CWMS 2.0 Apple IOS Problem error code 100202 and ANdroid not

Hi,
I have a problem with external invitation for Apple devices. I always get the error code 100202. Although I have imported the signed certificate on the Webex Meeting Server and exported again from the Webex Server for the IOS Device , I still get the error. On Android, it goes without problems, although I have not played a certificate. Wildcard certificates are not allowed with at our site. Is that really a certificate Problem?
The Webex Server is the latest 2.0 Release 302 N and IOS Devices 7.1.1.
THX for your feedback
P.s. it also possible to change the speaking announcement from webex and change against his own? is that supported? I have found nothing about that
THX

Hi,
I can see you are experiencing an issue with an iOS 7.1.1 device and SSL certs installed on CWMS 2.0 MR3.
Who is Certification Authority that signed the CWMS certificate?
Do you use SAN (Subject Alternative Names) or Wildcard cert?
When implementing the SSL cert to CWMS, did you also incorporate Intermediate SSL Certs into the SSl Cert file uploaded to CWMS?
Did you generate Certificate Signing Request (CSR) on the CWMS, or somewhere else? (I just want to know if the private key is generated on CWMS or you need to import that as well with your certificate)
Once I have this information, I will be able to provide you with the next steps.
As for the customizing audio prompts, this is not supported in CWMS at this time. I advise you to talk to your Cisco Account Team and express the need for such a feature so they can bring it to Product Management for the review.
-Dejan

Similar Messages

APPLE *****! Getting Error Code -6722 and will not hard reset, please help

Why can't Apple build a network product that is as easy to setup and configure as EVERYONE else?
I decided to cave in and get the Airport Extreme, knowing how bad Apple executes on anything other than a MacBook. And sure enough I was not let down.
I plugged in the Airport Extreme and went through the efforts to configure it. While configuring it, I did not use the manual setup (which I should have). It only asked for the DNS settings and nothing else like the gateway and network mask from my ISP provider. Now, it is hosed.
1. I am using the Airport Utility software that came with the product.
2. I have held the reset button in and watched the sudden flashing of the amber lights.
3. I have power cycled the devide
AND NOTHING! Argh - why did I spend so much money on such a piece of crap.
I would be so grateful if anyone can help me. This is so frustrating.
DELL Latitude 820 Windows XP Pro Intel Core 2 Duo with 4GB Ram

you can check the hardware capability of the treo 650 especially the charger port and the battery itself.
if you know someone that has a 650 or another charger that is the same as you, try to borrow it and test your phone if it will charge unto it.
you can also try another battery if it will resolve the issue. if none of those things can help it fix the issue, then it's time for you to have the phone repaired.
Post relates to: Treo 680 (Unlocked GSM)

HT201210 No matter what i Do it comes up with error code 9 and wil not even find the Iphone 3GS 16GB ....What to do ??

No matter what i Do it comes up with error code 9 and wil not even find the Iphone 3GS 16GB ....What to do ??
The Home and Sleep buttom does only promt the Connect to itunes...
Have closed down anti V and is admin and so on.....
Regards Martin

Hello mftoby,
Error 9 occurs when the device unexpectedly loses its USB connection with iTunes.
This issue can usually be resolved by performing USB troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.
iOS: Troubleshooting USB connection
http://support.apple.com/kb/TS1286
iTunes: Troubleshooting security software issues
http://support.apple.com/kb/TS3125
Note: For best results and the fastest resolution, it may be best to try the restore on a different computer. This will help isolate if it is an issue with the device or the computer itself.
Thanks,
Matt M.

Phone stuck in recovery mode error code 40 and would not restore

My Iphone 3GS stuck in recovery mode error code 40 and would not restore.I was with AT & T.Please help!

Hi there...
Actually I was stuck with this situation yesterday. Here is what I did to overcome this issue: I hope it helps.
To start with, here are few things to you should make sure of:
1- You have the latest version of iTunes. You may try to uninstall and reinstall iTunes.
2-Restart your Windows.
If still no luck, try editing the Hosts file, here is how;
1- click on RUN then copy and paste the following:
notepad c:\windows\system32\drivers\etc\hosts
2- look for gs.apple.com
3- if there are numbers infront of it just delete them or just type # before the numbers.
4- Save the file and try restoring again.
Note: you should have administror access to edit the Hostes file.
put your iphone in DFU mode before restoring.
I hope this helps. It did for me

Keep getting error code 1 and will not download

keep getting error code 1 and can not dowload adobe cc

Here's some advice from adobe
Error: "Failed to install" | Creative Cloud Desktop

Buning Problems Error Code 4450 and 4280...what should I do????

