CVP Upgrade 7.0.2 to 8.5 Bridge Upgrade

We are planning to upgrade CVP 7.x --- > 8.0 ---- > 8.5 from MCS/physical platform to virtual platform ( UCS). Could you please share your upgrade experience and steps specially for reporting server? We wanted to use new hostnames and IP address for new cvp boxes
Thanks in Advance

UCCX version 8.0.2.11005-20 [8.0(2) SU2] can be upgraded to 8.5(1)SU1
Have u selected the correct path in sftp where 8.5(1) SU1 is kept and sftp.exe is running?
regds,
aman

Similar Messages

Upgrade fails in the phase STARTSAP_TBUPG during the upgrade of CRM 4 to 5

Hello,
Upgrade failed with the below message in the upgrade phase STARTSAP_TBUPG during the upgrade of CRM 4.0 to CRM 5.0
Error Message:
SYSTEM START failed, code -1
             -1: 'startsap.exe' returned an error
             See file 'D:\usr\sap\put\log\R3up.ECO' for details.
R3up.ECO:
SAPup> Starting subprocess startsap.exe with id 5844 at 20080402142258
EXECUTING D:\usr\sap\put\exe\startsap.exe name=SID nr=00 SAPDIAHOST=Hostname
Environment: dbms_type=mss
Environment: dbs_mss_schema=cdu
STARTSAP failed
Details are written to D:\usr\sap\put\tmp\startSID.log
Process with ID 6276 terminated with status -1
startSID.log
running D:\usr\sap\put\exe\sapstart.exe name=SID nr=00 SAPDIAHOST=Hostname -wait
SAPSTART finished successfully on Host_SID_00, but at least one process doesn't run correctly:
     msg_server.exe, MessageServer, Running, 2008 04 02 14:22:58, 0:03:19
     disp+work.exe, Dispatcher, Running, Message Server connection ok, Dialog Queue time: 0.00 sec, 2008 04 02 14:22:58, 0:03:19
     igswd.exe, IGS Watchdog, Stopped, 2008 04 02 14:22:58, 0:00:00
D:\usr\sap\put\exe\sapstart.exe=>sapparam(1c): No Profile used.
It is trying to start the shadow instance and failing by ending all the work process
DEV_DISP:
trc file: "dev_disp", trc level: 1, release: "700"
sysno      01
sid        SID
systemid   560 (PC with Windows NT)
relno      7000
patchlevel 0
patchno    150
intno      20050900
make:      multithreaded, ASCII, optimized
pid        5348
Wed Apr 02 17:22:10 2008
kernel runs with dp version 234(ext=109) (@(#) DPLIB-INT-VERSION-234)
length of sys_adm_ext is 364 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (01 5348) [dpxxdisp.c   1245]
     shared lib "dw_xml.dll" version 150 successfully loaded
     shared lib "dw_xtc.dll" version 150 successfully loaded
     shared lib "dw_stl.dll" version 150 successfully loaded
     shared lib "dw_gui.dll" version 150 successfully loaded
     shared lib "dw_mdm.dll" version 150 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
Wed Apr 02 17:22:22 2008
WARNING => DpNetCheck: NiHostToAddr(www.doesnotexist0100.qqq.nxst) took 12 seconds
Wed Apr 02 17:22:40 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 18 seconds
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5373]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >HOSTNAME_SID_01                      <
DpShMCreate: sizeof(wp_adm)          22968     (1044)
DpShMCreate: sizeof(tm_adm)          3642120     (18120)
DpShMCreate: sizeof(wp_ca_adm)          18000     (60)
DpShMCreate: sizeof(appc_ca_adm)     6000     (60)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
DpShMCreate: sizeof(comm_adm)          528048     (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm)          0     (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm)          0     (72)
DpShMCreate: sizeof(vmc_adm)          0     (1296)
DpShMCreate: sizeof(wall_adm)          (22440/34344/56/100)
DpShMCreate: sizeof(gw_adm)     48
DpShMCreate: SHM_DP_ADM_KEY          (addr: 05560040, size: 4281040)
DpShMCreate: allocated sys_adm at 05560040
DpShMCreate: allocated wp_adm at 05561B30
DpShMCreate: allocated tm_adm_list at 055674E8
DpShMCreate: allocated tm_adm at 05567518
DpShMCreate: allocated wp_ca_adm at 058E0820
DpShMCreate: allocated appc_ca_adm at 058E4E70
DpShMCreate: allocated comm_adm at 058E65E0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 05967490
DpShMCreate: allocated gw_adm at 059674D0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 05967500
DpShMCreate: allocated wall_adm at 05967508
MBUF state OFF
DpCommInitTable: init table for 500 entries
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 2039 blocks reserved for free list.
ES initialized.
WARNING => System running without ICM - check rdisp/start_icman [dpxxdisp.c   12553]
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( HOSTNAME) [dpxxdisp.c   11867]
DpStartStopMsg: send start message (myname is >HOSTNAME_SID_01                      <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 40000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]
