CWB: how to add more summary data in the summary section

HI All,
We need to add more summary data in the summary section. Some summary data need to calculated dynamically like (summary data A /summary data B).
under the worksheet, there is a link:
Personalize Dynamic Columns
But this link allows to create Dynamic Columns for the worksheet, but not for summary setion.
Is any way to add more summary data in the summary section through personalization instead of customization (VO extension)?
Thanks in advanced!
Jane

faiz2000 wrote:
> How to add more one record in the same time?
>
> Please I need your help to add more one record in the
same time, how can I do
> that?
>
> I have only one text field and the value it is linked
from other table, if
> user he bushes bottoms the all data it will copy it to
new record:
>
> Ex.: <input name="textfield" type="text"
>
value="<%=(Recordset1.Fields.Item("webgroup").Value)%>">
>
>
Use "Repeat Region"
Mick

Similar Messages

  • COPA structure cross 50  char-How to add more char fields in the sturcture

    Hi SAP CO Guru's,
    I am facing one problem in COPA characteristics, I have created the characteristics however in the KEA0 structure where we have already exhaused max limit of 50 char, hence system is not allowing to add these new fields in the structure.
    I need help for getting addition 2 fields into structure.
    I have one more option where few Char fields are not usable, can be remove from the structure if we can not increase the limit of 50 Char in the structure but system is not allowing me th remove the already selected Char fields.
    Thanks in Advance.
    Uday Suryawanshi
    SAP FICO consultant, Pune

    Hi Uday
    There is a way you can increase the limit.. refer the note given above
    However, SAP wont take the responsibility of any thing that happens later on.. It is completely your headache....
    So, better rename the Chars and use them....
    If you are still in DEV Client, delete COPA docs posted till now.. refer Note 21207... This helps you to delete a char if posted data exists
    I personally would prefer to rename and reuse.. After all, recycling is encouraged these days
    Br, Ajay M

  • How to add YYMMDD format date to the file name

    Hi,
    I need genrate the file with date suffixed to its name in YYMMDD format. The add time stamp is adding it till YYYMMDD-HHMMSSS.
    How can I change this format to the required one? Any suggessions.
    Thanks.
    Sri

    hi,
    you can create the whole filename (whatever you need)
    in the mapping (in a UDF) using adapter specific message attributes
    there are many blogs describing how to do that Dynamic Configuration of Some Communication Channel Parameters using Message Mapping
    Regards,
    Michal Krawczyk

  • How to add more summary data in the MIP of Compensation workbench

    Hi all,
    In the MIP (incentive plan) of the compensation workbench, we need to add more summary data in the summary section. I checked that all the summary data in that section are stored in the table 'ben_cwb_summary'.
    Even we can change the VIEW object for that page (using extension), we can't retrieve it because the new summary data/information we need to add are not stored in the table 'ben_cwb_summary'. We need to write our query to summerize data.
    How to implement it?
    Thanks in advanced!
    Jane

    faiz2000 wrote:
    > How to add more one record in the same time?
    >
    > Please I need your help to add more one record in the
    same time, how can I do
    > that?
    >
    > I have only one text field and the value it is linked
    from other table, if
    > user he bushes bottoms the all data it will copy it to
    new record:
    >
    > Ex.: <input name="textfield" type="text"
    >
    value="<%=(Recordset1.Fields.Item("webgroup").Value)%>">
    >
    >
    Use "Repeat Region"
    Mick

  • How to add more Im's in c2-00

    I have a nokia c2-00 mobile phone and wants to use its chat app which is in messaging menu .
    But there is only 1 im (ovi.com) is available i want to add more im's like fb yahoo etc .

    faiz2000 wrote:
    > How to add more one record in the same time?
    >
    > Please I need your help to add more one record in the
    same time, how can I do
    > that?
    >
    > I have only one text field and the value it is linked
    from other table, if
    > user he bushes bottoms the all data it will copy it to
    new record:
    >
    > Ex.: <input name="textfield" type="text"
    >
    value="<%=(Recordset1.Fields.Item("webgroup").Value)%>">
    >
    >
    Use "Repeat Region"
    Mick

  • How to add more drop zones or movies in an idvd menu

    I was building a dvd in idvd and ran out of drop zones to fill but I couldn't figure out how to add more drop zones.
    I tried different templates but I could find none that had more than 12 drop zones.
    Then I was adding movies to the main menu and idvd refused to allow more movies added when I reached 10 movies. It said that the template did not accept more movies.
    I tried a few other templates and could not get it to accept more.
    I don't want to add submenus because the movies being used do not lend themselves to being put into different submenus.
    Is there some way to add more than the default drop zones in an idvd template and to add more movies in a menu without having to use submenus?
    Thanks for any advice.

    I couldn't figure out how to add more drop zones
    Sorry, the templates 'are what they are'.
    I don't want to add submenus because the movies being used do not lend themselves to being put into different submenus.
    You need to figure out how to work with what is available.
    If you want more freedom, buy Apple's Final Cut Studio and learn to use DVD Studio Pro.

