CWA NOT REDIRECT AUTOMATIC IN CLIENT WEBBROWSER

Guys, i have problem, the the portal cwa not open automatic in clients, if the client copy and paste the url of session, this open!! but automatic is the problem, the acl is ok, dns is ok.
switch version 15.2

Client Machine URL Redirection Function Not Working
Symptoms or Issue
Users are not appropriately redirected to the correct URL for authentication.
Conditions
The monitoring and troubleshooting configuration validator is designed to catch this. The web authentication configuration (global) details may display something like the following:
•Mandatory Expected Configuration Found On Device
•aaa authorization auth-proxy default group <radius_group> aaa authorization auth-proxy default group radius
•aaa accounting auth-proxy default start-stop group <radius_group> Missing
•ip admission name <word> proxy http inactivity-time 60 Missing fallback profile <word>
•ip access-group <word> in
•ip admission <word> Missing
•ip http server ip http server
•ip http secure-server ip http secure-server
Possible Causes
The switch is missing the ip http server and/or ip http secure-server command.
Resolution
Verify and (if necessary) adjust the configuration on the switch.
and also verify the similar issue with solution:https://supportforums.cisco.com/discussion/11954461/cwa-page-does-not-redirect

Similar Messages

CWA page does not redirect

Hi there,
I am having strange issue.
I have configured a wlan with Mac Filtering that is pointing to ISE. Followed this guide https://supportforums.cisco.com/docs/DOC-26442
Now, when user tries to connect to the wlan, it gets stuck in DHCP_REQD state. On troubleshooting I found that the ISE authenticates with Wireless MAB policy and points to the authorization profile where CWA redirect is configured. The WLC receives the redirect acl with redirect url but does not apply it on the client.
On ISE:
On WLC:
the ACL "tempcwa" allows traffic to and from ISE, DNS, DHCP, but I am not able to get IP. Even when I try manual IP address, I am not able to ping ISE. I am sure ACL is all ok! My DHCP works perfect for other WLANs with WLC webauth settings in the same subnet as CWA.
I am using AIR-CT5760, 03.02.02.SE, ct5760-ipservicesk9 and ISE 1.2 VM
Please help me!!

Thanks for your response..
If I remove the ACL then how the traffic destined to ISE will be allowed? The interesting part is, I am getting hits on the redirect ACL but client can not receive IP address.
DHCP is working fine and if I assign manual IP then DHCP is not the matter.
If Redirect ACL and ISE page is forwarded to WLC from ISE then why this is not working for clients??
Moreover, I noticed that even DACL is not being pushed to wireless clients from other authorization profiles. The traffic gets Permit_access but DACL does not restrict..
I think these two issues are interlinked..
Please suggest..

Why??? Simple snapshot can not refresh automatically, but can refresh manually.

Server 1 : Oracle 7.3.4 (as a Master site)
Server 2 : Oracle 7.3.4 (as a Snopshot site)
Client PC: SQL*Plus (Oracle 7.3.4 Client)
Step 1: on Client PC, start 2 SQL*Plus dialog Windows,
one(Window A) for <Server 1> , another(Window B) for <Server 2>;
Step 2: on <Window A> do:
SQL>connect scott/tiger@Server1
SQL>CREATE SNAPSHOT LOG ON scott.dept ;
SQL>select * from dept;
DEPTNO DNAME LOC
10 AAAAAA AAAAA
20 BBBBBB AAAAA
30 CCCCCC AAAAA
Step 3: on <Window B> do:
SQL>connect scott/tiger@Server2
SQL>CREATE DATABASE LINK oracle USING 'Server1';
SQL>CREATE SNAPSHOT all_dept REFRESH fast
start with sysdate NEXT SYSDATE+1/(24*60)
AS SELECT * FROM scott.dept@oracle;
-- refresh interval: 1 minute
SQL>select * from all_dept;
DEPTNO DNAME LOC
10 AAAAAA AAAAA
20 BBBBBB AAAAA
30 CCCCCC AAAAA
Step 4: on <Window A> do:
SQL>insert into dept values (50,'MMMMMM','NNNNN');
SQL>commit;
SQL>select * from dept;
DEPTNO DNAME LOC
10 AAAAAA AAAAA
20 BBBBBB AAAAA
30 CCCCCC AAAAA
50 MMMMMM NNNNN
<one or two minutes later ... ... >
Step 5: on <Window B> do:
SQL>select * from all_dept;
DEPTNO DNAME LOC
10 AAAAAA AAAAA
20 BBBBBB AAAAA
30 CCCCCC AAAAA
conclusion: Simple snapshot can not refresh automatically ???????
SQL>exec DBMS_SNAPSHOT.REFRESH( list => 'all_dept',method => 'F');
SQL>select * from all_dept;
DEPTNO DNAME LOC
10 AAAAAA AAAAA
20 BBBBBB AAAAA
30 CCCCCC AAAAA
50 MMMMMM NNNNN
conclusion:Simple snapshot can refresh manually.
How to solve this problem?????
Thank you very much
Zhang Ming-an

