CWBQM - Mass Material Assignment

Hi Experts
We have to assign more than 100 000 materials to inspection plans.
I found the transaction CWBQM.
As the table in 'CWBQM->Material-Task List Assignment' is  a table control
I can only assign around 30 materials.
How can I add all materials (like multi-selection) into the assigning-table in CWBQM
OR how can i assign all materials to an inspection plan.
Thx for help
Christian

What do I have to do in this transaction?
Is it very complicated or need I much time for this?
If Yes, I think I am faster when I create a BatchInput.
Thx for your fast answer
Christian

Similar Messages

  • Mass Material Assignment to Cost Object Hierarchy

    Hi,
    I have to assign the materials to Cost Object Hierarchy. I know that it is done thorugh TC- KKPHIE.
    But if I have to assign more than 1000 materials at a time , I cannot do that in mass.
    I tried to do it thorugh LSMW. The system is not allowing it to create LSMW.
    I am stuck. Please let me know is there any other method of material assignment in mass.
    Or any other transaction code.
    Hoping to hear

    Hi Ravi,
    I have tried using LSMW and BDC. Its not working.
    Is there any other transcation of material Assignment to Cost Object Hierarchy.
    regards
    Kami

  • CWBQM - Allows duplicate material Assignment record.

    Hi All,
    Can any one tell me is there any sap note is available for Work bench transaction CWBQM, in order to fix the issue of "duplicate material assignment record" in MAPL table.
    For example If you assign Plant "100" and material "M1" and customer " C1" to an Inspection plan through CWBQM,system allows to add the record in MAPL table which already contains the same record, whereas if you  try to do it thru QP02-Material asignment ,system throws error message "Material has already been assigned to the inspection plan".
    Thanks for your valuable time.
    Regards
    Anbu

    Hi
    As QP02 does not allow to enter the customer system only considers it as unique plant & material combination....whereas in Workbench you can able to enter customer so system consider unique plant-material-cutomer.
    There is no such a Note available in QP02.
    Regards
    Sujit

  • Mass Material Master Records Extension

    Hi All,
    Mass Material Master Records Extension
    I have a list of 50 materials.
    I want to extend them to new sales areas and plants.
    Is there a t-code for mass extension of material master records,
    Please advice
    thanks in advance
    Rgds
    Priyanka

    The Options are:
    1. LSMW
    2. SCATT
    3. BDC
    It is not recommended through MM17 ot MASS.
    Abap help can be taken to develop the BDC / LSMW accordingly.
    Regards,
    Rajesh Banka
    Reward suitable points.
    How to give points: Mark your thread as a question while creating it. In the answers you get, you can assign the points by clicking on the stars to the left. You also get a point yourself for rewarding (one per thread).

  • Material Assignment in Master recipe

    Hi,
    Is there any FM/BAPI to assign material into a master recipe? Currently, we are using BDC to call C202 transaction for this purpose. This process takes long time for material assignment which leads to performance issue.
    Thanks in advance
    Senthil Kumar A

    In LSMW , object BUS1012 is offered for routing creation and change .
    Unfortunately there is no object for master recipe creation & change and there is no standard batch input, nor BAPI/IDOC, nor   direct input. You should create your own batch input or CATT.
    Here is a possible procedure:
    Please record a Batch-Input with transaction SHDB and try if this work. If not please try with TOFF as described in the notes.
    Read carefully SAP note 142022.

  • Material Assignment in routing ?

    HI Gurus,
    can anybody please Explain in which business scenario Material assignment In routing is used.i am confused about the functionality in the business .
    Thanks&regards,
    Venkat.

