CVS SSH Authentication Fails in XCode

I'm trying to set up XCode 2.5 to work with CVS over SSH. I can log into the CVS repository from Terminal, but when I give XCode the same login info it immediately reports "Authentication failed."
Can anyone tell me what I should look at to get this working?
Thanks,
Dave

svn info on the command line reports that it's svn+ssh, however XCode just wont connect.
I can connect fine on the command line.

Similar Messages

  • Authentication failed on device 3 times. Failed to detect SSH version running on the device. PRIMARY-STARTUP config Fetch Operation failed for TFTP

    I have devices loaded but new devices keep getting this error "Authentication failed on device 3 times. Failed to detect SSH version running on the device. PRIMARY-STARTUP config Fetch Operation failed for TFTP" - which trying to get configurations. I am using LMS 3.0.1
    I tried to TELNET on devices via Putty port 22 no good. Please help?
    Name Version License Status Size CiscoWorks  Common Services 3.1.1 Licensed Not applicable  Campus  Manager 5.0.3 Purchased 1500  CiscoView 6.1.7 Licensed Not applicable  CiscoWorks  Assistant 1.0.1 Licensed Not applicable  Device  Fault Manager 3.0.3 Purchased 1500  Internetwork  Performance Monitor 4.0.1 Purchased 1500  Integration  Utility 1.7.1 Licensed Not applicable  LMS  Portal 1.0.1 Licensed Not applicable  Resource  Manager Essentials 4.1.1 Purchased 1500

    Showing 1-1 of 1 records
    Go to page:
    of 1 pages
    Device Name
    SysObjectID
    Model
    Device Status
    Inventory Status
    Inventory Last Updated Time
    Config Status
    Config Last Updated Time
    1.
    R2020012_01
    .1.3.6.1.4.1.9.1.576
    Cisco 2811 Integrated Services Router
    Normal
    Success
    Jan 13 2011 10:43:49 EST
    Failed
    Jan 13 2011 10:37:24 EST
      Rows per page:
    20 50 100 500
    Go to page:
    of 1 pages

  • Authentication Failed - Control or Observe

    First things first... this is what I have:
    ARD Admin: 17" MacBook Pro running 10.5.1 and ARD 3.2
    Want to control: Mirror Door PowerMac G4 with 10.4.11 and ARD client version 3.2.1
    I had the same problem prior to updates and upgrading my OS to 10.5. I can manage this computer, and share my screen with it. But I cannot observe or control it. When I try this, I receive Authentication Failed.
    I have tried re-installing the client via kickstart on the client machine. I have uninstalled all privs and settings via kickstart. I have also reset all these settings and restarted the menu, console, and agent.
    On my MBP I have removed the computer and re-added it many times. I have checked all settings on the client... flushed dns cache... fixed any network problems... verified that firewall is not turned on. I even cleaned all caches and ran maintenance on it.
    All of this I have done, and I keep receiving the same error message. Does anyone have any other ideas... I guess I could re-install the system, but I'd rather not have to do that.
    Thanks,
    Ken

    I lost access to two of my clients as well. Could see them in scanner and they even showed up as available, light blue, but I could not control or observe. So the following fixed the problem for me.
    Open terminal:
    ssh shortusername@ipaddress for specific client
    rm -rf /var/db/RemoteManagement
    rm /Library/Preferences/com.apple.RemoteDesktop.plist
    rm ~/Library/Preferences/com.apple.RemoteDesktop.plist
    rm -r /Library/Application\ Support/Apple/Remote\ Desktop/
    rm -r ~/Library/Application\ Support/Remote\ Desktop/
    Then create special ARD client install package with ARD admin app with all the settings configured. I don’t know how to install and run the package via ssh so I just emailed it to the client and had them open the package and run the install.
    It worked for me, I now have access to the clients that I lost access to (verify failed)

  • SSH getting failed freqently in ASA 5510

    Hi ,
    I been able to access the firewall via ssh, but suddenly ssh got failed but able to telnet port 22 to the firewall. But it is not prompting username and password from the ASA device. So i have taken console reset all ssh configuration , then SSH started to working but after few minutes it stop to work.
    My version : Version 8.2(3)