DpMsgAdmin: Set patchno for this platform to 150
Release check o.K.
Wed Apr 02 17:23:20 2008
my types changed after wp death/restart 0x1f --> 0x1e
my types changed after wp death/restart 0x1e --> 0x1c
my types changed after wp death/restart 0x1c --> 0x18
my types changed after wp death/restart 0x18 --> 0x10
my types changed after wp death/restart 0x10 --> 0x0
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1477
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Apr 02 17:23:30 2008
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long)               Wed Apr 02 11:53:30 2008
========================
No Ty. Pid      Status Cause Start Err Sem CPU    Time Program          Cl User         Action                    Table
0 DIA     6916 Ended         no      1   0        0
1 DIA     7724 Ended         no      1   0        0
2 DIA     6044 Ended         no      1   0        0
3 DIA     4300 Ended         no      1   0        0
4 DIA     6992 Ended         no      1   0        0
5 DIA     2412 Ended         no      1   0        0
6 DIA      432 Ended         no      1   0        0
7 DIA     8168 Ended         no      1   0        0
8 DIA     5420 Ended         no      1   0        0
9 DIA     9712 Ended         no      1   0        0
10 UPD     4320 Ended         no      1   0        0
11 ENQ     3476 Ended         no      1   0        0
12 BTC     2676 Ended         no      1   0        0
13 BTC     6816 Ended         no      1   0        0
14 BTC     9636 Ended         no      1   0        0
15 BTC     8356 Ended         no      1   0        0
16 BTC     7004 Ended         no      1   0        0
17 BTC     7284 Ended         no      1   0        0
18 BTC    10048 Ended         no      1   0        0
19 BTC     4560 Ended         no      1   0        0
20 BTC     4196 Ended         no      1   0        0
21 SPO     4268 Ended         no      1   0        0
Dispatcher Queue Statistics               Wed Apr 02 11:53:30 2008
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
1
2000
1
1
--------++++--
+
DIA
3
3
2000
3
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id          7
wake_evt_udp_now     0
wake events           total     3, udp     3 (100%), shm     0 ( 0%)
since last update     total     3, udp     3 (100%), shm     0 ( 0%)
Dump of tm_adm structure:               Wed Apr 02 11:53:30 2008
=========================
Term    uid man user    term   lastop mod wp ta   a/i (modes)
Workprocess Comm. Area Blocks               Wed Apr 02 11:53:30 2008
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1477
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Apr 02 17:23:35 2008
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >HOSTNAME_SID_01                      < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (1860) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:1860 HANDLE:1448)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1477
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Apr 02 17:23:36 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:1860 HANDLE:1448)
DpStartStopMsg: send stop message (myname is >HOSTNAME_SID_01                      <)
NiIMyHostName: hostname = 'HOSTNAME'
AdGetSelfIdentRecord: >                                                                           <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name                    -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIRead: read for hdl 2 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name           MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 2 (r)
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER          , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
Wed Apr 02 17:23:37 2008
NiIPeek: peek for hdl 2 timed out (r; 1000ms)
NiIRead: read for hdl 2 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c   12213]
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
SiSelNSet: set events of sock 1356 to: ---
NiBufISelRemove: remove hdl 2 from set0
SiSelNRemove: removed sock 1356 (pos=2)
SiSelNRemove: removed sock 1356
NiSelIRemove: removed hdl 2
MBUF state OFF
AdGetSelfIdentRecord: >                                                                           <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/22
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 9)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 2 / sock 1356
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 5348) [dpxxdisp.c   10461]
Good Bye .....
Please help me in resolving this issue
Thanks,
Vadi