When you are manually refreshing the snapshot as scott/tiger, and your database link was defined with a 'connect to/identified by ' clause, your login credentials will be scott/tiger. When the refresh happens from the job queue, it does not use those credentials, It uses some default set. What you should probably do is:
1. create public database link Oracle using 'server1';
2. as scott/tiger, create database link Oracle connect to scott identified by tiger;
3. your automatic refresh should work now.

Index.html pages in local sub-directories will not load automatically when sub-directory name entered into address field, followed by a forward-slash

I am in the process of designing a website-on-a-CD. In order to make things easier for my clients, I decided to organize this site into local sub-directories with an index.html page in each one. However, when I try to enter the local sub-directory name, followed by a forward-slash, the index page does not open automatically. Instead, I get a raw directory listing that includes the index.html file, and anything else that is present within it. I would like to know if there is any way to force this page to load automatically within Firefox from a local storage medium as it would load from a web-server.

You need to use file:// as the protocol instead of C:/. The latter may never work (C:\ might).
Where is the main HTML located ?
Easiest if to store the images in a sub folder of the location because you can't go back via ../ beyond that root location for security reasons.
See:
*http://kb.mozillazine.org/Links_to_local_pages_do_not_work

MSExchangeSA and IS is not starting automatic at reboot after upgrading the server from SP1 to SP2

I am running a 2 node DAG with separate Hub & CAS servers
I have already upgraded the Hub CAS server and they are fine
Exchange running on Windows 2008 R2 SP1
All are in VM-Ware ESXi 5.0
After I upgrade the mailbox server to SP2 the SA and IS service not starting automatic after reboot
If I run "net time /set" command and then restart ADtopology server, the IS and SA starts fine
But again after reboot they do not start
Also I get the below event in the app log when the IS & SA fails to start
Log Name: Application
Source: MSExchangeIS
Date: 05/22/2012 5:15:03 AM
Event ID: 5003
Task Category: General
Level: Error
Keywords: Classic
User: N/A
Computer: server.domain.com
Description:
Unable to initialize the Information Store service because the clocks on the client and server are skewed. This may be caused by a time change either on the client or on the server, and may require a restart of that computer. Verify that your domain is correctly
configured and is currently online.
If I check the Registry for time resource it is taking from the DC
I manually compared the time between DC and Exchange and it is fine
Since the Exchange mailbox is virtual, I checked the time sync on VM-Ware tools and it is "unchecked"
Checked for group policy and do not find any specific to time sync.
Confirmed that Windows Time service is running
Suspecting a Operating system issue, tried to upgrade the other DAG
Even that node is displaying the same symptom and Issues
Tried to install RU1 on both nodes and that too did not fix the issue.
Checked with VM-Ware engineer and he said that every thing from VM-Ware end is fine
Is Anyone have come across the issue before ?

Exchange 2010: Unable to initialize the Information Store
Problem:
Unable to initialize the Information Store service because the clocks on the client and server are skewed. This may be caused by a time change either in the client or the server, and may require a reboot of that computer. Verify that
your domain is properly configured and is currently online.
Solution:
Open a cmd prompt from the Exchange Server as administrator (right mouse click on the command prompt shortcut and select “Run as Administrator”)
Run this command
Net time \\ADServerName /Set
Restart the Microsoft Exchange Active Directory Topology Service
*Important!! You have to restart the Microsoft Exchange Active Directory Topology Service or this fix will not work.. I tried just starting the Information Store service after running the command it it still failed..
This worked for me and all is well on my exchange server.
- See more at: http://www.mountainvistatech.com/2012/06/04/exchange-2010-unable-to-initialize-the-information-store/#sthash.SwQpgQEM.dpuf

