - Java Upgrade for portal
    # DMO Stages
                   - Preparation & Pre Migration checks
                   - Execution / Migration
                   - Post Migration Activities
    # Testing Phase
                   - Source system checks/Activities
                   - System and Integration Testing
                   - End to End Testing
                   - Performance testing
                   - Reports
                   - BO reports / Interfaces
    Do let me know if you require any further information.
    Regards,
    Naren

  • 2012 R2 Cluster and Live Migration

    6 Node Cluster with Server 2012 R2, all VM's are Server 2012 R2
    4 Fiber SAN's
    Moving and Live Migration worked fine in FailOver Cluster Manager
    But this time we were trying do it with SCVMM 2012 R2 and just move one VM (Gen2)
    Of course it failed at 99%
    Error (12711)
    VMM cannot complete the WMI operation on the server (whatever) because of an error: [MSCluster_Resource.Name=&quot;SCVMM VMHost&quot;] The cluster resource could not be found.
    The cluster resource could not be found (0x138F)
    Recommended Action
    Resolve the issue and then try the operation again.
    How do I fix this? the VM is still running. The two vhdx files it was moving are smaller then orginal's , but it change the configuration file to point to new ones, which are bad.
    it says I can Repair it... Redo or Undo....of course neither of those options work.
    Wait for the object to be updated automatically by the next periodic Live migrate storage of virtual machine vmhost from whatever to whatever job.
    ID: 1708
    Cluster has no errors, SAN's have no errors, CSV have no errors. the machine running scvmm is VM running on the cluster

    How did you create this VM? if this is created outside of VMM, I recommend doing a manual refresh of the VM first to ensure that VMM can read its attributes. Then retry the operation.
    Btw, are the VMs using diff disk? any checkpoints associated with them?
    Kristian (Virtualization and some coffee: http://kristiannese.blogspot.com )

  • Install and configure Hyper V for VDI

    Hi Everyone
    I am trying to setup a POC lab using Hyper-V to demonstrate use case for VDI
    I do understand you need to have 2012R2 connection brokers and RDSH servers as part of the VDI deployment.
    Coming from a vmware background I have much to learn in this area. I have 4 HS22 blades installed with 2012R2 Datacentre and configured teaming for the management Network. All 4 2012R2 host presented with shared storage from our SAN. On each host there are
    6 NIC . 2 is for management / migration ?? and the rest of the 4 Nic is for the VM data network
    On the management Teaming Nic, I have setup 2 NIC in independent mode with load balancing Dynamic. The second nic is set as Standby Adapter.
    Before I enable the Hyper V role , I would like to find out the best practice for setting up 2012R2 HyperV for VDI ? Do I need a seprate migration network or use the same management teaming Nic ? And Where do use specify in hyper to use this network for
    vm migration between host.
    In Vsphere we use port group to assign different Vlan for each VMs. You can have multiple Port groups (with vlan id)  belongs to a vsphere distributed V switch. Host can be part of the distribute vswitch.
    My understanding you have to manually enter the vlan id on each separate vm, there is no drop box to choose the vlan 
    is there any way we can achieve the similar result in Hyper V. 
    we do have license to use VMM
    Many thanks