Hi Suhas,
Have checked the hostname and it is correct.
I am getting the below output When i run r3trans -x
This is r3trans version 6.14 (release 700 - 04.03.08 - 16:43:00).
r3trans finished (0000).
I could see the below error message in dev_W21
ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 'sid_shd' setuser 'sid_shd']
C sloledb.cpp [ExecuteAndFlush,line 6470]: Error/Message: (err 15157, sev 0), Setuser failed because of one of the following reasons: the database principal 'cdu_shd' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission.
C Procname: [ExecuteAndFlush - no proc]
C setuser 'cdu_shd' failed -- connect terminated
C failed to establish conn. 0
Thanks,
Vadi

HT1386 After upgrading iTunes to 10.7.0.24 and upgrading my iPad to 6.0.1 WiFi Sync no longer works.

After upgrading iTunes to 10.7.0.24 and upgrading my iPad to 6.0.1 WiFi Sync no longer works.
Followed the FAQ's on the Apple Support but no joy.
Anyone knows what more I can do?

In iTunes under the Store tab try Authorizing the Computer

I have just upgraded to Windows 8 and my scyning and upgrading my phone with new apple software fails, Itunes looses connection with the device (phone), cant backup the phone or download new software, is this an issues with Windows 8?

I have just upgraded to Windows 8 and my scyning and upgrading my phone with new apple software fails, Itunes looses connection with the device (phone), cant backup the phone or download new software, is this an issues with Windows

Hi, stig2013.
I would recommend the steps in the article below. See the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
If you are receiving an error message, find the exact error number that you recieved in the article below and process the steps.
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if you manually disconnect the device during the restore process. You can resolve this issue by using USB troubleshooting, using a different Dock Connector or Lightning Connector to USB cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.
Cheers,
Jason H.

Just upgraded to 10.6.8. Had to upgrade Adobe flash player. Now can't get any sound from websites!

Just upgraded to 10.6.8. Had to upgrade Adobe flash player. Now can't get any sound from websites. Advice please!

Check System Preferences > Flash Player > Advanced
Click: Delete All under Browsing Data and Settings
Then empty the Safari cache.
From your Safari menu bar click Safari > Preferences then select the Advanced tab.
Select: Show develop menu in menu bar
Now click Develop > Empty Caches
Quit and relaunch Safari then try Flash on a website for sound.

