CWBQM - Allows duplicate material Assignment record.

Hi All,
Can any one tell me is there any sap note is available for Work bench transaction CWBQM, in order to fix the issue of "duplicate material assignment record" in MAPL table.
For example If you assign Plant "100" and material "M1" and customer " C1" to an Inspection plan through CWBQM,system allows to add the record in MAPL table which already contains the same record, whereas if you try to do it thru QP02-Material asignment ,system throws error message "Material has already been assigned to the inspection plan".
Thanks for your valuable time.
Regards
Anbu

Hi
As QP02 does not allow to enter the customer system only considers it as unique plant & material combination....whereas in Workbench you can able to enter customer so system consider unique plant-material-cutomer.
There is no such a Note available in QP02.
Regards
Sujit

Similar Messages

Duplicate material assignment

Hello friends,
I want to avoid duplicate material assignment to the network.
This control should be active when I hit the 'Enter' key before saving the network.
Early response is appreciated
Regards,
Praveen Javali

Dear Virendra,
We have already tried this exit, no desired solution.
Thanks,

Prevent creation of duplicate material master record

Hi Experts
1) Is there any control or validation to prevent creation of duplicate material? I mean, if the description of new material is 100% or 95% matching with an existing material, there should be a validation.
2) Is there any feature of usage of catelogs for creation of material master description?
warm regards
ramSiva

Hi,
Have a try to use Enhancement: MGA00001, user exit: EXIT_SAPLMGMU_001 for control you need.
You can also use BAdI for this:
BADI_MATERIAL_CHECK -> method CHECK.
In both enhacements there is a structure STEXT - here short text(s) of new created material should be found for validation.
Here you can make some ABAP works necessary.
Hope it helps,
regards,
w.
Edited by: Wojciech Zalech on May 19, 2010 9:43 AM

Duplicate material master records ?

There are duplicate material master for the same material. In some cases there are more than two master data for the same material.?

Hi,
They material are internal number or external number.
If internal number then only the discription might be the same with 2 or more material number.
If external numbet then check the 2 same material how the difference in material number.
If you want to delete or block then check the inventory status in the material.
then do the further action.
SAM

How to duplicate material master record to other plants

Dear Experts,
I created a material (by transaction MM01).
Since I have 9 different plants, I'd like to duplicate it for each plant. The only way I found is by transaction MM01 using the section "copy from...".
Do you have any more quick solution?
thank you all
federica

Hi,
Goto transcation MM17
Select tables MBEW & MARC and click on fileds tab
Select your fields, what ever you want in the purchase and accounting view. If you are using split valuation, then select valuation category. But first time, don't select valuation type.
Execute
Click on DATA RECORD TO BE CREATED tab
Enter Material no and Plant code ( For this plant, you need to be extend material)
Put on crusher on the field VALUATION TYPE and click on the very first icon SELECTION OPTIONS (which is at end of the section and adjust to the delete icon). Double click on the SINGLE VALUE. So, in this case Valuation type is equal to blank value.
specify allready existing material number and plant code in the reference section ( these are at end of the screen) .
click on execute and enter values. click on save. Material number is extended.
If are you using split valuation, then do same process/excersie once again.
This time select table only MBEW and filed Valuation type.
Regards
KRK

Fact Table allows duplicate records

Is Fact Table allows duplicate records?

What do you mean by duplicate records? It could be what appears duplicate to you is having some other technical key info that are different in the fact table.
At technical level, there wouldn't be duplicate records in fact table [in SAP's BW/BI there are two fact tables for each cube - which can itself cause some confusion]

How to write new userexit to assign customer material info record to a cust

Hi Guru's,
how to write new userexit to assign a customer material info record to a customer hierarchy
please provide step by step process that would be helpfull to me..
thansk in advance and will give full points..
Srinivas...

Hi,
Can u please give me the clarification whether u want to create new exit or u want to enhance the existing one?

Overlapping Number Ranges for GL Accounts - does this allow duplicates?