    Hi
    Log taken while trying to connect the ssh from the inside
    Able to take ssh from INSIDE LAN but not able to take ssh from outside port.
    Oct 06 2003 02:04:46: %ASA-6-302013: Built inbound TCP connection 66468 for INSIDE:172.**.**.144/49624 (172.**.**.144/49624) to identity:172.**.**.130/22 (172.**.**.130/22)
    Oct 06 2003 02:04:56: %ASA-6-113012: AAA user authentication Successful : local database : user = A***Z
    Oct 06 2003 02:04:56: %ASA-6-113008: AAA transaction status ACCEPT : user = A***Z
    Oct 06 2003 02:04:56: %ASA-6-611101: User authentication succeeded: Uname: A***Z
    Oct 06 2003 02:04:56: %ASA-6-611101: User authentication succeeded: Uname: A***Z
    Oct 06 2003 02:04:56: %ASA-6-605005: Login permitted from 172.**.**.144/49624 to INSIDE:172.**.**.130/ssh for user "A***Z"
    Log taken while trying to connect the ssh from the outside
    1Oct 06 2003 02:09:03: %ASA-6-302013: Built inbound TCP connection 66669 for outside:103.**.**.70/29691 (103.**.**.70/29691) to identity:142.**.**.45/22 (142.**.**.45/22)
    Here it is not asking user name while trying to connected from the outside but connection got establish upto Handshake and that firewall not sending the data to the client for the username.
    10:52 PMProtocol  Socket    Local Address               Foreign Address         State
    TCP       4c50f36f  142.**.**.45:22             0.0.0.0:*               LISTEN
    TCP       4c58baef  172.**.**.130:22            0.0.0.0:*               LISTEN
    TCP       4c599198  142.**.**.45:22             103.**.**.70:29610     ESTAB
    TCP       4c5affc8  172.**.**.130:22            172.**.**.144:49616     ESTAB

  • OSB: SFTP transport Authentication Failed

    I am not able upload file to sftp. known_hosts file is set and configured correctly. Service account is static and ok.
    Result: The invocation resulted in an error: Authentication Failed.
    Sshd: Remote sftp server: SSH-1.99-OpenSSH_3.8p1
    Osb-Client: SSH-2.0-http://www.sshtools.com J2SSH [CLIENT]

    Either you have provided incorrect password or SFTP server is configured with certificate authentication. Cross check.
    Regards,
    Anuj

  • FreeNX - SSH Authentication Problem

    Hi there,
    I installed freenx following the wiki and got it up and running. Using the usermode authentication (logging in as user nx) works, but i want to be able to login using my local username via ssh.
    So I disabled the usermodeauthentication and enabled ENABLE_SSH_AUTHENTICATION="1". In my sshd config I put PasswordAuthentication yes and changed the ports in both, the sshd and node conf files accordingly.
    I can login tvia ssh using putty and filezilla from a windows computer, but I cannot login using NX Client.
    Using NX Client it fails giving me an "Authentication failed". The log on the FreeNX server says wrong username or password.
    Any ideas what's wrong ?
    Last edited by Votan (2010-11-19 22:31:42)

    The log on the FreeNX server says wrong username or password.
    Read the wiki - https://wiki.archlinux.org/index.php/Fr … n_possible
    * If you get wrong password or login, put ENABLE_PASSDB_AUTHENTICATION="1" in /opt/NX/etc/node.conf and add a user by
    # /opt/NX/bin/nxserver --adduser [username]
    # /opt/NX/bin/nxserver --passwd [username]

  • Server 3 - SSH login failing too.

    So, Server 3 has broken the ability for Network Users to logon to the server and now I discover SSH logons are failing too.
    Also, if you'd configured SSH to run on a port other than 22, I suspect Server 3 has changed that configuration file.
    Personal recommendation:
    Do not upgrade to Server 3.
    If your upgrade worked I'd be interested to know.

    Here are exceprts for the configuration:
    aaa new-model
    aaa authentication login default group tacacs+ local enable
    aaa authentication login userauthen1 local
    aaa authentication login acs-rad group radius local
    aaa authentication ppp default local
    aaa authorization exec default group tacacs+ local
    aaa authorization network default group tacacs+ local
    aaa authorization network groupauthor local
    aaa authorization network groupauthor1 local
    aaa accounting exec acct start-stop group tacacs+
    aaa accounting exec acc-exec start-stop group tacacs+
    aaa session-id common
    ip ssh time-out 15
    ip ssh authentication-retries 5
    ip ssh version 2
    line aux 0
    no exec
    transport input all
    transport output all
    stopbits 1
    speed 115200
    line vty 0 4
    length 45
    transport preferred none
    transport input ssh
    line vty 5 13
    transport input ssh
    line vty 14 15
    session-timeout 60
    access-class IPSec-Mgt in
    exec-timeout 60 0
    transport input all
    display from show ip ssh command:
    SSH Enabled - version 2.0
    Authentication timeout: 15 secs; Authentication retries: 5
    There are other routers on the network with the exact same configuration as far as ssh is concerned that work fine...

