CWA page does not redirect
Hi there,
I am having strange issue.
I have configured a wlan with Mac Filtering that is pointing to ISE. Followed this guide https://supportforums.cisco.com/docs/DOC-26442
Now, when user tries to connect to the wlan, it gets stuck in DHCP_REQD state. On troubleshooting I found that the ISE authenticates with Wireless MAB policy and points to the authorization profile where CWA redirect is configured. The WLC receives the redirect acl with redirect url but does not apply it on the client.
On ISE:
On WLC:
the ACL "tempcwa" allows traffic to and from ISE, DNS, DHCP, but I am not able to get IP. Even when I try manual IP address, I am not able to ping ISE. I am sure ACL is all ok! My DHCP works perfect for other WLANs with WLC webauth settings in the same subnet as CWA.
I am using AIR-CT5760, 03.02.02.SE, ct5760-ipservicesk9 and ISE 1.2 VM
Please help me!!
Thanks for your response..
If I remove the ACL then how the traffic destined to ISE will be allowed? The interesting part is, I am getting hits on the redirect ACL but client can not receive IP address.
DHCP is working fine and if I assign manual IP then DHCP is not the matter.
If Redirect ACL and ISE page is forwarded to WLC from ISE then why this is not working for clients??
Moreover, I noticed that even DACL is not being pushed to wireless clients from other authorization profiles. The traffic gets Permit_access but DACL does not restrict..
I think these two issues are interlinked..
Please suggest..
Similar Messages
-
PORTAL.Home does not redirect to chosen page.
Hello All
I have recently successfully transported my oracle development to another server and unfortunately am left with one rather minor but important problem.
i have a public page with an SSO portlet on it for a user to login to, however when i goto administer and change the default page, a user is still referred to the default Top-level site if no session is opened. and clicking home still does not redirect. I was wondering if anyone could tell me the table where the URL for PORTAL.home is kept so I could edit it manually as it seems the webform is not working. or is it possible to safely deny/delete the builder design time pages completely for client side deployment?
Many Thanks
JamesSorry forgot to state i am working on portal 10.1.4 with DB on 10.1.0.5.
-
JSP error page does not displayed on its own, includes in the original JSP
Problem Description: - Exceptions in a Condition cause pages to fail to render.
The actual issue is, the JSP error page does not displayed on its own, included in the original JSP Page when exception occurs.
Problem Cause: As per the JSP specification when jsp content reached the buffer size (default 8KB) the page being flushed (Part of condent displays). The default �autoFlush� value is true.
When the page buffer value is default size (8KB), and if any exception occurs after flushing the part of the content, instead of redirecting into error page, the error page content included in the original page.
If i specify autoFlush="false" and with default buffer size, at the runtime if the buffer size is reached, i am getting stackoverflow error.
To solve the above problem we can make it autoFlush=�false� and buffer=�100KB�. But we can�t predict the actual size of the page.
I found in one of the weblogic forum as no solution for this issue. Ref.
http://support.bea.com/application?namespace=askbea&origin=ask_bea_answer.jsp&event=link.view_answer_page_clfydoc&answerpage=solution&page=wls/S-10309.htm
Please provide me any solution to resolve the problem.Error-Page tags work best with an error.html pages. If you have an error.jsp page what I would do, and I have, is wrap my classes and jsp pages in a try catch block where you forward to the error jsp page and display anything you want. YOu can also do this with if else statements. I have used the tomcat error pages before but when I've implemented them I used java.lang.Exception as the error to catch not Throwable. I don't know if this would make a difference or have anything to do with your problem.
-
I am by no means a SharePoint developer, but I really wanted to customize the discussion board for my site - so I found this link: http://www.codeproject.com/Articles/733164/How-to-create-HelpDesk-on-SharePoint-Online
I added the columns, like the article said, and then completed the section "Modification of the discussion board views". I skipped the workflow stuff because while I think it would be useful I wanted to make sure I could get
the actual customization of the discussion board to work first.
