Cwa url-redirect does not work

Hello experts,
I have ise with WLC , i m configuring CWA for wireless guest users. the issue is, while i try to connect to Guest-Wifi and try to open a brower to be redirected to my ise guestportal, but it is geting redirected.
What can be the issue ?

Hi Imran
Please make sure that you have defined Security Group Access (SGA)-enabled devices in Cisco ISE and you have added WLC to this SGA to process requests from SGA-enabled devices that can be part of the Cisco SGA solution. Any device that supports the Security Group Access solution is an SGA-enabled device.
SGA devices do not use the IP address. Instead, you must define other settings so that SGA devices can communicate with Cisco ISE.

Similar Messages

Does using self-signed cert. on ISE server has anthing to do with url redirect being not working

Hi,
I am setting up wired ISE environment. Everything is going fine, except url redirect is not working.
I just wondering, if using self-signed certificate on ISE server has anothing to do with the problem ?.
Appreciate your input.
Thanks

Hi,
As long as you have not changed the hostname or the domain name (and dns is accurate). You should only receive the certificate warning but still get redirected without any issues.
Thanks,
Tarik Admani
*Please rate helpful posts*

Bad URL fix does not work

Bad url fix does not work, Skype still crashes when this string has been sent to group chat. People on the group chat are unable to load up Skype properly.

frank604 wrote:How are you suspending? As rdahlgren requests, can you manually try to suspend and post output of useful logs here?
I use the built-in suspend mechanism in KDE 4.12. The problem appeared on all my computers

Muse site on BC - URL Redirects list not working

Hello. A Muse site has just gone live on BC host.
The URL redirects don't appear to be working.
Doing a Google search on 'parkerandassociates.co.nz Amy Williamson' gives a result leading to http://www.parkerandassociates.co.nz/people/amy-williamson/ From the screen grab below the Redirect is showing that this should be working, but in reality the page is not being found. I tried several times to edit the Action and also imported the Import Redirect Urls method and it imported successfully.
My import file was CSV and had one row for consisting of the following columns Old Url (= /people/amy-williamson/) New URL (/amy-williamson.html) Enabled (True). I wasn't quite sure what to put in the columns for Enabled, so I put 'True' as shown below. But still the redirection is not working.
Can anybody tell me where I could be going wrong?
Cheers
Grant

Hi Grant Senior,
Update the source of the redirect from /people/amy-williamson/ to /people/amy-williamson/index.html and the URL http://www.parkerandassociates.co.nz/people/amy-williamson/ should then redirect successfully. This is because BC sees the source as a directory and not an actual page.
I have done this for http://www.parkerandassociates.co.nz/people/amy-williamson/ on your behalf, and can confirm that it is now working.
Cheers.

Concatenating a string in a URL syntax does not work (syntax error)

I am trying to print a Report in PDF format. The code is:
select '<a href="http://oasdev.oh.gov./reports/rwservlet?GDMS_ACR&Y='||:P106_YEAR||'&B='||:P100_BUSINESS_UNIT_ID||'&C='||:P106_COMMISSION_ID||'&d=('||TO_CHAR(SYSDATE,'MMDDYYYYhhMISS')||')", target=_new> Print PDF Version of the report </a>' url from dual
GLOBAL_URL should carry the value ( a sring) ----> http://oasdev.oh.gov.
Therefore I changed it to the following code:
select '<a href="GLOBAL_URL/reports/rwservlet?GDMS_ACR&Y='||:P106_YEAR||'&B='||:P100_BUSINESS_UNIT_ID||'&C='||:P106_COMMISSION_ID||'&d=('||TO_CHAR(SYSDATE,'MMDDYYYYhhMISS')||')", target=_new> Print PDF Version of the report </a>' url from dual
But it does not work. Any suggestion would be highly appreciated.
Thanks in advance.
Gouri
Edited by: user1046395 on Dec 8, 2010 8:41 AM

When you do a select, you need to select into a variable..
select ' Print PDF Version of the report ' url INTO <Variable>from dual
Are you trying to run an Oracle Report from APEX??
If so look at this thread: Using popupURL to call Oracle Reports - Problem passing parameters
Thank you,
Tony Miller
Webster, TX
When you have enough clowns, you have a circus.

WCCP does not work between WSA and ASA

I have configured WCCPv2 between WSA S160 ( 6.3.1-025) and ASA5540 (8.2(1)109).
Everything seems to be OK by "show wccp *" on ASA and showing wccp debugging messages (level 4) on S160. Despite of it, WCCP redirection does not work.
If I use packet-capture I figure out that S160 receives GRE packets with TCP SYN from particular LAN host to WWW sites but S160 does not handle them and does not send anything back to ASA.
It is an Exempt from authentication for this LAN host and in Forward proxy mode everything works well.
I have attached an example of a packet-capture (S160.txt - renamed from .cap) and debugging messages from S160 & "show" from ASA.
Does anybody have any idea what the problem is and how I can resolve it ?

