CWLMS-1.2-SR-K9

Hello,
Iam preparing to install CWLMS-1.2, according to the
CDOne5thEdWinInstallandSetup.pdf on the CD i should use Win2000Server with Sp2. I would like to install the Package on Win2000Server with Sp3, do some body know any problems with the Installation on Win2000Server with Sp3.
Thanks
Ali

The latest CW2K bundle (CS 2.2) supports Windows SP3. But should be OK with this version.

Similar Messages

Issues with CWLMS 3.2 Install Server 2008

Hi,
I am trying to install CWLMS 3.2 on Server 2008 SP2 - I have installed succesfully but when i try and login it asks for username and password which i fill out correctly and then just hangs and does nothing, it seems to be an issue with port 443 or redirection.
Please help
Thanks
Rich

Sounds like CSCtb17186 http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtb17186
that Joe mentioned in https://supportforums.cisco.com/message/676256#676256

Active/Standby Configuration in CWLMS

Hi,
I have 2 LMS Server's in my LAN. I want 1 server will be Master & the other will be in Standby mode.
Whether, such type of configuration is possible in CWLMS??
I am using CWLMS version: 3.1
Rgds,
Partha

I don't think that LMS has a feature for HA installation.
You will find that in the document
http://www.cisco.com/en/US/prod/collateral/netmgtsw/ps6504/ps6528/ps2425/ps7196/prod_white_paper0900aecd80695cad.pdf
on page 20 in chapter "7.1 Redundant-Server Scenario".
But there is an solution with two identical servers, one as master and the other as slave.
Details you will find in the document.

CWLMS-4.0 vSphere Client 5.0.0

Good morning
I have a problem with my CWLMS-4.0 in combination with the vSphere Client 5.0.0.
In the overview a server is shown as Windows 2008 Server but it is a Red Hat Linux.
This issue produced some problems.... How is it possible to change it to Red Hat Linux?
Many greets
Mike

Hello Vinod
The difference is Cisco Prime LMS. As you can see in the screen the device is shown as Windows 2008 Server. In Cisco Prime Infrastructure it is correct implemented as Red Hat Linux.
Its also the current Version of LMS running with 4.2.5
Attached you will find the screens of the effected device.
Thanks in advance
Mike

CWLMS DFM root cause functionality.

According to the CWLMS Deployment Guide 3.0:
"Device Fault Manager provides the ability to monitor device faults in real-time and determine the root cause by correlating device-level fault conditions."
Can anyone explain in a little more detail exactly how this works, and how the "root cause" event and it's "symptom events" are displayed in the DFM?
Does it use the same "Codebook Correlation Technology" that is used in EMC Smarts?

just a comment...
DFM ... it has its own story .....
DFM 1.2 was really good (at least compared to DFM 2.0+). It has had a GUI where you did see correlated alarms in different colors on a split window and a good classification of the alarm. DFM 2.0+ is an awful castrated version of the original. If you look at the code DFM has its own mechanism to discover the network to know the topology. It does not need any other application to know this - but it is not used in LMS. It has mechanisms to correlate events - but they are not implemented.
I would like to know who made the decission to code something like this (and I would realy like to discuss it...)
1) try to reach EVERY IP address a device has with ICMP (BY DEFAULT !!)
and need a couple of time to implement a script to remove this again
2) REMOVE the feature to start a script based on an event, - just allow email and trap-forwarding
[if anbody was successfull in registering the script notifier again it would be great to share this information...]
3) show up these very special alarmIDs in the GUI and provide them on the device center GUI (Device Alert Identifier) without making it a link to the "Alerts and Activities Detail" Page
4) do not provide the posibility to add a specific trap as a customized event
5) do not show detailed information in "Detailed Device View" if a device is in an unknown state - this could be interesting for troubleshooting..
... and there are a few more ...

Issues with CWLMS 3.2 RME 4.3.1 cannot fetch vlan.dat off a VSS and 4510.