My Problem (Just to preface - I followed the above instructions, including disabling the Minimal Download Strategy):
When I clicked into my discussion board list, I was able to get it to look and function as described for both the subject and flat views. However, when I click on the Subject, from the Discussion Board Web Part on my Home Page, it does not redirect into the
Discussion Board List Flat View. Instead, it tries to open the root folder from the Home Page while still using the subject view. The outcome being an empty discussion board on the Home Page.
So I decided to create a whole new discussion board to see if that one would work, when I inserted a new Discussion Board Web Part into the Home Page, newly created from the app menu, it used the same custom JS file(plumTickets), even though I never linked
the discussion board to the JS file. Of course when I went into the newly created Discussion Board list it opened as it does OOTB.
I am so close it having this work like I have been envisioning. I just need users to be able to click on a discussion subject from the Home Page and be redirected to the list view of the parent folder (I think that is the correct terminology,
but it may not be) so they would be able to see any replies and be able to reply. Please Help Me!!!
I truly appreciate any help you are able to provide, thank you!I figured it out. I was using ?FilterField1=fieldname&FilterValue1=value on the URL to the page to pick out one project number. The web part I was trying to add was for a list that did not have that particular fieldname. I didn't realize that would matter
since I was using the Connections -> Get Filter Values From to get my filter values from the main web part, which does have that fieldname.
I added a field with that fieldname to the other list and set a workflow to copy the lookup value of the project number lookup field into the new field. Now all is working fine. Sorry for the wild geese in my original question. -
Form does NOT redirect to PayPal!
Hello! Our form in the majority of cases does NOT redirect to PayPal. What we need to do?
Hi,
One thing that could help is to look at the info in the agent logs, first increase Debug Logging Level, then restart the agent server and click thru your app, then look in agent runtime logs which should have more descriptive errors. For more detail on how to do this, try http://wikis.sun.com/display/OpenSSO/GlassFishAgentTrouble#GlassFishAgentTrouble-generaltips
You could look on this page, which is mostly based on GlassFish server but could help for other servers as well.
http://wikis.sun.com/display/OpenSSO/GlassFishAgentTrouble
I have not installed either of the policy agents you mentioned. But with some of the other agents, like the Sun App server 9 (GlassFish) agent, it comes with a sample application, and I find that this is the best way to ensure your setup is good and you are following all steps etc. Once sample app is up, you can try your own apps with confidence.
Since you already have the SJSAS 9 installed, maybe you could create a new domain and download/install the SJSAS 9 policy agent on the new domain. Then try out the sample app?
Or if those other agents have a sample app then try it out.
hth,
Sean -
Button that does not redirect to url
can i create button that does not redirect to url
to perform a function or action on page, for instance
i want button to call plsql function but not redirect
Message was edited by:
windoHi,
Yes you can...
When you create the button, don't set anything for the page / URL redirect. Then go to your pl/sql process definition and set it to fire "when button pressed..." Finally, just make sure you either have a branch set, as a default, redirecting back to your current page or create a branch specifically for "when button pressed..." as well. I usually create a default branch back to the current page for any page that can be submitted with a sequence of 999 (and no conditions) so that it is (usually) the last redirect that is evaluated. This will always save the error "No page to redirect to..." and also saves creating a bunch of unnecessary branches
Hope this helps,
Mike -
My New Tab Page does not work at all. I just have the empty squares with nothing in them at all?
I know how to use about:config & have had the usual problems with newtab page tiles but this is more like a bug- using 33.0.1. Doesn't show tiles icon in top right corner just shows a gear that is used to hide the empty tiles that I can't fill with sites. First it would only show 2 rows of 4 columns even though I had it set to 5 & 6 then few days later for no reason they went empty with a serrated line around the tiles & can't drag from the bookmarks---- really bloody annoying!!!!!!! Possibly a setting in the about:config but i can't fig it out?Reset Firefox to its default state
If you're having major problems which you can't resolve, start fresh with only your essential information.
Troubleshooting Information
This page contains technical information that might be useful when you're trying to solve a problem. If you are looking for answers to common questions about Firefox, check out our support website.