Windows listener +service does not start automatically eventhough Automatic

Hi
When I restart the database server, the listener is not starting automatically , so as the service.
Both are set to start automatically.
This was working before and all of a sudden, this problem appeared.
I dont remember changing any setting on the database side but on windows server side, not sure if anything is changed.
The error we received:
============
The OracleServiceGEOOAP service failed to start due to the following error: %%1053 Service error on GEPGPO01-V
The OracleOraDb11g_home1TNSListener service failed to start due to the following error: %%1053 Service error on GEPGPO01-V
alert log
=======
Fatal NI connect error 12638, connecting to:
(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))
VERSION INFORMATION:
TNS for 32-bit Windows: Version 11.1.0.7.0 - Production
Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 11.1.0.7.0 - Production
Time: 11-MAR-2011 15:44:26
Tracing not turned on.
Tns error struct:
ns main err code: 12638
TNS-12638: Credential retrieval failed
ns secondary err code: 0
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0
listener.log
========
Fri Mar 11 15:44:23 2011
11-MAR-2011 15:44:23 * service_update * geop * 0
11-MAR-2011 15:44:29 * service_died * geooap * 12547
TNS-12547: TNS:lost contact
11-MAR-2011 15:44:30 * service_died * geop * 12547
TNS-12547: TNS:lost contact
Fri Mar 11 15:44:37 2011
11-MAR-2011 15:44:37 * (CONNECT_DATA=(SID=GEOOAP)(CID=(PROGRAM=C:\Program Files\Quest Software\Toad for Oracle\toad.exe)(HOST=D00661)(USER=app_nathv))) * (ADDRESS=(PROTOCOL=tcp)(HOST=10.4.136.230)(PORT=65288)) * establish * GEOOAP * 12505
TNS-12505: TNS:listener does not currently know of SID given in connect descriptor
11-MAR-2011 15:44:41 * (CONNECT_DATA=(SID=GEOOAP)(CID=(PROGRAM=C:\Program Files\Quest Software\Toad for Oracle\toad.exe)(HOST=D00661)(USER=app_nathv))) * (ADDRESS=(PROTOCOL=tcp)(HOST=10.4.136.230)(PORT=65289)) * establish * GEOOAP * 12505
TNS-12505: TNS:listener does not currently know of SID given in connect descriptor
11-MAR-2011 15:44:43 * (CONNECT_DATA=(SID=GEOOAP)(CID=(PROGRAM=C:\Program Files\Quest Software\Toad for Oracle\toad.exe)(HOST=D00661)(USER=app_nathv))) * (ADDRESS=(PROTOCOL=tcp)(HOST=10.4.136.230)(PORT=65290)) * establish * GEOOAP * 12505
TNS-12505: TNS:listener does not currently know of SID given in connect descriptor
Fri Mar 11 15:53:46 2011
So now we have to manually restart the listener and service , for the database to be opened. Is it possible to give direction what areas need to check, to solve this issue?
Thanks.

Hi Krithi,
Can you confirm my understanding here:
* Since a short time the automatic startup of the listener and Oracle instance fail.
* You can manually startup the listener and database instance without any problem, and then all runs as expected
so far so good?
What's your procedure to start the listener and DB instances?
Are you performing the startups with your own user account, or SYSTEM, or a dedicated Oracle account?
Are the windows services running under SYSTEM, a dedicated Oracle user....??
Could it be that the system administrator installed something (like a new Oracle client) which would have changed some settings?
Can you compare the environment variables (ORACLE_HOME, ORACLE_SID, PATH) between the account YOU use for manual startup and those for the user account used to (auto)start the services?
Maybe you can try to plan a reboot after you have set the problematic services to run under your profile?
Well.... a few points to investigate if not yet considered.
HTH,
Thierry

Status for the transferred Suppliers is not updated in ROS client!

Hi all,
We are running on SRM 5.0(Sp6).After i transfer the propects from ROS to EBP and when i convert them to VENDOR in EBP,then the status of the suppliers become "RELEASED" in EBP but the status is not updated in ROS client.
What is to be done so that once the prospect is saved as a VENDOR in EBP,its status should be updated /set as RELEASED in ROS client too?
Any help is appreciated...Points will be rewarded.
BR,
Disha.