Hi,
I am having a major headache with RME collecting the vlan.dat from a VSS and 4510, the device and credentials work fine, however when archiving the config i get partial success due to vlan failing. You can see in the IC_Services log that it attempts to TFTP the .dat file off which it fails with, i believe vlan fetch is only supported by SSH or telnet
when you do a CDA test both devices pass on everything..

managed to log on and please see below, tftp on one device works fine but from the 4510 or vss still fails
GRA_CHUB_CR_01#copy cat4000_flash: tftp:
Source filename []? vlan.dat
Address or name of remote host []? 172.20.220.10
Destination filename [vlan.dat]?
%Error opening tftp://172.20.220.10/vlan.dat (Timed out)
GRA_CHUB_CR_01#
DAR_R002_AS_01#
DAR_R002_AS_01#copy flash:vlan.dat tftp:
Address or name of remote host []? 172.20.220.10
Destination filename [vlan.dat]?
616 bytes copied in 0.009 secs (68444 bytes/sec)
DAR_R002_AS_01#

Inventory management problem with WS-C2950-24 on CWLMS 4.0

Hi Joe,
I have a problem with inventory management wiht 2950- 24 switches on which I am not able to capture inventory as well as the configurations. The IOS version is 121-22.EA13 and featureset is i6k2l2q4-mz. However, when I troubleshoot it, all the transport protocols (Telnet, ssh, tftp etc) shows success.
Thanks,
Best Regards // Rajiv

Inventory uses snmp to communicate to device. Please check you device has snmp configured and LMS has correct SNMP RO credentials added to it.
Please try to do a manual snmpwalk from LMS server (using device centre > tools) and see the walk succeeds.
Then again try to run the inventory from LMS server on this perticular device and if it fails, share the failure result/screenshot etc details. NMSROOT/log/ic_server.log as well.
-Thanks

CWLMS 3.1 : CiscoView of Cisco 7606-S Router

Hi Friend,
I am facing some issue with CiscoView of 7606-S router.
Please find the attachment for more details.
In figure, The RED Marked LAN port appears GREEN when viewed through CiscoWorks but physically on Cisco 7606-S router, no such port exists at all.
Also besides this, we have 3 fiber ports and 2 RJ-45 port on Cisco router visible through CiscoView, but physically on Cisco router 2 Fiber and 2 RJ-45 port are present.
first fiber port is up and connected whereas when seen through CiscoWorks, it shows 3rd fiber port as green.

you can not display your 7600 in ciscoview, the most probably reason is that a device package is needed to do this. do the following:
1. Download the device package from the link (Cat6000IOS.cv50.v29-1.zip, Cat6000IOS.cv50.v29-1.readme)
http://www.cisco.com/cgi-bin/apps/vwplan/cvresult.cgi?product_class=Routers&product=Internet+Router+7600+IOS&application=All+Versions
2. Go to Common Services > Software Center > Device Update, then select CiscoView > click on 'Check for updates' > select 'Enter Server Path' and enter the path where you downloaded the files > continue the instructions to
install it.
This will probably need to restart ciscoworks to apply the changes.

I have ordered CWLMS 2.2 for the customer, I want to ask a question.

I have ordered LMS 2.2 which support only Windows 2000 Server, but the customer want to install LMS on Windows 2003, then I install LMS 2.5 evaluation and I order the Minor upgrade ver sion from 2.x to version 2.5 ... I fear that I have to install LMS 2.2 on Windows 2000 Server only and just upgrade to LMS 2.5 and I cannot use LMS upgrade license to verify LMS 2.5

If you have both sets of CDs, then you may simply install LMS 2.5 and then when that is done perform the validation (using the older version).
In other words, you don't need to install LMS 2.2 first.

CWLMS server messages

I have CWLMS3.1 installed on Solaris Server.
And when I login the server, I get this messages (see attach)
how can I eliminate that appear this messages all the time!
Thanks very much in advance!
Best regards!

Thanks very much!
Here the file:
root@cwoss # more syslog.conf
#ident "@(#)syslog.conf        1.5     98/12/14 SMI"   /* SunOS 5.0 */
# Copyright (c) 1991-1998 by Sun Microsystems, Inc.
# All rights reserved.
# syslog configuration file.
# This file is processed by m4 so be careful to quote (`') names
# that match m4 reserved words. Also, within ifdef's, arguments
# containing commas must be quoted.
*.err;kern.notice;auth.notice                   /dev/sysmsg
*.err;kern.debug;daemon.notice;mail.crit        /var/adm/messages
*.alert;kern.err;daemon.err                     operator
*.alert                                         root
*.emerg                                         *
# if a non-loghost machine chooses to have authentication messages
# sent to the loghost machine, un-comment out the following line:
#auth.notice                    ifdef(`LOGHOST', /var/log/authlog, @loghost)
mail.debug                      ifdef(`LOGHOST', /var/log/syslog, @loghost)
# non-loghost machines will use the following lines to cause "user"
# log messages to be logged locally.
ifdef(`LOGHOST', ,
user.err                                        /dev/sysmsg
user.err                                        /var/adm/messages
user.alert                                      `root, operator'
user.emerg                                      *
# Added for Cisco Syslog Analyzer (begin)
local7.info             /var/log/syslog_info
# Added for Cisco Syslog Analyzer (end)
#BEGIN CSCOmd - DO NOT EDIT THESE COMMENTS OR CONTENTS CONTAINED WITHIN - local1
1
local1.emerg;local1.alert;local1.crit;local1.err;local1.warning;local1.notice;lo
cal1.info;local1.debug /var/adm/CSCOpx/log/dmgtd.log
#END CSCOmd DO NOT EDIT BEFORE THIS LINE 1
root@cwoss #
root@cwoss #