IronPort Support team helped me to find the trouble:
If I wish to handle specific port's (80, 8080, etc.) traffic by the transparent proxy I need to configure this port like a listener for the FORWARD proxy
("Security Services" -> "Proxy Settings" -> "HTTP Ports to Proxy")
The WSA guide doesn't clearly say about it.
So the Discussion can be closed ...

URL Does Not Work in Firefox, but DOES Work in Other Browsers

The following URL does NOT work in Firefox. However, it DOES work in Internet Explorer and Google Chrome:
https://www.ascap.com/ace/
The main ASCAP URL works just fine. The problem seems to be confined to this link alone. Please fix; thank you!

There is a server redirect on this URL.
<pre><nowiki>
https://www.ascap.com/ace/
GET /ace/ HTTP/1.1
Host: www.ascap.com
HTTP/1.1 302 Found
Location: https://www.ascap.com/Home/ace-title-search/index.aspx</nowiki></pre>
If you use a bookmark then try to navigate to the want page starting with the main (home) page.
You can reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Hold down the Shift key and left-click the Reload button
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (Mac)
Clear the cache and remove cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"

CWA using customized portal does not work IPAD 2

Hi all,
I have another interesting case that I have been testing for more than a month but it is not working. Cisco provides templates to create the customized portals for LWA or CWA. However, Success Page HTML does not work on LWA and Cisco ISE uses internal default success page.
On my specific case, we need to move from LWA to CWA in order to minimize the number of redirections and the customized portal for login and AUP work fine BUT when the SUCCESS PAGE is presented on the IPAD, the button on the top right corner never changes from CANCEL to DONE even though the Authentication is successful. We modified multiple times the HTML Files following Cisco Templates and the following link (which looks like has an error) with the same incorrect behavior. Only works if I click the go back arrow on the IPAD so I move back to the AUP page (not an acceptable workaround).
Reference Link:
http://www.cisco.com/c/dam/en/us/td/docs/security/ise/how_to/HowTo-42-Customize_ISE12_Web_Portals.pdf
In the link, Cisco mentions version 1.2.0.899 patch 8 as the version to be used on the ISE devices running the customized templates. However, we recently moved from 1.1.3.124 to 1.2.1.198 patch 3. I created a brand new VM running 1.2.1.198 patch 3, imported the cisco templates for login, AUP, success and error and I am still getting the same problem on IPAD 2 for SUCCESS PAGE even though I am using Cisco Templates.
I could give a try configuring another VM running 1.2.0.899 patch 8 and use the Cisco templates + IPAD 2 but that is not a good solution.
Have anyone experienced the same problem?
thanks

I opened a case with Cisco TAC, let's see what happens. In the meantime, I created a VM ISE which will be running 1.2.0.899 patch 8 so I will upload the Cisco HTML Files on it and see it this option works properly on IPAD 2, IPAD 4, Chromebook, Win 7 and Samsung Tablets.

URL for Downloading Licensed FlashPlayer Does Not Work

I reapplied for a license to distribute FlashPlayer back in October and was granted a license and a specific URL to download FlashPlayer for distribution on our intranet. The URL does not work and instead of downloading FlashPlayer the only option is to apply for another license. I attempted to engage Adobe via Chat and they said I have to post here, but this does not make a lot of sense since the email with the license said the URL for downloading may not be shared with anyone, hence why I am not posting here.
So have others received a license from Adobe with a non-working URL? How did you get someone at Adobe to respond?

Hi Eddie,
I will forward this to the Licensing folks and will post back when I have a response.
Maria

At the top of my Mozilla home page, it lists the current URL site I am on. How do I delete them and the others in the drop down box? Highlighting and hitting delete does not work

At the top of my Mozilla home page, it lists the current URL site, such as http://www.safeco.com, I am on plus the others in the drop down box. How do I delete them. Highlighting and hitting delete does not work.
I am using windows Vista 007 and Mozila 3.6.1.3

Do those entries have a yellow star at the far right?
If they have then they are bookmarks. You can remove them if you open that link and click the star to open the Edit This Bookmark dialog and click the Remove button in that dialog.
* [[Clearing Location bar history]]
* [[Cannot clear Location bar history]]

Logout does not work in OIM after enabling OAM SSO

We have installed a webgate to protect xlWebApp in OIM. Once the SSO is enabled, the logout does not work in the OIM user interface. How to solve this issue?
Metalink has a solution where we need to add document.location="http://host:port/access/oblix/lang/en-us/logout.html"; in xlWebApp\tiles\tjspLogoffTiles.jsp. This is the logout URL of OAM. Is there any other way so we can have a logout page in the OIM application/server itself?
Thanks.