I tried to lower the speed as I read in other postings and it did not work. What now.
Microsoft Windows XP Professional Service Pack 2 (Build 2600)
Hewlett-Packard HP Pavilion dv2000 (RG408UA#ABA)
iTunes 7.1.1.5
CD Driver 2.0.6.1
CD Driver DLL 2.0.6.2
LowerFilters: PxHelp20 (2.0.0.0),
UpperFilters: GEARAspiWDM (2.0.6.1),
Current user is an administrator.
Video Display Information:
NVIDIA GeForce Go 6150
Connected Device Information:
DiskDrive, ST9120821AS, Bus Type ATA, Bus Address [0,0]
DiskDrive, Ricoh Memory Stick Disk Device, Bus Type UNKNOWN
CDROM, TSSTcorp CD/DVDW TS-L632L, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
E: TSSTcorp CD/DVDW TS-L632L, Rev HP16
Drive is empty.
Writing CD text is turned on in the preferences. If you're having problems burning CDs, try turning this preference off.
The last failed audio CD burn had error code 4280(0x000010b8). It happened on drive E: TSSTcorp CD/DVDW TS-L632L on CDR media at speed 4X.

I just tried to reduce the speed the drive it self and I still got error code 4280...I don't know wuts going on because I can't burn anything in windows media player either.
that's not an especially good sign. i get worried about 4280s because they can sometimes indicate a hardware problem in the drive. (for example, belladonna started throwing them at me when her Lite-On drive started to die.)
we'd better check to see if you're properly up to date before checking on that possibility though.
i had a look at your downloads page at HP. (thank you kindly for including your model number in your system information.)
Software & Driver downloads: HP Pavilion dv2125nr Notebook PC (XP)
there's nothing there by way of new firmware for the drive that is throwing the 4280. but there are a few other downloads of interest.
check to see if that HP Notebook System BIOS update is applicable to your particular configuration of dv2125nr, and if so, make sure you're up to date.
check to see if that new AMD Processor Update for Microsoft Windows XP is applicable to your configuration, and if so make sure you're up to date with it.
check to see if your NVIDIA GeForce Go 6150 Graphics Driver is up to date.
once you're satisfied that you're up to date, do you still get the 4280?

Please help have error code 1013 and can not restore iphone 3gs

i have tried every thing i can find to restore 3gs and no luck
tried 4 different computers and 3 cables and all the usb ports on the computers
i have even tried the gs.apple.com fix and no go.. am at a loss on what to do next any help
would be great thank you all

Every time I restore I get a different code last 2 times I have gotten code 1002
And 1013 a few times.
Error 1002 usually means a hardware problem. If you've tried several known working cables, the problem is likely in thte phone itself.
+"Error 23, 28, 29, 40, 1002, 1011, 1012, 1014, 1611: These errors may indicate a hardware issue with your device. Follow the steps in this article and also attempt to restore while connected with a known-good 30-pin Dock Connector cable, computer, and network to isolate this issue to the device. If the MAC address is missing or the IMEI is the default value (00 499901 064000 0), this can also confirm a hardware issue."+

Can not restore my iPhone 4 with error code 1611 and can not activate it to work too.

My iPhone 4 can not be activated and when I tried to restore it with itune there is error code 1611 about hardware issue.If anyone ever had the same problem please help.

Have you googled to see what the error code means? Perhaps that will give you a clue as to how to solve your problem.

TS1567 WHen I try to connect my iphone 4 to iTunes, I keep getting an error code 0x800000A and it won't recongize my iphone. Any suggestions? I have deleted everything and reloaded itunes, but the error code contines to pop up.

Any suggestions to fix an error code 0x800000A, and itunes not recongizing my iphone 4? I deleted iTunes and reloaded it with no changes. What can I do?

In the course of your troubleshooting to date, have you worked through the following document?
iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting to a Windows PC

My ipod classic keeps showing error code 1439 and says its corrupted and nothing on the site that it says to do is working has anyone else had the problem

my ipod classic 160 gb keeps showing error code 1439 and says it is corrupted and i have done everything the article on it says to do and still reads the same thing. has anyone else had the same problem if so what can i do to fix it. the ipod is only 2 months old

If it is under warranty, bring it in to Apple Store, most of our suggestions, comes from the Apple support site..
Besides Restoring the iPod, there are winsocks which have conflict with iTunes, perhaps, disable those plugins and disconnect the Internet and stop antivirus, while you are Restoring or Syncing the iPod.

Can anyone tell me what apple hardware test error code apple hardware 4MOT/4/40000002: Exhaust-1153 or 1209 means? I am running a MacBook Pro.