TACACS+ login CWLMS Prime 4.1

Good day,
I changed a setting on my LMS server to use TACACS+ however i did not slect the option that local users can login to the server
Is there a way that i can change it back to this?
When i try logging into my LMS server it denies the access.
Attached please find screen grab of TACACS+
The software is installed on a virtaul machine running Linux
Thanks
Jaques

you can run the perl script ResetLoginModule.pl as discribed here:
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/4.1/install/guide/dmg.html#wp1189216,
(if the screenshot you provided is not just an example you should be able to login as user "admin" at least when disabling the connection to your TACACS server)

CWLMS 4.0.1 & etherchannels

Hello!
I have Cisco LMS 4.0.1. After adding devices to DCR, I open Topology services-Layer 2 View and realised that I can't see etherchannels at all. In my network all links between switches are etherchannels, but on the network graph I see only one link between 2 switches instead 2 links at least. If I do righ-click on my 3750 switch and select Port attributes I see that isChannel and isTrunk values is false, but as I said all links between switches are etherchannels and trunks. Do you have any ideas what to do?

I restarted the server again and the same error happened. I checked DCRServer process and it was in the state "Failed to run" with processRC -14. I started it manually -it took very long time to start- and ran the discovery again but still the same error "Error in communicating with DCR Server. DCR Server may be down. Please start the DCR Server and then start discovery."!!!!
Attached the DCRServer log file.

Some Devices are not showing up at all in the Discovery reports

Hi all,
The first time I ran the CS device discovery I got 50 reachable devices. I scheduled the Device Discovery to be run every week. I added more subnets to the discovery but unfortunately the last discovery shows only 31 devices from the first discovered devices (50). I checked the DCR and there is only 44 devices out of the 50!
My question is:
Should not the scheduled Device Discovery discovers all devices -the previously discovered ones and the new ones-?
Why the rest of the devices are not showing up at all in the discovery reports (neither reachable nor unreachable) although all of them are pingable and responding to the snmpwalk tool from the CWLMS server.
Your kindly respond is highly appreciated.
Thanks in advance.

I ran the discovery again with the same settings after enabling debugging and I checked the following log files:
1. in the ngdiscovery.log I found a lot of errors all about Duplicate IpAddress example:
ERROR [DeviceManager : EvalTask-DiscoveryThreadPool-06 addNewDevice] : Duplicate IpAddress (127.0.0.51) found in addNewDevice().Device 1 ip = 10.8.113.29 , id1 = 127.0.0.51*F1COR.xyz.com*.1.3.6.1.4.1.9.1.283, Device 2 ip = 10.8.113.106 , id2 = 127.0.0.51*LCD.xyz.com*.1.3.6.1.4.1.9.1.283
ERROR [DeviceManager : EvalTask-DiscoveryThreadPool-08 updateDevice] : Duplicate IpAddress (127.0.0.51) found in updateDevice().Device 1 ip = 10.8.113.93 , id1 = 127.0.0.51*UDS.xyz.com*.1.3.6.1.4.1.9.1.283, Device 2 ip = 10.8.113.73 , id2 = 127.0.0.51*F2COR.xyz.com*.1.3.6.1.4.1.9.1.283
ERROR [DeviceManager : EvalTask-DiscoveryThreadPool-09 addNewDevice] : Duplicate IpAddress (10.8.113.42) found in addNewDevice().Device 1 ip = 10.8.113.42 , id1 = null, Device 2 ip = 10.8.113.86 , id2 = 10.8.118.251*OPS.xyz.sa*.1.3.6.1.4.1.9.1.501
2. in the CSDiscovery.log:
Error while changing the permission of the file C:\PROGRA~1\CSCOpx\objects\csdiscovery\1348\DiscoveryStatusObj
I checked the file and the casusers has a Modify permission
My Question is:
1. what is the meaning of those output exactly?
2. If CWLMS found duplicatedd IP address how it works in terms of (ignoring, updating existing devices, Adding the new devices, ... etc)
Many thanks for your help.