Kevin,
I did what you suggested and initially it looked like it is working but there is slight issue. When I click Logout, it redirects to the logout screen. After logging out when I try to access xlWebApp it prompts for the login (i am using basic authentication). If I cancel it and again try to access xlWebApp, it lets me in without any prompt. This issue is in IE only but not in Firefox. Not sure what's the issue.
Btw, to make the logout screen work, I had to unprotect the following with None Authentication:
- /xlWebApp/pages/logout.html (logout page)
- /xlWebApp/images
- /xlWebApp/css/Xellerate.css
- /xlWebApp/css/style.css
Thanks.
Edited by: user504421 on Mar 16, 2009 9:52 AM
Edited by: user504421 on Mar 16, 2009 10:00 AM
Edited by: user504421 on Mar 16, 2009 10:01 AM

Insert in Tabular form does not work after the upgrade to APEX 4.0

Hi all,
Thx in advance for looking into the issue.
We are running into following issue when we upgraded APEX 3.2 to APEX 4.02
1) The Tabular form insert does not work.
2) We are fatching the value of the Global variable APEX_APPLICATION.g_XXXX in a procedure and we get null for this value after submit for new row to be inserted.
The tabular form was working fine in APEX 3.2.
The Update and Delete works just fine.
Any help in this regard is highly appreciated.
Thx and regards,
Mahesh

Here is my workaround to get the ADDROW/SUBMIT working again if you have a legacy Tabular Form:
1 PAGE ATTRIBUTES
 JAVASCRIPT
 FUNCTION AND GLOBAL VARIABLE DECLARATION
 var htmldb_delete_message='"DELETE_CONFIRM_MSG"';
2 DELETE BUTTON
 ACTION WHEN BUTTON CLICKED
 URL Target change to
 javascript:apex.confirm(htmldb_delete_message,'MULTI_ROW_DELETE');
3 ADDROW BUTTON
 ACTION WHEN BUTTON CLICKED
 Action
 redirect to URL
 URL Target
 javascript:addRow();
4 PROCESS
 APPLYMRU (activitated by button ADDROW)
 CONDITION
 never or delete
5 PROCESS
 ADDROWS
 CONDITION
 never or delete
6 CHANGE PAGE TEMPLATE to e.g. THEME 13 One Level Tabs.
7 IF YOU WANT ADD FUNCTIONALITY TO GOTO BOTTOM OF PAGE AFTER ADDROW
 1. In the page footer put <a name="bottom_of_page"></a>
 2. Amend the action when the "ADD" button is clicked to scroll down to the new region by doing the following:
 - edit "ADD" button
 - Go to "Action when button Clicked" section
 - Amend "URL Target" from
 javascript:addRow();
 to
 javascript:addRow();window.location='#bottom_of_page' ;
regards
PaulP

