CVS / subversion with dreamweaver CS3

Hello,
I am working on a few projects that require code versioning
and I have been told by many people that CVS is the way to go.
Is there a way to integrate CVS with dreamweaver CS3?
Has dreamweaver CS3 native support for any repository system
type??
There are some free gpl plugin/add-on for CVS/ repository
support?
Thanks a lot

"FMorales_at4" <[email protected]> wrote in
message
news:fgvcau$g2e$[email protected]..
> Hello,
>
> I am working on a few projects that require code
versioning and I have
> been
> told by many people that CVS is the way to go.
Some may say SubVersioN is the way to go, it's been
redesigned to address
some shortcomings in CVS
> Is there a way to integrate CVS with dreamweaver CS3?
http://www.grafxsoftware.com/product.php?id=22
> Has dreamweaver CS3 native support for any repository
system type??
Dreamweaver has native support for Microsoft Visual
SourceSaFe
Dreamweaver can use WebDAV repositories natively, and you can
use apache as
a WebDAV frontent for SubVersion.
> There are some free gpl plugin/add-on for CVS/
repository support?
http://sourceforge.net/projects/subweaver/
> Thanks a lot
Welcome

Similar Messages

  • Contribute CS4 with Dreamweaver CS3

    I have a number of sites created with Dreamweaver CS3, and
    intend to provide update access with Contribute - but Contribute
    CS3 is now hard to get hold of. Will these sites work with
    Contribute CS4 if developed with DW CS3: general functions such as
    editable sections, checkin/checkout. I don't want to upgrade my
    systems yet to CS4.
    CS4 suite has much higher system requirement than CS3 - which
    probably means a hardware upgrade first - so want to avoid this.
    Can't find any info on this anywhere.
    Thanks

    I just read on the adobe website that:
    "Contribute CS4 works with Adobe Dreamweaver® CS4
    templates"
    Does that mean it wont work with Dreamweaver CS3 templates?

  • Can someone with Dreamweaver cs3 open a cs5 file?

    Hi:
    Work just upgraded me to DreamWeaver CS5 but I work on files that I share with another web author and they have DreamWeaver CS3.  If I edit a file and save it in DreamWeaver 5, will the other author be able to open the file in DreamWeaver CS3?  I have not loaded my new software at work yet because I was afraid there might be a problem.    This is our work intranet so I need to be careful I don't screw the site up. We save our files with the extension .shtml.
    Thanks
    Jeff

    Yes, provided you use DW's Check In/Check Out feature so that you don't overwrite each other's work.
    There are no proprietary file formats like Microsoft Office.
    HTML code is HTML code and can be read by any human being or text editor.
    The only caveats are if you use emerging technologies such as HTML5. CS5 can handle that but CS3 will struggle.

  • Bypassing Firewall/Proxy Settings with Dreamweaver CS3

    Hello,
    The company that I work for has given us Dreamweaver CS3 and
    it's great, however we have a problem with the companies firewall
    blocking Dreamweaver from seeing external images when in "Design"
    view. I have search throughout Google for a solution and have yet
    to find one. I come here in the hopes that someone can help. Our IT
    department has told me that the firewall solution they use does not
    allow rule sets per application, so they cannot just say "allow
    this program to use the web". This leaves me in a tough spot, but
    they said in Dreamweaver CS3 has a way to setup a proxy and allow
    it to bypass our firewall that would make this quick and easy. Does
    DW have something like this, and if so then please point me in the
    right direction!
    I appreciate all assistance.
    Regards,
    John

    Maybe not per application but certainly by PC or IP adress.
    Can they put
    your IP adress in a rule less agressif.
    aka Frenchy
    "jljr222" <[email protected]> wrote in
    message
    news:gf1kqf$fjj$[email protected]..
    > Hello,
    >
    > The company that I work has given us Dreamweaver CS3 and
    it's great,
    > however
    > we have a problem with the companies firewall blocking
    dreamweaver from
    > seeing
    > external images when in "Design" view. I have search
    throughout Google
    > for a
    > solution and have yet to find one. I come in here in the
    hopes that
    > someone
    > can help. Our IT department has told me that the
    firewall solution they
    > use
    > does not allow rule sets per application, so they cannot
    just say "allow
    > this
    > program to use the web". This leaves me in a tough spot,
    but they said in
    > Dreamweaver CS3 has a way to setup a proxy and allow it
    to bypass our
    > firewall
    > that would make this quick and easy. Does DW have
    something like this,
    > and if
    > so then please point me in the right direction!
    >
    > I appreciate all assistance.
    >
    > Regards,
    > John
    >

  • Dang Frustrated with Dreamweaver CS3!

