CVP Redundant server config

hello everyone
i have a project for ucce
in the list i see there have 2 CVP-90-SERVER-SW and 40 CVP-9X-PTS and 40 CVP-9X-REDPT
i known there have redundant
but i dont know how to install the server ...
should i install three servers for console , primary Call server and VXML server and  second Call server and VXML server ?
and then on console confg the primary and second call server
next apply the license use primary server information for CVP-9X-PTS  and use second server information apply  CVP-9X-REDPT
next upload the license form console??

EDIT:
I think a good way for your setup, if I'm understanding your task correctly, is to have two CVP servers and one OAMP server. The CVP servers will run the Call Server, VXML Server, and Web Services Manager. Make sure you size the servers correctly because you're going to have three tomecat processes running and it will crush your server if you don't size it adequately (RAM). 

Similar Messages

  • CVP Media server config for Agent greeting

    Hi All,
    How to write agent greeting files to multiple media servers, (4 media servers in our case)
    I got to know that setting the default media server to act as a proxy will resolve this issue. Kindly let me know is this correct and how this could be done.?
    Thanks and Regards,
    Karthik

    Hi,
    Did you find the solution to this? Can't find anything in the docs.
    Thanks
    Anthony

  • CVP - SIP Server Groups and Redundant SIP Proxy (CUPS)

    I am migrating from a CVP 7 + UCCE 7.5 solution which uses srv.xml files on the CVP servers to implement redundancy
    from CVP to the SIP Proxies (which are CUPS based).
    In the new CVP 8.5 + UCCE 8.5 solution, I am trying to set up equivalent redundancy, which
    is now done via Server Groups.
    The solution is geographically diverse, with one CVP server + a CUPS server (publisher) at Site1,
    and the second CVP + CUPS server (subscriber) at site 2.
    Previously (on CVP 7), I was able to configure each CVP server so that its priority was to use the CUPS server at its
    "local" site. Hence there were 2 different srv.xml files, one for each CVP server.
    To configure this in CVP 8.5, I would need 2 SIP Server groups, to give each CVP a group
    configured to prefer the "local" CUPS server. But when I configure a SIP server group(s) pointing to CUPS, I seem to be only able
    to get one single Server Group to work. That single Server Group only works if the server group name
    matches exactly the Domain Name configured in CUPS. Since CUPS' Domain name is a single cluster wide name,
    I can get only one Server Group working, not the two that I need.
    So, where am I going wrong?
    Regards.

    Fairly new to CVP and had a question about how to configure the dialed number patterns so they point to more than 1 CUCM. My environment doesn't have a SIP Proxy or DNS Srv. That said, I tried to create as what was mentioned above - SIP Serve Group with 2 CUCM Subs then have a dialed number pattern point to it. However, when I initiate a call to an ICM script and eventually hit an agent, it flips between ready and reserve. When I change the dialed number pattern to point to a specific CUCM, it works fine. Followed all the aobve recommendations as well. Any idea how to make this work? Hoping I'm just missing something here...

  • VI Server Config in LV 8.0

    Greetings All,
    I've recently installed LV 8.0, and have been starting the process of porting a distributed application (with an RT component) into a LV 8.0 project. So far, it hasn't been too promising. One of the main stumbling blocks appears to be figuring out the new way to configure VI Server over TCP using multiple application instances. In fact, I can't even get the "Real-Time System Manager" to work with the simplest of tests:
    To illustrate the difficulty, try this:
    1) Open a new project.
    2) Add the PXI RT target to the project.
    3) Add a new test VI (under the PXI target), and set it up to do something trivial. (Add some numbers, display a while loop counter, etc.)
    4) Deploy and run the test VI on the PXI
    5) Open the "Real-Time System Manager"
    Even after configuring VI server for both the project and the PXI, I get the following error message:
    "Real Time System Manager Error:
    Can not connect to [Remote_PXI].
    Please ensure that VI Server is enabled and this machine is allowed to connect" 
    It must have something to do with this new "multiple application instances" business in LV 8.0, but I really don't know what it is. I have used VI Server over TCP for several years and have never had any problems connecting remote PCs. And in fact, the same VI server config settings (for PC and PXI) that worked for LV 7.1 appear to be inncorrect for 8.0. I have set the parameters in the "master" options dialog, as well as in the project dialogs -- for both the PXI target, and the Desktop PC. (Default port 3363, TCP enabled for all clients and users.)
    Can anyone shed some light on this? If there was any option to bypass the LV project when working with the PXI in LV 8.0, I would be trying that next. However, since the NI engineers have eliminated this option from LV 8.0, my previous experience in this area appears to be completely obsolete. It looks like I'm completely stopped in my tracks until this difficulty is sorted out.
    Thanks in advance for any advice you can provide,
    -- D.
    www.movimed.com - Custom Imaging Solutions

