CWA with guest controller?

Existing environment has a dedicated guest controller. Principal would like to retain the guest controller in the DMZ and open ports for CWA to ISE inside the firewall. The question is on configuration of the wireless LAN. Should the foreign controller be configured for MAC auth? Obviously the anchor would need to be but not sure about the foreign.

When you have anchor/foreign, the web auth traffic always go to the anchor, so  with CWA, the traffic from the anchor to the ISE will need to be permitted . go through the following link this may of help
https://supportforums.cisco.com/docs/DOC-26442

Similar Messages

  • Cannot Open the URL of CWA with ISE

    Hi Folks,
    I have a problem when doing the CWA with ISE so that I can Provide the access of the network for the guests.
    Everything goes fine except the URL of the CWA: When the guests open the explorer and enter a domain after connecting the SSID, they will be redirected to the URL like "https://hostname.demo.com:8443/guestportal/..................." which starts with the hostname of the ISE and the domain-name of the ISE, but for us, we don't have any AD and LAN DNS for our network so that we cannot translate the hostname.demo.com into the IP of the ISE, so can I just change the URL into IP type like "https://10.10.10.70:8443/guestportal"?

    Screenshot of a screenshot (sorry) attached.
    Basically it's in authorization policy, allows you to use a static DNS or IP address

  • Guest Controller License requirement ???

    Hi All ,
    Question regarding the Guest controller ( Ancher controller). ... What license will be required to guest controller ???
    Assume i have a LAN controller with a license of 100 AP , and now i am going to plan for guest user  WiFi access as well but with separt Controller.
    Will i need guest controller with 100 AP license ???
    Your quick response will be helpful for me and if possible please share the URL for reference. Thanks.

    There is no need for any license for anchoring Guest in you network. You can configure you current WLC for the same.
    Below is the link for configuration guide.
    http://www.cisco.com/en/US/docs/wireless/technology/guest_access/technical/reference/4.1/GAccess_41.html

  • Cannot access to any site with ssl connection and fail to open safari and keychain, unless restart computer and login in with Guest account.

    when Update to 10.7.2 ,I cannot access to any site with ssl connection and fail to open safari and keychain, unless restart computer and login in with Guest account.
    OS:10.7.2
    Macbook Pro 2010-mid 13inch

    I also have the same problem, however if I use Firefox or Opera sites with ssl connection work fine. Still, I can't use Google Chrome (ssl), Safari (ssl), the Mac app store (generally), or the iTunes store (generally). Both the iTunes store, Safari and the app store won't respond, and Chrome displays this error: (net::ERR_TIMED_OUT). The problem persists regardless of what network I'm using. Also, when trying to access the keychain or iCloud, the process will not start (will hang). I didn't have these problems at all before updating to 10.7.2.
    Sometimes rebooting helps, and sometimes not. If the problem disappears by rebooting, then it only lasts a few minutes before it reappears. It is very frustrating, especially since there doesn't seem to be any obvious or consistent way of which to fix it.
    I'm also using a Macbook Pro 13-inch mid 2010.

  • Windows Server 2008 R2: Server unable to authenticate with Domain Controller

    Hello, I was wondering what could be the reason for this error if it is certain that there was no other computer on the network using the same name:
    This computer could not authenticate with<Domain-controller>, a Windows domain controller for domain <Domain-name>, and therefore this computer might deny logon requests. This
    inability to authenticate might be caused by another computer on the same network using the same name or the password for this computer account is not recognized. 
    What would cause the machine account pw to be 'not recognized'?

    You can track changes in AD by enabling AD Auditing: https://technet.microsoft.com/en-us/library/cc731764%28v=ws.10%29.aspx?f=255&MSPPError=-2147217396
    As reading the logs is usually a complicated and time consuming task, it is recommended to use a third party tool for auditing. The one I usually recommend is Lepide Auditor - Active Directory: http://www.lepide.com/lepideauditor/active-directory.html
    This posting is provided AS IS with no warranties or guarantees , and confers no rights.
    Ahmed MALEK
    My Website Link
    My Linkedin Profile
    My MVP Profile

  • How do I create a track with just controller MIDI data in it?