    For the past 23 years I have taught myself all the computer
    programs I use from Freehand, Photoshop, lllustrator, Indesign,
    plus many others yet I rarely had to look up something in a book
    and get the answer.
    Not so with Dreamweaver!
    I can't seem to get anywhere with this program. I have
    learned much over the last 2 years I have been using it but I am
    NOWHERE NEAR where I want to be. This has been the hardest program
    there is for me to learn because of all this stupid code. Go ahead
    call me a designer and not a programmer because it is true. I hate
    code and after 2 years of this program I hate it even more. I just
    want it to do what i want it to do and use visual commands only to
    get there!
    Can't they simplify the program for us stupid designer types?
    I have several books on the program and even subscribe to
    Lynda.com for their advice but even after going over the same
    module 3 times I still don't have it right.
    I just want to take a file from Photoshop CS3, slice it up
    and bring it into Dreamweaver and HAVE IT WORK RIGHT! Something
    always goes wrong and hours and hours of wasted time is spent in a
    fruitless search for what happened in trying to fix it. I have
    posts in other forums about this issue but no one has given me any
    answers.
    Can someone please tell me where to find this answer? The
    issues is I just can't deal with those stupid white spaces that
    show up when the text goes beyond the slice area from Photoshop.
    Here is an example:
    http://www.westshorecashloans.com/
    Surely there is an answer out there! I have wasted over 3
    weeks of work on this one issue and it still isn't solved.
    Please, please, PLEASE someone help me find it!
    Thanks
    Kelly

    .oO(MountainMan)
    >For the past 23 years I have taught myself all the
    computer programs I use from
    >Freehand, Photoshop, lllustrator, Indesign, plus many
    others yet I rarely had
    >to look up something in a book and get the answer.
    >
    > Not so with Dreamweaver!
    >
    > I can't seem to get anywhere with this program. I have
    learned much over the
    >last 2 years I have been using it but I am NOWHERE NEAR
    where I want to be.
    >This has been the hardest program there is for me to
    learn because of all this
    >stupid code. Go ahead call me a designer and not a
    programmer because it is
    >true. I hate code and after 2 years of this program I
    hate it even more. I just
    >want it to do what i want it to do and use visual
    commands only to get there!
    DW is neither a DTP nor a WYSIWYG program, even if many
    people still
    believe that. Without a solid understanding of what HTML and
    CSS are
    and how they work, you won't be able to do anything useful
    with DW.
    > Can't they simplify the program for us stupid designer
    types?
    Why should they? In fact there are other, much more simple
    tools for the
    "stupid designer types", where you can more or less click
    together your
    website. But the results are almost always beyond good and
    evil. You get
    what you pay for.
    With every tool you first have to learn how to use it. If I
    would go to
    the next construction site and ask the guy if I could try the
    pneumatic
    hammer, what do you think would he say? He would either laugh
    at me or
    directly call the guys with these nice white jackets.
    Same thing with DW. If you don't know how to properly use it,
    you can't
    do anything good with it, you'll just waste your time or even
    shoot your
    own foot. Why are there so many broken or even insecure
    websites, which
    are easy to hack and can be abused for a lot of bad things?
    Because many
    people don't really know what they are doing and try to make
    the second
    step before the first one.
    > I have several books on the program and even subscribe
    to Lynda.com for their
    >advice but even after going over the same module 3 times
    I still don't have it
    >right.
    >
    > I just want to take a file from Photoshop CS3, slice it
    up and bring it into
    >Dreamweaver and HAVE IT WORK RIGHT!
    Forget it. This will _never_ work right, simply because this
    is not how
    the web works. Your approach might work for PDFs or other
    fixed size
    image-based things, but never for a website. The web is
    flexible.
    > Can someone please tell me where to find this answer?
    The answer is either to learn HTML and CSS first before even
    thinking
    about starting DW or to focus on your own skills and
    capabilities as a
    designer and ask someone else to turn them into a website.
    Micha