    DAQ Dude,
    I know you've said you've been looking through the help, but have you checked this?  The TCP/IP must be enabled as it is not by default. 
    Complete the following steps to configure the VI Server.
    Select Tools»Options to display the Options dialog box.
    (Optional) The default VI Server configuration is suitable for most applications. Select VI Server: Configuration from the Category list if you need to change this default configuration. The default configuration allows ActiveX to call LabVIEW, but does not allow TCP/IP as a protocol. To use TCP/IP with other LabVIEW applications, place a checkmark in the TCP/IP checkbox and configure the VI Server: Machine Access settings.
    If you want to control browser access to the VIs or specify which VIs remote applications can control, configure the VI Server: Machine Access and Exported VIs options.
    Click the OK button to close the Options dialog box and save the changes.
    Note  If a target in a LabVIEW project supports the VI Server, you can configure the VI Server for the target using the Properties dialog box for the target. For example, use the My Computer Properties dialog box to configure the VI Server for the My Computer target.
    Error 66 is "LabVIEW:  The network connection was closed by the peer," as you suggest, but can be seen by improper VI server configuration settings as well. 

  • SBS 2011 VM and Server 2012 R2 Hyper-V host. After rebuilding the host image, no email is received, EMC states "You don't have sufficient permissions to view this data" when looking at organization config. Server config not shown on EMC.

    Hyper-V Host Server 2012 R2 x64 drive c:
    All VMs, including SBS 2011 Standard x64 are on drive d:
    I replaced my motherboard and defined a Marvell RAID 1 Mirror for my boot drive C:.  My drive D: containing all of my Hyper V machines remained untouched since the new MB had Intel Matrix Controller with RAID 5, as did the old MB.
    Since the C: drives are a few bytes smaller after configured as a RAID 1, I was unable to restore drive C from the image copy, so I rebuilt a new Hyper-V Host identical as possible using Server 2012 R2 x64.  I had to redefine the Hyper-V machines on
    the host, and the 1st time I brought it all (host and VMs) I had to reconfigure the NICs due to new MAC addresses, and verifying SBS 2011 DNS and DHCP for all physical and Hyper-V machines. Otherwise my Hyper-V SBS 2011 x(64) wasn't touched.
    Now the SBS Exchange 2010 is not receiving mail.  In the Exchange Management Console clicking on the Organization config gives me a highlighted error "You don't have sufficient permissions to view this data".  The Server
    Config is no longer on the EMC.  The Recipient Config looks fine.
    Outlook 2013 x64 connects to the Exchange Server, but no new mail appeared.  There were just a few older messages that came in since the last time I opened Outlook.  My public DNS on GoDaddy was not changed.  I did not change sending mail
    through my ISP Sonic.net.  The SBS internal DNS doesn't have an MX record, but I'm not sure it ever did since my GoDaddy public DNS has an MX record.
    I tried restoring to an earlier Image Copy, but that made no difference.  I'm using the Windows Backup from SBS 2011 for my daily image copy backups.
    - Michael Faklis

    Hi Michael,
    à
    After more research and running the Best Practices report from the EMC, I am missing a slew of ManagementRolesAndRoleGroups from the RBAC container.
    Based on your description, it seems that you have find the cause of this issue. On current situation, I still
    suggest that you should run
    SBS 2011 BPA and then check if can find some relevant errors. Just for a confirmation.
    Meanwhile, please refer to following articles and check if can help you.
    Apply
    missing Exchange 2010 RBAC Management Roles and Policies
    RBAC Manager
    (Exchange 2010 SP2)
    Hope this helps.
    Best regards,
    Justin Gu

  • Possible to add and persist elements in server config, for use by cons ext?