    Here's an example of how I set up my networking for VDI using 2 hosts and a 10Gb connection.  This configuration creates the team, the virtual switch with bandwidth mode, adds the different logical networks, sets the VLANs, and assigns the bandwidth
    priority for each. You dont see a VLAN associated with the VM Traffic adapter because the switch ports include the VM Traffic Native VLAN for that network.
    This is a fairly common setup for sharing the different networks over a 10GB pipe.  Also, you don't see our storage network in there due to the way our FCoE is configured.  Our FCoE configuration is a separate 10GB connection that uses the switch
    to prioritize the bandwidth.
    PS C:\Users\Administrator> New-NetLbfoTeam -name ClusterTeam -TeamMembers "Ethernet 2","Ethernet 6","Ethernet 8","Ethernet 9"
    PS C:\Users\Administrator> New-VMSwitch "ClusterSwitch" -MinimumBandwidthMode weight -NetAdapterName "ClusterTeam" -AllowManagementOS 0
    PS C:\Users\Administrator> Set-VMSwitch "ClusterSwitch" -DefaultFlowMinimumBandwidthWeight 20
    PS C:\Users\Administrator> Add-VMNetworkAdapter -ManagementOS -name "VM Traffic" -SwitchName "ClusterSwitch"
    PS C:\Users\Administrator> Add-VMNetworkAdapter -ManagementOS -name "Management" -SwitchName "ClusterSwitch"
    PS C:\Users\Administrator> Add-VMNetworkAdapter -ManagementOS -name "Live Migration" -SwitchName "ClusterSwitch"
    PS C:\Users\Administrator> Add-VMNetworkAdapter -ManagementOS -name "Cluster" -SwitchName "ClusterSwitch"
    PS C:\Users\Administrator> Set-VMNetworkAdapterVlan -ManagementOS -VMNetworkAdapterName "Management" -Access -VlanId 153
    PS C:\Users\Administrator> Set-VMNetworkAdapterVlan -ManagementOS -VMNetworkAdapterName "Live Migration" -Access -VlanId 13
    PS C:\Users\Administrator> Set-VMNetworkAdapterVlan -ManagementOS -VMNetworkAdapterName "Cluster" -Access -VlanId 12
    PS C:\Users\Administrator>
    PS C:\Users\Administrator>
    PS C:\Users\Administrator> Set-VMNetworkAdapter -ManagementOS -name "VM Traffic" -MinimumBandwidthWeight 40
    PS C:\Users\Administrator> Set-VMNetworkAdapter -ManagementOS -name "Management" -MinimumBandwidthWeight 20
    PS C:\Users\Administrator> Set-VMNetworkAdapter -ManagementOS -name "Live Migration" -MinimumBandwidthWeight 20
    PS C:\Users\Administrator> Set-VMNetworkAdapter -ManagementOS -name "Cluster" -MinimumBandwidthWeight 20

  • OBIEE 11g, Informatica and DAC: Migrating from Oracle DB to SQL Server?

    Hi Gurus,
    Currently we are implementing OBIEE 11g with Oracle BI Application for EBS (Supply Chain, Procurement & Finance modules). We have incorporated all OUT-OF-THE-BOX mappings and configurations in DAC, Informatica and RPD (no change, only OOTB). We were using Oracle DB and Linux servers.
    Now the client wants to migrate this to one Windows box.
    Can anyone point out, what are the changes need to done to migrate to SQL Server database. Any existing documentation or link will be helpful.
    Edited by: Sudipta Gupta on Aug 2, 2012 1:59 PM

    If you are using SQL Server 2008 then you need to edit the DAC config.bat file replace sqljdbc.jar with sqljdbc4.jar.
    Rest of DAC and Informatica configuration is almost similar.
    Let us if you come across any issues.
    Hope this helps

  • Configuration Migration Tool Question

    Hi
    I trying to migrate a FIM configuration from one server to another.
    While following the steps described in "Introduction to the Configuration Migration Tool" document I get an error in step 8.
    Join-FIMConfig : Two objects with the same AnchorAttributeValue were detected.  A requirement for using this migration
    tool is that AnchorAttributeValue is unique within an Object Type.
    AnchorAttributeNames = AppliesToCreate AppliesToEdit AppliesToView DisplayName
    AnchorAttributeValues = AppliesToCreate AppliesToEdit AppliesToView DisplayName
    ObjectType = ObjectVisualizationConfiguration
    ObjectID 1 = urn:uuid:ecbff780-511b-45da-85fe-65cbf236d80f
    ObjectID 2 = urn:uuid:8aa59dca-7759-4d32-96d2-3f21ed1239f2
    At line:1 char:26
    I am not ware, that I have changed anything in the portal itself at all. I only have custom Sync rules, Sets and MPRs defined.
    How can I determin which those objects are that make the trouble here?
    What are preferred join rules to overcome this problem?
    Thanks in advance.
    Henry