    How can I create a track with just MIDI controller data in it? 
    For example: I'd like to create a track that issues a bank change/patch change and sets the default volume for that track, and that's it.
    I can then use this setup as a template for future projects.
    How can I do this?
    It seems like LPX will not allow me to enter any controller data into a track without first defining a region. However, it seems that LPX also won't allow me to create a region with just controller data in it. 
    Ideas?
    Thanks
    -Mike

    Soniq2 wrote:
    How can I create a track with just MIDI controller data in it? 
    For example: I'd like to create a track that issues a bank change/patch change and sets the default volume for that track, and that's it.
    I can then use this setup as a template for future projects.
    How can I do this?
    Let me qualify, I'm using Logic 9, not upgrading for various reasons.
    Is this for an external Instrument? If so it's very easy to do using the inspector, but first you have to create an instrument in the environment. (at least in L9 and the way I do it, which is old school)  Here's an example of an external instrument setup in the Environment.
    A multi Instrument is created, channels 1, 2, 3, & 9 are active. Patch names are entered, format for bank change is selected. (just happens I selected channel 14 to open the patch names).  This Instrument will now appear in the arrange page, and you can set patch change, bank change, volume & pan.

  • I purchased the Logitech F310 game controller for my 2011 MacBook Pro. How do I get the driver installed for it. The Disk that came with the controller is a mini disk and will not insert into my laptop.

    I purchased the Logitech F310 game controller for my 2011 MacBook Pro. How do I get the driver installed for it. The Disk that came with the controller is a mini disk and will not insert into my laptop.

    May not make a difference anyway. The Logitech support site does not show drivers for Mac OS for the F310:
    http://www.logitech.com/en-us/support/gamepad-f310?crid=411
    I'd contact their support to find out if there is a Mac driver available, and if they can either give you a web link to get it, e-mail you the software, or snail-mail you a standard-size disk with the drivers.

  • Purchase requisition with MRP controller

    Hi everybody, I need support because I have to control during purchase requisition to block users with specific MRP controller.
    I mean, user A only have permission to create purchase requisition with MRP controller Z and user B only have permission to create purchase requisition with MRP controller Y.
    Thanks for all the ASAP cooperation.
    Regards.

    Hi Mitra,
    You will find your answer here.
    MRP controller for PR document type
    Do let me know if it helped, as I might have to explore this option for an upcoming requirement.
    Thanks
    Shailesh

  • CWA with WLC Firmware 7.0.228 and ISE 1.1.1

    Hi,
    Does Cisco ISE central web authentication supports on WLC version 7.0.228 ?
    My customer has many access points which are support only for firmware code 7.0.228.
    Cisco ISE version 1.1.1
    WLC 5500 Series but the existing access point is cannot support to 7.3
    Thanks,
    Pongsatorn Maneesud

    Tarik is correct, you need 7.2.x and later to use CWA with ISE. Here is a general summary of features supported on ISE on 7.0 and 7.2 versions of code:
    Scenarios                                                          WLC 7.0                                             7.2 
    802.1X Auth                                                     Yes                                                      Yes
    802.1X + Posture                                            Yes                                                      Yes
    802.1X + Profiling                                           Yes                                                      Yes
    Web Auth + Posture                                       No *                                                   Yes
    Web Auth + Profiling                                      Inventory only *                         Yes
    Central Web Auth(CWA)                               No *                                                   Yes
    Local Web Auth(LWA)                                   Yes                                                      Yes

  • 802.1X with Guest vlan support IOS version ???

    I don't know, Whitch IOS version support 802.1X with Guest vlan to Catalyst 2950 and 3550 switch
    please reply to my question.

    Tkank for your help.
    Also, Cisco web is explained , except for Catalyst 2950 Standard Image (SI) in IOS 12.1(22)EA3
    but I can't understand, My site is using catalyst 2950 SI to 802.1X and guest vlan in IOS image 12.1(22)EA3
    ex) TW_14F_A_C2950_32.8#sh ver
    Cisco Internetwork Operating System Software
    IOS (tm) C2950 Software (C2950-I6Q4L2-M), Version 12.1(22)EA3, RELEASE SOFTWARE (fc1)
    Running Standard Image
    24 FastEthernet/IEEE 802.3 interface(s)
    Model number: WS-C2950-24
    please, reply for my question

  • WLC2112 with Guest / Web-Auth and vlan

    Hi
    I'm trying to configure my WLC with guest SSID and vlan 10.
    The security is only set to Web-auth, and it is all working if the guest network is set to nativ vlan (1) But it seems that the http(s)://1.1.1.1/login.html is not reacheble from the guest SSID/VLAN??
    Please help.
    Management IP Address 192.168.14.252
    Software Version 6.0.182.0
    Emergency Image Version
    I have tried with ver. 5.2 also -

    I think that 1.1.1.1 is only reachable from a wireless client during webauth. They should not be able to reach that address once they have passed through the web auth page.
    Don't know if that helps, or not.