  • SSH Login Failing

    When attempting to ssh into the router the connection is never established..please see the following debug output:
    5494365: Jul 14 18:44:18.769 UTC: SSH0: starting SSH control process
    5494366: Jul 14 18:44:18.769 UTC: SSH0: sent protocol version id SSH-2.0-Cisco-1.25
    5494367: Jul 14 18:44:18.769 UTC: SSH0: protocol version id is - SSH-2.0-SecureCRT_6.2.2 (build 263) SecureCRT
    5494368: Jul 14 18:44:18.769 UTC: SSH2 0: send: len 280 (includes padlen 4)
    5494369: Jul 14 18:44:18.769 UTC: SSH2 0: SSH2_MSG_KEXINIT sent
    5494370: Jul 14 18:44:18.893 UTC: SSH2 0: ssh_receive: 464 bytes received
    5494371: Jul 14 18:44:18.893 UTC: SSH2 0: input: packet len 464
    5494372: Jul 14 18:44:18.893 UTC: SSH2 0: partial packet 8, need 456, maclen 0
    5494373: Jul 14 18:44:18.893 UTC: SSH2 0: input: padlen 9
    5494374: Jul 14 18:44:18.893 UTC: SSH2 0: received packet type 20
    5494375: Jul 14 18:44:18.893 UTC: SSH2 0: SSH2_MSG_KEXINIT received
    5494376: Jul 14 18:44:18.893 UTC: SSH2: kex: client->server aes256-cbc hmac-sha1 none
    5494377: Jul 14 18:44:18.893 UTC: SSH2: kex: server->client aes256-cbc hmac-sha1 none
    5494378: Jul 14 18:44:18.941 UTC: SSH2 0: expecting SSH2_MSG_KEXDH_INIT
    5494379: Jul 14 18:44:18.941 UTC: SSH2 0: ssh_receive: 144 bytes received
    5494380: Jul 14 18:44:18.941 UTC: SSH2 0: input: packet len 144
    5494381: Jul 14 18:44:18.941 UTC: SSH2 0: partial packet 8, need 136, maclen 0
    5494382: Jul 14 18:44:18.941 UTC: SSH2 0: input: padlen 5
    5494383: Jul 14 18:44:18.941 UTC: SSH2 0: received packet type 30
    5494384: Jul 14 18:44:18.945 UTC: SSH2 0: SSH2_MSG_KEXDH_INIT received
    5494385: Jul 14 18:44:19.005 UTC: SSH2 0: RSA_sign: private key not found
    5494386: Jul 14 18:44:19.005 UTC: SSH2 0: signature creation failed, status -1
    5494387: Jul 14 18:44:19.105 UTC: SSH0: Session disconnected - error 0x00
    5494388: Jul 14 18:44:24.361 UTC: SSH0: starting SSH control process
    5494389: Jul 14 18:44:24.361 UTC: SSH0: sent protocol version id SSH-2.0-Cisco-1.25
    5494390: Jul 14 18:44:24.361 UTC: SSH0: protocol version id is - SSH-2.0-SecureCRT_6.2.2 (build 263) SecureCRT
    5494391: Jul 14 18:44:24.361 UTC: SSH2 0: send: len 280 (includes padlen 4)
    5494392: Jul 14 18:44:24.365 UTC: SSH2 0: SSH2_MSG_KEXINIT sent
    5494393: Jul 14 18:44:24.561 UTC: SSH2 0: ssh_receive: 464 bytes received
    5494394: Jul 14 18:44:24.561 UTC: SSH2 0: input: packet len 464
    5494395: Jul 14 18:44:24.561 UTC: SSH2 0: partial packet 8, need 456, maclen 0
    5494396: Jul 14 18:44:24.561 UTC: SSH2 0: input: padlen 9
    5494397: Jul 14 18:44:24.561 UTC: SSH2 0: received packet type 20
    5494398: Jul 14 18:44:24.561 UTC: SSH2 0: SSH2_MSG_KEXINIT received
    5494399: Jul 14 18:44:24.565 UTC: SSH2: kex: client->server aes256-cbc hmac-sha1 none
    5494400: Jul 14 18:44:24.565 UTC: SSH2: kex: server->client aes256-cbc hmac-sha1 none
    5494401: Jul 14 18:44:24.613 UTC: SSH2 0: expecting SSH2_MSG_KEXDH_INIT
    5494402: Jul 14 18:44:24.613 UTC: SSH2 0: ssh_receive: 144 bytes received
    5494403: Jul 14 18:44:24.613 UTC: SSH2 0: input: packet len 144
    5494404: Jul 14 18:44:24.613 UTC: SSH2 0: partial packet 8, need 136, maclen 0
    5494405: Jul 14 18:44:24.613 UTC: SSH2 0: input: padlen 6
    5494406: Jul 14 18:44:24.613 UTC: SSH2 0: received packet type 30
    5494407: Jul 14 18:44:24.613 UTC: SSH2 0: SSH2_MSG_KEXDH_INIT received
    5494408: Jul 14 18:44:24.677 UTC: SSH2 0: RSA_sign: private key not found
    5494409: Jul 14 18:44:24.677 UTC: SSH2 0: signature creation failed, status -1
    5494410: Jul 14 18:44:24.777 UTC: SSH0: Session disconnected - error 0x07
    Any ideas what this could be?