  • I want to add image in column is it possible then how to add image in data base what data type we need to do

    I want to add image in column is it possible then how to add image in data base  what data type we need to give we required any casting  please show me one example
    jitendra

    Hi again,
    Several points that can help more:
    1. If you are working with Dot.Net, then I highly recommend read the first link that you got! This is nice and simple coding. Another option is this link which is even better in my opinion:
    http://www.dotnetgallery.com/kb/resource21-How-to-store-and-retrieve-images-from-SQL-server-database-using-aspnet.aspx
    2. As i mention above both link use the column's type image. There are several other option of working with Files. In most of my applications architecture I find that it is better to use a column which let us use any type of file and not an image column.
    In choosing the right column's type for your needs basically your fist question should be if if you want to store your data inside relational database environment or outside relational environment. It is a good idea to look for blogs on this issue. Next
    if you chose to store your data inside then you need to chose the right column type according to your server version. I highly recommend to look for blogs on the differences between those column's types: IMAGE, 
    Check those links:
    To BLOB or Not To BLOB: Large Object Storage in a Database or a Filesystem
    http://research.microsoft.com/apps/pubs/default.aspx?id=64525
    FILESTREAM feature of SQL Server 2008
    http://msdn.microsoft.com/library/hh461480
    FileTables feature of SQL Server 2012
    http://technet.microsoft.com/en-us/library/ff929144.aspx
    Compare Options for Storing Blobs (SQL Server)
    http://technet.microsoft.com/en-us/library/hh403405.aspx
    Binary Large Object (Blob) Data (SQL Server)
    http://technet.microsoft.com/en-us/library/bb895234.aspx
    Managing BLOBs using SQL Server FileStream via EF and WCF streaming
    * Very nice tutorial!
    http://petermeinl.wordpress.com/2012/02/20/managing-blobs-using-sql-server-filestream-via-ef-and-wcf-streaming/
    [Personal Site] [Blog] [Facebook]

  • How to add more disk space into /   root file system

    Hi All,
    Linux  2.6.18-128
    can anyone please let us know how to add more disk space into "/" root file system.
    i have added new hard disk with space of 20GB, 
    [root@rac2 shm]# df -h
    Filesystem            Size  Used Avail Use% Mounted on
    /dev/hda1             965M  767M  149M  84% /
    /dev/hda7             1.9G  234M  1.6G  13% /var
    /dev/hda6             2.9G   69M  2.7G   3% /tmp
    /dev/hda3             7.6G  4.2G  3.0G  59% /usr
    /dev/hda2              18G   12G  4.8G  71% /u01
    LABLE=/               2.0G     0  2.0G   0% /dev/shm
    /dev/hdb2             8.9G  149M  8.3G   2% /vm
    [root@rac2 shm]#

    Dude! wrote:
    I would actually question whether or not more disks increase the risk of a disk failure. One disk can break as likely as one of two of more disks.
    Simple stats.  Buying 2 lottery tickets instead of one, gives you 2 chances to win the lottery prize. Not 1. Even though the odds of winning per ticket remains unchanged.
    2 disks buy you 2 tickets in The-Drive-Failure lottery.
    Back in the 90's, BT (British Telecom) had a 80+ node OPS cluster build with Pyramid MPP hardware. They had a dedicated store of scsi disks for replacing failed disks - as there were disk failure fairly often due to the number of disks. (a Pryamid MPP chassis looked like a Xmas tree with all the scsi drive LEDs, and BT had several)
    In my experience - one should rather expect a drive failure sooner, than later. And have some kind of contingency plan in place to recover from the failure.
    The use of symbolic links instead of striping the filesystem protects from the complete loss of the enchilada if a volume member fails, but it does not reduce the risk of loosing data.
    I would rather buy a single ticket for the drive failure lottery for a root drive, than 2 tickets in this case. And using symbolic links to "offload" non-critical files to the 2nd drive means that its lottery ticket prize is not a non-bootable server due to a toasted root drive.

  • In Share point 2013 how to add more than 2 group by in list

    In Share point 2013 how to add more than 2  group by in list .

    Hi,
    According to your post, my understanding is that you wanted to group by on more than 2 columns in a List View in SharePoint 2013.
    There is no out of the box way to achieve your scenario directly.
    As a workaround, we can use the following method to achieve it.
    First, we can insert Data View Web Parts in SharePoint Designer 2013.
    It’s because the SharePoint Designer 2013 can’t support Design view, then the Data View Web Parts XSL cannot be visually manipulated.
    You can refer to the following article to insert a Data View Web Part.
    http://www.synergyonline.com/Blog/Lists/Posts/Post.aspx?ID=259
    And then, you can use the following solution that can be used to
    group by on more than 2 columns in a view
    to implement it in SharePoint Designer 2013.
    http://techtrainingnotes.blogspot.com/2011/01/sharepoint-group-by-on-more-than-2.html
    http://chanakyajayabalan.wordpress.com/2010/03/15/group-by-for-more-than-two-columns-in-sharepoint-list/
    Best Regards,
    Linda Li
    Linda Li
    TechNet Community Support

  • How to add more fields at level task for importing to MsProject

    Hi everyone,
    We would like to have the same number of fields either for importing as exporting; or at least, the fields that we need.
    The problem is when we are configurating the fields for exporting from cProjects to MsProject, we found 81 available fields and then we don't find the same amount for importing (34). So, in some cases we don't find fields which were configurated for exporting and it is no posible to upload the information back because the field is no available for importing.
    Does anyone knows how to add more fields for importing at the cProjects side?
    Thanks a lot,
    CAMILO URIBE

    Some fields can not be migrated because of MsProject designe. The above is the reason why cProjects' customizing does not offer the
    mapping of the same nuember of fields.