Access to Outlook Anywhere does not work

Good evening,
I recently installed an Exchange Server 2013 CAS / MB.
Until now, the server presented a few errors (mainly in the
event log) that does not seem to significantly influence functionality.
This week I published the server on the Internet and verified various malfunctions
related to the access from outside.
In particular from outside:
1 - OWA does not work with Windows integrated authentication, it works with the Forms based authentication;
2 - Outlook Anywhere does not work from internet.
I've done a lot of research and testing without success.
With regard to the first issue (which is not a priority but can relate to second one)
add that in Firefox I get a first authentication request. If
I enter credentials it ask again for identical authentication (repeatly), if I cancel it shows a second one that instead allows me access (are slightly different).
I assume that the first is the integrated Windows application and the second is basic authentication.
Internet Explorer shows me only the first authentication request and if I cancel shows blank page.
The problem is
priority 2:
Outlook connects without problems on LAN network, the Internet
seems to download the correct information
(autodiscover), but then does not connect
to the server (connection to Microsoft Exchange is unavailable).
If you manually edit the settings,
auto-configuration server returns as
a [email protected]. If I change
manually the server (and proxy settings
http), the result does not change.
- Setting information -
The server is installed
in the LAN network and is exposed on the Internet through
a firewall (Pat on port 443, et al. not 80)
on a public address.
The public and private DNS have been configured with a
host record (A) and two
CNAME (webmail and autodiscover).
The internal Outlook clients connect
with autodiscover and HTTPS /
NTLM / SSL (Outlook connectivity
status).
IMAP, SMTP, POP, ActiveSync function.
Exchange remote connectivity analizer retrieves Autodiscover information but doesn't pass test for RPC/HTTP access (it discard accesson
port 443 and try port 80, SPF isn't configured).
The navigation to the url
https://proxyexternalURL/rpc/rpcproxy.dll has the same behaviour like problem 1.
Test-OutlookConnectivity returns unmanaged error ('WARNING: An unexpected error has occurred and a Watson dump is being generated: Failed to find the probe result for invoke now request id -- and probe workdefinition id --').
Errors in eventviewer: 5011 - WAS (one time), 139 - MSExchange OWA (some not ripetitive), 3028 - MSExchangeApplicationLogic (every 6 hours), 106 - MSExchange common (many during working hour), 65535 - application (some at nighttime 00.00 - 03.00 a.m.), 1006
- MSExchangeDiagnostic (every 30 min), 6002 - MSExchange Mid-Tier Storage (about every 5 minutes), 5 - MSExcahnge Workload Management (one time).
Ask for further information.
- Cmdlet and Autodiscover output -
Get-OutlookAnywhere | fl name,*auth*,*ssl*,*host*
Name : Rpc (Default Web site)
ExternalClientAuthenticationMethod : Basic
InternalClientAuthenticationMethod : Ntlm
IISAuthenticationMethods : {Basic, Ntlm, Negotiate}
SSLOffloading : True
ExternalClientsRequireSsl : True
InternalClientsRequireSsl : True
ExternalHostname : webmail.name_domain.test
InternalHostname : webmail.name_domain.test
Get-OutlookProvider | ft -autosize
Name Server CertPrincipalName TTL
EXCH msstd:webmail.name_domain.test 1
EXPR msstd:webmail.name_domain.test 1
WEB
 1
Get-AutodiscoverVirtualDirectory | fl name,*auth*,*url*
Name : Autodiscover (Default Web site)
InternalAuthenticationMethods : {Basic, WSSecu.testy, OAuth}
ExternalAuthenticationMethods : {Basic, WSSecu.testy, OAuth}
LiveIdNegotiateAuthentication : False
WSSecu.testyAuthentication : True
LiveIdBasicAuthentication : False
BasicAuthentication : True
DigestAuthentication : False
WindowsAuthentication : False
OAuthAuthentication : True
AdfsAuthentication : False
InternalUrl :
ExternalUrl :
Get-MapiVirtualDirectory | fl name,*auth*,*url*
Name : mapi (Default Web site)
IISAuthenticationMethods : {Basic, Ntlm, Negotiate}
InternalAuthenticationMethods : {Basic, Ntlm, Negotiate}
ExternalAuthenticationMethods : {Basic, Ntlm, Negotiate}
InternalUrl : https://webmail.name_domain.test/mapi
ExternalUrl : https://webmail.name_domain.test/mapi
Autodiscover.xml
<?xml version="1.0" encoding="utf-8"?>
<Autodiscover xmlns="http://schemas.microsoft.com/exchange/autodiscover/responseschema/2006">
<Response xmlns="http://schemas.microsoft.com/exchange/autodiscover/outlook/responseschema/2006a">
 <User>
 <DisplayName>user</DisplayName>
 <LegacyDN>/o=organization_name/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Recipients/cn=e4c0c18c8f214afbb5152bb08823179d-user</LegacyDN>
 <AutoDiscoverSMTPAddress>user@name_domain.test</AutoDiscoverSMTPAddress>
 <DeploymentId>d60c71c9-3740-404c-a38c-aa24e6105432</DeploymentId>
 </User>
 <Account>
