CWBQM on MIC

Hi,
Can anyone tell me how I can remove selected MIC in CWBQM. I am still quite a dummy on this t-code.
Here are the steps I made.
1. Enter the work area.
2. Put in the task list number and then the MIC I want to delete on that task list
Then I'm stuck, I tried going to MenuExtraMass Change but I could not see Mass Change, I can only see Effectivity Parameters
Also How can we use CWBQM in changing the limits?
Help??

Run CWBQM
Enter Current Working Area as "Q_OPR_000000000010"
Press Enter
Enter on the "Additional Selection Criteria" button.
Now enter all your material codes or group number in this screen and then press "Ctrl+F7"
System will give you the entire MIC list.( goto-->Inspection char)
1. To mass chnage : Now select the MIC Column and select the relevant rows (may be all)
then follow the path.......Extras-->Mass Change and then enter the MIC . And then save.
it will update
2.Similerly only select the mic...Double click on mic--->change the limits of mic in quantitative data.
3.To delete : select MIC & click on delete button .

Similar Messages

CWBQM to remove MIC from Inspection plan

We have requirement to remove few MIC from multiple inspection plan. SO I wanted to use CWBQM trx for that purpose.
We maintain inspection plan with unique id of group and gp counter.
Group 111 Counter 1
Gp 111 Countr 2
.Group 111 Counter 110 and many more.
Q-1: From abouve list I don't want to update all inspection plan. I want to update for only few counter of each group. So how to enter these group and group counter combination in initial screen to do mass change.
Q-2: We wanted to remove MIC1, MIC2, MIC5 from all inspection plan. Where to enter these MICs in intial screen so system pull only those MIC list of insp plan? these are complete copy model MIC.
Q-3: As said earlier we wanted to remove MIC from inspection plan. Now after excuting CWBQM we are getting list of MIC. So do mass change I'm selecting MIC column and applicable row and clicking on Extra --> mass change. Then system is not giving me MIC in pop-up list. It gives me all other data including qnt and qualitative field of MIC, but we wanted to remove complete MIC from plan. how to do that?
Please help.
Edited by: Tom_Eric on Apr 15, 2011 5:39 AM

I'm following these steps:
CWBQM work area - Q_OPR_000000000010
Entering inspection plan data in selection screen - Ctrl + F7
Got MIC list
Select Master Inspection chara. column
Select row to delete particular MIC
Menu > Extra > Mass change --> Here I got two pop-up screen
One with name Mass change inspection char -- but this screen is empty - no field on this screen
There is one more screen which says "select fields" - List of fields like, lower limit, upper limit, catalog type, selected set, info feild, inspection method, plan, insp qualification, long term indicator, item......but there is no field which says MIC
If I select any field from second pop-up then it pull that field to mass change screen, but that I don't want to do. My purpose to remove MIC, not its field.
Please let me know where I am wrong?

Error message while re-placing the MIC

Hi all,
I want to replace a MIC (Complete copy model type) for the master recipe. When i tried to replace the MIC in QS27 i got the following error message.
Message no. QP879
Diagnosis
There may be several reasons that lock indicators appear in the first column. For example:
The master inspection characteristic is unlocked and only used as a copy model.
The characteristic is not completely maintained.
A user exit is active (see Implementation Guide).
The replacement was happening for "Reference char" but not for complete copy model.
I have to replace the MIC's for more than 2000 materials( Master Recipe). Kindly suggest how to address this issue.
My requirement is i want to change the version number of one particular MIC in all master recipe.
Example: To replace MIC_APP version 1 with MIC_APP version 2
Awaiting for your inputs
Regards
Hari
Edited by: Harikris_83 on Feb 20, 2012 7:15 PM

Hi FF,
Thanks for your reply.
I tried through CWBQM. But the working area is not available for master recipes.
It is available only for the following.
N     Routing
S     Reference operation set
Q     Inspection plan
Also i tried to create working area for master recipe in QCC0>>>Quality Planning>>Engineering work bench>> Define Work Areas.(Txn code: OQ77)
But here the Usage area by default it is coming as Q(Inspection plans) am not able to create for Master recipes.
Kindly suggest me how to proceed on.
If i go for LSMW option i am having the following issue.
One recipe group will have this MIC in operation 70 and the other recipe group will have this MIC in operation 80. Then how can be address this issue in LSMW, will it be possible through recording method?
Provide your valuable inputs.
Thanks and Regards
Hari

Mass change of control indicators of MICs

Can we do mass change of control indicators of MICs?
We having requirements to updated upper and lower limit for thousands of MIC in insection plans. what