  • How do I add more email inboxes to the Mail application?

    Hey guys!
    Just a quick question! An answer in which I'm sure will be simple. How is it I add more email inboxes to the pre-installed "Mail" application? In other words, I have two email addresses in which both are used by myself. One is Yahoo, and the other Google Mail. How is it I can view both of the inboxes for these email addresses at the same time on the mail app?
    Regards & thanks for any answers!

    One option available is to open a new viewer window and then select the mailbox.
    Mail >  File > New Viewer Window

  • How to add more than one tabular region in a page?...

    How to add more than one tabular region in a page?
    i have a page, that page contain form and tabular region. when i trying to add another tabular region it showing error
    1 error has occurred
    Updatable SQL Query already exists on page 2. You can only add one updatable SQL query per page. Select a different page.
    but i have to add the tabular in that page.
    Is it possible?
    pls help...
    Thanks and regards,
    skud

    hi,
    even i am searching for some thing similar.
    i want to have 3 calendars in one page.
    getting same message calendar already exists on page 2. You can only add one calander per page. Select a different page.
    pls help.

  • How to add a new data element for existing table filed(Primary key field)

    Hi Experts,
    How to add a new data element for existing table field(Primary key field)
    For this filed ther is no foreign key relation ships and even check table.
    while activating table it is giving message like below.
    can you help any one to solve this and wil steps to add new dataelement for existing primary key filed of a table.
    Check table (NAMING SPACE/TABLE NAME(EX:/TC/VENDOR)) (username/19.02.10/03:29)           
    Primary key change not permitted for value table /TC/VENDOR
    Check on table  /TC/VENDOR resulted in errors              
    Thanks
    Ravi

    Hi,
    Easiest way is to download the table eg into an Excel table (if possible) or text table. Drop the table from the database. Build your table with the new key field. Build the database table again and fill it.
    You can do it also over the database into a new table. Drop the old one. Build the enhanced one and fill it. Afterwards drop your (temporary) table.
    Maybe there are other ways, but this works.
    Success,
    Rob

  • How to add more functionalities to personalization dialogue box in portal

    Hi
    How to add more functionalities to the personalization dialouge box in sap portal?
    Just like User Profile tab, how can I add my own functionality to personalization dialouge box?
    I want the functionality to appear as a tab under Detailed Navigation in Personalization dialouge box - similar to User Profile, Work Protect Mode tabs which are already there under detailed navigation in personalization.

    Thanks Gyan.
    Below is the code for creating list box :
    OAApplicationModule am = pageContext.getRootApplicationModule();
    OAViewObject listVO=(OAViewObject)am.findViewObject("LocationsLOVVO");
    OAWebBeanFactory list1 = pageContext.getWebBeanFactory();
    OADefaultListBean list = (OADefaultListBean)list1.createWebBean(pageContext, OAWebBeanConstants.DEFAULT_LIST_BEAN, null, "LocationsList");
    list.setListViewObjectDefinitionName("oracle.apps.irc.lov.server.LocationsLOVVO");
    list.setListValueAttribute("LocationCode");
    list.setListDisplayAttribute("LocationCode");
    list.setSize(6);
    list.setMultiple(true);
    list.setName("Location");
    OAMessageLayoutBean listboxbean = (OAMessageLayoutBean)webBean.findChildRecursive("AplmessageLayout");
    listboxbean.addIndexedChild(list);
    But it is not inserting all the location values in the list.
    Regards,
    Gaurav.

  • How to add more comments in the Nomination Header notes tab

    Short Text 
    How to add more comments in the Nomination Header notes tab 
    In the nomination screen, there are the tabs for header and item notes.
    Within each of those tabs, there are categories for the type ofcomments. Currently in the nomination maintenance screen header notes
    there are onlythree comment categories are available 1) General comments 2) Carriercoment 3) Shipper Comment and We would like add more comments in this
    section. In the configuration we couldn't find a place where we can add
    more customer specific comments. Can we add comments in the header
    notes tab and if so where can we add the additional comments ?

    Hello Giri,
    You could try the following to create new text types for nomination header.
    1) Execute transaction SM31
    2) The view here is V_TTXIDI
    3) Click on maintain .
    4) Create new entries .
    5) Since you want to add new more comments in the nomination header enter the text object as OIJRCODE_H
    6) Enter a text ID starting with Z
    7) Enter a description and save the new entry.
    In case you want to add new comments at the item level use the text object as OIJRCODE_I.
    When you restart the transaction O4NM again you will see the new entry added.
    This will solve the issue.
    Regards,
    Sandil

Maybe you are looking for