Deepti / Ramakrishna,
As per Rama's comments, the BP status is released only when we use SUS and the information is passed via XI. However in our case we have ROS (without SUS) and EBP in same client. In this scenario XI is not required to transfer the Business partner status as per OSS note 1134978.
So any idea how do we change the status from ACCEPTED to RELEASED?
Deepti - in one of the thread you did mention about a workaround to update the status? Did you manage to crack it?
Do you recommend having separate client for ROS, so that system automatically trigger XML message by standard?
Regards,
Sandeep Parab

Critical Services Not Starting Automatically & Access to Server occasionally dropping out

For the last few months we have been trying to resolve an issue where access to files on the server (SBS2011 - running domain services, exchange, etc) get so slow or just unresponsive. Logging onto the server is also not possible till it starts responding
again.
We also found that when the server starts, the Netlogon services does not start automatically event though it is set to auto start. There are a number of other services mainly exchange services that do not start as well but it seems this may be due to the
net service not starting.
We have re-installed the OS but this does not seem to have fixed the issue. The environment is a mix of the SBS2011 server, two Windows Server 2003 boxes - one running Terminal Services. The other was being used for SAP but no longer in use. The clients
are mainly XP with a few Windows 7 machines. We are in the process of planning the replacement of the XP machines.

You re-installed SBS2011? - that seems rather drastic. Did you maintain your domain or just set it all up again?
This sounds like a DNS issue but have a look at the event viewer and google/post the Event ID and Source. Given those two you can start to track down the cause and possible fixes at www.eventid.net. Just be aware that SBS2011 has a lot of
"normal" event errors, see http://support.microsoft.com/kb/2483007
You should also run the SBS best practice analyzer and maybe run the "Fix my network" wizard in the SBS console. Also make sure SBS is the DHCP server for the network.
-- Al

SLED date not coming automatically

hi,
As per my client requirement they will enter the production date only in goods receipt and SLED date have to come automatically at GR time. I already maintain the Total shelf life and minimum remaining shelf life in material master.i activated SLED for plant and movement type but SLED date not coming automatically.
If i l enter SLED date more than my Total shelf life period , then system automatically updating the total shelf life period in batch master record. how to avoid this issue? i want whatever shelf life entered in GR should have to recorded not system calculated based on master data(Total-shelf life)
Thanks
Muthuraman.D

Dear all,
i am using internal batch numbers at the time of goods receipt provide me some solution for above issue?.....
Thanks
Muthuraman.D
Edited by: muthuraman d on Nov 7, 2011 12:18 AM

Firefox is not redirecting to given url it is in ideal stage

firefox is not redirecting to given url it is in ideal stage

You can check for problems with preferences and try to rename or delete the prefs.js file and possible numbered prefs-##.js files and a possible user.js file to reset all prefs to the default values.
*http://kb.mozillazine.org/Preferences_not_saved
*http://kb.mozillazine.org/Resetting_preferences
Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
You can try to reset Firefox.
*https://support.mozilla.org/kb/reset-firefox-easily-fix-most-problems
If you reset Firefox then a new profile is created and some of your data (bookmarks, passwords, cookies, form data) is automatically imported and your current profile will be moved to the desktop (Old Firefox Data).
You can recover more data from the old profile (be cautious with doing that).
*https://support.mozilla.org/kb/Recovering+important+data+from+an+old+profile
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

ORA-03135: connection lost contact , Archivelogs not shipping automatically

hi to all,
I m trying to setup oracle dataguard for 10G ; both primary and standby databases are in 10GR2(10.2.0.4).
Archivelogs are not shipping automatically.tnsping to PROD_STBY working fine. Neither Bandwidth issue nor firewall issue.
pfile has following entry :log_archive_dest_2='SERVICE=PROD_STBY reopen=60'
When we do following command on Primary
SQL> select status, Error from v$archive_dest where dest_id=2;
STATUS ERROR
ERROR ORA-03135: connection lost contact
Following is the alert log:
ORACLE Instance PROD - Archival Error. Archiver continuing.
Thu Dec 9 08:37:06 2010
Errors in file /oracle/PROD/saptrace/background/PROD_arc0_12394.trc:
ORA-03135: connection lost contact
Thu Dec 9 08:37:06 2010
FAL[server, ARC0]: FAL archive failed, see trace file.
Thu Dec 9 08:37:06 2010
Errors in file /oracle/PROD/saptrace/background/PROD_arc0_12394.trc:
ORA-16055: FAL request rejected
ARCH: FAL archive failed. Archiver continuing
Thu Dec 9 08:37:06 2010
ORACLE Instance PROD - Archival Error. Archiver continuing.
Trace file:
Error 1041 detaching RFS from standby instance at host 'PROD_STBY.WORLD'
kcrrwkx: unknown error:3135
ORA-16055: FAL request rejected
ARCH: Connecting to console port...
ARCH: Connecting to console port...
*** 2010-12-09 08:37:03.850
Redo shipping client performing standby login
*** 2010-12-09 08:37:03.930 66535 kcrr.c
Logged on to standby successfully
Client logon and security negotiation successful!
tkcrrsarc: (WARN) Failed to find ARCH for message (message:0x2)
tkcrrpa: (WARN) Failed initial attempt to send ARCH message (message:0x2)
ABC: tkrsf_al_read: No mirror copies to re-read data
ARCH : Error 3135 sending stashed buffer
ORA-03135: connection lost contact
*** 2010-12-09 08:37:06.015 60970 kcrr.c
kcrrfail: dest:2 err:3135 force:0 blast:1
Error 1041 detaching RFS from standby instance at host 'PROD_STBY.WORLD'
kcrrwkx: unknown error:3135
ORA-16055: FAL request rejected
ARCH: Connecting to console port...
Thanks & Regards
Dhaanshree