    Here are exceprts for the configuration:
    aaa new-model
    aaa authentication login default group tacacs+ local enable
    aaa authentication login userauthen1 local
    aaa authentication login acs-rad group radius local
    aaa authentication ppp default local
    aaa authorization exec default group tacacs+ local
    aaa authorization network default group tacacs+ local
    aaa authorization network groupauthor local
    aaa authorization network groupauthor1 local
    aaa accounting exec acct start-stop group tacacs+
    aaa accounting exec acc-exec start-stop group tacacs+
    aaa session-id common
    ip ssh time-out 15
    ip ssh authentication-retries 5
    ip ssh version 2
    line aux 0
    no exec
    transport input all
    transport output all
    stopbits 1
    speed 115200
    line vty 0 4
    length 45
    transport preferred none
    transport input ssh
    line vty 5 13
    transport input ssh
    line vty 14 15
    session-timeout 60
    access-class IPSec-Mgt in
    exec-timeout 60 0
    transport input all
    display from show ip ssh command:
    SSH Enabled - version 2.0
    Authentication timeout: 15 secs; Authentication retries: 5
    There are other routers on the network with the exact same configuration as far as ssh is concerned that work fine...

  • FreeNX - Authentication failed.

    Hi, I installed Freenx by pacman and I get this in a windows client:
    NX> 203 NXSSH running with pid: 4856
    NX> 285 Enabling check on switch command
    NX> 285 Enabling skip of SSH config files
    NX> 285 Setting the preferred NX options
    NX> 200 Connected to address: 91.117.182.217 on port: 22
    NX> 202 Authenticating user: nx
    NICE TO SEE YOU AGAIN FRIEND!!!
    NX> 208 Using auth method: publickey
    NX> 204 Authentication failed.
    I was looking in the freenx arch wiki post, but I cant solved my problem
    Tell me what you need to help me, thanks

    I found this on the nomachine web
    2.5. Getting the Node to Authenticate the Server
    The NX Server public DSA Key must be added to the node to allow this server to connect to the node running on the remote host. Please note that in the current implementation, each node can be associated only to one server.
    Copy the server public DSA key on the node host, for example:
    # scp /usr/NX/etc/keys/node.localhost.id_dsa.pub root@node_host:/tmp
    The general form of the command to add the server public DSA key is:
    nxnode --keyadd KEY
    KEY is the path to the server public DSA key.
    For example:
    nxnode --keyadd /tmp/node.localhost.id_dsa.pub
    I don't know if it works on FreeNX or even if this is the solution... I dont understand what to do

  • SAP Business One Integration Services Authentication Failed

    Dear ,
    ALL SAP forum members,
    Iam Using SAP Business One 8.81 PL 06, Micorsoft SQL 2008 R2
    In SLD B1DI and  JDBC, the connections were tested successfully.
    Whenever I log into SBO, I am getting "SAP Business One Integration Services Authentication Failed" error message. I did extensive research on all possible SBO documents dating 1 year back especially in B1ic Troubleshooting Document (New and Old) and searched the length of the SBO forums, but I could not a solution.
    I uninstalled and reinstalled the B1f package many a time. The integration services we re also restarted many times and the connections were all tested successfully. Firewall, AntiVirus also checked.
    In the B1f, in the Monitoring Window, the login is "Ok" but the AuthCheck is "Failed". I checked Authent.Monitor->Authentic Info  and I found the following message under Action message "Wrong Usrname and Password".
    I debugged and i found again "/com.sap.b1i.vplatform.scenarios.authen/sap.Xcelsius/Authenticate_Check.bfd
    But could not understand much of it.
    But i could go no further. The experts are requested to suggest their solutions, If any, to me as Iam stuck in this phase for the last 3 week
    I hope some experts will guide me over this issue
    Thanks and regards
    Ashish Gupte