    I'm considering what will be my obstacles if I try to write a console extension that we would use to view excerpts of an application log file, the application of which is deployed to each server in our domain(s). It doesn't log to the WebLogic server log, it writes it to an external log file (through log4j), and each server (several servers on each box) uses a slightly different path to its log file.
    One issue that I'll have is getting the console extension to know what the path to the log file is. I think the best way, over all, is just to have the user enter the path in the form presented by the console extension. My problem is how to persist that setting, because I'd prefer they didn't have to enter that every time they entered the form.
    Several years ago, I wrote a console extension for WL 8.1.4 which had a similar issue. I ended up simply writing the setting into a properties file inside the extension WAR. This only works (I believe) if the WAR is deployed exploded. I could do that, but I don't like that idea very much.
    What would be nice is if I could "extend" the server config.xml with an additional element in the "Server" element, where I could store this information. Unfortunately, I don't see any support for doing something like that.
    Another alternative I'm considering is whether it's possible to extend the "Summary of Log Files" page in "Diagnostics" with an application-specific log file, but I don't see any way to do that.

    Well, I appreciate the suggestion, but it's not exactly a secret, to me at least. I've used it for human-readable things recently. It occurred to me that that might be my only option, but I certainly wasn't going to assume that. As it seems like this is likely my only option, I guess I can see some interesting conventions for dealing with this. You have to assume that the field could be written to by other code, and that code would have to make the same assumption. I guess I'd have to define a certain XML element as the root of my structure. If I find it, that region between the start and end element is mine to use and modify. If I don't find it, I'll insert my element at the end of the field value.

  • Error when trying to open 'Hyperion FDM App Server Config Manager'

    Hi,
    When I am trying to open FDM App Server Config Manager/Load Balance configuration/Task Manager configuration,I am getting the below error
    ' COM object with CLS ID-{xxxxx} is either not valid or nor registered'
    Could any one explain me what this error mean and what impact will it have on existing FDM application.
    Thanks in advance

    Hi,
    Could you please check the IIS log and see what’s the error code?
    Try using the administrator account to log in the Outlook and see if he can see the apps successfully.
    Thanks,
    Simon
    If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Content server - config?

    Dear all,
    I am working on DMS with Content server.
    Particullarly now in CONTENT server CONFIG.
    Any one could kindly help me out with the procedure and documents.
    Regards,
    John.

    Dear Ronald,
    Just now saw your reply.Thanx for the care.
    I was working in a different location for past 2 days so i couldn't see the mail.
    Actually v r trying to shift our db to SAP.And we r using DMS(Document Management System) and using webdocuments a BSP for interaction with database(Content server.)
    So v want to push up our data into <b>HTTP enabled CONTENT SERVER</b>.For this i need help on Cofig. of content server.
    Awaiting your reply.
    Thanx & regards,
    John wesley.

  • Question About CVP Call Server Logs

    Hi Members,
    In the CallServer Logs i could see a [SIP_LEG_PRERTE_CORRID] - Publishing ,, [ICM_REQUEST_INSTRUCTION]
    Could someone tellme what is the difference between [SIP_LEG] and  [SIP_LEG_PRERTE_CORRID]
    In what are all the scenarios i would get [SIP_LEG_PRERTE_CORRID] this leg
    Regards,
    Senthil