Application Basics
Name Firefox
Version 33.0.1
Update History
User Agent Mozilla/5.0 (Windows NT 6.1; WOW64; rv:33.0) Gecko/20100101 Firefox/33.0
Profile Folder
Enabled Plugins about:plugins
Build Configuration about:buildconfig
Memory Use about:memory
Multiprocess Windows 0/1
Crash Reports for the Last 3 Days
Report ID Submitted
All Crash Reports
Extensions
Name Version Enabled ID
Adblock Plus 2.6.5 true {d10d0bf8-f5b5-c8b4-a8b2-2b9879e08c5d}
Adblock Plus Pop-up Addon 0.9.2 true [email protected]
Skype Click to Call 7.3.16540.9015 true {82AF8DCA-6DE9-405D-BD5E-43525BDAD38A}
Trend Micro BEP Firefox Extension 8.0.0.1173 true [email protected]
Trend Micro NSC Firefox Extension 6.8.0.1120 true {22C7F6C6-8D67-4534-92B5-529A0EC09405}
Trend Micro Toolbar 7.0.0.1243 true {22181a4d-af90-4ca3-a569-faed9118d6bc}
Graphics
Adapter Description Intel(R) HD Graphics
Adapter Drivers igdumd64 igd10umd64 igdumdx32 igd10umd32
Adapter RAM Unknown
Device ID 0x0046
Direct2D Enabled true
DirectWrite Enabled true (6.2.9200.16571)
Driver Date 1-30-2013
Driver Version 8.15.10.2993
GPU #2 Active false
GPU Accelerated Windows 1/1 Direct3D 11 (OMTC)
Vendor ID 0x8086
WebGL Renderer Google Inc. -- ANGLE (Intel(R) HD Graphics Direct3D9Ex vs_3_0 ps_3_0)
windowLayerManagerRemote true
AzureCanvasBackend direct2d
AzureContentBackend direct2d
AzureFallbackCanvasBackend cairo
AzureSkiaAccelerated 0
Important Modified Preferences
Name Value accessibility.blockautorefresh true
accessibility.typeaheadfind.flashBar 0
browser.cache.disk.capacity 358400
browser.cache.disk.smart_size_cached_value 358400
browser.cache.disk.smart_size.first_run false
browser.cache.disk.smart_size.use_old_max false
browser.cache.frecency_experiment 1
browser.places.smartBookmarksVersion 7
browser.sessionstore.upgradeBackup.latestBuildID 20141023194920
browser.startup.homepage www.google.com
browser.startup.homepage_override.buildID 20141023194920
browser.startup.homepage_override.mstone 33.0.1
browser.tabs.loadInBackground false
dom.mozApps.used true
extensions.lastAppVersion 33.0.1
font.internaluseonly.changed true
gfx.direct3d.last_used_feature_level_idx 1
keyword.URL http://www.bing.com/search?FORM=UP97DF&PC=UP97&q=
media.gmp-gmpopenh264.lastUpdate 1413750166
media.gmp-gmpopenh264.version 1.1
media.gmp-manager.lastCheck 1414375733
network.cookie.prefsMigrated true
places.database.lastMaintenance 1414404204
places.history.expiration.transient_current_max_pages 102059
plugin.disable_full_page_plugin_for_types application/pdf
plugin.importedState true
plugin.state.npmedia 0
plugin.state.nptimegrid 1
print.printer_Canon_MG2100_series_Printer.print_bgcolor false
print.printer_Canon_MG2100_series_Printer.print_bgimages false
print.printer_Canon_MG2100_series_Printer.print_colorspace
print.printer_Canon_MG2100_series_Printer.print_command
print.printer_Canon_MG2100_series_Printer.print_downloadfonts false
print.printer_Canon_MG2100_series_Printer.print_duplex 3997817
print.printer_Canon_MG2100_series_Printer.print_edge_bottom 0
print.printer_Canon_MG2100_series_Printer.print_edge_left 0