R12.1.1 / 11.1.0.7 upgrade : Error with 10.1.3.4 patchset upgrade

All,
We are on 12.0.2 / 10.2.0.2 (non-rac) in a split-tier architecture. Web/Forms on the Linux node and Concurrent Managers/Database on the Solaris node. We are now on a project to upgrade this environment to 12.1.1 on 11.1.0.7 db. (Non RAC,Non ASM)
Here are the high level tasks that i laid down
-- Create a project instance (clone from Prod)
-- Upgrade db to 10.2.0.4 from 10.2.0.2
-- Upgrade the techstack Oracle Homes (10.1.2 and 10.1.3)
-- Upgrade the JDK to 1.6.0_X
-- Upgrade 12.0.2 to R12.1.1
-- Upgrade the database to 11.1.0.7
PS: Direct ugprade from 10.2.0.2 to 11.1.0.7 needs us to be on R12 RUP4. So, i decided to do 10g upgrade as an intermediate step. We are following 752619.1 and all the notes that it refers.
We are hitting an issue upgrading the 10.1.3 Oracle home on the Solaris node. The same upgrade completed fine on the Linux node. Here is the description of the issue.
The runInstaller for 10.1.3.4 patchset expects OPMN to be running for a successful patchset installation. On a node with just batch processing enabled, OPMN does not run by default. The installer tries to start OPMN and errors out saying
========
OPMN is failing to start. OPMN must be started in order to correctly install and configure the patchset. Please start OPMN ma
nually in order to continue with the patchset installation.
=========
This is when the installer is at 83%
We tried to start OPMN and managed processes manually using adopmnctl.sh
OPMN starts and is able to start the HTTP server too but not any of the OC4J container components (oacore,forms and oafm). Here are the errors
==========
ias-instance id=afcprj_swafcdev1.swafcdev1.sherwin.com
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
default_group/oacore/default_group/
Error
--> Process (index=1,uid=1861636864,pid=17677)
failed to start a managed process after the maximum retry limit
Log:
/swafc/applmgr/afcprj/inst/apps/afcprj_swafcdev1/logs/ora/10.1.3/opmn/default_gr
oup~oacore~default_group~1
ias-component/process-type/process-set:
default_group/forms/default_group/
=========
The logfile that it points to does not have any errors. Looking into the other log files within $LOG_HOME/ora/*3/
, we get the following error in oacorestd.err
=========
09/10/05 16:07:10 Error initializing server: Shared library "oracle.ws.jaxrpc" could not be found.
09/10/05 16:07:15 Error: <connector name="OracleASjms" path="OracleASjms.rar" /> will not be bootstrapped since corresponding module declaration was not found in application.xml.
09/10/05 16:07:17 Error initializing server: Shared library "oracle.ws.jaxrpc" could not be found.
========
I saw some notes and tried updating the config xml files and removed the references to oracle.ws.jaxrpc but to no help.
Installer log has the below error when we attempt the "retry" operation in installation screens.
========
fileName = NonExistentFile
searchString = NonExistentString
Query Exception: FileNotFoundException
Query Exception Class: class oracle.sysman.oii.oiil.OiilQueryException
Query Exception: FileNotFoundException
Query Exception Class: class oracle.sysman.oii.oiil.OiilQueryException
===========
Any help on the above issue? We are never going to use OPMN on this node but stuck here currently !!
Deviating a little bit, if we have to consider moving the concurrent managers out of database node to the
web/forms node (just to avoid having to maintain 2 appl_tops and getting away with doing the above tasks 2 times)
, what are the various things to consider?
-- Network latency
-- R12 being Unified APPL_TOP, can we just try to bring up ICM on Web/Forms node? (just enable the service)
-- We are aware that we might have to move the custom top and test custom programs (especially host programs).
Is there any other considerations when moving Concurrent managers from a Solaris node(64 bit) to Linux node (32 bit) ?
One last question: Why are these adoacore/adoafm scripts taking a long time?
Any feedback is highly appreciated.
Thanks,
Arun

Hi,
Error
--> Process (index=1,uid=1861636864,pid=17677)
failed to start a managed process after the maximum retry limit
Log:
/swafc/applmgr/afcprj/inst/apps/afcprj_swafcdev1/logs/ora/10.1.3/opmn/default_gr
oup~oacore~default_group~1
ias-component/process-type/process-set:
default_group/forms/default_group/Please try the suggested solution in Note: 555214.1 and see if it helps.
Query Exception: FileNotFoundException
Query Exception Class: class oracle.sysman.oii.oiil.OiilQueryExceptionCould you please verify that permissions are set correctly on the application tier node files?
-- R12 being Unified APPL_TOP, can we just try to bring up ICM on Web/Forms node? (just enable the service)Please see (Note: 373611.1 - How to move Concurrent Processing Server from one node to another node) -- Step 3 to 7
-- We are aware that we might have to move the custom top and test custom programs (especially host programs).
Is there any other considerations when moving Concurrent managers from a Solaris node(64 bit) to Linux node (32 bit) ?I would suggest you relink all executable files via adadmin and check then.
Regards,
Hussein

