CWB - Salary Plan - Review and Submit section is not working

Hi All,
I am implementing Compensation Workbench and after successfully plan design I am able to see the plan on CWB admin home. Set Budgets and Allocate Compensation functions are working perfectly but Review and Submit and Manage Approval Functions are not working , means when I access the Review and submit section the submit for approval button even all other buttons are not working means when press, nothing happen, it looks that no code is written behind the buttons.
first of all I would like to confirm that without this Can we Increase the salary amount in the payroll elements? if this is the necessary part Can we bypass this part after doing Allocate compensation function ? If no bypass then kindly suggest what to do because I am unable to update the employees salaries due to this problem.
Regards,

Hi, Any update guruz.

Similar Messages

I have an Iphone 4 and my internet has not worked for a good 10 months, why wont it work? my dad pays for my data plan, so its not that i dont pay my bill. I've even tried to reset my net work settings, and that did not work

i have an iphone 4 and my internet has not worked for a good 10 months, why wont it work? My dad pays for my data plan, so its not that i dont pay the bill. I've even tried to rest my net work settings, and that did not work. I went to AT&T and they said that the only way to fix it was to buy a new phone, and im not going to buy a new phone with out my upgrade. someone, please help!

Hey lilmissindian!
I have an article for you here that will help you troubleshoot this issue:
iPhone: Troubleshooting a cellular data connection
http://support.apple.com/kb/ts3780
Thanks for coming to the Apple Support Communities!
Cheers,
Braden

TS4062 My Iphone won't appear in my devices in Itune.... And the WiFi does not work on my phone.... I seems like there is no solution to update my phone to the new ios on my computer or WiFi without using the 3g because of this!!! help me out

My Iphone won't appear in my devices in Itune.... And the WiFi does not work on my phone.... I seems like there is no solution to update my phone to the new ios on my computer or WiFi without using the 3g because of this!!! help me out

Hello there, TempestBelcher.
It seems you've covered all the bases, but feel free to review the iPhone Troubleshooting Assistant for connectivity here:
Apple - Support - iPhone - Calls Troubleshooting Assistant
http://www.apple.com/support/iphone/assistant/calls/#section_0
If you've followed all the instructions then there are a few good recommendations for what to do next in the last step.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D.

ADOBE LiveCycle Designer 8 - EMAIL SUBMIT BUTTON DOES NOT WORK

I created a new form in Adobe LiveCycle Designer 8, but the email submit button, nor a regular button assigned with a 'submit' function will do anything. It should initiate a new Outlook email but it does not. My default programs are set correctly (default email program and the default "mailto" program are set to Outlook). This document was created not only with ALC8, but on a Windows Vista PC with MS Office 2007. I ran a test to see if it would work on a WinXP SP2 machine with Office 2003 and it still did not work.
Can anyone help?

Alan
Though not an expert, I've created a few forms with the Submit by Email button. If you've already done this then sorry for asking, but did you go through the Acrobat Distribution (Forms>Distribute Forms)process after creating the form in LC8? As far as I can tell the email submit button doesn't work without this stage.
This confirms the email submission address, then sets up a dataset to be saved in a location of your choice.
filename_dataset_0001.pdf
then a file type that can be edited, saved and submitted by Reader users:
filename_pub_0001.pdf
You can save this to your intranet server or email direct to the recipient.
When the submit button is then used you receive a copy of the whole form which on opening will prompt you to add it to the dataset. Receiving and adding multiple forms to the data set is straightforward. You will see them all listed in the viewer above the form itself. From here you can also then select and export the data to Excel via xml or as a csv file.
Note that any changes you make to the form should be to the original document and the distribution process repeated, otherwise the functionality of the form will be affected.
That's about the limit of my knowledge I'm afraid, therefore if you have already tried this and are still having problems then hopefully someone else can help out.
Regards

Got iPhone 5. Really Disappointed! After 2 days, alert and typing sounds are not working. Camera is terrible!

Bought iPhone 5. Really disappointed. Within 2 days, alert sounds and typing sounds are not working. Camera is terrible. My old HTC One S was far superior!