    Dear Venkat,
    Routing is the sequence of operation/activities through which production takes place across the work centers ( machines ) which is created by pp consultant.
    Example : If you want to stitch a shirt we many need to do following activities.
    Taking the measurements from the user
    Cutting the fabric according to measurements
    Stitching / sewing  ( Joining the parts like collar / hands / Yoke / Pocket  / Cuffs....Etc)
    Buttoning ( adding the buttons to shirt)
    Quality checking
    Ironing
    Packing ..etc.
    In the same way based on the product you are going to do it might have some steps to make it, we will maintain the same steps / sequences as ROUTING in SAP PP.
    Regards,
    N.S.Rao

  • Tables for mm03 (specification-material assignment)

    Hi All,
    We have a need to find out which material masters are assigned to GCD (Global Chemical Database) specifications.what are the possibilities from Material master side.
    Specification information (in tab "Spec assignment") on material master side is on a structure RCGMMJIOT. can anybody help with the table name for the corresponding structure.
    Thanks in advance

    HI Vibhuti,
    More detailed information about EHS tables are as follows
    Description--> Table Name
    Specification Header     ESTRH
    Identifiers     ESTRI
    Identifier - Regulatory list assignment     ESTRL
    Referencing in specifications     ESTRR
    Specification  - Material assignment     ESTMJ
    Specification status assignment     ESTST
    Specification - Value Assignment Type Assignment (Property tree)     ESTVH
    Value assignment Item (e.g.  composition values)     ESTVP
    Shadow table for AUSP (Characteristic values)     ESTAUSP
    Additional Information: Value Assignment Assessment     ESTDR
    Additional Information: Value Assignment Source     ESTDS
    Additional Information: Value Assignment Usage     ESTDU
    Additional Information - User-Defined Text     ESTDF
    Value assignment table (Classes)     ESTVA
    I hope this complete list may will be helpful for you.
    Regards
    Amol

  • BAPI to change material assignment with serial number (IQ02)

    Hi Experts,
    Please let me know the BAPI to change material assignment with serial number in IQ02. I am using BAPI_EQUI_CHANGE, but this does not work. Waiting for Your valuable inputs...
    Thanks in advance,
    Birendra

    Hello Birendra,
    Honestly, I do not have good experience with the BAPI for serialnumber change...
    would suggest to explore function module:
    SERIALNUMBER_LIST_UPDATE
    or
    SERIALNUMBER_LIST_SAVE
    Also run ST05 to trace what kind of data it passed to these function modules by running IQ02!
    Cheers
    Krish

  • MM_SPTOCK - Problems when Material assigned to more than one Batch Id

    Hi Experts,
    We are using MM_SPSTOCK object for archiving Batch Records. While executing this Archiving object ,Suppose we have a case where there exists a  material assigned to more than one batch .Lets Say B1 and B2 for Material M1. If we are interested to archive the Batch record M1 B1 then M1 B2 also getting archived even though the batch B2 is not specified in the selection criteria of MM_SPSTOCK .This leads to Data inconsistency.Is there anything that we need to do in order to save the second batch record getting archived.Please suggest.Let me know if you need any information
    Kind regards,

    Hi All,
    Let me know if you come across this situation anytime and have a work around for this.

  • Routing creation with material assignment

    Hello sap gurus,
        I have created routing for semifinished product.Now i want to create routing for finished material but i want to use the same routing as we created for semifinished product by material assignment function in routing.when i go to do like that i am facing one problem.when i go to component assignment for finished material to operation,it shows the component over there which are in Bom of semifinished product,not the component which are in Bom of finished material.so how to do the component assignment if i create the routing by materail assignment function?
            Hope u have understood my problem.

    Hi Jitendra,
    Instead of making the scenario complex, I suggest you to go for separate routing and BOM for the semi-finished and finished product.
    How do you differentiate the routing of both the finished and semi-finished in only one ?
    regards
    Ram Kumar

  • Mass Role Assignment

    Is there any way to "Mass Role Assignment".
    What I mean from this is there are 100 users in the portal and I create a new role. Can I assign all the users the new role only in one step?
    I dont want to use group functionalities.
    Pls Help..
    Thanks
    Karan

    You can do this via the standard user administration in the Portal, but working from the Role instead of the users.
    In other words:
    1. Navigate to User Administration, Identity Management
    2. Set "Search Criteria" to Role and find your new role
    3. Choose the "Assigned Users" tab in the lower half of the screen
    4. Click Modify
    5. Set the Search Criteria to pick up all your users (you can do this and the next step in stages)
    6. Click Add to add them to the role
    7. Finally, with all the users assigned, click Save - this will do the bulk assignment of users to roles for you.
    Hope this helps,
    Darren
    <a href="http://www.fortybeans.com/">My blog</a>

  • QIP : material assignment button at header level

    Hi everyone,
    Since QM is not my main module  : can someone explain to me what the "material assignment" button is for in a quality inspection plan (at header level)?
    Thanks in advance
    P.