Hi Tom,
Then itu2019s nothing but mass maintenance and very well possible. No need to develop any LSMW or BDC. Follow these steps.
1.     Execute CWBQM transaction code
2.     In current working area put Q_TSK_000000000010
3.     Click on additional select criteria
4.     Click on u201CInspection Characteristicu201D tab
5.     Below that, mention your MIC code, (ABC1 in your case), version of MIC and plant
6.     Then click on u201CInspection Characteristicu201D detail symbol. (Ctrl+F7 is the short key)
7.     It will load all the task lists with group numbers which contain this MIC.
8.     Click on u201CQuantitative datau201D Tab
9.     Here you find Target, Lower and Upper values.
10.     Click on Edit ->Select-> Select all and then go to Extras ->Mass change
11.     It will open all the fields in editable mode.
12.     Select one column. Letu2019s say Lower value column
13.     Again click on Edit ->Select-> Select all
14.     Then again go to Extras ->Mass change
15.     Then system will ask you to put new value
16.     Put appropriate value and execute.
17.     Similarly repeat this for all quantitative data.
Regards,
Anand Rao

Remove mass MIC from inspection plan?

How can we remove mass MICs from multiple inspection plan?
These are complete copy model MICs.
Can we use CWBQM? How?
Edited by: Tom_Eric on Apr 15, 2011 5:38 AM

I think this is same question with your another thread.
You can remove mass MIC at transaction CWBQM.
Regards
Luke

CWBQM - to change mass IP

I know that we can change mass inspection plan with CWBQM. We wanted to upload DMR rule at MIC level for thousand MIC in inspection plan.
Now in ur business we do IP change with change number only. So all IP have diff CO number. Now in our case can we do mass change of IP?
Do we hv to use one CO or we can use multiple?
Tom.

Hi Tom,
I also tried to map this requirement through CWBQM and facing the same problem that you faced. Hence I cannot comment whether it is possible in CWBQM or not.
But yes I tried through LSMW for QP02 and results were satisfactory. If I have understood it correctly, your requirement is to activate DMR at characteristic level for thousands of inspection plan. This option we find in header data of inspection plan. While recording LSMW kindly input following,
1.     Material code
2.     Group
3.     Group counter
4.     Key date
5.     Change number that you have already created
6.     Enter
7.     It will lead you to header data
8.     Here give suitable DMR and save
9.     Map all the fields correctly in auto field mapping and then prepare the template file to upload this data.
All the best. Get back in case you face any issue in LSMW.
Best Regards
Anand Rao

How do I use an external mic with the iPad4?

How do I connect an external mic to the new iPad4? Older models seem to have worked, but the lightning connector causes a lot of problems. I would like to use my Zoom H1 with my iPad4 and GarageBand. Any ideas? Thanks so much!

Secrets of the iPad Camera Connection Kit
http://howto.cnet.com/8301-11310_39-57401068-285/secrets-of-the-ipad-camera-conn ection-kit/
 Cheers, Tom

Mic problem in window 8.1 Pro ???

My Mic is not working in skype what i do ??? Mic is working well in sound recorder but not working in skype plz guide me . i am using external microphone .

To enable us to help you better, you need to provide as many details as you can about the problem you are experiencing.
If you design your question effectively, you can get good information from people who are knowledgeable about the topic and who are happy to help you.
Prepare your question. Think it through. Hasty-sounding questions get hasty answers, or none at all.
What troubleshooting have you done so far?
Asking an effective question will get you help faster read how here
Suggestions for asking for help on a site.
http://www.catb.org/~esr/faqs/smart-questions.html
Wanikiya and Dyami--Team Zigzag

I have recently upgraded my iMac Intel G5 iSight to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old sys parts

I have recently upgraded my iMac Intel G5 iSight (iMac5,1) to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old system parts. I have zapped PRAM. The blue indicator in system audio panel will appear for a second as I slide the bar for internal mic but then it disappears. Is there a fix?

The sound seems very faint but can here static on playback.

AS2 Receiver Error: MIC not verified # unexpected-processing-error

When sending out a test message using Seeburger AS2 receiver channel I get the following error:
MIC not verified # unexpected-processing-error
So obviously this problem is related to digital signature I think? However I get the same error even if digital signature is deactivated in the communication channel.
Do you have any idea on this?

Hi ,
I have been facing this error and tried all the refresh and reimporting of certificate.
"MIC not verified # unexpected-processing-error"
could you be bit specific how to fix this ?
thanks in advance
Praveen

Live! Cam Voice (mic not working)

Just bought Live! Cam Voice yesterday. Mic still not working properly even after verifying the installation. Please advise how to rectify.
Thanks,

Hi,
Is there any chance you could upload the drivers from the cd for me please because creative dont currently support the camera.
I can give it a trial run on my windows xp and give you some feed back after.
Thanks,
Rav

The difference between iPhone and iPod earphones with mic ?