First, no, it is not showing orange. I checked the silent button immediately. Then I checked the sounds section of my settings, but all is good there. When I get a phone call, it rings fine. Alert and typing sounds are not working.
Second..., yes this was a technical point (in which I was hoping someone else might have had the same problem, with a solution), as well as a complaint (definitely one worth making as it is not a minor issue - it is important to hear text alerts when you have children).

My lap top name is hp pavilion dv 600. and my micriophon is not working . i am using windows 7.

My lap top name is hp pavilion dv 600. and my micriophon is not working . i am using windows 7. before that i was using widows vista. in the cotorl panel in the hardware and sound section . in the sound section in the recording tab it is written that microphone is not plugged in while i have microphone in front of my screen . could any one help me.?????

Try to disable transparency in Windows, see:
*[[/questions/804050]]
Right click in a free space on your desktop. 
Left click on Personalization. 
There are four options at the bottom of the screen, choose "Window Color and Appearance". 
Select a border color 
Uncheck: "Enable transparency" 
Try to disable hardware acceleration in Firefox.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
*https://hacks.mozilla.org/2010/09/hardware-acceleration/
*https://support.mozilla.org/kb/how-do-i-upgrade-my-graphics-drivers

Does not open default site.Needs retry in favorites. Back and forward arrows do not work

Facebook is the defaulkt address but, when I open Firefox thw scrren is blank (bar are present, though). This happens after last review
In addition, back and forward arrows do not work (this has always happened since Firefox 4 beta)

* First to prevent interferences between current and Beta versions, use a specific [[Managing profiles|profile]] for Firefox 4.0 Beta. In your new Beta profile, you can recover all your customizations from your 3.6 profile. See [[Recovering important data from an old profile]].
* Then, if it is not fixed, see [[Back and forward or other toolbar items are missing]].

Thanks for responding. Since I upgraded ITUNES to IOS 6, my IPOD Touch no longer works at all. I had numerous apps, music and videos on this touch. It made me restore to factory reset and it still does not work!!! Nothing I do will work on this touch n

Thanks for responding. Since I upgraded ITUNES to IOS 6, my IPOD Touch no longer works at all. I had numerous apps, music and videos on this touch. It made me restore to factory reset and it still does not work!!! Nothing I do will work on this touch now. I have so much data on this, I don't want to loose or have to restore!
Can you help me?
Thanks

If you restored to factory settings/new iPod and still have the problem that indicates a hardware problem.
Make an appointment at the Genius Bar of an Apple store..
Apple Retail Store - Genius Bar

TA44551 My 1-year ipod nano locked up and would not start overnight. The on/off button will not work and stopped holding charge. No water damage, no fall, nothing unusual. I restored it (twice) but it will still not hold charge and on/off does not work.

My 1-year ipod nano locked up and would not start overnight. The on/off button will not work and stopped holding charge. No water damage, no fall, nothing unusual. I restored it (twice) but it will still not hold charge and on/off does not work. I tried to restore it again and charged it in three different locations with different cables. etc but nothing. Suggestions?

- After charging for 1/2 hour or so, does iTunes see the iPod? If yes, restore the iPod from backup.
- If no, se if placing the iPod in recovery mode will make it visible so you can restore the iPod. For recovery mode see:
iPhone and iPod touch: Unable to update or restore

HDMI and PC inputs do not work on my 37AV502R LCD TV

HDMI inputs and PC inputs do not work consistently
my Apple TV (HDMI) and computers 2 on HDMI, 1 on PC, display just fine n the TV but after a while the TV goes blank,
the time is not consistent sometime a few minutes, sometimes a few hours,
but every time, after the TV goes blank there is nothing I can do, the TV just stays blank, if I unplug and turn back on the TV displays the image for a split second and goes bank again,
I thought it might be an overheating thing, however sometimes the PC input will stop working but the HDMI input (either one) will work fine,
has anyone else had this issue?
Thanks
A.