Hi there,.
I am just-trying to understand GL numbering ranges.
If I create two GL account groups with overlapping number ranges, what (if anything), is stopping me from creating two GL accounts with identical numbers.
When l try to do this in fs00 I get a message telling me that the account already exists in the company code. Surely having the concept of an account group with overlapping number ranges implies that the account group forms part of the GL account's unique key and therefore allows duplicate GL account numbers.
Or does overlapping mean the ranges ovelap but the GL account numbers have to be unique?
Confused
Gerald.
Edited by: Gerald Dunn on Apr 26, 2011 6:57 PM

Hi,
Since a chart of accounts contains many different types of accounts, they can
be grouped into different account groups. Usually, one account group groups
accounts with the same tasks within the general ledger, for example, cash accounts,
material accounts, asset accounts, profit and loss statement accounts, and so on.
By assigning a number range to an account group, you can ensure that accounts
of the same type are within the same number range. Number intervals for G/L
account master records can overlap.
You must enter the account group in the chart of accounts segment; it controls the
appearance of the company code segment of a G/L account. For example, for all
of your cash accounts, you want to be able to display all of the line items. In
Customizing, you therefore alter the field status for your Cash Accounts account
group to make line item display a required entry field.
Thanks
R.K

Close period for material Master record error

my current period is 07 2010.
I want to close period 07 2010, and make new posting to period 08 2010.
but when i do the posting, system show error "Posting only possible in periods 2010/07 and 2010/06 in company code C999"
PS: C999 is the company code that contains the plant P999
And when i try to close the current period of material Master record by MMPV, system show below information :
"L O G
Mode: Check and close period
Client: 000
Period entered (month/year): 07 2010
Incorrect period in control rec. of CoCd C999; no conversion The current period (month/year) of the control record is 07 2010
Period closing complete; log issued.
E N D"
and my current OB52 setting is below:
Please help to supply some suggestion.
P999     +               1     2010     12     2010     13     2010     16     2010
P999     A          ZZZZZZZZZZ     1     2010     12     2010     13     2010     16     2010
P999     D          ZZZZZZZZZZ     1     2010     12     2010     13     2010     16     2010
P999     K          ZZZZZZZZZZ     1     2010     12     2010     13     2010     16     2010
P999     M          ZZZZZZZZZZ     1     2000     12     2010     13     2000     16     2010
P999     S          ZZZZZZZZZZ     1     2010     12     2010     13     2010     16     2010
V001     +               1     2000     12     2010     13     2000     16     2010

Hi,
Check in T.code: MMRV and see which period is open for ur Co.Code and back posting is allowed or not. If you are sure to open new period now of new posting to period 08, then
use t.code: MMPV ,
enter
Company code C999
Period to open 08
Fiscal Year 2010
Execute
( system will close the period last period 07 and automatically system open the new one 08)
Now try ur transaction.
if any problem, then check in FI Side:
Use t.code: OB52 and open the 08,2010 period in Account Types A, K, D,M, S and specially Account Type u201C+u201D which stands for valid for all accounts type and save. Better consult FICO consultant for OB52 step.
Regards,
Biju K

Mass Material Master Records Extension

Hi All,
Mass Material Master Records Extension
I have a list of 50 materials.
I want to extend them to new sales areas and plants.
Is there a t-code for mass extension of material master records,
Please advice
thanks in advance
Rgds
Priyanka

The Options are:
1. LSMW
2. SCATT
3. BDC
It is not recommended through MM17 ot MASS.
Abap help can be taken to develop the BDC / LSMW accordingly.
Regards,
Rajesh Banka
Reward suitable points.
How to give points: Mark your thread as a question while creating it. In the answers you get, you can assign the points by clicking on the stars to the left. You also get a point yourself for rewarding (one per thread).

Primary key allows duplicate entry in data dictionary

Hi Friends,
                 I have created table to save contact details. here i have assigned USERID and CELL_NO as primary key but when i am trying to create new entry it allows duplicate value. How can i prevent this ?
Please review my attached image for more details.
Thank you Friends.

Hi Karthi,
              I think table logic is correct. it mean if you entered both primary key same only it wont allow but here you mentioned same cell no but different ID so it will accepts.
E.g
     cell no 1234
     user id xxx
     cell no 1234
    user id xxx
above logic wont allows
but you mentioned
cell no 1234
user id xxx
cell no 1234
user id xyz
if you need to remove duplicates mean you should maintain primary key as cell no only not both..
revert back if you didnt get clear.
Regards,
   Thangam.P

SQLLDR direct path allows duplicates in primary key

I would like to use sqlldr direct path to load millions of records in the table but direct path allows duplicates on the primary key constraints.
inserts duplicates
sqlldr deploy_ctl/deploy_ctl@dba01mdm control=ctl_test.ctl direct=true
primary key is enabled
I am not understanding the behavior that why primary key is still enabled -- (logically it should have disabled than inserted duplicates)
does not insert duplicates
sqlldr deploy_ctl/deploy_ctl@dba01mdm control=ctl_test.ctl
primary key is enabled
Please can I know if there is any work around to use direct path with primary constraints in place.