    I'm having the exact same error, but for other attributes:
    Join-FIMConfig : Two objects with the same AnchorAttributeValue were detected.  A requirement for using this migration
    tool is that AnchorAttributeValue is unique within an Object Type.
    AnchorAttributeNames = DisplayName
    AnchorAttributeValues = DisplayName
    ObjectType = AttributeTypeDescription
    ObjectID 1 = urn:uuid:acbcad3b-8394-4af3-a1d4-149cabae05d1
    ObjectID 2 = urn:uuid:9f35c912-18bb-4b73-b128-281be0cae32f
    Any tips on how to resolve this? These are built-in attributes, so I think I didn't cause this. When does he actually complain about duplicate values? Because there are more objects with duplicate DisplayNames...
    The objects are:
    <?xml version="1.0" encoding="utf-8"?>
    <Results xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
    <ExportObject>
    <Source>http://fimsvc.corp.contoso.com:5725/resourcemanagementservice</Source>
    <ResourceManagementObject>
    <ObjectIdentifier>urn:uuid:9f35c912-18bb-4b73-b128-281be0cae32f</ObjectIdentifier>
    <ObjectType>AttributeTypeDescription</ObjectType>
    <IsPlaceholder>false</IsPlaceholder>
    <ResourceManagementAttributes>
    <ResourceManagementAttribute>
    <AttributeName>ObjectID</AttributeName>
    <HasReference>false</HasReference>
    <IsMultiValue>false</IsMultiValue>
    <Value>urn:uuid:9f35c912-18bb-4b73-b128-281be0cae32f</Value>
    </ResourceManagementAttribute>
    <ResourceManagementAttribute>
    <AttributeName>CreatedTime</AttributeName>
    <HasReference>false</HasReference>
    <IsMultiValue>false</IsMultiValue>
    <Value>14/06/2010 17:48:45</Value>
    </ResourceManagementAttribute>
    <ResourceManagementAttribute>
    <AttributeName>DataType</AttributeName>
    <HasReference>false</HasReference>
    <IsMultiValue>false</IsMultiValue>
    <Value>Reference</Value>
    </ResourceManagementAttribute>
    <ResourceManagementAttribute>
    <AttributeName>Description</AttributeName>
    <HasReference>false</HasReference>
    <IsMultiValue>false</IsMultiValue>
    <Value>The binding's resource type</Value>
    </ResourceManagementAttribute>
    <ResourceManagementAttribute>
    <AttributeName>DisplayName</AttributeName>
    <HasReference>false</HasReference>
    <IsMultiValue>false</IsMultiValue>
    <Value>Resource Type</Value>
    </ResourceManagementAttribute>
    <ResourceManagementAttribute>
    <AttributeName>Multivalued</AttributeName>
    <HasReference>false</HasReference>
    <IsMultiValue>false</IsMultiValue>
    <Value>False</Value>
    </ResourceManagementAttribute>
    <ResourceManagementAttribute>
    <AttributeName>Name</AttributeName>
    <HasReference>false</HasReference>
    <IsMultiValue>false</IsMultiValue>
    <Value>BoundObjectType</Value>
    </ResourceManagementAttribute>
    <ResourceManagementAttribute>
    <AttributeName>ObjectType</AttributeName>
    <HasReference>false</HasReference>
    <IsMultiValue>false</IsMultiValue>
    <Value>AttributeTypeDescription</Value>
    </ResourceManagementAttribute>
    <ResourceManagementAttribute>
    <AttributeName>UsageKeyword</AttributeName>
    <HasReference>false</HasReference>
    <IsMultiValue>true</IsMultiValue>
    <Values>
    <string>Microsoft.ResourceManagement.WebServices</string>
    </Values>
    </ResourceManagementAttribute>
    </ResourceManagementAttributes>
    <LocalizedResourceManagementAttributes />
    </ResourceManagementObject>
    </ExportObject>
    </Results>
    <?xml version="1.0" encoding="utf-8"?>
    <Results xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
    <ExportObject>
    <Source>http://fimsvc.corp.contoso.com:5725/resourcemanagementservice</Source>
    <ResourceManagementObject>
    <ObjectIdentifier>urn:uuid:acbcad3b-8394-4af3-a1d4-149cabae05d1</ObjectIdentifier>
    <ObjectType>AttributeTypeDescription</ObjectType>
    <IsPlaceholder>false</IsPlaceholder>
    <ResourceManagementAttributes>
    <ResourceManagementAttribute>
    <AttributeName>ObjectID</AttributeName>
    <HasReference>false</HasReference>
    <IsMultiValue>false</IsMultiValue>
    <Value>urn:uuid:acbcad3b-8394-4af3-a1d4-149cabae05d1</Value>
    </ResourceManagementAttribute>
    <ResourceManagementAttribute>
    <AttributeName>CreatedTime</AttributeName>
    <HasReference>false</HasReference>
    <IsMultiValue>false</IsMultiValue>
    <Value>14/06/2010 17:48:45</Value>
    </ResourceManagementAttribute>
    <ResourceManagementAttribute>
    <AttributeName>DataType</AttributeName>
    <HasReference>false</HasReference>
    <IsMultiValue>false</IsMultiValue>
    <Value>String</Value>
    </ResourceManagementAttribute>
    <ResourceManagementAttribute>
    <AttributeName>Description</AttributeName>
    <HasReference>false</HasReference>
    <IsMultiValue>false</IsMultiValue>
    <Value>The resource type of a resource. This attribute is assigned its value when the resource is created in the FIM service database by the FIM service. It cannot be modified by any user.</Value>
    </ResourceManagementAttribute>
    <ResourceManagementAttribute>
    <AttributeName>DisplayName</AttributeName>
    <HasReference>false</HasReference>
    <IsMultiValue>false</IsMultiValue>
    <Value>Resource Type</Value>
    </ResourceManagementAttribute>
    <ResourceManagementAttribute>
    <AttributeName>Multivalued</AttributeName>
    <HasReference>false</HasReference>
    <IsMultiValue>false</IsMultiValue>
    <Value>False</Value>
    </ResourceManagementAttribute>
    <ResourceManagementAttribute>
    <AttributeName>Name</AttributeName>
    <HasReference>false</HasReference>
    <IsMultiValue>false</IsMultiValue>
    <Value>ObjectType</Value>
    </ResourceManagementAttribute>
    <ResourceManagementAttribute>
    <AttributeName>ObjectType</AttributeName>
    <HasReference>false</HasReference>
    <IsMultiValue>false</IsMultiValue>
    <Value>AttributeTypeDescription</Value>
    </ResourceManagementAttribute>
    <ResourceManagementAttribute>
    <AttributeName>UsageKeyword</AttributeName>
    <HasReference>false</HasReference>
    <IsMultiValue>true</IsMultiValue>
    <Values>
    <string>Microsoft.ResourceManagement.WebServices</string>
    </Values>
    </ResourceManagementAttribute>
    </ResourceManagementAttributes>
    <LocalizedResourceManagementAttributes />
    </ResourceManagementObject>
    </ExportObject>
    </Results>
    http://setspn.blogspot.com