 <AccountType>email</AccountType>
 <Action>settings</Action>
 <MicrosoftOnline>False</MicrosoftOnline>
 <Protocol>
 <Type>EXCH</Type>
 <Server>72036b30-a4d4-4b42-9c39-445bd04c23a6@name_domain.test</Server>
 <ServerDN>/o=organization_name/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Configuration/cn=Servers/cn=72036b30-a4d4-4b42-9c39-445bd04c23a6@name_domain.test</ServerDN>
 <ServerVersion>73C082C8</ServerVersion>
 <MdbDN>/o=organization_name/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Configuration/cn=Servers/cn=72036b30-a4d4-4b42-9c39-445bd04c23a6@name_domain.test/cn=Microsoft Private MDB</MdbDN>
 <PublicFolderServer>webmail.name_domain.test</PublicFolderServer>
 <AD>DC2.name_domain.test</AD>
 <ASUrl>https://webmail.name_domain.test/EWS/Exchange.asmx</ASUrl>
 <EwsUrl>https://webmail.name_domain.test/EWS/Exchange.asmx</EwsUrl>
 <EmwsUrl>https://webmail.name_domain.test/EWS/Exchange.asmx</EmwsUrl>
 <EcpUrl>https://webmail.name_domain.test/ecp/</EcpUrl>
 <EcpUrl-um>?rfr=olk&p=customize/voicemail.aspx&exsvurl=1&realm=name_domain.test</EcpUrl-um>
 <EcpUrl-aggr>?rfr=olk&p=personalsettings/EmailSubscriptions.slab&exsvurl=1&realm=name_domain.test</EcpUrl-aggr>
 <EcpUrl-mt>PersonalSettings/DeliveryReport.aspx?rfr=olk&exsvurl=1&IsOWA=<IsOWA>&MsgID=<MsgID>&Mbx=<Mbx>&realm=name_domain.test</EcpUrl-mt>
 <EcpUrl-ret>?rfr=olk&p=organize/retentionpolicytags.slab&exsvurl=1&realm=name_domain.test</EcpUrl-ret>
 <EcpUrl-sms>?rfr=olk&p=sms/textmessaging.slab&exsvurl=1&realm=name_domain.test</EcpUrl-sms>
 <EcpUrl-publish>customize/calendarpublishing.slab?rfr=olk&exsvurl=1&FldID=<FldID>&realm=name_domain.test</EcpUrl-publish>
 <EcpUrl-photo>PersonalSettings/E.testAccount.aspx?rfr=olk&chgPhoto=1&exsvurl=1&realm=name_domain.test</EcpUrl-photo>
 <EcpUrl-tm>?rfr=olk&ftr=TeamMailbox&exsvurl=1&realm=name_domain.test</EcpUrl-tm>
 <EcpUrl-tmCreating>?rfr=olk&ftr=TeamMailboxCreating&SPUrl=<SPUrl>&.testle=<.testle>&SPTMAppUrl=<SPTMAppUrl>&exsvurl=1&realm=name_domain.test</EcpUrl-tmCreating>
 <EcpUrl-tmE.testing>?rfr=olk&ftr=TeamMailboxE.testing&Id=<Id>&exsvurl=1&realm=name_domain.test</EcpUrl-tmE.testing>
 <EcpUrl-extinstall>Extension/InstalledExtensions.slab?rfr=olk&exsvurl=1&realm=name_domain.test</EcpUrl-extinstall>
 <OOFUrl>https://webmail.name_domain.test/EWS/Exchange.asmx</OOFUrl>
 <UMUrl>https://webmail.name_domain.test/EWS/UM2007Legacy.asmx</UMUrl>
 <OABUrl>https://webmail.name_domain.test/OAB/e66d9a4a-6ed2-4512-b72f-522381524dd9/</OABUrl>
 <ServerExclusiveConnect>off</ServerExclusiveConnect>
 <CertPrincipalName>msstd:webmail.name_domain.test</CertPrincipalName>
 </Protocol>
 <Protocol>
 <Type>EXPR</Type>
 <Server>webmail.name_domain.test</Server>
 <SSL>On</SSL>
 <AuthPackage>Basic</AuthPackage>
 <ASUrl>https://webmail.name_domain.test/ews/exchange.asmx</ASUrl>
 <EwsUrl>https://webmail.name_domain.test/ews/exchange.asmx</EwsUrl>
 <EmwsUrl>https://webmail.name_domain.test/ews/exchange.asmx</EmwsUrl>
 <EcpUrl>https://webmail.name_domain.test/ecp/</EcpUrl>
 <EcpUrl-um>?rfr=olk&p=customize/voicemail.aspx&exsvurl=1&realm=name_domain.test</EcpUrl-um>
 <EcpUrl-aggr>?rfr=olk&p=personalsettings/EmailSubscriptions.slab&exsvurl=1&realm=name_domain.test</EcpUrl-aggr>
 <EcpUrl-mt>PersonalSettings/DeliveryReport.aspx?rfr=olk&exsvurl=1&IsOWA=<IsOWA>&MsgID=<MsgID>&Mbx=<Mbx>&realm=name_domain.test</EcpUrl-mt>
 <EcpUrl-ret>?rfr=olk&p=organize/retentionpolicytags.slab&exsvurl=1&realm=name_domain.test</EcpUrl-ret>
 <EcpUrl-sms>?rfr=olk&p=sms/textmessaging.slab&exsvurl=1&realm=name_domain.test</EcpUrl-sms>
 <EcpUrl-publish>customize/calendarpublishing.slab?rfr=olk&exsvurl=1&FldID=<FldID>&realm=name_domain.test</EcpUrl-publish>
 <EcpUrl-photo>PersonalSettings/E.testAccount.aspx?rfr=olk&chgPhoto=1&exsvurl=1&realm=name_domain.test</EcpUrl-photo>
 <EcpUrl-tm>?rfr=olk&ftr=TeamMailbox&exsvurl=1&realm=name_domain.test</EcpUrl-tm>
 <EcpUrl-tmCreating>?rfr=olk&ftr=TeamMailboxCreating&SPUrl=<SPUrl>&.testle=<.testle>&SPTMAppUrl=<SPTMAppUrl>&exsvurl=1&realm=name_domain.test</EcpUrl-tmCreating>
 <EcpUrl-tmE.testing>?rfr=olk&ftr=TeamMailboxE.testing&Id=<Id>&exsvurl=1&realm=name_domain.test</EcpUrl-tmE.testing>
 <EcpUrl-extinstall>Extension/InstalledExtensions.slab?rfr=olk&exsvurl=1&realm=name_domain.test</EcpUrl-extinstall>
 <OOFUrl>https://webmail.name_domain.test/ews/exchange.asmx</OOFUrl>
 <UMUrl>https://webmail.name_domain.test/ews/UM2007Legacy.asmx</UMUrl>
 <OABUrl>https://webmail.name_domain.test/OAB/e66d9a4a-6ed2-4512-b72f-522381524dd9/</OABUrl>
 <ServerExclusiveConnect>on</ServerExclusiveConnect>
 <CertPrincipalName>msstd:webmail.name_domain.test</CertPrincipalName>
 <EwsPartnerUrl>https://webmail.name_domain.test/ews/exchange.asmx</EwsPartnerUrl>
 <GroupingInformation>LAN</GroupingInformation>
 </Protocol>
 <Protocol>
 <Type>WEB</Type>
 <Internal>
 <OWAUrl AuthenticationMethod="Basic, Fba">https://webmail.name_domain.test/</OWAUrl>
 <Protocol>
 <Type>EXCH</Type>