  • Script for synchronizing the clock with Domain Controller

    Hi Everyone,
    In our environment, we have Mac machines which are joined to window's domain. Once in while machine will not log on to domain because the OS clock had a different time than the domain controller and sooner you fix the clock, machine will start communicating with domain controller.
    I was wondering if there is an easier way to do this using script which can run every few hours to force the OS clock to synchronize with the domain controller.
    Thanks,

    You don't need an Applescript to do that.
    Enable the NTP server on the Windows Domain Controller (perhaps start here: http://technet.microsoft.com/en-us/library/cc773013.aspx).
    Then setup the Macs to use NTP (Network Time) to sync to the domain controller.

  • Using older servos with new controller

    My group has a three-axis stage controlled by an old Galil DMC-230
    motion control board, Galil ESA-10-75 amplifilers and three dc servo
    motors (from Galil too, I think).  The board is mounted in an
    ancient computer running DOS.  To make matters worse, the hard
    drive seems about to give out.  We would like to leave the stage
    and motors alone but replace the controller and amplifiers.  We
    are considering using an NI PCI-7344 controller with an NI MID-7604
    Motor Drive.
    My questions are:
    What are the main things to consider when matching a servo motor to a controller?
    Has anyone done anything similar (using older servos, but replacing controller and drive)?
    Should I just give up and beg the boss to buy new motors as well?
    Thanks for any advice!
    Telemaque

    Been there and almost done that. We have a legacy DOS Galil based (DMC-630 controllers with SSA-12/40 drives) system with brushed servos that is on it's last legs.
    Matching servo to drive amps- look at max currents, voltages, and inductances on the motors to see if drive can accomodate. Are they brushed or brushless motors. Also check if encoders and hall signals from existing motors and limits from stages compatible with new controller.
    Personally, I would suggest new motors since you may not know their history of (ab)use and depending on their ratings, may be a minor percentage of total retrofit cost. You may also want to have the stages sent out for refurbishment if time permits. They have probably seen a lot of use with little or no cleaning and lubrication. Mechanical wear also takes it's toll. On the system I mentioned above, we were experiencing loss of accuracy and repeatability- the lead screws and nuts were trashed.
    Just a couple ideas to start with.
    Good Luck
    AK2DM
    ~~~~~~~~~~~~~~~~~~~~~~~~~~
    "It’s the questions that drive us.”
    ~~~~~~~~~~~~~~~~~~~~~~~~~~

  • Key board hangs up randomly with 8155B controller while running the application.

    Key board hangs up randomly with 8155B controller while running the application.

    Roopal,
    This question has too much parameters. In order to help you out, I need to know more information. For example:
    1) Is this a new issue? Has your keyboard worked fine before?
    2) Is you keyboard hanging up when you run a specific application? Does it hang up at boot up?
    3) What operating system are you running?
    Regards,
    Claudia Lorente
    Applications Engineer
    National Instruments
    http://www.ni.com/ask

  • Reusable Component: Fragment with onw controller

    Hi,
    I have written a JS-fragment, which shows a table of files. You can upload/download files from this view.
    All functions are coded within this one Files.fragment.js file.
    I wonder what the best way would be, to have ONE single, own controller for this fragment.
    I dont want to add all function within the "parent" controller.
    The fragment is used on several views within the app.
    Is there any best practise to build more complex, reusable component in UI5?
    Jens

    Hi Jens,
    To my knowledge, Fragments can't have a dedicated controller assigned -- it uses the controller of the calling view:
    Fragments are pieces of UI, just like SAPUI5 MVC views, but without the view control around the content and without their own controller.
    SAPUI5 SDK - Demo Kit
    However, according to the API, you could indeed specify a specific controller so I'm not sure if it would be possible to use a dedicated controller for a Fragment... I have never tried this with Fragments.
    Before Fragments, if I had a complex view, I would have one 'container' or 'parent' view with its controller, and the different inner parts of this container/parent view consisted of other views (which uses the container controller). And only the inner views that were reusable would have their own controller.
    In other words, if it is possible to have a dedicated controller for your reusable Fragment, then that's indeed the way to go IMO

Maybe you are looking for