    Hi Kris,
    Thanks For your reply. Here is my Scenario.
    PSTN---->VoiceGateway---->CUSP---->CVP CallServer----->ICM---->Script(Just to Play Music).
    Here in ICM i have a Dialed Number configured and Mapped to a Calltype and Calltype is Associated in the Script where i have a IF Node (condition Match the Dialed Number).
    We have lot of TFN's configured and everything is working fine without any issue.
    Now i have to add new DID's in my Setup. When i test the Call it is not hitting my START NODE on the Script itself.
    I have attached my ICM Router Logs here. Please let me know if you have any suggestion.
    ICM Router Logs for the Dialog ID : 515149
    07:21:29 rb-rtr Trace: Dialog (515149) has a correlation id (7 7) that is unknown.
    07:21:29 rb-rtr Trace: For message (14) from routing client iyogi_CVP_PG_RC2 (ID 5003) could not find dialog id (7).
    07:21:29 rb-rtr Trace: Router sending dialog fail reason (11) for dialog (515149).
    CVP Call Server Logs for the Dialog ID : 515149
    137620197: 10.110.10.18: May 27 2011 07:21:29.593 -0700: %_Message-6-com.dynamicsoft.DsLibs.DsUALibs.DsSipObject.Message:  In DsMimeEntity.parseBody() - Content type application/x-q931 is unregistered. 
    137620198: 10.110.10.18: May 27 2011 07:21:29.593 -0700: %_Message-6-com.dynamicsoft.DsLibs.DsUALibs.DsSipObject.Message:  In DsMimeEntity.parseBody() - Content type application/gtd is unregistered. 
    14036239: 10.110.10.18: May 27 2011 07:21:29.593 -0700: %CVP_8_0_ICM-7-CALL:  {Thrd=pool-1-thread-50-ICM-6090032} CALLGUID = 31D4D479100001305602249B0A6E0A12, DLGID = -1 [null] - Processing ,, [MsgBus:NEW_CALL],   ssId=SYS_SIP2,   mediaType=,   location=,   locationpkid=,   locationsiteid=,   srcaddr=10.100.0.9,   pstntrunkgroupid=10.100.0.9 ,   pstntrunkgroupchannelnum=2147483647,   sipheader=,   rckey=,   rcday=,   rcseq=,   uui=,   CallContext:,     user.media.id: 31D4D479100001305602249B0A6E0A12,, LEGID = null, DNIS = -1, ANI = -1 
    14036240: 10.110.10.18: May 27 2011 07:21:29.593 -0700: %CVP_8_0_ICM-7-CALL:  {Thrd=pool-1-thread-50-ICM-6090032} CALLGUID = 31D4D479100001305602249B0A6E0A12 - Correlation ID routed call 
    14036241: 10.110.10.18: May 27 2011 07:21:29.593 -0700: %CVP_8_0_ICM-7-CALL:  {Thrd=pool-1-thread-50-ICM-6090032} CALLGUID = 31D4D479100001305602249B0A6E0A12, DLGID = 515149 [SIP_LEG_PRERTE_CORRID] - Publishing ,, [ICM_REQUEST_INSTRUCTION],   dialogueId=515149,   sendSeqNo=1,   trunkGroupId=200,   trunkNumber=1,   serviceId=2,   uui=,   correlationId=7,   location=,   locationpkid=,   pstntrunkgroupid=10.100.0.9 ,   pstntrunkgroupchannelnum=2147483647,   sipheader=,, LEGID = 6B6C5D0A-87A311E0-8FF3C7B6-824C2EAB, DNIS = 35315260067, ANI = 18664281713 
    14036242: 10.110.10.18: May 27 2011 07:21:29.593 -0700: %CVP_8_0_ICM-7-CALL:  {Thrd=pool-1-thread-138-ICM-6090033} CALLGUID = 31D4D479100001305602249B0A6E0A12, DLGID = 515149 [SIP_LEG_PRERTE_CORRID] - Processing ,, [ICM_DIALOGUE_FAILURE_EVENT],   dialogueId=515149,   sendSeqNo=1,   errorCode = E_UNSPECIFIED_FAILURE,, LEGID = 6B6C5D0A-87A311E0-8FF3C7B6-824C2EAB, DNIS = 35315260067, ANI = 18664281713 
    14036243: 10.110.10.18: May 27 2011 07:21:29.593 -0700: %CVP_8_0_ICM-7-CALL:  {Thrd=pool-1-thread-138-ICM-6090033} CALLGUID = 31D4D479100001305602249B0A6E0A12, DLGID = 515149 [SIP_LEG_PRERTE_CORRID] - Publishing ,, [MsgBus:DIALOGUE_FAILURE],   ssId=SYS_SIP2,   errorCode=E_UNSPECIFIED_FAILURE,, LEGID = 6B6C5D0A-87A311E0-8FF3C7B6-824C2EAB, DNIS = 35315260067, ANI = 18664281713 
    12185266: 10.110.10.18: May 27 2011 07:21:29.593 -0700: %CVP_8_0_SIP-3-SIP_CALL_ERROR:  CALLGUID = 31D4D479100001305602249B0A6E0A12 LEGID = 6B6C5D0A-87A311E0-8FF3C7B6-824C2EAB - [INBOUND] - DIALOGUE_FAILURE from ICM Router sends 404 rejection to call. errorcode=15 [id:5004]
    12185267: 10.110.10.18: May 27 2011 07:21:29.593 -0700: %CVP_8_0_SIP-3-SIP_CALL_ERROR:  CALLGUID = 31D4D479100001305602249B0A6E0A12 LEGID = 6B6C5D0A-87A311E0-8FF3C7B6-824C2EAB - [INBOUND] - ABNORMALLY ENDING - SIP code [404], Reason Hdr [SIP;cause=404] Not Found, GW call using SURV TCL flag [false], NON NORMAL flag [true], USE ERROR REFER flag [true] with AGE (msecs) 0 and Call History :  [id:5004]
    Regards,
    Senthil