 <ASUrl>https://webmail.name_domain.test/EWS/Exchange.asmx</ASUrl>
 </Protocol>
 </Internal>
 <External>
 <OWAUrl AuthenticationMethod="Basic">https://webmail.name_domain.test/</OWAUrl>
 <Protocol>
 <Type>EXPR</Type>
 <ASUrl>https://webmail.name_domain.test/ews/exchange.asmx</ASUrl>
 </Protocol>
 </External>
 </Protocol>
 <Protocol>
 <Type>EXHTTP</Type>
 <Server>webmail.name_domain.test</Server>
 <SSL>On</SSL>
 <AuthPackage>Ntlm</AuthPackage>
 <ASUrl>https://webmail.name_domain.test/EWS/Exchange.asmx</ASUrl>
 <EwsUrl>https://webmail.name_domain.test/EWS/Exchange.asmx</EwsUrl>
 <EmwsUrl>https://webmail.name_domain.test/EWS/Exchange.asmx</EmwsUrl>
 <EcpUrl>https://webmail.name_domain.test/ecp/</EcpUrl>
 <EcpUrl-um>?rfr=olk&p=customize/voicemail.aspx&exsvurl=1&realm=name_domain.test</EcpUrl-um>
 <EcpUrl-aggr>?rfr=olk&p=personalsettings/EmailSubscriptions.slab&exsvurl=1&realm=name_domain.test</EcpUrl-aggr>
 <EcpUrl-mt>PersonalSettings/DeliveryReport.aspx?rfr=olk&exsvurl=1&IsOWA=<IsOWA>&MsgID=<MsgID>&Mbx=<Mbx>&realm=name_domain.test</EcpUrl-mt>
 <EcpUrl-ret>?rfr=olk&p=organize/retentionpolicytags.slab&exsvurl=1&realm=name_domain.test</EcpUrl-ret>
 <EcpUrl-sms>?rfr=olk&p=sms/textmessaging.slab&exsvurl=1&realm=name_domain.test</EcpUrl-sms>
 <EcpUrl-publish>customize/calendarpublishing.slab?rfr=olk&exsvurl=1&FldID=<FldID>&realm=name_domain.test</EcpUrl-publish>
 <EcpUrl-photo>PersonalSettings/E.testAccount.aspx?rfr=olk&chgPhoto=1&exsvurl=1&realm=name_domain.test</EcpUrl-photo>
 <EcpUrl-tm>?rfr=olk&ftr=TeamMailbox&exsvurl=1&realm=name_domain.test</EcpUrl-tm>
 <EcpUrl-tmCreating>?rfr=olk&ftr=TeamMailboxCreating&SPUrl=<SPUrl>&.testle=<.testle>&SPTMAppUrl=<SPTMAppUrl>&exsvurl=1&realm=name_domain.test</EcpUrl-tmCreating>
 <EcpUrl-tmE.testing>?rfr=olk&ftr=TeamMailboxE.testing&Id=<Id>&exsvurl=1&realm=name_domain.test</EcpUrl-tmE.testing>
 <EcpUrl-extinstall>Extension/InstalledExtensions.slab?rfr=olk&exsvurl=1&realm=name_domain.test</EcpUrl-extinstall>
 <OOFUrl>https://webmail.name_domain.test/EWS/Exchange.asmx</OOFUrl>
 <UMUrl>https://webmail.name_domain.test/EWS/UM2007Legacy.asmx</UMUrl>
 <OABUrl>https://webmail.name_domain.test/OAB/e66d9a4a-6ed2-4512-b72f-522381524dd9/</OABUrl>
 <ServerExclusiveConnect>On</ServerExclusiveConnect>
 <CertPrincipalName>msstd:webmail.name_domain.test</CertPrincipalName>
 </Protocol>
 <Protocol>
 <Type>EXHTTP</Type>
 <Server>webmail.name_domain.test</Server>
 <SSL>On</SSL>
 <AuthPackage>Basic</AuthPackage>
 <ASUrl>https://webmail.name_domain.test/ews/exchange.asmx</ASUrl>
 <EwsUrl>https://webmail.name_domain.test/ews/exchange.asmx</EwsUrl>
 <EmwsUrl>https://webmail.name_domain.test/ews/exchange.asmx</EmwsUrl>
 <EcpUrl>https://webmail.name_domain.test/ecp/</EcpUrl>
 <EcpUrl-um>?rfr=olk&p=customize/voicemail.aspx&exsvurl=1&realm=name_domain.test</EcpUrl-um>
 <EcpUrl-aggr>?rfr=olk&p=personalsettings/EmailSubscriptions.slab&exsvurl=1&realm=name_domain.test</EcpUrl-aggr>
 <EcpUrl-mt>PersonalSettings/DeliveryReport.aspx?rfr=olk&exsvurl=1&IsOWA=<IsOWA>&MsgID=<MsgID>&Mbx=<Mbx>&realm=name_domain.test</EcpUrl-mt>
 <EcpUrl-ret>?rfr=olk&p=organize/retentionpolicytags.slab&exsvurl=1&realm=name_domain.test</EcpUrl-ret>
 <EcpUrl-sms>?rfr=olk&p=sms/textmessaging.slab&exsvurl=1&realm=name_domain.test</EcpUrl-sms>
 <EcpUrl-publish>customize/calendarpublishing.slab?rfr=olk&exsvurl=1&FldID=<FldID>&realm=name_domain.test</EcpUrl-publish>
 <EcpUrl-photo>PersonalSettings/E.testAccount.aspx?rfr=olk&chgPhoto=1&exsvurl=1&realm=name_domain.test</EcpUrl-photo>
 <EcpUrl-tm>?rfr=olk&ftr=TeamMailbox&exsvurl=1&realm=name_domain.test</EcpUrl-tm>
 <EcpUrl-tmCreating>?rfr=olk&ftr=TeamMailboxCreating&SPUrl=<SPUrl>&.testle=<.testle>&SPTMAppUrl=<SPTMAppUrl>&exsvurl=1&realm=name_domain.test</EcpUrl-tmCreating>
 <EcpUrl-tmE.testing>?rfr=olk&ftr=TeamMailboxE.testing&Id=<Id>&exsvurl=1&realm=name_domain.test</EcpUrl-tmE.testing>
 <EcpUrl-extinstall>Extension/InstalledExtensions.slab?rfr=olk&exsvurl=1&realm=name_domain.test</EcpUrl-extinstall>
 <OOFUrl>https://webmail.name_domain.test/ews/exchange.asmx</OOFUrl>
 <UMUrl>https://webmail.name_domain.test/ews/UM2007Legacy.asmx</UMUrl>
 <OABUrl>https://webmail.name_domain.test/OAB/e66d9a4a-6ed2-4512-b72f-522381524dd9/</OABUrl>
 <ServerExclusiveConnect>On</ServerExclusiveConnect>
 <CertPrincipalName>msstd:webmail.name_domain.test</CertPrincipalName>
 </Protocol>
 </Account>
</Response>
</Autodiscover>
Get-OwaVirtualDirectory | fl name,*auth*,*url*
Name : owa (Default Web Site)
ClientAuthCleanupLevel : High
InternalAuthenticationMethods : {Basic, Fba}
BasicAuthentication : True
WindowsAuthentication : False
DigestAuthentication : False
FormsAuthentication : True
LiveIdAuthentication : False
AdfsAuthentication : False
OAuthAuthentication : False
ExternalAuthenticationMethods : {Basic}
Url : {}
SetPhotoURL :
Exchange2003Url :
FailbackUrl :
InternalUrl : https://webmail.name_domain.test/
ExternalUrl : https://webmail.name_domain.test/

