CWMS 2.5 stuck at WebEx logo while booting

Hi,
Just deployed a CWMS 2.5 OVF template.used 250 user admin option. When I power the VM on, the booting process is stuck at the webex logo. Does not go further. Have ensured that NTP is setup correctly on the ESxi.
Attaching the console screenshot
Any suggestions?
Thanks

Hi,
Did you use vCenter to deploy the OVA file or you connected vSphere client to ESXi host directly?
You must use vCenter for deployment of CWMS.
Additionally, CWMS VMs must be deployed on a dedicated ESXi host per system requirements, which doesn't seem to be the case per the screen shot.
Here is some useful documentation that can help you in setting this up:
http://www.cisco.com/c/en/us/td/docs/collaboration/CWMS/2_5/Administration_Guide/Administration_Guide.html
http://www.cisco.com/c/en/us/td/docs/collaboration/CWMS/2_5/Planning_Guide/Planning_Guide.html
I hope this will help.
-Dejan

Similar Messages

My Black Berry Z10 is not starting- Stuck at logo while booting..

My mobile BBZ10 STL-100 is stuk at logo while booting. Its not completing the process to open/on the mobile.
Is there any way to fix this issue?
Can any of you help me, how to resolve this issue.
Thanks in Advance.

You can try loading the OS again, using
Upgrading OS10 devices using Autoloader
You will need to know the exact model STL100-x , found on the white sticker under your battery.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

S930 stuck at Lenovo screen while boot up.

My S930 stuck at lenovo screen while boot up.
I tried to leave the phone while waiting for it to boot until the battery drain out.
Then charged till full , try to boot again and it still stuck at the same lenovo screen..
What to do? How to reset / factory default ?
Please help. TQ

Issue :- G500 Lenovo laptop screen gets stuck at lenovo screen and does not allow to do any thing alternatively need to power off laptop.
I am also having this same problem occasionally. In that case if my screen stuck at lenovo screen then I turn off my laptop, After while when I turn it on then problem go off. But today same method did not help me, finally I removed my batter for a while then plugged it again which again resolved the issue.
I purchased my G500 lenovo laptop 4 or 5 months ago , it had been working fine for first 3 months but after it I encountered with this probelm.
I updated my bios with latest available version but that also not helped me
My concern is that why this problem is occuring occasionally. Request you to share valuable steps and guide us to get rid off from this problem.
Thanks and Regards
Ashok Dewan

Apple tv freezes at apple logo while booting

My apple tv was working pretty well, then I unplugged it ti connect my iPad via Hdmi and when I back to connect my apple tv it freezes at apple logo while booting it can stay like that for hours

I don't even know if this will work...buy a USB to micro USB cable and connect the AppleTV to your computer and try doing a firmware restore. Here are the instructions from the manual:
If Apple TV still doesn’t respond:
Disconnect the power and HDMI cables from Apple TV.
Connect one end of a micro USB cable (sold separately) to the back of Apple TV, and the other end to your computer.
Open iTunes on your computer, select Apple TV in the Source list, and then click Restore.
The problem is, I don't know if your computer will be able to talk to the AppleTV if it can't even boot. So this procedure may not work. Good luck!

My Mac Pro Stucks at Apple logo while starting up.

Hi.I have had my MacPro for a year.when i turn it on, it stucks on apple logo and nothing else.if you can solve my problem help me please.

what i am saying is when i just press the power button the Apple logo comes up.while happening this,a load strip shows on the bottom of apple logo.it loads something on the same place for couple seconds and still the same.the gray circle line load indicator which is usual to see while turning on shows up too.the operating system does not start up at all and stuck on Apple logo.couple nights ago, i was testing a wrong article about hardwares and i did not know that the article was wrong.i turned of and on the system 4 or 5 times in a row.the sixth time i turned it on the operating system started up but the finder was not getting open.i waited a long time to see if it is gonna solve the problem by itself but it did not.the seventh time i turned it on as a restart the issue i described happens which is stucking on Apple logo.the is a CD in the disk driver also.that was the whole things about the problem.so sorry for annoying you and appreciate your help.

My Macbook is stuck on Apple logo when booting up!

Hello,
I have a Macbook Core 2 Duo that is stuck on apple logo, And I already tried inserting the mac OS x leopard disc but when I insert the disc and power up the Macbook it shows this picture down below. So if you have any answers that could solve my problem please comment down below Thanks!!!!