    Hi Konstantin Ryahovsky
    Thanks for your reply. My problem is solved.
    And frankly speaking i dont know how it was solved. I have not uninstall, install ,not even i had restarted the server also.
    only change i did in SLD >> Maintainance >>> cfg Runtime >>>> Put server IP address instead of server Name and restarted the services.
    Thanks & regards
    Ashish Gupte

  • Toshiba EXCITE Pro - WIFI connection. Authentication failed after update

    Hello.
    Just received this Tablet.
    Everything seemed ok while updating to the latest version (did that first to solve the heat problems).
    After the last update *i lost my WIfi connection. Authentication failed* (didnt change something - was connecting - updating ok 1 minute before the last update).
    After that i started testing ,Wps connection , No security Wifi etc etc.
    *Finally at a random time (and with the initial settings) i got connected*. After i shut down the tablet the same problem occured.
    After doing the same things again i finally got connected and this time it seems to be ok, even after i shut down the tablet.
    However this is frustrating.
    Maybe you have to sort this out?
    I have seen and other people returning this tablet after having this problem.
    It is not a hardware problem since its working ok before the update.
    Of course tried factory reset twice.
    Hope i dont have this problem again, *but i am informing in hope that you fix this in a future update.*

    Toshiba sent me the fix for this. Figured I would use Facebook and they sorted a solution straight away.
    It requires a complete reset. Not the soft reset from within Android.
    I'll post it here as they will check through moderation I guess.
    Thanks for sending a private message Ben. For us to get this resolved for you we would advise to perform a reset from the Android system recovery menu, to do the reset please follow these steps:
    The reset process will delete any data, settings, and applications on your tablet. You must have a backup of any data you wish to keep before proceeding.
    1. Make sure the tablet is off and not in standby.
    2. Hold down the Volume Up and Power buttons simultaneously until the two Android icons appear.
    3. Use the volume buttons to select the white box on the right.
    4. Once selected, press the power button.
    5. Use the volume buttons to select wipe cache partition and then press the power button.
    6. Select Yes and press the power button.
    7. Use the volume buttons to select wipe data/factory reset and then press the power button.
    8. Select Yes and press the power button.
    9. The tablet will now reset.
    If you have any issues after the reset please get back to us as soon as possible!
    Its been working well ever since. I guess the cache clean part might be the main one. You'll have to select the reboot yourself as I did at the end.
    Might be best to use Facebook i'll see if I can find my post as the response was quick and efficient unlike their responses in here. I.e nowt from them so far.
    They needed my name and serial numbers probably to log problems etc.
    Message was edited by: bensimmo

  • I'm trying to connect through the FTP client Filezilla. When I try to login with the wizard, it gives me a "503 Failure of Data Connection" reply; when I attempt to login myself, it gives me a "530 Login Authentication Failed." HELP!!!

    My current softward is: Mac OS X Lion 10.7.5 (11G63)
    When I attempt to use the Filezilla connection wizard I get the following message:
    Connecting to probe.filezilla-project.org
    Response: 220 FZ router and firewall tester ready
    USER FileZilla
    Response: 331 Give any password.
    PASS 3.7.1.1
    Response: 230 logged on.
    Checking for correct external IP address
    Retrieving external IP address from http://ip.filezilla-project.org/ip.php
    Checking for correct external IP address
    IP 27.0.19.56 ch-a-bj-fg
    Response: 200 OK
    PREP 52470
    Response: 200 Using port 52470, data token 1871898076
    PORT 27,0,19,56,204,246
    Response: 200 PORT command successful
    LIST
    Response: 150 opening data connection
    Response: 503 Failure of data connection.
    Server sent unexpected reply.
    Connection closed
    When I attempt to login Host/Username/Password myself I get the following message:
    Status:          Resolving address of amyhoney.com
    Status:          Connecting to 184.168.54.1:21...
    Status:          Connection established, waiting for welcome message...
    Response:          220---------- Welcome to Pure-FTPd [privsep] [TLS] ----------
    Response:          220-You are user number 12 of 500 allowed.
    Response:          220-Local time is now 04:05. Server port: 21.
    Response:          220-This is a private system - No anonymous login
    Response:          220 You will be disconnected after 3 minutes of inactivity.
    Command:          USER 5475****
    Response:          331 User 5475**** OK. Password required
    Command:          PASS ********************
    Response:          530 Login authentication failed
    Error:          Critical error
    Error:          Could not connect to server
    Now before anyone points out the obvious: my username and password are correct. I've already gone through changing them so I know they are.
    Additionally, I've pretty much tried EVERYTHING I've read online, from messing with "terminal" (and subsequently the FTP and STFP options) to changing the sharing options and turning on file sharing/remote management as well as just turning off my Firewall completely.
    Now I've used Filezilla before when I first published my site and everything worked fine. My site is published through Wordpress so most of my editing was done through simply logging into my "wp-login." I recently changed the theme and in order to change the header image in that theme I have to do it through my "wp-content" folder, which means I need to use Filezilla. I feel like a complete moron right now considering I've had my site for about a year and can't even doing something this simple.
    I've read that the newer version of Lion/Mountain Lion don't support automatice FTP anymore, which (as I mentioned prior) I attempted to fix through Terminal. However, nothing I do seem to do works.
    Can someone walk me through fixing this? And I do mean 'walk me through'. I'm not a tech-savvy nerd who knows all the lingo, I just know the basics so sorry if my ignorance offends you.
    HELP!!