I'm having the same issue. As soon as I connect it to VGA or HDMI, it goes into a cycle of flashing on-and-off. A guy on youtube had the same problem (posted a video identical to my problem) and reportedly fixed it with a firmware update.
The problem: the US website doesn't have a firmware download. The canadian website does, but the update is from 4/2009, and the manufactured date on the back of my TV is 5/2009. (I also tried the update, but it didn't fix the problem).
When I call Toshiba to ask about the firmware update, after they confirm I am out of warranty, their automated system keeps hanging up on me. So frustrating.

How to delete video from iTunes library? del and shift+del are not working - no any reaction

how to delete video from iTunes library? del and shift+del are not working - no any reaction.

seb963 wrote:
Hi
Currently, iMatch is turned off on my computer, as I do not want to upload any more songs. If I turn it on, will it upload all songs that are currently in my library? Is there another way that deleting them one by one?
You must enable iTunes Match on the new computer. The best way to accomplish what you want to do is to create a new, empty library by launching iTunes while holding down the Option key (Shift on Windows) and choosing "new library." Do not let iTunes scan for new content, but do enable iTunes Match on the empty library. Once the scan is finished you may delete tracks from the cloud. When you are done switch back to the main iTunes library.

TS5376 I'm having a problem with downloading and installing the new version of itunes for windows (11.1.4) I have done everything the troubleshooting article has said and it is still not working properly.

'm having a problem with downloading and installing the new version of itunes for windows (11.1.4) I have done everything the troubleshooting article has said and it is still not working properly. I have even done a repair to see if that works and it has not. Has anyone else found a new way to get it working?

Try Troubleshooting issues with iTunes for Windows updates.
tt2

Please is an emergenci!!! I put my iPhone 5 to charge and the cable is not working I tried in other pluggers in the house but nothing I don't know what's wrong and I don't have any more battery

Hey I plug my iPhone 5 and the charger is not working and I'm freaking out!!! It never hasn't happened and I just have in this moment 4% I all ready tried on pther pluggers on the house and is the charges that doesn't work. What should I do?

@whimsei,
Hello and thank you for posting back. What it sounds like is the cable that connects to the screen from the motherboard has either come loose or has a issue after the fall.
To fix this it would have to be opened up and the connections checked. If there is an issue with the cable then it would have to be replaced. This will require either you opening up the system yourself and checking the connections and tha cable or sending it in for repair.
Here is the link to the maintenance and service guide. If you feel comfortable doing the work it will help you.
HP 2000 Notebook PC Compaq Presario CQ58 Notebook PC
Maintenance and Service Guide
If you want to send it in for repair here is how.
Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Please let me know how things go.
Thank you again for posting and have a great day.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
D5GR
I work on behalf of HP

I bought an IPAD air from state and the screen is not working correctly and right now i'm in Egypt ,can i send my ipad to service in Egypt and the warranty will work in Egypt or what?

i bought an IPAD air (32 gb wifi only) from USA just one month ago and the screen is not working correctly(picture attached) and right now i'm in Egypt ,can i send my ipad to service in Egypt and the warranty will work in Egypt or what?

Have you tried a soft-reset to see if that fixes it ? You might be able to get warranty service in Egypt for your iPad, but the warranty includes :
IMPORTANT RESTRICTION FOR iPHONE AND iPAD SERVICE.
Apple may restrict warranty service for iPhone and iPad to the country where Apple or its Authorized Distributors originally sold the device.
As it's wifi-only you should have a better chance of it being serviced under warranty, but there are no guarantees, it might depend upon the repairer.
Egypt authorised service providers : https://locate.apple.com/eg/en/

With version 5 of Firefox, if I open more than 1 session, most of the time I cannot see anything in the navigation bar and my back and forward buttons do not work.

I open 1 session of Firefox 5.0.1 and everything seems to work fine. Then I open a second session of Firefox and most of the time the navigation bar does not show the page that I am on and the back and forward buttons do not work. When this happens, the first session always remains working. I am an internet marketer so I have at least 2 or 3 sessions going at any given time.

A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
Start Firefox in [[Safe Mode]] to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

CWB - Salary Plan - Review and Submit section is not working

Similar Messages

Maybe you are looking for