  • CF 7 with Dreamweaver CS3

    My setup is:-
    DW CS3
    CF MX 7
    Windows 7 workstation
    Windows 2003 development server
    Local area network
    I am having a problem with DW CS3.
    A site I have used for some weeks has suddenly started misbehaving.
    When trying to access a CF 7 data source binding I get :-
    "In order to view the columns of this recordset, please associate the variable (#application.dsn#) with a data source.  To do this, press the plus button and choose Data Source Name Variable."
    When I try and associate my application.dsn with a data source none are seen in the drop down.
    I compared the site to another site which is working fine and I can't see any difference in the setup.
    I have cleared the site cache and removed the data connections from within DW. (menu, Site => Advanced)
    I tried completely recreating the site copying only the cfm files into a new directory.
    I tried removing the configs from the Appdata cache/config.
    I tried reinstalling Dreamweaver.
    I've used this set up for years, but that doesn't mean to say I haven't missed something obvious - very rusty.
    Any ideas as to what is wrong, please?
    Thanks,
    Jenny

    Awesome community.  Well done, Adobe!  About as useless as your support department.

  • Getting Started with Dreamweaver CS3

    I just purchased Dreamweaver CS3 online but have not yet
    received it. I need to get a website up quickly but have never used
    Dreamweaver. Can anyone point me to tutorials or other information
    that I can review in advance? I tried to download a free trial of
    dreamweaver 8 (CS3 not yet a available), assuming the
    interface/functionality is similar, but can't find anything.
    Any help that can get me quickly started is much
    appreciated.

    I really want to emphasize this excellent suggestion from
    Geoff. I know you
    are anxious to get started, but make sure you do that with an
    extreme bias
    towards learning the underlying HTML and CSS. The more you
    know about this,
    the shallower your learning curve with DW will be.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "[email protected]" <[email protected]>
    wrote in message
    news:f0r4n1$38e$[email protected]..
    > I'm assuming you have HTML coding skills, however? If
    you don't understand
    > the
    > underlying coding behind building a site, how to do
    basic site
    > architecture,
    > optimizing graphics and the like, you may have just
    wasted some money. If
    > you
    > do know how to code, etc., then using DW will be pretty
    intuitive for you.
    > Just
    > follow the introductory tutorials to get oriented then
    start playing with
    > it so
    > its features become easy to use, almost second nature.
    There are excellent
    > books at Amazon for this, especially visual quick start
    guides.
    >
    > Again, if you don't have the skills, I really recommend
    finding a
    > pre-built
    > template through a site hosting provider that suits your
    needs and your
    > taste,
    > then modifying only what's necessary such as the link
    names, the content,
    > and
    > images.
    >
    > Not knowing what position you're coming from, but
    assuming one without
    > experience, I think you'll find you're in for a good
    deal of work. Web
    > sites --
    > good ones -- aren't built overnight. It just isn't
    plug-n-play (yet).
    >
    > Sorry. Not trying to put you down but just offering a
    realistic answer.
    >

  • Fireworks CS4 compatible with Dreamweaver CS3

    Is there any issues with developing pop ups in Fireworks CS4
    and importing into Dreamweaver CS3? Thanks

    > I have no programming (HTML) experience
    DW will be a very tough learning curve for you in this case.
    Are you sure
    it's the right choice?
    > I was reading where DW CS3 doesn't do popups.
    Where? Surely you are misinterpreting that - it has Spry
    menus built in,
    but a much better choice even than those exists.
    Check the uberlink and MacFly tutorials at PVII -
    http://www.projectseven.com/
    and the Navbar tutorial/articles at Thierry's place
    http://tjkdesign.com/articles/dropdown/
    Or this one (more recent article):
    http://tjkdesign.com/articles/Pure_CSS_Dropdown_Menus.asp
    Or to get it done fast, go here -
    http://www.projectseven.com/tutorials/navigation/auto_hide/index.htm
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "BRF64" <[email protected]> wrote in message
    news:ge7gfg$p2s$[email protected]..
    > Murry,
    >
    > Thanks for responding. I was reading where DW CS3
    doesn't do popups. The
    > result I would like would be to have a popup occur from
    a line of text (no
    > graphic). I have no programming (HTML) experience and I
    am not sure how to
    > achieve that result. Any recommendations would be
    appreciated.
    >

  • Is this possible With dreamweaver cs3

    I am a photographer and for my future website I would really
    like a feature where the viewer can click on the photo and it flips
    over, and on the back I will have type/fonts explaining the photo.
    I want to be able to add/edit the type when needed. I have never
    designed a website but i am going to take classes to learn. Can
    Dreamweaver CS3 do this or any other program? Any help would be
    greatly appreciated.