    First be sure login and password are OK. Sometimes the address starts wit "http://..." and sometime starts with "ftp://...". Try both normal FTP access and Scure FTP access (SFTP). At the end, contact the site's provider.

  • OBIA 7.9.5 EBS Integration Not Logged On nQSError 43001 Authentication Fail

    Hi,
    I'm attempting to get Oracle Business Intelligence Applications 7.9.5 / OBIEE 10.1.3.3.2 integrated into the eBusiness Suite 11.5.10.2 per Metalink Note 552735.1. At the moment not an action link, just menu option to SA Administrator.
    I've run into and worked around a number of problems with the Initialization block variables setup in OracleBIAnalyticsApps.rpd and now no longer get errors in the NQServer.log after disabling Initialization Blocks for Siebel/Peoplesoft and disabling 2 EBS specific Init blocks that were erroring; 'Inventory Organizations' and 'Ledgers' I'll fix those later.
    However, now I get an error in the sawlog0.log file as follows:
    File: project/webodbcaccess/odbcconnectionimpl.cpp Line: 371
    Properties: ConnId-6,6;ThreadID-1145072560
    Location:
    saw.odbc.connection.open
    saw.connectionPool.getConnection
    saw.threadPool
    saw.threads
    Odbc driver returned an error (SQLDriverConnectW).
    State: 08004. Code: 10018. NQODBC [SQL_STATE: 08004|http://forums.oracle.com/forums/] [nQSError: 10018|http://forums.oracle.com/forums/] Access for the requested connection is refused.
    [nQSError: 43001|http://forums.oracle.com/forums/] Authentication failed for in repository Star: invalid user/password. (08004)
    Type: Error
    Severity: 42
    Time: Wed Dec 3 07:13:16 2008
    File: project/webconnect/connection.cpp Line: 276
    Properties: ThreadID-1145072560
    Location:
    saw.connectionPool.getConnection
    saw.threadPool
    saw.threads
    Authentication Failure.
    Odbc driver returned an error (SQLDriverConnectW).
    Can anyone point me in the right direction here?
    Thanks,
    Gareth

    The strange thing is both Gareth and I have configured OBIA/OBIEE on a Linux server and local authentication works fine. Once we enable external EBS authentication, we get the error listed above.
    Does anyone who has done the OBIA EBS integration with OBIEE running on Linux have an example of the odbc.ini file. It appears that even though we have reconfigured OracleBIAnalyticsApps.rpd to use OCI everywhere, that there is still some hard coded ODBC references for external authentication.
    We are configuring instanceconfig.xml as directed:
    Integrating Oracle Business Intelligence Applications with Oracle E-Business Suite
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=552735.1
    Configuring InstanceConfig.xml for External Authentication
    1. Modify the instanceconfig.xml file for the Oracle BI Presentation Services as shown below:
    <?xml version="1.0"?>
    <WebConfig>
    <ServerInstance>
    <CatalogPath>c:\temp\default</CatalogPath>
    <DSN>AnalyticsWeb</DSN>
    <Auth>
    <ExternalLogon enabled="true">
    <ParamList>
    <Param name="NQ_SESSION.ICX_SESSION_COOKIE"
    source="cookie"
    nameInSource="EBSAppsDatabaseSID"/>
    <Param name="NQ_SESSION.ACF"
    source="url"
    nameInSource="ACF"/>
    </ParamList>
    </ExternalLogon>
    </Auth>
    <!-- Other settings here. -->
    </ServerInstance>
    </WebConfig>
    2. The nameInSource for the cookie should be the same as the Oracle E-Business Suite application database SID name. To verify the name of the cookie, using Firefox, check the name of the cookie created under the us.oracle.com domain (or the domain where your Oracle E-Business Suite Application server is running). Please note that the cookie name is case sensitive.