  • How to View BI Server Config parameters with Jconsole

    Hi Experts
    I want to examine the OBIEE 10g Server config params using the JConsole. I tried to start the Java agent by, navigating to the directory *"<oraclebi home>\systemdmanagement”*, and issuing the command *“runagent”.*
    I guess I am missing some options /variables that I would need to pass when issuing *“runagent”.*
    Please suggest . Thanks in advance.
    Edited by: 858793 on May 22, 2013 6:42 AM

    one you have the data in the infosource, for performance and holding history, you shoudl move the data in a ods or a cube.
    ODS for daily report, only daily data no history
    CUbe for historical Reporting and daily reporting.
    you wil need to create update rules. and process chain to load data in yoru data targets( ODS or CUbe). then create a query on them. play with the query how you want the data to show. try to USe 7.0 as its more flexible if not 3.5.
    you can broadcast it straight to e-mails using web broadcasting. other wise create web template( as define in the steps in the previous post).
    remember do everything in yoru SANDBOX system or Development system. do not under any circumstances do this in production or testing.
    any question feel free to post
    hope this helps.
    Amer

  • CVP call server logs - Hi All, I am trying to figure out whether caller party(End User) hangup the call first or UCCE Agent

    CVP call server logs
     Hi All,
    I am trying to figure out whether caller party(End User) hangup the call first or UCCE Agent.
    Attaching CVP call server Logs& UCCE TCD& Route Call Details for your reference.

    From the CVP logs, it can be determined which side disconnected the call first. For each call, CVP keeps track each call leg. From Inbound Gateway to CVP is INBOUND leg, rest are OUTBOUND leg. You can then look at which leg the SIP BYE message is received first.
    Since you have very basic log enabled, you will not see the exact SIP message. But it can be determined by the outcome of the message. Here is the snippet of the log during the disconnect:
    Line 3766: 3083689: 10.180.245.43: Sep 12 2014 12:21:11.293 -0700: %CVP_8_5_SIP-7-CALL:  {Thrd=DIALOG_CALLBACK.6} CALLGUID = CBCCDD8539E811E4A3E2CCEF48565980 LEGID = CC65CE04-39E811E4-87DFD7D1-64B198F2 - [INBOUND] DURATION (msecs) = 25610 - DIALOG TERMINATED. Reason: Q.850;cause=16
    Line 3768: 3083690: 10.180.245.43: Sep 12 2014 12:21:11.293 -0700: %CVP_8_5_SIP-7-CALL:  {Thrd=DIALOG_CALLBACK.6} Sending BUS MSG:>>HEADERS: (JMSType)=MsgBus:CALL_STATE_EVENT (JMSDestination)=Topic(CVP.SIP.CC.EVENT) (JMSTimestamp)=1410549671293 >>BODY: callguid=CBCCDD8539E811E4A3E2CCEF48565980 RouterCallKey=6472 RouterCallKeySent=true causecode=1 timezone=America/Los_Angeles RouterCallKeySequenceNumber=0 version=CVP_8_5 labeltype=1 RouterCallKeyDay=151099 calldate=Fri Sep 12 12:21:11 PDT 2014 label=190376 localOffset=-420 eventid=6 calllegid=CC65CE04-39E811E4-87DFD7D1-64B198F2  >>STATE: isTabular=false isWriteable=true cursor=-1  
    The first Termination message came on the INBOUND leg which is the PSTN. That means, PSTN side disconnected the call first.
    Hope this helps.
    Abu

  • Is it safe to edit /Library/Server/Config/ from outside Server.app?

    I want to add a virtual_mailbox_domains directive to /Library/Server/Config/Mail/postfix/main.cf for postfix.  Is that safe to do?  Will my changes be retained across  version updates?