Dear,
Look at the following example
mhouri.world> drop table t1;
Table dropped.
mhouri.world> create table t1 (id number);
Table created.
mhouri.world> alter table t1 add constraint t1_pk primary key (id);
Table altered.
mhouri.world> select table_name, index_name, status
2 from user_indexes
3 where table_name = 'T1';
TABLE_NAME                     INDEX_NAME                     STATUS
T1                             T1_PK                          VALID
mhouri.world> select count(1) from t1;
COUNT(1)
         0                                                                      and here call sqlldr
C:\>sqlldr xxx/xxx@xxxx control=c.ctl bad=c.bad direct=trueAnd see what happen to the primary key index
mhouri.world> select count(1) from t1;
COUNT(1)
         4
mhouri.world> select * from t1;
        ID
         1
         2
         2
         3
mhouri.world> select table_name, index_name, status
2 from user_indexes
3 where table_name = 'T1';
TABLE_NAME                     INDEX_NAME                     STATUS
T1                             T1_PK                          UNUSABLE
mhouri.world> alter index t1_pk rebuild;
alter index t1_pk rebuild
ERROR at line 1:
ORA-01452: cannot CREATE UNIQUE INDEX; duplicate keys found The primary key index is made unusable and this is why you have duplicate records
best regards
Mohamed Houri

Material Assignment in Master recipe

Hi,
Is there any FM/BAPI to assign material into a master recipe? Currently, we are using BDC to call C202 transaction for this purpose. This process takes long time for material assignment which leads to performance issue.
Thanks in advance
Senthil Kumar A

In LSMW , object BUS1012 is offered for routing creation and change .
Unfortunately there is no object for master recipe creation & change and there is no standard batch input, nor BAPI/IDOC, nor direct input. You should create your own batch input or CATT.
Here is a possible procedure:
Please record a Batch-Input with transaction SHDB and try if this work. If not please try with TOFF as described in the notes.
Read carefully SAP note 142022.

Message : Document type doesnot allow you to assign to object VBAP

Hi All,
I am attaching a document that is been created through CV01N to transaction VA02 at item level.when i am trying to put that document no. at item level on the Extras-Documents- system is giving me a message as "Document type doesnot allow you to assign to object VBAP".
similarly if i take this document no from F4 screen,it comes but when i check the same after saving the document gets disappeared.
while the same document is getting attached at material master easily.
I think some customization is missing for the same..plz let me what i need to do to resolve the same.
Thanks & Regards,
Sandeep Sharma

Hi Sandeep,
The mentioned error message indicates to me that you do not have maintained the object VBAP in transaction DC10 to your relevant document type.
Please see the WIKI page https://www.sdn.sap.com/irj/sdn/wiki?path=/display/plm/ca-dms-Object+link for all necessary customizing settings to achieve a proper object link behavior.
Further please check if note 1034682 could be also relevant for you, because I do not know your current release.
After all the settings in DC10 and TDWOD are maintained the document should be linked to the VBAP objects.
Best regards,
Christoph
P.S.: Please reward points for useful information.

MM_SPTOCK - Problems when Material assigned to more than one Batch Id

Hi Experts,
We are using MM_SPSTOCK object for archiving Batch Records. While executing this Archiving object ,Suppose we have a case where there exists a material assigned to more than one batch .Lets Say B1 and B2 for Material M1. If we are interested to archive the Batch record M1 B1 then M1 B2 also getting archived even though the batch B2 is not specified in the selection criteria of MM_SPSTOCK .This leads to Data inconsistency.Is there anything that we need to do in order to save the second batch record getting archived.Please suggest.Let me know if you need any information
Kind regards,

Hi All,
Let me know if you come across this situation anytime and have a work around for this.

CWBQM - Allows duplicate material Assignment record.

Similar Messages

Maybe you are looking for