print.printer_Canon_MG2100_series_Printer.print_edge_right 0
print.printer_Canon_MG2100_series_Printer.print_edge_top 0
print.printer_Canon_MG2100_series_Printer.print_evenpages true
print.printer_Canon_MG2100_series_Printer.print_footercenter
print.printer_Canon_MG2100_series_Printer.print_footerleft &PT
print.printer_Canon_MG2100_series_Printer.print_footerright &D
print.printer_Canon_MG2100_series_Printer.print_headercenter
print.printer_Canon_MG2100_series_Printer.print_headerleft &T
print.printer_Canon_MG2100_series_Printer.print_headerright &U
print.printer_Canon_MG2100_series_Printer.print_in_color true
print.printer_Canon_MG2100_series_Printer.print_margin_bottom 0.5
print.printer_Canon_MG2100_series_Printer.print_margin_left 0.5
print.printer_Canon_MG2100_series_Printer.print_margin_right 0.5
print.printer_Canon_MG2100_series_Printer.print_margin_top 0.5
print.printer_Canon_MG2100_series_Printer.print_oddpages true
print.printer_Canon_MG2100_series_Printer.print_orientation 0
print.printer_Canon_MG2100_series_Printer.print_page_delay 50
print.printer_Canon_MG2100_series_Printer.print_paper_data 1
print.printer_Canon_MG2100_series_Printer.print_paper_height 11.00
print.printer_Canon_MG2100_series_Printer.print_paper_name
print.printer_Canon_MG2100_series_Printer.print_paper_size_type 0
print.printer_Canon_MG2100_series_Printer.print_paper_size_unit 0
print.printer_Canon_MG2100_series_Printer.print_paper_width 8.50
print.printer_Canon_MG2100_series_Printer.print_plex_name
print.printer_Canon_MG2100_series_Printer.print_resolution 7602290
print.printer_Canon_MG2100_series_Printer.print_resolution_name
print.printer_Canon_MG2100_series_Printer.print_reversed false
print.printer_Canon_MG2100_series_Printer.print_scaling 1.00
print.printer_Canon_MG2100_series_Printer.print_shrink_to_fit true
print.printer_Canon_MG2100_series_Printer.print_to_file false
print.printer_Canon_MG2100_series_Printer.print_unwriteable_margin_bottom 0
print.printer_Canon_MG2100_series_Printer.print_unwriteable_margin_left 0
print.printer_Canon_MG2100_series_Printer.print_unwriteable_margin_right 0
print.printer_Canon_MG2100_series_Printer.print_unwriteable_margin_top 0
privacy.sanitize.migrateFx3Prefs true
privacy.sanitize.timeSpan 2
storage.vacuum.last.index 1
storage.vacuum.last.places.sqlite 1412311800
Important Locked Preferences
Name Value
JavaScript
Incremental GC true
Accessibility
Activated false
Prevent Accessibility 0
Library Versions
Expected minimum version Version in use
NSPR 4.10.7 4.10.7
NSS 3.17.1 Basic ECC 3.17.1 Basic ECC
NSSSMIME 3.17.1 Basic ECC 3.17.1 Basic ECC
NSSSSL 3.17.1 Basic ECC 3.17.1 Basic ECC
NSSUTIL 3.17.1 3.17.1
Experimental Features
Name ID Description Active End Date Homepage -
The edit JSP page does not appear...
Hi!
I make a simple JSF application, I would like to show a DB table in a h:dataTable component and edit a given row after click, but the edit JSP page does not appear. I click the on link in the table, but the list is loaded again and not the edit page...:(
(no exception in application server console)
Please help me!