  • Migration from Stellent v7.g to UCM 11g - Configuration Migration Utility

    Hello,
    I am in the process of planning a migration from the old Stellent 7.5 system to the new Oracle UCM 11g.
    I keep hearing of a utility called "Configuration Migration Utility" to setup the 11g system with the same users, folders, metadata, etc... as the older Stellent system. Does anybody know where to find this utility? Is there a single tool that will "export" the configuration from my Stellent and import that configuration onto my 11g?
    Please let me know.
    Thanks!
    JDM

    Hi
    CMU tool is a way to create the entire configuration bundle from 1 instance to the other .
    This is a component that will be available from patchset 13526049 which is for CS 7.5
    You will need to put this patchset on the 7.5 server and then from the option list select CMU which will then install the component on server .
    For ucm 11g it is already installed on the server but disabled by default .
    Thanks
    Srinath

  • CVP and other Type 10 VRU PIM on the same PG

    HI All,
    I have a lab that currently has a CM and CVP (Type 10) PIM on the same PG.  We will be adding a Nuance IVR (Nuance is being used as an IVR with Translation Routing not just TTS/ASR) to the lab for testing because the Nuance IVR is already in place in Production and we are migrating to CVP so therefore we want the Nuance IVR in place for testing purposes.
    The Nuance IVR works as a Type 10 IVR so my question is can I have a CVP PIM (Type 10) and a Nuance PIM (Type 10) on the same PG?  In the past, i know i cannot have CVP and IPIVR on the same PG because only one of the PIMs would be active at a time.  I was under the impression that this was because CVP and IPIVR use different IVR types.
    Since Nuance is also type 10, will I be able to colocate the pims (CVP and Nuance) or will i need a seperate PG for Nuance?
    Thanks

    Sure you can - it's just an IVR PIM that understands GED 125.
    In the past, i know i cannot have CVP and IPIVR on the same PG because only one of the PIMs would be active at a time.
    Huh? I have that in the lab - a PIM to IPIVR, a PIM to a CVP3 type 5, a PIM to a CVP PIM type 2, a PIM to a CVP4 type 10. At least I think that's what one of the lab ICMs has. I'm not at the office so cannot confirm.
    Regards,
    Geoff

  • Difference between customization and configuration

    Hi Sir's
    Could i know difference between customization and configuration as well as validation and substitution
    Thanks
    Edited by: manjusap36 on Oct 22, 2009 7:23 PM

    Hi,
    The difference between cutomizing and configuration is:
    - CONFIGURATION: we will configure the system to meet the needs of your business by using the existing data.
    - CUSTOMIZING: we will customise or adapt the system to your business requirements, which is the process of mapping SAP to your business process.
    Moreover:
    Configuration: Attaching to process flow to the existing one
    Customization: Adding new fields/Tables as per client requirements. to customise or adapt the system to your business requirements, which is the process of mapping SAP to your business process. It involves code changes to create functionality that is not available through configuration. Customization can be costly and can complicate future upgrades to the software because the code changes/modifications may not easily migrate to the new version.
    Regards
    Devi

Maybe you are looking for