Problem restoring LMS 2.6 data to LMS 4.0

Hello,
I'm trying to migrate from LMS 2.6 on a Windows 2003 server to LMS 4.0 on Windows 2008 R2.
Two things I'll note here which might help future people attempting to use the LMS 4.0 backup/restore scripts as detailed in the migration document:
1) Make sure nobody has installed cygwin on the server before you run the backup scripts. If they have, remove it and the reg keys.
2) On the target server make sure to run the restore script CMD session using runas or disable UAC on Windows 2008 or the restore scripts will fail
My next problem I can't get past. I've been running the restore since yesterday morning and it still hasn't finished. It hasn't moved from 40% complete migrating the IPM data but in the last 24 hours it has eaten up 6Gb more RAM.
C:\Users\zadmkovesa>e:\sw\CSCOpx\bin\perl.exe e:\Sw\CSCOpx\bin\restorebackup.pl
-d e:\lmsbackup\ -t e:\lmsbackup\temp
Restore started at : 2011/03/15 11:21:12
Please see 'E:\Sw\CSCOpx\log\restorebackup.log' for status.
     USER ID is ..................................... : zadmkovesa
     OS of the backup archive is..................... : Windows
     WARNING: The temp directory e:\lmsbackup\temp\tempBackupData is not empty.
              An earlier instance of restore operation might have been interrupt
ed before completion.
              If you proceed with the restore operation, this directory and its
sub directories will be deleted.
              Do you want to continue? (y-continue or n-quit, y/n)?y
     Generation to be restored is ................... : 0
     Backup taken from............................... : e:\lmsbackup\
     Common Services version in the backup data is... : 3.0.6
     Common Services is installed in................. : E:\Sw\CSCOpx
     The temp folder for this restore program........ : e:\lmsbackup\temp\tempBa
ckupData
     Applications installed on this machine ......... : [Common Services][Campus
Manager][Resource Manager Essentials][Device Fault Manager][cvw][cwlms][cwporta
l][ipm][upm]
     Applications in the backup archive ............. : [Common Services][Campus
Manager][Resource Manager Essentials][Device Fault Manager][cvw][ipm]
     WARNING: The list of applications installed on this CiscoWorks server does
not match the list of
              applications in the backup archive. If you restore data from this
backup archive,it may
              cause problems in the CiscoWorks applications.
              Do you want to continue the restore operation? (y-continue or n-q
uit, y/n)?y
     Applications to be restored are................. : [Common Services] [Campu
s Manager] [Resource Manager Essentials] [Device Fault Manager] [cvw] [ipm]
     Available disk space in NMSROOT................. : 237023900 Kb
     Required disk space in NMSROOT.................. : 38857544 Kb
     (The temp and NMSROOT are on same device, therefore this required disk spac
e includes temp space)
Copying the backup files to the temporary location [e:\lmsbackup\temp\tempBack
upData]
preRestore of [Common Services] has started.
preRestore of [Common Services] has completed.
preRestore of [Campus Manager] has started.
preRestore of [Campus Manager] has completed.
preRestore of [Resource Manager Essentials] has started.
preRestore of [Resource Manager Essentials] has completed.
preRestore of [Device Fault Manager] has started.
preRestore of [Device Fault Manager] has completed.
preRestore of [cvw] has started.
preRestore of [cvw] has completed.
preRestore of [ipm] has started.
Not all data from IPM 2.6 will be migrated to LMS 4.0. For information on the d
ata that is migrated, see the "Migrating Data From LMS 2.6 or 2.6 SP1" section i
n the "Migrating Data to CiscoWorks LAN Management Solution 4.0" chapter in the
LMS4.0 Installation Guide for details. Do you want to continue[Y/N]:[Y]y
Do you want the IPM 2.6 collectors present in the backup to be DELETED from the
source routers [Y/N]:[Y]n
preRestore of [ipm] has completed.
doRestore of [Common Services] has started.
          License check started.
             WARNING: The license details in the server are different from the b
ackup data.
                      After restoring, please check the license available in the
server.
             WARNING: Your current license count is lower than your earlier lice
nse count.
                      If you restore the data now, devices that exceed the curre
nt licence count
                      will be moved to Suspended state.
          License check completed.
          Restoring certificate.
             WARNING: Cannot evaluate the hostname, hence the certificate
                      may be from this host or another host.
                      [ Certificate not overwritten ]
          Restored Certificate.
          Restoring Common Services database.
          Restored Common Services database.