my code:
**************************************** listmydata.jsp***************************
<h:dataTable
value="#{myBean.myDataList}"
var="myDataItem"
binding="#{myBean.myDataTable}"
>
<h:column>
<f:facet name="header">
<h:outputText value="Ajdi"/>
</f:facet>
<h:commandLink action="#{myBean.editMyData}">
<h:outputText value="#{myDataItem.id}"/>
</h:commandLink>
</h:column>
********************************* MyBean.java *******************************
package bean;
import java.sql.Connection;
import java.sql.SQLException;
import java.util.ArrayList;
import java.util.List;
import javax.faces.component.html.HtmlDataTable;
import javax.faces.context.FacesContext;
import javax.naming.InitialContext;
import javax.naming.NamingException;
import javax.sql.DataSource;
import wrapper.MyData;
public class MyBean {
private List myDataList;
private HtmlDataTable myDataTable;
private MyData myDataItem;
protected Connection Conn;
// *********************** actions ***********************
public String editMyData() {
myDataItem = (MyData)getMyDataTable().getRowData();
return "editmydata";
public String saveMyData() {
try {
updateDataInDB();
catch (SQLException e) {
System.out.println(e);
System.err.println(e);
e.printStackTrace();
catch (NamingException e) {
System.out.println(e);
System.err.println(e);
e.printStackTrace();
return "listmydata";
// *********************** setter ***********************
public void setMyDataList(List myDataList) {
this.myDataList = myDataList;
public void setMyDataTable(HtmlDataTable myDataTable) {
this.myDataTable = myDataTable;
public void setMyDataItem(MyData myDataItem) {
this.myDataItem = myDataItem;
// *********************** getter ***********************
public List getMyDataList() {
if (myDataList == null || FacesContext.getCurrentInstance().getRenderResponse()) {
loadMyDataList();
return myDataList;
public HtmlDataTable getMyDataTable() {
return myDataTable;
public MyData getMyDataItem() {
return myDataItem;
// *********************** others ***********************
public void loadMyDataList() {
try {
getDataFromDB();
catch (NamingException e) {
System.out.println(e);
System.err.println(e);
e.printStackTrace();
catch (SQLException e) {
System.out.println(e);
System.err.println(e);
e.printStackTrace();
void getDataFromDB() throws NamingException, SQLException {
myDataList = new ArrayList();
java.sql.PreparedStatement PreStat = ownGetConnection().prepareStatement("SELECT id, name, value FROM BEA_JSF_SAMPLE");
PreStat.execute();
java.sql.ResultSet Rs = PreStat.getResultSet();
while(Rs.next()) {
MyData OneRecord = new MyData();
OneRecord.setId(Rs.getLong(1));
OneRecord.setName(Rs.getString(2));
OneRecord.setValue(Rs.getString(3));
myDataList.add(OneRecord);
void updateDataInDB() throws SQLException, NamingException {
String sql = new String("UPDATE BEA_JSF_SAMPLE SET name=?,value=? WHERE id=?");
java.sql.PreparedStatement PreStat = ownGetConnection().prepareStatement(sql);
PreStat.setString(1,myDataItem.getName());
PreStat.setString(2,myDataItem.getValue());
PreStat.setLong(3,myDataItem.getId().longValue());
PreStat.execute();
ownGetConnection().commit();
Connection ownGetConnection() throws SQLException, NamingException {
if (Conn == null) {
InitialContext IniCtx = new InitialContext();
DataSource Ds = (DataSource)IniCtx.lookup("JDBCConnectToLocalhost_CRS");
Conn = Ds.getConnection();
return Conn;
******************************* editmydata.jsp *****************************
<%@ page language="java" contentType="text/html;charset=UTF-8"%>
<%@ taglib prefix="f" uri="http://java.sun.com/jsf/core"%>
<%@ taglib prefix="h" uri="http://java.sun.com/jsf/html"%>
<html>
<body>
<f:view>
<h:form>
<h:panelGrid columns="2">
<h:outputText value="Name"/>
<h:inputText id="name" value="#{myBean.myDataItem.name}"/>
<h:outputText value="Value"/>
<h:inputText id="value" value="#{myBean.myDataItem.value}"/>
</h:panelGrid>
<h:commandButton action="#{myBean.saveMyData}" value="Save"/>
</h:form>
</f:view>
</body>
</html>I have put his lines in the faces-config.xml and now it works:
<navigation-rule>
<from-view-id>*</from-view-id>
<navigation-case>
<from-outcome>editmydata</from-outcome>
<to-view-id>editmydata.jsp</to-view-id>
</navigation-case>
</navigation-rule>
<navigation-rule>
<from-view-id>*</from-view-id>
<navigation-case>
<from-outcome>listmydata</from-outcome>
<to-view-id>listmydata.jsp</to-view-id>
</navigation-case>
</navigation-rule>
I don't understand, that I define the next JSP page in the bean java file, which must be shown, but I must define this in the faces-config.xml as well.