  • BO XI 3.1 : Active Directory Authentication failed to get the Active Directory groups

    Dear all 
            In our environment, there are 2 domain (domain A and B); it works well all the time. Today, all the user belong to domain A are not logi n; for user in domain B, all of them can log in but BO server response is very slowly. and there is error message popup when opening Webi report for domain B user. Below are the error message: 
           " Active Directory Authentication failed to get the Active Directory groups for the account with ID:XXXX; pls make sure this account is valid and belongs to an accessible domain"
          Anyone has encountered similar issue?
       BO version: BO XI 3.1 SP5
       Authenticate: Windows AD
    Thanks and Regards

    Please get in touch with your AD team and verify if there are any changes applied to the domain controller and there are no network issues.
    Also since this is a multi domain, make sure you have 2 way transitive forest trust as mentioned in SAP Note : 1323391 and FQDN for Directory servers are maintained in registry as per 1199995
    http://service.sap.com/sap/support/notes/1323391
    http://service.sap.com/sap/support/notes/1199995
    -Ambarish-

  • User Authentication Failed error when trying to display a JSP portlet

    The steps carried out are as follows :
    1. Created a JSP file named "c.jsp" and deployed it under 902_MidTier_Home\j2ee\home\default-web-app\examples\jsp
    2. Created a table named USER_TABLE under Scott schema to store the usernames and passwords to validate this JSP application.
    3. Registered this JSP as an external application with the following values :
    Application Name           : RAGHU
    Login URL          : http://hostname:port/j2ee/examples/jsp/c.jsp
    User Name/ID Field Name     : username
    Password Field Name     : password
    Type of Authentication Used : POST
    3. Clicked on the External Application and entered the username as USER1 and password as USER1 ( These values are available
    under USER_TABLE for comparison ). Then it shows the message "Hi User1 .. Welcome message"
    4. Now created a directory named JSPSAMPLE under "WEB-INF\Providers" and put the provider.xml file under this.
    Created a raghu.properties file and placed it under "WEB-INF\deployment".
    5. Now tested the testpage using the URL " http://hostname:port/jpdk/providers/raghu " and it works fine.
    6. Registered this as a provider in Portal and added this portlet onto a page. Assigned this page to a newly created user.
    It gives the message " Authentication Failed - Update Login Information " which is expected. I click on the link and
    it takes me to the external application username password. I enter the credentials but this time it comes back again
    to the page with the same message " Authentication Failed - Update Login Information ".
    7. Basically the values are not passed to the Username and Password in jsp page which is why the problem occurs.
    The JSP Code used is as follows :
    <%@ page import="java.sql.*" %>
    <HTML>
    <HEAD><TITLE>DB Connectivity test</TITLE></HEAD>
    <BODY BGCOLOR="#FFFFFF">
    <CENTER>
    <B>user_table</B>
    <BR><BR>
    <%
    String username = request.getParameter("username");
    String password = request.getParameter("password");
    Connection conn = null;
    try
    Class.forName("oracle.jdbc.driver.OracleDriver");
    conn = DriverManager.getConnection("jdbc:oracle:thin:@hostname:1521:iasdb","scott","tiger");
    Statement stmt = conn.createStatement();
    String query = "SELECT * FROM user_table where userid= '"+ username +"' and passwd = '" + password + "' " ;
    ResultSet rs = stmt.executeQuery(query);
    while(rs.next())
    out.println("<TR>");
    out.println(" <TD> hi " + rs.getString("userid") + ", welcome</TD>");
    out.println("</TR>");
    out.println("</TABLE>");
    catch(SQLException e)
    out.println("SQLException: " + e.getMessage() + "<BR>");
    while((e = e.getNextException()) != null)
    out.println(e.getMessage() + "<BR>");
    out.println("invalid userid,password");
    catch(ClassNotFoundException e)
    out.println("ClassNotFoundException: " + e.getMessage() + "<BR>");
    finally
    //Clean up resources, close the connection.
    if(conn != null)
    try
    conn.close();
    catch (Exception ignored) {}
    %>
    </CENTER>
    </BODY>
    </HTML>
    The Provider.xml file used is as follows :
    <?xml version="1.0" encoding="UTF-8"?>
    <?providerDefinition version="3.1"?>
    <provider class="oracle.portal.provider.v2.http.URLProviderDefinition">
         <providerInstanceClass>oracle.portal.provider.v2.http.URLProviderInstance</providerInstanceClass>
         <session>true</session>
         <authentication class="oracle.portal.provider.v2.security.Authentication">
              <authType>ExternalApp</authType>
              <userFieldName>username</userFieldName>
              <userPwdName>password</userPwdName>
              <errorPageMessages>Raghu,Please sign in,Sign me up!</errorPageMessages>
         </authentication>
         <portlet class="oracle.portal.provider.v2.http.URLPortletDefinition">
              <id>1</id>
              <name>RaghuPortlet</name>
              <title>Raghu Mail Portlet</title>
              <description>This portlet is to test Integration services using mail.yahoo.com</description>
              <timeout>100</timeout>
              <timeoutMessage>Raghu timed out</timeoutMessage>
              <showEdit>false</showEdit>
              <showEditDefault>false</showEditDefault>
              <showPreview>false</showPreview>
              <showDetails>false</showDetails>
              <hasHelp>false</hasHelp>
              <hasAbout>false</hasAbout>
              <acceptContentType>text/html</acceptContentType>
              <registrationPortlet>false</registrationPortlet>
              <accessControl>public</accessControl>
              <renderer class="oracle.portal.provider.v2.render.RenderManager">
                   <showPage class="oracle.portal.provider.v2.render.http.URLRenderer">
                        <pageUrl>http://172.17.24.235:8888/c.jsp</pageUrl>
                        <contentType>text/html</contentType>
                        <filter class="oracle.portal.provider.v2.render.HtmlFilter">
                             <useAuthLinks>true</useAuthLinks>
                             <headerTrimTag>&lt;table width="100%" cellpadding=0 cellspacing=0 border=0>&lt;tr>&lt;td bgcolor=#9bbad6></headerTrimTag>
                             <footerTrimTag>&lt;table width="100%" cellpadding=2 cellspacing=1>&lt;tr>&lt;td bgcolor=#9bbad6></footerTrimTag>
                             <convertTarget>true</convertTarget>
                             <redirectUrlFieldName>.done</redirectUrlFieldName>
                        </filter>
                   </showPage>
              </renderer>
              <securityManager class="oracle.portal.provider.v2.security.URLSecurityManager">
                   <authorizType>registered</authorizType>
              </securityManager>
         </portlet>
    </provider>
    The Contents of raghu.properties file
    serviceClass=oracle.webdb.provider.v2.adapter.soapV1.ProviderAdapter
    loaderClass=oracle.portal.provider.v2.http.DefaultProviderLoader
    showTestPage=true
    definition=providers/raghu/provider.xml
    autoReload=true
    Any inputs regarding why the values are passed properly in case of External Application but not so when registered as
    a portlet in Portal.
    Regards
    Satish G