OS X- About kernel panics
OS X- How to log a kernel panic
Visit The XLab FAQs and read the FAQ on diagnosing kernel panics.
Note that panics at startup usually signal a hardware failure.
Question (?) Mark, Blinking Folder, or Gray Screen at Startup
These are related but not identical issues. Their causes are outlined in Intel-based Mac- Startup sequence and error codes, symbols. Solutions may be found in:
A flashing question mark appears when you start your Mac
Mac OS X- Gray screen appears during startup
In most cases the problems may be caused by:
Problem with the computer's PRAM - See Resetting your Mac's PRAM and NVRAM.
Boot drive's directory has been corrupted - Repair with Disk Utility.
Critical system files are damaged or deleted - Reinstall OS X.
The disk drive is physically non-functional - Replace the hard drive.
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
The main difference if you are using Lion or Mountain Lion is that you must first boot from the Recovery HD:
Boot From The Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstall Snow Leopard Without Erasing The drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Reinstalling Lion/Mountain Lion Without Erasing The Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

Freezing On Apple Logo While Booting Up

Hello, my name is Joseph. Purchased my Macbook Pro 13" mid 2012 in September so I have had it around two and a half months. Love it. Last night I turned it on and it then became frozen at the apple logo and spinning wheel (booting up).
I contacted support today and I believe his name was Brett was very helpful and polite, unfortunately he says I will need to re-install the OS. Thankfully I should be able to grab my important files and folders.
Out of curiosity though while going through troubleshooting steps such as trying to boot in safe mode (didn't work), Disk Utility options (didn't work), and having the background operations appear while booting I noticed an error that neither of us could identify and was repeating.
vnode validate compressed file Type4 error: 22
Can anyone explain this? I have only found one instance of this before.

Corrupt system file.

My old mac powerbook g4 wont boot up, it wont show apple logo and spinner aswell just stuck on grey screen while booting please help me

i have a old powerbook g4 which i usally use to store some photos and to listen music. the battery of my powerbook is completly dead so i used to use my powerbook using charger adapter so whenever my power cuts down my laptop will be shutdown.
one day i had just bootedup my powerbook and some date notificateion poped up so i press enter and suddenly my power went off and laptop shuted down. and next time when i tried to boot its stuck at grey screen , i even cant reach the apple logo and spinner. please helppp me :!!!!!!!!!!!!!!!

Resetting PRAM and NVRAM is not working
and i cann't boot it on safemode holding shift button and while holding option or c button at startup i can only see three things 1 is refresh button, 2 macintosh HD with X under it, 3 arrow forward button please help me

IPod touch stuck at apple logo (while rebooting)

my ipod touch 4th generation has got stuck while switching it on . And when the apple logo came it got stuck . I tried connecting it to itunes , it recognised but still it was stuck . it has been 4-5 hours since it was stuck. i would like to get some help!

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Snow leopard in Mountain lion partition stuck on apple logo when booting. How to boot?

Hi, Im running Mountain Lion on an early 2011 macbook pro, I know it can run Snow leopard so I partitioned my HD and installed snow leopard from another mac (It was the only way to install it because ML blocked the SL install dvd). If I boot from the snow leopard partition in my macbook pro it gets stuck on the gray/apple logo screen. I can run it in HD mode into another mac so I know SL is functional, what can I do so it boots in my computer?

You have to make sure Snow Leopard is updated to 10.6.8 with the Combo update downloaded from the Apple download site. The problem you are having is either the version of SL isn't updated to 10.6.8 or it wasn't updated to tht version usingthe Combo update. The normal Software Update version only has drivers for the hardware it is being installed on and the Combo update has and installs all drivers for al Apple hardware.

Hangs on white screen with Apple logo while booting

I can not get my Mac Pro Quad Core to boot up. It gets to the plain white screen with the Apple logo and will not go any further. I shut down the computer and unplugged it before a bad thunderstorm. Since then I haven't gotten it to boot up just once.

The Genius Bar said it was a "blip" in the OS. I just love the technical terms Apple uses. They did a repair install of Tiger. All of my software and documents seemed to have remain safely on my computer but none of my hardware was. I had to reinstall all related software for my hardware (Apogee Ensemble and wireless keyboard and mouse).
Hope this helps you Yogafreak. I could have reinstalled the OS myself but I had already carried the heavy mac pro all through the mall so I let the pros handle it. I would have preferred some service through the phone that didn't cost $50 for 30 days.

Mirror front G4 stuck on apple logo on boot ?

Hi all, Friends just called to say his G4 won't boot.. it gets to the grey screen with apple logo an goes no further. He's tried re-booting. Unplugged everything .. HD etc.. still no joy. Any ideas? HD failed? logic board?
many thanks.
Simon

I should have said to try using Disk Utility to repair your startup disk (hard drive) as shown in Dr.Smokes repair thread first. Then try those other links.
Do everything in his link once a month and you'll keep your Mac running smooth.
Cheers!
DALE

Apple Logo Stucks while boot up song is playing

So, since I found the problem, the music of the booting is hearing. BUT the screen is stuck with the Apple Logo and the "beach circle" frozen. Any problems with that?
Please help !!!
Thank you

Try using Disk Utility to do a Disk Repair, as shown in this link, while booted up on your install disk.
You could have some directory corruption. Let us know what errors Disk Utility reports and if DU was able to repair them. Disk Utility's Disk Repair is not perfect and may not find or repair all directory issues. A stronger utility may be required to finish the job.
After that Repair Permissions.
No need to report Permissions errors....we all get them.
DALE