IPhone 5 doesn't work with Mac OS 10.5.8 - do I need to ugrade to 10.6 and then upgrade to Mountain Lion or can I just upgrade to Mtn Lion right away?

iPhone 5 doesn't work with Mac OS 10.5.8 - do I need to ugrade to 10.6 and then upgrade to Mountain Lion or can I just upgrade to Mtn Lion right away?

At least to 10.6.8. You must do this to upgrade to Mountain Lion.
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s iCloud services; fees and
           terms apply.
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mountain Lion - System Requirements
       Macs that can be upgraded to OS X Mountain Lion
         1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
         7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
     Are my applications compatible?
         See App Compatibility Table - RoaringApps.

Has anyone had any luck viewing upgrade prices on devices on myverizon before their upgrade date?

I have a single line account whose upgrade date is tomorrow, 8/30/2013, yet when I go to the upgrade my device option on Myverizon, all I can see in the way of device prices are full retail prices...no discounted prices or free phones for contract extensions. I did a live chat with a customer service rep who told me it was because 'prices are always changing." Why then, can I see the upgrade prices/deals on OTHER companies websites (ie bestbuy.com & samsclub.com)?? Don't their prices change as well?
My sister, who is also a Verizon customer has a family plan with 5 lines. She was able to see upgrade prices on TWO of her lines a week before their eligible upgrade dates AND upgraded early. Perhaps because she has 5 lines and pays a bigger bill she gets better service than I do?
I've been a customer since LA Cellular, who sold to Airtouch (back in the mid 1990's) who then sold to Verizon...I've had the same phone # and provider for close to 18 years and feel that this is not a great way to treat any customer.The same thing happened to me when I upgraded in 2011. I actually ended up upgrading with Best Buy almost a week before my upgrade date. I didn't want to do that this time, because I had technical issues with my phone and had to get a new one (through Best Buy's warranty...Verizon wouldn't honor the manufacturer warranty because I did not buy the phone from them) Best Buy & Verizon screwed up my data plan, causing me to lose 2 GB of data each month. ( I was on promotional 4GB of data for price of 2 GB, which did not get translated between Best Buy & Verizon when my phone was replaced.
Has anyone else ever been able to view their upgrade prices on myverizon before their actual upgrade date? It's a moot point for me after tomorrow, but I plan to complain to their corporate customer service and any additional ammunition would be very helpful.

Because you're not yet eligible for upgrade. View the devices while not signed in and it will show 2 yr pricing by default.

I've upgraded to Yosemite. Iphoto is out of date and won't open. I'm being directed to the app store for a free upgrade but there is nothing there. being told 'upgrade is not available in the US'

I've upgraded to Yosemite. Iphoto is out of date and won't open. I'm being directed to the app store for a free upgrade but there is nothing there. being told 'upgrade is not available in the US'

iPhoto is no longer available from the Mac App Store. Update to 10.10.3 and use Photos.
(125792)

I am running Acrobat Pro 9 (9.5.5). Do we have to purchase the new version if we have never upgraded? Or are we entitled to an upgrade to the latest version.

I am running Acrobat Pro 9 (9.5.5). Do we have to purchase the new version if we have never upgraded? Or are we entitled to an upgrade to the latest version.

I am not really clear on the intention of your question. If you are going to get the latest version you are going to purchase it. When you go to purchase it you should be able to see if there is an option to purchase it as an upgrade from the version you currently have. I cannot find the purchase page to check myself... I can only find the subscription option.