          Restoring CMIC data.
          Restored CMIC data.
          Restoring CMC data.
          Restored CMC data.
          Restoring Security Settings.
                INFO:
                Backup Mode is ACS. In LMS we are not supporing ACS for AAA.
                Setting Login Mode to CiscoWorks Local.
          Restored Security Settings.
          Restoring DCR data.
          Restored DCR data.
          Restoring Certificate key store.
          Restored Certificate key store.
          Restoring JAAS configuration.
          Restored JAAS configuration.
          JRM Job Migration started.
          JRM job Migration done.
doRestore of [Common Services] has completed.
doRestore of [Campus Manager] has started.
doRestore of [Campus Manager] has completed.
doRestore of [Resource Manager Essentials] has started.
10% of RME Restore completed
30% of RME Restore completed
50% of RME Restore completed
70% of RME Restore completed
100% of RME Restore completed
doRestore of [Resource Manager Essentials] has completed.
doRestore of [Device Fault Manager] has started.
10% of DFM Restore completed
30% of DFM Restore completed
50% of DFM Restore completed
80% of DFM Restore completed
Going to modify Eight PM report
Modified Sucessfully Eight PM report
100% of DFM Restore completed
doRestore of [Device Fault Manager] has completed.
doRestore of [cvw] has started.
doRestore of [cvw] has completed.
doRestore of [ipm] has started.
10% of IPM migration completed
20% of IPM migration completed
30% of IPM migration completed
40% of IPM migration completed
>>>
The restore log is more than 8Mb in size so I won't upload it unless someone really wants to see it. Here is a snip from the end of it showing no clues I can make sense of:
INFO: Getting message
INFO: Connect the database dsn=ipmdb
INFO: Connected the Database
INFO: Command Executed
INFO: Connecting the Database ipmdb
INFO: Company=Cisco Systems;Application=NMTG;Signature=010fa55157edb8e14d818eb4fe3db41447146f1571g32125eb777a87cbf8b29a954f559d4221b792ff8
INFO: Preparing AUTH cmd
INFO: AUTH Executed
INFO: AUTH cmd finished
INFO: Stopping the Database engine ipmdb
INFO: E:\Sw\CSCOpx/objects/db/conf/ConfigureDB.LOCK released for the future operations...
INFO: File not exists.[Tue Mar 15 13:17:30 2011] Successfully registered the database with DM
[Tue Mar 15 13:17:30 2011] Successfully configured IPMDB database !..
10% of IPM migration completed
INFO: Start changing password for database 'ipm'...
    Starting database engine ipmEng
INFO: New userinfo updated into database successfully.
    Stopping database engine ipmEng
SQL Anywhere Command File Hiding Utility Version 10.0.1.4051
INFO: Password changed in odbc template file for database 'ipm'.
INFO: Password changed for ODBC registry 'ipm'.
INFO: Password changed for Property file E:\Sw\CSCOpx\lib\classpath\com\cisco\nm\cmf\dbservice2\DBServer.properties.
INFO: Database password successfully changed.
INFO: Process created
INFO: Started the Database engine : ipmEng Retry 0
INFO: Started the Database engine : ipmEng Retry 1
INFO: Started the Database engine : ipmEng Retry 2
INFO: Started the Database engine : ipmEng Retry 3
INFO: Started the Database engine : ipmEng Retry 4
INFO: Getting message
INFO: Connect the database DSN=ipm
INFO: Connected the Database
INFO: Command Executed
INFO: File not exists.[Tue Mar 15 13:18:08 2011] Updated IPM 2.6 DB password into IPM 5.0 DB
20% of IPM migration completed
The CiscoWorks Daemon Manager service is starting.
The CiscoWorks Daemon Manager service was started successfully.
[Tue Mar 15 13:18:12 2011] Waiting for all daemons to start completely...
[Tue Mar 15 13:20:12 2011] Successfully stated daemon manager
30% of IPM migration completed
[Tue Mar 15 13:20:12 2011] Checking if IPM Process is up and running
INFO:Daemon Manager is processing other tasks in the queue.Please try again later.
[Tue Mar 15 13:25:12 2011] Process IPMProcess is not running or never started
[Tue Mar 15 13:25:12 2011] Will check after 60 seconds
INFO:Daemon Manager is processing other tasks in the queue.Please try again later.
[Tue Mar 15 13:31:12 2011] Process IPMProcess is not running or never started
[Tue Mar 15 13:31:12 2011] Will check after 60 seconds
[Tue Mar 15 13:34:54 2011] Process IPMProcess is running normally
[Tue Mar 15 13:34:54 2011] Let's proceed further..
40% of IPM migration completed
[Tue Mar 15 13:39:54 2011] delete flag is 0
[Tue Mar 15 13:39:54 2011] Data passed to MigrMain : 2.6 5.0 E:\Sw\CSCOpx E:\Sw\CSCOpx e:\lmsbackup\temp\tempBackupData Migration e:\lmsbackup\temp\tempBackupData 0
Should I just wait? Is this something that might take days if I've got a lot of IPM data or is it broken? I don't really care about keeping IPM data so could I do something to complete the data migration for everything else? Any advice appreciated.
regards,
Aaron