    "material assignment" : consider a scenario where there is two vendors for a particular material & your requirement is to check material of different vendor with different specification.
    Then in that case you can specify the Material ,plant & Vendor in "Material assignment " field.
    Say you have maintained vendor "X" in the task list & Vendor " Y" in other group counter for same material with differnt cherectiristics in it.
    So when inspection lot with vendor X will create ,system will automatically assign the task list with Vendor X in Material specification.
    same with vendor Y.
    If you do not maintain anything against material here ,irrespective of vendor same task list will attach to all vendors.
    Also Customer specific task list same as that of Vendor can be assigned through Material assignment
    I hope this will add some value.
    Regards
    Sujit

  • Custom Field is not updating using MM17 ( Mass Material Maintenance )

    Dear All,
          I have created 1 custom field in MRP1 view of MM01 tranction & that field saved into MARC table. It is working fine & I am able to change also that field using tranction code MM02. But Problem is that I want to change that custom field of material master using tranction code MM17 , which is for mass Material Maintenance. So to edit custom field of material master from MM17 what I need to do?  Please suggest...
    Regards
    Pradip Pawar

    Hi,
    Follow the below procedure,
    1. In table MARC  custom fields need to be add using append structure. For that need to create data elements & domain for      corrosponding fields.
    2.In SE51 need to copy standard program SAPLMGD1 & screen 2481( In your case screen would be different ) in to Z program.     
    3.Now in to the layout of  Z program need to add custom fieldu2019s which we defined using append structure in MARC table.
    4.Need to add Field statment for the new custom fieldu2019s into the PAI Flow logic of Z program inside CHAIN...ENDCHAIN statement.
    5.Need to run transaction OMT3B and then copy screen sequence no. 21 into our Z screen sequence say Z1.
    6.Once screen sequence is copied into screen sequence Z1. select sequence Z1 and double click on data screen folder.Select  screen sequence with description MRP1 and after selecting it double click on Folder 'Subscreen ' and change the program given for screen no 2481 with our Z program name and Save.
    Imp Note - Refer SAP Note no. 44410.
    Regards,
    Pradip Pawar

  • Std Network with Material assignment

    Hi,
    I am creating Project via Standard WBS and Network. I have also assigned few materials to this Standard NWP. There are few materials assigned to this std NWP all with Base QTY 1000.
    So when i add Execution Factor 10 when creating WBS, i expect system to divide Qty of material assigned on Std NWP by 1000 and then multiply by 10, but system is not dividing the Qty by 1000?
    Is there some config i need to do so that Base Qty maintained in Std BOM gets divided by the Qty of material that gets assigned to operative WBS being created?
    Regards,
    Jatinder

    Hi,
    To my knowledge, the execution factor is applicable only for the quantity at either the WBS or network activity level , not for the requirements it generates.  I may be wrong.

  • Table to check WBS-Network-Material assigned to this network

    Hi All,
    Plz advice. What table should i refer ,to check WBS element, network assigned to this WBS, and material assigned to this network.
    Thank you.
    Best Regards,
    Nies

    Hi Nies,
    Tables are as below:
    WBS elements - PRPS
    Network -CAUFV or AUFK - Pass the WBS element as PSPEL
    Material - RESB .
    Pass the reservation number into RESB. Obtain the reservation number from CAUFV table. You can pass WBSE ot Network number also. But RESB being a huge table, it is advisable to pass the key field "Reservation".
    Muraleedharan.R

Maybe you are looking for