Upgrade to Solution Manager 7.1 missing Master upgrade DVD

Hi,
I'm upgrading Solution Manager 7.0 EHP1 to Solution Manager 7.1 . I've got the following error;
Please enter mount points for the DVDs required for the upgrade.
Enter at least the mount point containing "Upgrade master DVD"
I Can't find this "Upgrade master DVD" on market place. I've opend an OSS message but no answer yet. Anyone had that problem?
Thanks!

I had the same issue. It turns out that what it was really asking for was a SAP Kernel DVD in the correct format.
When I downloaded the SAP Kernel DVD from the Market Place, the Zip file included a directory for my platform at the first level on the DVD, and then in that directory it contains the LABEL.ASC file.
You need to ensure that when you stage the Kernel DVD, the LABEL.ASC files etc should be in the Top Level directory, or it won't be recognised as a DVD, and you'll get the erroneous message about needing an "Upgrade Export DVD" (which does not exist for Solman 7.1).
Hope this helps!

I have Lightroom 4.4 and a Nikon d800 with firmware upgrade 2.005. raw files are now since upgrade, unreadable. any plugins or advice? Thanks

I have Lightroom 4.4 and a Nikon d800 with firmware upgrade 2.005. raw files are now since upgrade, unreadable. any plugins or advice? Thanks

I select the images I want uploaded, NEF files, click the "IMPORT" button, process bar comes up and shows work in progress, but no progress. after about 2 minutes, dialogue box appears with message: "unable to import because the following files are unreadable: NEFxxxx, etc."

IPad 1 cannot upgrade to io6, but apps want me to upgrade to make them compatible with 6 - should I refuse the updates?

iPad 1 cannot upgrade to io6, but apps want me to upgrade to make them compatible and streamlinedwith 6 - should I refuse the updates? They don't say if they'll still run in an ios5 platform and I can't afford a new iPad if these upgrades make the iPad apps unusable on this machine. Thanks for any assistance!
Kelley

Having the same issue here. I unfortunately purchased a book on iTunes, then went to download iBooks, but can't due to their recent update/upgrade. My kids iTouchs are all 6.1.5 , So I'm guessing that if you did not have iBooks previously purchased that you are now S.O.L. if you want to read a book on your iPod??
I am rather frustrated that I spent money on a book that they can't read.
Is there another app that will let them read it?

Have lost iphoto images.after upgradewhich I quit.Quit/upgrade pop up keeps coming up. Press upgrade,does then returns to pop up same. Can I retieve iphotoshots?

I pressed for upgrade of my Iphoto, in a hurry, wouldn't usually just do this, anyway the pop up quit or upgrade keeps coming up. If I press upgrade it doesthis then the pop up returns saying to quit or upgrade... very circular. have no images coming up on my Iphoto when I had 1000's.your photo library will not be readable by previous versions of Iphoto.I had pressed quit....nothing happens..press upgrade the same message comes up. Can I recover my Iphoto pics and how? Can I revert to original Iphoto and library pre upgrade and how? Can I istlll something to upgrade Iphoto Library to make it compatible with Iphoto upgrade and retieve my Iphotos ?
Thanks

Whew, changes to iPhoto are ridiculous, but what OSX version are you on? 10.5.8?
Was any of iPhoto involved with an iPhone/iPad?
I'd get GraphicConverter...
http://www.lemkesoft.com/
Use it's powerful Btrowse Folder function to see what pics really exist.

I upgraded from PS5 to PS 6 and Bridge will not open in RAW, AMT Failure, also will let me update

I upgraded from PS5 to PS 6 and Bridge will not open in RAW, AMT Failure, also will not let me update and closes Bridge down.
I have uninstalled and reinstalled 3 times and still no success. Any suggestions?

What system are you on? Did you run the Creative Suite Cleaner Tool inbetween your install attempts? If not, try that to produce a "clean" install with factory defaults. Other than that there could be some specific system issues at play, but again, we'd need to actually know what system you are on...
Mylenium

CVP Upgrade 7.0.2 to 8.5 Bridge Upgrade

Similar Messages

Maybe you are looking for