TS3694 hi i recently updated into ios 7.0.4 now i want to fully restore my ipad to resell but when i restore it it got stuck with apple logo and progress bar with 45% completed as firware file is downloaded using ipad 4 wifi itunes 11.3.8

hi i rescently updated my ipad 4 in ios 7.0.4 and for resell purpose i want to restore my ipad via itunes but it got stuck at apple logo and progress bar of 45% completed i tried it 50 times but it stuck on that exact point for hours i cant able to restore it and had no errors it just like freezes at one point i also uses dfu mode but got stuck at same problem using windows 7 32 bits itunes 11.3.8 ipad 4 wifi please help

My iPhone 5 wouldn't start after I turned it off a few minutes after writing this. It went into recovery mode and I had no choice but to connect to iTunes on PC and restore.
I restored to factory setting first, just to validate my phone was okay. For a second consecutive iOS update, the iPhone 5 did not update smoothly while connected to PC and iTunes - I had to retry two times before the progress bar for the update showed. (The exact same problem with the restart occured when I updated to 7.0.4.)
The good news is that I was ultimately able to restore the iPhone 5 to factory settings while running iOS 7.0.6. I did have a backup from about a month ago lying around and was able to successfully restore with that as well, so the damage done is almost negligible since I had my contacts, notes, mail, etc. backed up to iCloud.
Once I completed both restores, the sync with iTunes worked fine.

Toshiba Satellite p75-A7200 stuck on toshiba logo after bios change

My Toshiba Satellite p75-A7200 is stuck on toshiba logo after bios change.
entered bios fine changes from UEFI to CSM boot and now i cannot enter bios or boot past toshiba logo.
Ive tried F2 tapping and holding while powering up the laptop(tried every Fkey,DEL,ESC, with and without FN key)
cannot re-enter bios.
Also i tried to run the bios update cd created multiple 1.50 1.40 even 1.00, it doesnt seem to read any media.
i tried holding C, FN+C and f and just about every key on the keyboard to get something to work. i had dvd as top of boot priority for a while now so i shouldnt have to try f12 or holding C before boot but i tried . it doesnt seem to read any media
i tried windows 8 install cd, Ubuntu, centos, nothing goes past toshiba logo and no errors, i dont get the non bootable device error so its seems to not be reading the dvd. (dvd does spin and make read noises) im trying to find my usb floppy drive to try a floppy version but it acts like its not reading any media.
I also pulled the HDD and all usb devices to make the dvd the only media available and with the HDD out it spins then toshiba logo then black screen with solid white horizontal curser on top left of screen.(only happens when hdd out)
is there some type of key combination that will force a bios update or a crisis recovery mode for bios.
I also Pulled the battery for 2 solid days(battery,cmos battery, and power supply and held power button for about 10 mins while watching tx to make sure the thing was drained before the 2 day sit with no power at all.
this happened the second i changed from UEFI to CSM boot so its not a motherboard problem or anything like that because all was well before this setting change.
I already pulled the HDD and backed it up to another drive and swapped it to elimiate that.
any ideas on a secret key combo to force a bios read from dvd or usb or anythng.
or another combo that im just missing to enter bios after CSM boot.
UPDATE
to do a crisis recovery on this laptop
1 get a usb stick and format it in fat or fat32
2 download "7zip" and install it if you dont have it.
3 download bios from toshiba website.
4 run the installer for bios but dont choose and option just close it we just want to extract the files to the location normally c:\splnvxxx where xxx is the version number like 150
5 goto the installed locaion "c:\splnv150" or whatever number.
6. find file os2014273a_150 or something similar. it will be an application, it will end in version number _150, and it will also have a disc image file of the same name. but we want the app.
7. right click on it and you should have an option 7zip then extract
once extracted there is a folder now archesxxxxxx_bios_v150_win
8 copy the bios file located in archesxxxxxblahblah/X64/BIOS.fd , BIOS.fd is the bios and just copy that to a BLANK usb thumb drive that was formatted with fat or fat32.
9. put usb into your satellite and unplug the power from it.
10 holding FN + ESC key together plug the power back in and press power button.
11. release keys FN and ESC if all is right it will have the power button and led on from blink abut every 1 second while it searches for the bios. once its done it will reboot and you should be good to go.
if it keeps cycling with the power button then the bios is named wrong or something is not right with the usb. try reformatting it again and make sure that the bios file is the ONLY thing on the drive.

Ok a little research and digging into the bios exe downloaded from toshiba shows this has INSYDE BIOS witch should have a recovery process wich i prepared a usb stick with just the bios.fd on it found some post around toshiba forums with different models using win +B or Fn + F but neither of these worked for me to force bios update
anyone with this model know the key combo to force recovery

CWMS 2.5 stuck at WebEx logo while booting

Similar Messages

Maybe you are looking for