    As I can see from the information posted, you are trying to
    use URL-based portlet's SSO feature, though not in a correct
    way.
    The SSO feature of URL-based portlets relie on the usage
    of Cookies as authentication tokens. For example, in the
    present context, http://hostname:port/j2ee/examples/jsp/c.jsp
    will write a cookie to the client upon successfull authentication.
    Subsequent access to the same JSP or some other JSP in the same
    workspace should be checking for the existence of this particular
    cookie at the client side and if found should not prompt for
    user information again.
    If you can fine tune your existing applications as per above
    conditions, then everything should work fine. Else you might
    want to use page parameters to pass user information.
    For more information on page parameters, please visit
    http://portalstudio.oracle.com/servlet/page?_pageid=350&_dad=ops&_schema=OPSTUDIO&12678_PDKHOME902_39847486.p_subid=249821&12678_PDKHOME902_39847486.p_sub_siteid=73&12678_PDKHOME902_39847486.p_edit=0#NEW1

Maybe you are looking for

  • Sir, it appears my iTunes is possessed.

    Short of performing an exorcism Im lost! Every few days iTunes takes is upon itself to start up randomly and begin playing any old song... when I try and turn it off it keeps coming back to life... nothing will get rid of it until I restart... but th

  • Repost:Edit Folder link/Portlet Customize link

    All, apologies if this has been asked already. Need to hide the customize link in Portlet and edit folder link in folder/content area. Better yet, would like to give selective access to these, based on user group (or other acl). I am on 3.0.7. Curren

  • Can't delete or move new emails!

    For the past 2 days when I recieve email I cannot delete it or move it into another folder. Also when I highlight a message to read it the icon beside it showing that it's a new email doesn't disappear. I use my Mac for the basics, email and internet

  • Class not registered - CrystalPrintControl - havent seen an answer

    Hello, I'm still working on my issue from this thread Printing Issue - Visual Studio 2008 with Crystal Reports Basic I want to thank Ludek for starting me on the right track. I've since updated the project to a .NET 4.0 project using Visual Studio 20

  • Converting a movie for iPod is EXTREMELY slow

    Hi, I am trying to convert a movie that I have in iTunes to use on an iPod touch. I used Advanced --> Create iPod or Iphone Version. However, it is EXTREMELY slow. The movie is 95 minutes and under 2GB in size. After 2+ hours of converting it's still