Follow the results of the test
Outlook Anywhere (RPC over HTTP).
Has been used an account for which
outlook anywhere works. The account
for which the outlook anywhere does not work is
an administrative account and therefore
can not be used in the test.
Autodiscovery returns the
same result for both mailbox.
I'm testing RPC/HTTP connectivity.
Testing RPC over HTTP has not been exceeded.
Test steps
Microsoft connectivity Analyzer is attempting to test the Autodiscover service for user_test@domain_name.test.
Test the Autodiscover service has not been exceeded.
Test steps
I'm trying to contact the Autodiscover service with each method available.
I was not able to contact the Autodiscover service with no method.
Test steps
I'm trying to test the possible URL for the Autodiscover service https://domain_name.test/AutoDiscover/AutoDiscover.xml
The test of this potential URL for the Autodiscover service has not been exceeded.
Test steps
I'm trying to resolve the host name domain_name. DNS test.
I was able to resolve the host name.
IP addresses are returned: xxx.yyy.zzz.www
I'm testing the TCP port 443 on the host domain_name. tests to check that is open and listening.
The door has been opened properly.
I'm testing the validity of your SSL certificate.
The SSL certificate has not exceeded one or more validation controls.
Test steps
Microsoft connectivity Analyzer is attempting to obtain the SSL certificate from the remote server domain_name. test on port 443.
Microsoft connectivity Analyzer got the remote SSL certificate.
Remote certificate subject: E = it_staff@domain_name.test, CN = * domain_name. test, OU = it staff, O = domain_name, L = city, S = state, C = test issuer: E = it_staff@domain_name.test, CN = * domain_name. test, OU = it staff, O = domain_name,
L = city, S = state, C = test.
I am validating the certificate name.
I could not validate the certificate name.
More info about this issue and how to resove it
The host name domain_name. testing does not match any name found on the certificate and server = it_staff@domain_name.test, CN = * domain_name. test, OU = it staff, O = domain_name, L = city, S = state, C = test.
I'm trying to test the possible URL for the Autodiscover service https://autodiscover.domain_name.test/AutoDiscover/AutoDiscover.xml
The test of this potential URL for the Autodiscover service has not been exceeded.
Test steps
I'm trying to resolve the host name autodiscover. domain_name. DNS test.
I was able to resolve the host name.
IP addresses are returned: xxx.yyy.zzz.kkk
I'm testing the TCP port 443 on the host autodiscover. domain_name. tests to check that is open and listening.
The door has been opened properly.
I'm testing the validity of your SSL certificate.
The SSL certificate has not exceeded one or more validation controls.
Test steps
Microsoft connectivity Analyzer is attempting to obtain the SSL certificate from the remote server autodiscover. domain_name. test on port 443.
Microsoft connectivity Analyzer got the remote SSL certificate.
Other details
Remote certificate subject: CN = webmail. domain_name. test, OU = it staff, O = domain_name, L = city, S = city, C = test issuer: CN = domain_name-DC1-CA, DC = domain_name, DC = test.
I am validating the certificate name.
I validated the certificate name.
Other details
I found the host name autodiscover. domain_name. test in the voice of the alternative name of the certificate object.
Elapsed time: 1 ms.
I am validating the reliability of certificates.
I was not able to validate the reliability of the certificate.
Test steps
Microsoft connectivity Analyzer is attempting to generate certificate chains to a certificate CN = webmail. domain_name. test, OU = it staff, O = domain_name, L = city, S = city, C = test.
I failed to build a certificate chain for the certificate.
Other details
Failed to generate the certificate chain.
May be missing the required intermediate certificates.
I'm trying to contact the Autodiscover service using the HTTP redirect method.
I was not able to contact the Autodiscover service using the HTTP redirect method.
Test steps
I'm trying to resolve the host name autodiscover. domain_name. DNS test.
I was able to resolve the host name.
IP addresses are returned: xxx.yyy.zzz.kkk
I'm testing the TCP port 80 on the host autodiscover. domain_name. tests to check that is open and listening.
The specified port is blocked, is not listening or doesn't produce the expected response.
More info about this issue and how to resove it
I encountered a network error while communicating with the remote host.
I'm trying to
find the
SRV DNS record _audiscover._tcp.domain_name.test.
I failed to find
the SRV record of the
Autodiscover service
in DNS.
Some clarifications:
1 - xxx.yyy.zzz.www and xxx.yyy.zzz.kkk
are two static public addresses
of which only the latter exposes Exchange services;
2 - The certificate
*. Domain_name.test is not related
to Exchange services;
3 -I imported the certificate
of the issuing CA on the standalone test PC to validate the certificate.
3- The port 80 is not open and are not published SRV records.
Best regards.