    A simpler solution (no flipping) would be to use a photo
    album generating
    ware like JAlbum. It's free and you can add as many
    comments/details as you
    wish which will get picked up by the search engines. Many
    skins read
    digital info such as shutter speed, camera settings from your
    camera. A
    newer feature is GPS which provides maps to the location
    shoot. JAlbum was
    designed for photographers. It is very flexible with
    customizable CSS and
    skins. Best of all, it generates the thumbnail images and
    html pages for
    you so you don't have to. If you have many photos, this
    software will save
    you several hours of time. A+++
    http://jalbum.net/
    --Nancy O.
    Alt-Web Design & Publishing
    www.alt-web.com
    "DMAGANA1" <[email protected]> wrote in
    message
    news:fq1ska$nn8$[email protected]..
    > I am a photographer and for my future website I would
    really like a
    feature
    > where the viewer can click on the photo and it flips
    over, and on the back
    I
    > will have type/fonts explaining the photo. I want to be
    able to add/edit
    the
    > type when needed. I have never designed a website but i
    am going to take
    > classes to learn. Can Dreamweaver CS3 do this or any
    other program? Any
    help
    > would be greatly appreciated.
    >

  • Contribute CS3 incompatible with Dreamweaver CS3

    All my Conribute connections no longer work with DW CS3 &
    CT CS3. Why?
    1. I have correctly set up a remote connection in Contribute.
    The contribute connection to the website IP is established.
    2. The FTP connection from DW to the website IP is also
    correctly established and working.
    3. The connection information is identical for both
    applications and verified.
    4. PROBLEM: When trying to set up the Contribute connection
    from within DW, the following error msg appears: "Dreamweaver could
    not connect to the remote server. You cannot perform Contribute
    administration tasks without a connection to the remote server.
    Please fix the remote connection before proceeding."
    5. NOTE: When the "Administer Site in Contribute" (or Test)
    button is clicked in DW, it appears that several files are being
    loaded to the remote server before the error message appears.
    Subsequent attempts at clicking the buttons seems to load more
    files. Very weird.
    6. FACTS: There is no problem with the remote connection from
    either DW or CT.
    QUESTION: What's up with this message? Why is there a failure
    to communicate between these two application that wasn't there
    before?
    Thanks in advance for any assistance,
    Chris Kane

    Have you found an answer for this. I am in a similar
    situation, in CS3 Mac. If I use www.mysite.com/www, which is the
    folder for ftp purposes, I get:
    Dreamweaver could not find a page at the specified site root
    URL. Please check the site root URL.
    If I just go to the main url, www.mysite.com, I get:
    Dreamweaver could not connect to the remote server. You
    cannot perform Contribute administration tasks without a connection
    to a remote server. Please fix the remote connection before
    continuing.
    I've tried it on another site I administer and it worked
    fine, so I'm wondering if it's something to do with the
    configuration of the server, but my hosts haven't got any answers
    either...
    Any pointers gratefully received.

  • Using 1.5 with Dreamweaver CS3

    Hello,
    What are the pros and cons of replacing Spry 1.4, bundled
    with DW CS3, with the 1.5 prerelease?
    In our company, we've never used Spry before but plan to do
    that with a new project we're working on. Is it better to use (and
    learn) v1.5 instead the spry code that comes with DW?
    Any side effects on Dreamweaver functionality?
    Regards

    Hello sakisp,
    The Pros are:
    - lots of bugs were fixed
    - lots of new features added (Data + Widgets + Effects)
    - code improved for performance
    - we did some structural changes and deprecated some of the
    API, however we remained DW compatible. If you start using Spry 1.5
    you won't have to migrate any of your page to the new version.
    - improved the samples, documentation and demos.
    The Cons are:
    - the upgrade procedure may generate some problems and we
    don't have an automate way to make this update:
    http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?catid=602&threadid=1269066&fo rumid=72
    - none of the new features in Spry 1.5 have a DW CS3
    integration so you'll have to code some of the things by hand.
    We worked as hard as possible and the Spry 1.5 is fully
    compatible with the Dreamweaver Spry version. This was one of our
    goals for this release to make sure the thinks will still work
    after the release.
    Basically I consider the upgrade a good thing, specially if
    you start now from scratch with the Spry. Just make sure you read
    carefully the previous post with the upgrade procedure in DW.
    Regards,
    Cristian MARIN

  • Trouble with Dreamweaver CS3 Install

    Greetings all. I installed Dreamweaver CS3. After this, I had
    a system problem (unrelated) to which I had to do a system restore
    which went back to before Dreamweaver CS3 was installed.
    I now want to install The Web Premium CS3, but the install
    says I can't install Dreamweaver because of a conflict. There is no
    uninstall (in control panel) for Dreamweaver CS3 and there are not
    even any EXE files in it's folders (product of System Restore I am
    guessing?)
    How can I get this uninstalled so I can install the entire
    package?
    Thanks for the help!!