    AnalogKid wrote:
    I want to add a virtual_mailbox_domains directive to /Library/Server/Config/Mail/postfix/main.cf for postfix.  Is that safe to do?  Will my changes be retained across  version updates?
    I've modified that file from the command line numerous times in SL Server in order to make configuration changes that can't be done through Server Admin, so I would expect it to work the same in ML Server.

  • SQL Server Config Manager, Windows Administration Tools, Manage Computer and Task Manager

    I want to cross check the
    SQL Server Config Manager, Windows Administration Tools, Manage Computer and Task Manager
    for running of SQL SERVER.
    I stop SQLEXPRESS instance in one of the above tools but the others become unaware of the latest changes except
    Task Manager.
    For example when I stop SQL EXPRESS from within SQL Server Congiguration Manager
    it still seems working in Windows Administration Tools, Manage Computer windows.
    What is the reason for this?

    Hi,
    Aprat from SQL Server configuration manager all other are windows tool and should not be used to manage SQL Server in anyway. Although I cannot completely understand list of tools you mentioned
    Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
    My Technet Wiki Article
    MVP

  • Netpoint BussinessOne Syych Manager , Error occues at Server Config

    I am getting an error at when click on try connection button of Server Config
    First Error
    Error: COM object with CLSID {A355004F-AAB4-41D3-BDE0-7EAED1ED5FFF} is either not valid or not registered.
    Second Error
    I also get an error when clicking on install Plugin button
    Error: Object reference not set to an instance of object
    Any clue on what could cause these errors
    Sincerely yours
    Riade Asleh

    Which version of Web tools are you using and which version of the DI API?
    This error occurs when data is being inserted into Business One by he DI API and the inserted data has more characters than the field will hold (typically it will happend on varchar or nvarchar fields).
    The "try connection" button attempts to create a company object in the DI API and connect to the specified company.  So the error is a bit strange in this context.

  • CUIC datasource for CVP Reporting server

    Hello,
    I have a CVP Reporting Server that was running for a while. I also have CUIC installed and I was able to generate IVR reports using the CVP templates. Suddenly, I see that the CVP Reporting Server in CUIC Datasources is OFFLINE.
    Given that nothing has been changed, what could be the issue? Does the cvp_dbuser expire?
    I am getting the following error in CUIC:
    Attempt to connect to database server (cvp_db_<rpt_server_hostname>) failed.
    Any advice is highly appreciated.
    Thanks,
    Justine.

    Thanks David for the fast and helpful reply.
    Even though the correct license file was applied (cisco 8.0 permanent uncounted) to the Reporting Server, I can see in the CVP Reporting Server's Error log that the license had expired.
    RPT_EVAL Component license already expired on ...
    I can also see the license file in the managed license files in CVP Operations Console.
    I tried to re-transfer the same file but couldn't, Reporting Server is unreachable.
    Failed - Device could not be reached
    Any suggestions?
    Thanks,
    Justine.

Maybe you are looking for

  • Can not read file from URL

    I have this code for loadbitmap() function: String s = getCodeBase()+sdir+sfile; System.out.println("codeBase is=" + s); URL url = new URL(s); InputStream fs = url.openStream(); BufferedInputStream bs = new BufferedInputStream(fs); And the file is a

  • PO Output messages for ECS PO's

    We are on SRM_SERVER 550, SAP 4.7 backend and are moving to ECS scenario (from Classic scenario). Although we cannot change the ECS PO copy in R/3, I want to know if we can add new message types in the ECS PO copy which is stored in R/3 Does R/3 allo

  • BTE Name in Called Function Module

    Hello, A function module say XYZ is called from a BTE. Can I know the name of the BTE which called the function module XYZ inside the function module XYZ ? With Regards, Avisesh.

  • Unable to load HP LaserJet p1606DN driver in Broker

    I am trying to load up a HP p1606DN driver into my broker. The load process fails. Other drivers load fine. The load fails if I try to load the driver from disk, or if I try to pull it from my PC. The error message happens so fast I can not read it.

  • SQL Server Free Text Search with multiple search words inside a stored procedure

    I am trying to do a free text search. basically the search string is being sent to a stored procedure where it executes the free text search and returns the result. If I search for red flag, I want to return the results that matches both red and flag