for example:
public String editMyData() {
myDataItem = (MyData)getMyDataTable().getRowData();
return "editmydata";
is it right or Do I make a mistake somewhere? -
The Report Server page comes up on local server, but the page does not open from clients
Hello,
The Report Server Page opens up just fine on the local server, but page does not open up from desktops and client PCs. SSRS is installed on a Windows Server 2008 R2 server and with SQL Server 2008 R2 SP2
Clients are using IE 11 and they see:
Oops! Internet Explorer could not connect to tumdv-fsql01
How can make this site accessible from clients?
Thanks
PaulThat did not work.
What port numbers specifically does SSRS use? I will check the firewall.
http://100.100.100.100/CengeaReports/Pages/Folder.aspx
When I add the IP Address and try the link again, IE says "This page can not be displayed". When I try the Fix connection problems, IE says:
"The website is online, but it is not responding to connection attempts."
Paul -
Dynamic Portal Page does not show but called procedure behind it works
Hi I run into a bug that I try to solve unsuccessfully for 2,3 weeks. Here is the problem. I have portal dynamic page that execute a PL/SQL procedure to delete and insert data into a remote app table. When I compile and execute the procedure in Toad it does not give me any error or warning. But when I execute this procedure in my dynamic page the page does not show up but I check the results and data does delete and insert. So my procedure works behind the scene but the page does not display. As I look into detail of my code I found out that when I rem out the insert statement my page does show up and delete the data but when I put back the insert statement my page does not show up and data insert to the table. Here is my code structure of my procedure in plain words. I have a procedure that have a cursor for loop that
check if a certain condition exists if it is then it will delete data from the remote app table then insert a select statement data from 2 joins tables. Any one have run into similar situations like this and have any idea, please help. Thank you all.The scripts for this should have shown as:
-
Hi, since I installed the latest update on my Mac I have been unable to open the contents of some emails because it is saying that pages does not recognise the font. For example it is saying 'some features aren't supported, the font Calibri isn't available on OS X. It was replaced with TrebuchetMS' This means that I cannot open letters from my daughters school. Is there any way round this other than getting rid of this nightmare MAC and going back to Windows!?
http://www.mozilla.com/en-US/firefox/3.6.13/releasenotes/
Had the same problem; would have been nice if they had told s that we need an intel processor on our older Macs! I am up and running again. -
Page does NOT load correctly in FIREFOX
My HOME page does not RELOAD correctly in FIREFOX when when
the link is clicked on from another page in my little "2 page"
site.
BUT if I click on the BACK button it loads CORRECTLY
It works correctly in IE
Here is the Home page:
http://www.quicksubmitbrokerswholesale.com/
Here is page 2 where clicking on the link in FIREFOX loads
incorrectly:
http://www.quicksubmitbrokerswholesale.com/submitforpricing.html
What do I need to TWEAK to make it work OK in FIREFOX?
Thanks in advanceHere is the crux of all your problems:
<!-- Fireworks 4.0 Dreamweaver 4.0 target.
You built the site in Fireworks, and a very old version at
that, and then
imported the site into DW. Graphics apps like Fireworks and
Photoshop
produce bloated, convoluted code and fragile structures. If
you want a
worthwhile site you will have to start over. Create only your
graphics in FW
and build the entire site in DW. Be cautioned though such an
old version of
DW won't produce a site consistent with today's standards.
You really should
upgrade if you want to deliver value to your client.
Walt
"electro-dud" <[email protected]> wrote in
message
news:gb2k07$9v4$[email protected]..