Can anyone tell me what apple hardware test error code apple hardware 4MOT/4/40000002: Exhaust-1153 or 1209 means? I am running a MacBook Pro

The motor on the exhaust fan has failed or is failing.

What are the meanings of Apple Hardware Test error codes 4m0t/4/40000003:hdd-1300 and 4m0t/4/40000003:hdd-1308?

what are the meanings of Apple Hardware Test error codes 4m0t/4/40000003:hdd-1300 and 4m0t/4/40000003:hdd-1308?

Thanks - Even though I'm years out of warranty I got chat help from Apple (I said they should help me since the codes aren't published.) We covered three different questions, and although I didn't get a specific decoding of the error code, I got confirmation of what other comments here imply - it might have helped that I indicated I'd already been here - and useful links to how to do back ups, including to CD(s). (I don't have a lot of data on this computer yet)
Now I need to figure out how to decide how hot-to-the-touch is "too hot" for the metal frame at the top of the iMac to decide whether I'm getting adequate fan performance or insufficient. While chatting I initially reported it was cool at the bottom and warm at the top. Apple hadn't asked, but their response prompted me to feel it again, and I'd say the top was hot, not warm - I updated but Apple didn't comment further except to conclude after addressing the other questions that I should take it in for further assessment - don't really want to bother with that.

I bought the APP Sasol Birds. 146MB of the 147,5MB downloaded without any problem. The download stopped and first the error code 3259 and later the error code 8012 appeared. Can someone help? I want the download to be completed. Thank you. Pieter Strobos

I bought the APP Sasol Birds. 146MB of the 147,5MB downloaded without any problem. The download stopped and first the error code 3259 and later the error code 8012 appeared. Can someone help? I want the download to be completed. Thank you. Pieter Strobos

Maybe your firewall or security software are preventing the download from finishing. You could try disabling them until you finish the download

How to Fix BlackBerry App World Identity installation fail problem: (Error Code 80003)

Hello To all you kickass BlackBerry users!
I have compiled a web site that addresses the issue if the ID Verification problem (Error Code 80003) when attempting to use AppWorld,
It seems that it is mainly a Vodacom issue in South Africa, but it should also work with other service providers that have a similar problem. RIM and Vodacom are aware of it and are looking into a solution.. In the mean time you can fix your problem step by step here: http://www.blackberryapps.byethost17.com/
Regards
BB Solutions
Feel free to send a friend request (pin on the site) to contact me personally for any queries you may have.

Blackberry Identity sometimes gives a problem to download using BIS.
you can go to manage connections, switch mobile network off, find a wifi hotspot, try updating the identity using wifi, or enter your network provider's apn settings in menu > options > advanced options > tcp/ip, enable the apn, enter service provider apn username and password, save hard reset , and download identity, just remember to undo the changes afterwards.

Problem by startup Oracle 8i!!And Error Code: ORA 01034-ORACLE not available!!

Hello all!
I need urgent help!!
I'm trying to start Oracle 8.1.6 i on Solaris 8. But there are lot of error:
1. During initialising the database with dbassist, the error Code Error Codes: ORA 01034-"ORACLE not available" and ORA-01012-"not logged on" were shown.
2. I'm trying to start Oracle 8i on Sun Solaris 8 by typing svrmgrl-connect interal-startup. But the following was shown on by screen:
passau% svrmgrl
Oracle Server Manager Release 3.1.6.0.0 - Production
Copyright (c) 1997, 1999, Oracle Corporation. All Rights Reserved.
Oracle8i Enterprise Edition Release 8.1.6.0.0 - Production
With the Partitioning option
JServer Release 8.1.6.0.0 - Production
SVRMGR> connect internal
Connected.
SVRMGR> startup
LRM-00109: could not open parameter file '?/dbs/[email protected]'
ORA-01078: failure in processing system parameters
Please help me!!
My e-mail Adress: [email protected]

I am pretty sure this has to do with the SGA..
what you may have to do is adjust you
system file
Here the values for /etc/system file: for more info look under
Oracle specific parameters (documetation) set shmsys:shminfo_shmmax=122496729 set semsys:seminfo_semmap=150 set semsys:seminfo_semopm=100 set semsys:seminfo_semvmx=12767 set semsys:seminfo_semmni=200 set semsys:seminfo_semmns=200 set semsys:seminfo_semmsl=200 set semsys:seminfo_semmnu=200 set semsys:seminfo_semume=100 set shmsys:shminfo_shmmin=100 set shmsys:shminfo_shmmni=100 set shmsys:shminfo_shmseg=100
good luck
[email protected]
null

CWMS 2.0 Apple IOS Problem error code 100202 and ANdroid not

Similar Messages

Maybe you are looking for