What is the difference between the Apple iPhone Headset with Microphone and the Apple Earphones with Remote and Mic ?

mamarro wrote:
The iOS just WORKS as it should and is not glitchy at all like my experience has been with Android.
I had 6 Droid X's since laundh day on July 15th, and my wife has had 4 Droid Increidble's since she got her phone around that same time - and that one had been out for a few months before she got it even, so the "initial bugs" should have been worked out by then as there were a couple software updates to the phone (not even the 2.2 update I am talking about - just 2.1 updates to fix bugs) before she even got it.
And, that's another difference.....whenever there is a software update for the iPhone you get it IMMEDIATELY as there is no "hold" by carriers to tailor it to their own needs, etc., like there is with Android.
Good point about the updates, I believe the Fascinate just got the update that's been out for months already.

Linking MIC & Batch characteristic

Hey All
My understanding is that to move values from batch characteristic to MIC we need to maintain the link in MIC and this relationship is one to one relationship.
We have a business requirement as below. I do 2 types of testing i.e. official & vendor. First i do vendor testing and this will be reflected in the batch. After this i do official testing and this needs to overwrite the vendor results and update the batch automatically.
If i have to use the batch characteristic + MIC link, then i need to create 2 batch characteristics & 2 MIC's / test i perform on the material.
Is there a way by which i can have multiple link between batch characteristic & MIC and manage this link via some user exit or
do you have some suggestions on how to handle this business requirement?
Regards
TOM

You only need one inspection characteristic.
You don't indicate in your process how or when these two types of inspection happen.
You can create a source inspection lot with the tests the you use to record the vendor results on.
Then when you receive the material, you have an 01 inspection lot created for recording your actual results.
The second set UD on the 01 lot will over write the batch record results from the first source inspection.
If you have one inspection lot that is created at goods receipt, use two operations. Operation 10 has the vendor tests. Operation 20 has the in-house testing. When the UD is made the test results from the last operation will be written to the batch record.
Craig

Batch Characteristic not updating with result for linked MIC

Hi,
I have created a MIC and linked to a batch characteristic i.e. potency and included the characteristic in a specific batch class. This MIC is part of the inspection plan for a certain material.
If I generate a lot of origin 01 and 09 for the material and record a result for the MIC and apply a UD, the batch characteristic is not updated with the result recorded in the batch master record..
If I generate a lot origin 89 for the same material, when the result is recorded for the MIC and apply a UD the batch characteristic is updated with the mic value in the batch master record.
Can you help regards?

Ok. I am a little bit further.
I put a trace (ST05) on the result recording and I find a difference between 4.7 and ECC6.0.
In ECC6.0 I've an deletion in table "AUSP". This deletion isn't performed in the 4.7 system.
Hope that this can help to solve my problem.
Regards,
René
@ Mayank
Above, all the master data and customizing is mentioned to transfer the result to the batch classification
Edited by: Rene Fuhner on Jul 30, 2010 7:03 PM

IPhone 6 External Mic not working for Siri/Dictation

I am finding that the external mic on my iPhone 6 works for phone calls and voice memos, but does not work for Siri/Dictation. When I plug in the earbuds, they work for everything (including Siri/Dictation).
Was chatting to Apple support who had me reset all settings. I thought that worked, but realized that after a reset, Siri is off and I was talking to "Voice control" (which works). When I turned Siri back on, it does not work.
I have two questions for the community to see if you can help:
1- I have been assuming this must be a software problem since the mic does work for non-Siri access. But is that true? Is there a hardware component that Siri depends on which could be faulty here?
2- If it is software, what action should I try to address it? I have done a reset all settings already and that did not help.
Doug

Hi, everyone. I talked to Apple Genius at Apple Store last week, she said it should be a software issue and I needed to reset my iphone 6 plus as a new device and I can not use the backup restore from my iCloud, it was because the microphone bug or glitch can be in the backup also. Ok, followed her advice, erased all contents and set my iphone as a new device , the microphone worked for an hour, but went bad again. I used "voice memo" app from Apple to test the microphone. It is the best tool since it doesn't involve any provider's network and it doesn't need another person's phone to listen and test. If you can hear your voice recording clearly, then the mic works. I tested it 3-4 times a day for a few days now, half of the time the mic doesn't work. So, set as a new device isn't working. The issue is intermittent and it comes and goes as it likes, so very annoying. I carry my Apple EarPods with me in these past few days ust in case I need to make important phone calls. Will need to go back to Apple Genius this weekend for sure. Will give update after the weekend.

CWBQM on MIC

Similar Messages

Maybe you are looking for