> My HOME page does not RELOAD correctly in FIREFOX when
when the link is
> clicked
> on from another page in my little "2 page" site.
> BUT if I click on the BACK button it loads CORRECTLY
>
> It works correctly in IE
>
> Here is the Home page:
>
http://www.quicksubmitbrokerswholesale.com/
>
> Here is page 2 where clicking on the link in FIREFOX
loads incorrectly:
>
http://www.quicksubmitbrokerswholesale.com/submitforpricing.html
>
> What do I need to TWEAK to make it work OK in FIREFOX?
>
> Thanks in advance
>
> -
When I click on the tab with a + on it, located next to the active tab a new page does not open. If I click on "New Tab" in the File menu a new tab does not open.
Hi jcatx2013, we don't really have enough information on your system to make specific suggestions...
Could you test in Firefox's Safe Mode? That's a standard diagnostic tool to bypass interference by extensions (and some custom settings). More info: [[Troubleshoot Firefox issues using Safe Mode]].
You can restart Firefox in Safe Mode using
Help > Restart with Add-ons Disabled
In the dialog, click "Start in Safe Mode" (''not'' Reset)
Any difference? -
When I open a new website, the page does not open, instead it places a tab in the bottom task bar? How can I change the settings so as when I open a new website the page is automatically displayed on my desktop. Thank You!
Tools > Options > Tabs - is the last preference there check-marked??
-
When I click to open Mozilla icon on my desktop, the page does not open & I cannot access it unless I type it in an Internet Explorer page? When clicking on the Icon sometimes it will flash to the right of my desktop screen but does not open for access.
Hi Dave, thanks for your answer.
I have tried a several times to repairing permissions, restarting the mac, relaunched Finder, but no difference.
I copied the download folder to the dock...there I can open the files, but not deleting them or copying them.
When I open finder, then I click on the folder Download, after a while of thinking, it throws me out and back to the desktop.
already tried to sign in with the guest user account, then I am able to open the download folder.(but not seeing my files)
When I am trying to change the download folder in Safari, it also throws me out and gives me a error report ,for sending to Apple.
I think it's a settings fault or i think my download folder is locked. Almost desperat, already called support center,
They couldn't help, for free, due the 90 days free online help i have reached. If I want to solve this problem, they could try it , but it cost me almost 50 euros.
hope there is someone, who's knowing this problem.
By the way, I think it also could be that I dragged some downloaded music to the desktop, and dragged some folder that has the settings. Now its changed???
Or I was downloading something, and deleted the files in the download folder while it was unpacking and reparing the files.
It's not easy for a beginner Mac user (3 months) to already solve this problems.
Can you follow me? And seems this problem familiar to you?
Thanks in advance
Maybe you are looking for
-
Want to convert function in SQL Server 2000
Hi , i am writing this function in oracle.Could you please convert this function in SQL Server 2000 because i am new in this and dont know how to use decode function in sql. Please following is the code for oracle. CREATE OR REPLACE function fun ( lo
-
Hp Pavilion dv4 Fan doesnt work properly
I cleaned the fan in my laptop, it was making big noise. I cleaned and put it again, there is no noise now but I think it works slow speed so my laptop is heatining in a few minutes. What should I do? let me replace to a new fan? also i dont know ex
-
Outbound delivery replication in target system
Hi, I want to replicate an outbound delivery in the target system through IDOC. but when i use standard IDOC Message type DESADV alongwith standard output type LALE, then it does'nt get replicated and an Inbound delivery gets created instead in the
-
I had been using an old iTunes program. This was with Snow Leopard. I bought a Nano 7, but it wouldn't work with the old iTunes. I upgraded to the newest edition, but then iTunes wouldn't open. I was told by Apple that the computer shouldn't have
-
Date function not returning any rows
I am trying to pull back rows for data of people who were born in the 90s a.birthday >= to_date('01/01/90','dd/mm/yy') and a.birthday <= to_date('31/12/90','dd/mm/yy') I know that there is definately users born in the 90s in