Hi,
according to the errors in your trace file you might be hitting the following bugs:
Bug 6074620 LGWR unconditionally writes to trace file
Bug 7936993 10.2.0.4 Data Guard Physical Recommended Patch Bundle #1Please also look at MOS note:
Step By Step Guide To Create Physical Standby Database Using RMAN [ID 469493.1]and make sure your setup is correct.
Regards.

Automatic DTR Client creation...Please help

Hello All,
Am working on NW2004s. While working on NWDI I notifced that a DTR client automatically gets created having name kinda similar to the tracks that are imported.
Example:
I have a track named APPL_dev. The automatic DTR client created is named as EPT_APPL_D where,
EPT is SID
Question
1. Is this behavior normal? If yes, does it mean that I should access a track using its associated client?
2. Does 'D' stand for development...seems like but I dont wanna assume.....
Please help me understand.
Awaiting Reply.
Thanks & Warm Regards,
Ritu

Hi Ritu,
in addition to Sidharts reply:
EPT should be the CMS domain, not necessarily a SID (unless they are equal).
1. yes, and if you should access the track using the client depends on what you want to do. For normal development you should work in the Development Configuration perspective and the perspective that is relevant for your project types. There you would see the "APPL_dev" configuration, not the client itself.
If you need to do DTR operations then you should use that client, although for some operations on DTR a "general" client (not specific to a configuration) is more useful. (E.g. if you want to delete DCs).
2. Also yes. If you import the "APPL_cons" configuration you should get an EPT_APPL_C client.
Regards,
Marc

Outlook 2013 does not redirect emails to an external email address

I'm trying to redirect incoming outlook emails to my Hotmail account (or gmail) When I set a rule in ECP for my outlook account, it works. However, if I set a local rule from Outlook 2013 Desktop client, I receive in outlook 2013, but it does not redirect
(or forward) to my Hotmail or any non organization email address.
Is there something I should do on server side?
Thanks.

Hi,
I would suggest you to create the corresponding mail contact and select this from the outlook for the redirection rule
Regards from Visit ExchangeOnline |
Visit WindowsAdmin

PORTAL.Home does not redirect to chosen page.

Hello All
I have recently successfully transported my oracle development to another server and unfortunately am left with one rather minor but important problem.
i have a public page with an SSO portlet on it for a user to login to, however when i goto administer and change the default page, a user is still referred to the default Top-level site if no session is opened. and clicking home still does not redirect. I was wondering if anyone could tell me the table where the URL for PORTAL.home is kept so I could edit it manually as it seems the webform is not working. or is it possible to safely deny/delete the builder design time pages completely for client side deployment?
Many Thanks
James

Sorry forgot to state i am working on portal 10.1.4 with DB on 10.1.0.5.

SCEP 2012 definitions not updating on few clients

Hi!
The SCEP 2012 definitions are not updating on few clients. It works for all other machines.
In MPLog i can only see that Signature update on date but not a line saying Signature updated via ...
Its not telling me where it got the updates in past and why its not updating now..
The definitions are pushed via SCCM, WSUS and MS not unc shares.
Which log file i should look for to get some answers why its not updating.
Thanks

Hi,
You can check C:\Windows\WindowsUpdate.log file to find the related error information.
In addition, did you configure an automatic deployment rule to deliver definition updates? If yes, I recommend you to make sure that all the clients are in the collection.
Best regards,
Susie

CWA NOT REDIRECT AUTOMATIC IN CLIENT WEBBROWSER

Similar Messages

Maybe you are looking for