Dynamic image does not work in the template builder plug-in (Apex-BI Intgr)

Hi all, I posted this problem in the BI Publisher topic but nobody responded maybe this is because mods thought this is an Apex-BI integration issue.
If I'm in the wrong place, please do warn me.
The documentation says:
Direct Insertion
Insert the jpg, gif, or png image directly in your template.
...This works obviously
URL Reference
1. Insert a dummy image in your template.
2. In Microsoft Word's Format Picture dialog box select the Web tab. Enter the following syntax in the Alternative text region to reference the image URL:
url:{'http://image location'}
For example, enter: url:{'http://www.oracle.com/images/ora_log.gif'}
...This works too when I hardcode an url as url:{'http://www.google.com.tr/images/firefox/mobiledownload.png'}
Element Reference from XML File
1. Insert a dummy image in your template.
2. In Microsoft Word's Format Picture dialog box select the Web tab. Enter the following syntax in the Alternative text region to reference the image URL:
url:{IMAGE_LOCATION}
where IMAGE_LOCATION is an element from your XML file that holds the full URL to the image.
...This, however, does not work.
I use Apex' report query tool and My query is like
select 'http://www.google.com.tr/images/firefox/mobiledownload.png' IMAGE_LOCATION from ... (a single result set for my template)
the xml data is generated with an IMAGE_LOCATION tag. I load it to word template plug-in. The Url successfully displays in the report if I make it a plain-simple field.
But when it's in the image format->web->alt text as url:{IMAGE_LOCATION} no image displayed.
I need to keep this design procedure simple so a simple word user could design a report via using just template builder plug-in. I don't wish to explore the xsl-fo area...yet.
Could you tell me why I can't get this url:{IMAGE_LOCATION} to work?
Regards
PS: My BI version: 10.1.3.4.1

Hi Oeren,
your steps seem basically to be correct. I have a tutorial how to do this here (in german)
http://www.oracle.com/webfolder/technetwork/de/community/apex/tipps/pdf-dyn-images/index.html
when you see the URL corrently as long as you have it as a plain text field, the XML tag and the
referencing seem to be OK.
Here are two thought - the issue might be one of these ...
How did you insert the dummy image into the word document - did you do it via "insert" or
via "link to file". "Link to File" does not work - you must choose the simple "insert".
Another one: Does your BI Server have a connection to the internet - is the proxy server correctly set ..?
Does this help ..?
Regards
-Carsten
Cloud Computing mit APEX umsetzen. Jetzt!
http://tinyurl.com/apexcloudde
SQL und PL/SQL: Tipps, Tricks & Best Practice
http://sql-plsql-de.blogspot.com

Linking to a website does not work

I am new to captivate and am having a problem. On one of my slides, I have a link to a website. I placed a click box over the text and set the action to Open URL or file and specified the URL to open in a new window.
When I publish the project, the link works when I am in the published PDF file but it does not work when I am in the published SWF or HTM file. Can someone give me some advice on what I may be doing wrong? IF this has been addresssed elsewhere, I am sorry for the duplication. I have searched and could not find anything.
Thanks in advance.

Hi there
"Whitelisting" is a process that is used to identify something as being a "safe" or "trusted" source. I believe what is meant in this context is that you need to add the location to the trusted locations list in the Flash Player as described in the link below:
Click here to view
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Cwa url-redirect does not work

Similar Messages

Maybe you are looking for