The restore can take a long time if you have a lot of data. The problem is the database needs to be completely unloaded and reloaded to convert from ASA 9 to ASA 10. However, if you do not care about IPM data, and you still have LMS 2.6 running, you can take a new LMS backup not using the wrapper.pl script (this will keep IPM from being backed up).

10Mb .swf compilation - OutOfMemoryError: Java heap space...

When I try to compile my 10Mb .swf with the "-Xmx1024m" setting in pfi.bat I getting:
Exception in thread "main" java.lang.OutOfMemoryError: Java heap space
      at java.util.Arrays.copyOf(Unknown Source)
      at java.io.ByteArrayOutputStream.write(Unknown Source)
      at java.io.OutputStream.write(Unknown Source)
      at adobe.abc.GlobalOptimizer.emitAbc(GlobalOptimizer.java:2670)
      at adobe.abc.GlobalOptimizer.emit(GlobalOptimizer.java:2594)
      at adobe.abc.LLVMEmitter.optimizeABCs(LLVMEmitter.java:320)
      at adobe.abc.LLVMEmitter.generateBitcode(LLVMEmitter.java:172)
      at com.adobe.air.ipa.AOTCompiler.convertAbcToLlvmBitcode(AOTCompiler.java:329)
      at com.adobe.air.ipa.AOTCompiler.GenerateMacBinary(AOTCompiler.java:600)
      at com.adobe.air.ipa.IPAOutputStream.compileRootSwf(IPAOutputStream.java:196)
      at com.adobe.air.ipa.IPAOutputStream.finalizeSig(IPAOutputStream.java:366)
      at com.adobe.air.ADTPackager.createPackage(ADTPackager.java:65)
      at com.adobe.air.ipa.IPAPackager.createPackage(IPAPackager.java:165)
      at com.adobe.air.ADTEntrypoint.parseArgsAndGo(ADTEntrypoint.java:132)
      at com.adobe.air.ipa.PFI.parseArgsAndGo(PFI.java:152)
      at com.adobe.air.ADTEntrypoint.run(ADTEntrypoint.java:68)
      at com.adobe.air.ipa.PFI.main(PFI.java:112)
When I increase try jave heap from "-Xmx1024" to "-Xmx1200" or more memory for jave heap I stable getting:
# A fatal error has been detected by the Java Runtime Environment:
# Internal Error (0xe06d7363), pid=3796, tid=3048
# JRE version: 6.0_16-b01
# Java VM: Java HotSpot(TM) Client VM (14.2-b01 mixed mode windows-x86 )
# Problematic frame:
# C [kernel32.dll+0x12afb]
# An error report file with more information is saved as:
# C:\svn\xxx\components\xxx\output\hs_err_pid3796.log
# If you would like to submit a bug report, please visit:
#   http://java.sun.com/webapps/bugreport/crash.jsp
# The crash happened outside the Java Virtual Machine in native code.
# See problematic frame for where to report the bug.
Compilation process looks like this:
Have anybody idea how can I compile my .swf? Thanks.

Hi Joseph,
I'm having the same problem with CWLMS 4.0.1. But I didn't find this file heap.properties in the
/opt/CSCOpx/MDc/tomcat/webapps/rme/WEB-INF/classes/com/cisco/nm/rmeng/cli/framework/
Do you know where I customize this parameter in that version?
Thanks,
Patricia Oliveira

CWLMS-1.2-SR-K9

Similar Messages

Maybe you are looking for