    What's the exact error message you're seeing? See if these
    help:
    Error "Installing Adobe Photoshop CS3 results in a conflict
    with Adobe
    Photoshop CS3" when you install Creative Suite 3 or Photoshop
    CS3
    http://www.adobe.com/go/kb401551
    Remove Creative Suite 3 and CS3 point products from Windows
    XP, Windows
    Vista and Mac OS
    http://www.adobe.com/go/kb401090
    kb401090 points to a Clean Script that will remove files and
    registry
    entries if Add/Remove Programs isn't working.
    David Alcala
    Adobe Product Support

  • Help with Dreamweaver CS3 Free Trial

    I am getting the following error from the website if I try to
    go to the Adobe Dreamweaver CS3 free trial. Does anyone know how to
    help me with this? Element TD_HEADER_LABEL_DREAMWEAVER is undefined
    in a CFML structure referenced as part of an expression.

    k_hudson04 wrote:
    > I am getting the following error from the website if I
    try to go to the Adobe
    > Dreamweaver CS3 free trial. Does anyone know how to help
    me with this? Element
    > TD_HEADER_LABEL_DREAMWEAVER is undefined in a CFML
    structure referenced as part
    > of an expression.
    It's an error on the Adobe server. It's been like that for a
    couple of
    days. I'm surprised it hasn't been fixed. I'll see if I can
    contact
    someone who can sort it out.
    You should be aware, though, that the release of Dreamweaver
    CS4 is
    imminent, so the trial of CS3 might be withdrawn at any time.
    David Powers, Adobe Community Expert
    Author, "The Essential Guide to Dreamweaver CS3" (friends of
    ED)
    Author, "PHP Solutions" (friends of ED)
    http://foundationphp.com/

  • Editing a Web Photo Album Created With Dreamweaver CS3 and Fireworks CS3

    I created a web photo album with DW CS3 and FW CS3. I want to
    add and delete some of the photos in the collection. So far, the
    only way I have been able to do this is to recreate the whole thing
    from scratch with all the correct pictures in the target folder. Is
    there an easier way?

    I could be wrong (we only test Adobe widgets for the quality
    of their output
    code, not for features, or lack of features) but recreation,
    as Patty said,
    might be the only way. If you have a development budget, you
    might want to
    take a look at some commercial tools that would have the
    features and
    capabilities you want or need.
    Al Sparber - PVII
    http://www.projectseven.com
    Fully Automated Menu Systems | Galleries | Widgets
    Lightshow Magic: the new wave...
    "AmateurWebMaster" <[email protected]> wrote
    in message
    news:g6kf6v$o1l$[email protected]..
    >I created a web photo album with DW CS3 and FW CS3. I
    want to add and
    >delete
    > some of the photos in the collection. So far, the only
    way I have been
    > able to
    > do this is to recreate the whole thing from scratch with
    all the correct
    > pictures in the target folder. Is there an easier way?
    >

  • Problem with Dreamweaver CS3 trial

    I have just downloaded, the 30 day trial it ask where i would
    like to install it to.... i press continue then it goes to 100%
    then a error message
    A problem occured whilst extracting some files. Check
    available space on your computer and the write privileges on the
    destination folder..
    i have 75gb left and i'm doing it to my desktop so no
    privileges needed
    im on xp home edition

    >I run the ADBEDRWVCSE_WWE.EXE 292.289 KB
    Where did you get this file?
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "ABK54" <[email protected]> wrote in message
    news:fojl9t$e10$[email protected]..
    >I run the ADBEDRWVCSE_WWE.EXE 292.289 KB (for trial
    version of Dreamweaver
    >CS3)
    > and after I have try to run the Setup.exe file.
    > After 2 sec open a window - preparetion of Adobe
    Dreamweaver CS3 -
    > ,transer
    > some files and open a window Loading setup... in 2 sec
    close this window
    > and
    > after nothing!!!
    >
    > I need your help please
    > tks
    >
    >
    > sorry for the shuting
    >

Maybe you are looking for