CWSI 2.4; Could not reconnect to osagent

Hi,
the cwsi-start failes with the message: "could not reconnect to osagent". The Installation contains the following Software: WindowsNT4-Server (SP6a), HP Network-Node-Manager 6.2, RME2.2 / CWSI 2.4. The information from osfind.exe is: osagent works on port 14000. But the default port should be 42342. I had no success with the change of the registry-values from 42342 to 14000.
What can I do?
Regards.
Volker Janusch

yesterday did I reinitdb. But there was the same failure again. Now I restarted the deamon manager - and the CWSI works. After an reboot occures the same failure again. If I restrart the deamon manager: It works. I will put in operation again this customer-server with this workaround. If you have any other ideas ..... :-))
I know, this an obsolete Version, but the customer don`t want to upgrade at this time.
Thanks.

Similar Messages

Could not reconnect all network drives

I have several drives mapped on different Windows 7 boxes in my office. Just about every time I boot up one of these systems I receive the message "Could not reconnect all network drives" in the system tray.
I should note that merely clicking the drive inside Windows Explorer will restore the connection. I store the server logon credentials in Control Panel / Credential Manager then just map the network paths to drive letters. I'm pretty sure the
problem doesn't stem from any credentials type of problem though, because I have the exact same situation when connecting to only open shares. I have noticed that a couple applications will restore the connection themselves when trying to access information
on a share. Most applications however will give an error and time out trying to access the shares unless I go and manually click each drive letter in Explorer. For instance if I place Firefox bookmarks on a share and open Firefox, Firefox will
display no bookmarks until I click the drive in Explorer and reopen Firefox.
One thing I can do to fix the problem is hard code my IP address. I never receive the message if a computer has fixed IP address. My router hands out IPs on the LAN dynamically, so I switch it to another router and tried a using a Linux based dhcp-server
as well. Neither fixed the problem.
I'm a long time user of batch files and realize I could place use one as a band aid for this issue, but I don't want to go that route.

Hello marstech,
According to the research, the mapped drive lost issue may be caused by the several possible reasons:
Possible reason1. The problematic client doesn't reconnect to the target share at logon.
Please follow the steps to re-configure the mapped driver on the client and then check if the issue will re-occur.
Steps:
a. Open "My Computer"
b. Click on "Tools" and then select "Map Network Driver"
c. input the \\ipaddressofserver\sharename to give the path of the share
d. Check "Reconnect at logon"
e. Drive gets mapped
f. Double click on the drive to check.
Possible Reason 2. Antivirus software or Windows Firewall may block the SMB protocol on clients.
Please check if there is any Antivirus software and the Windows Firewall is enabled on the problematic client. If so, please disable them to check if the issue can be resolved.
Possible Reason3. Fast Logon Optimization is enabled on the clients.
The fast logon feature may affect the display and drive letter assignment of a mapped network drive. As a result, the drive may have been mapped; however, the user on client cannot see it in Windows Explorer. He may recognize it as a failed network drive mapping.
This is the reason why we usually suggest you to disable fast logon on the clients via a GPO, and please check if the mapped network drive will be occur under this circumstance.
Please also configure the following group policy setting to disable Fast Logon Optimization to see if the issue still exists on the problematic clients.
Computer Configuration\Administrative Templates\System\Logon\Always wait for the network at computer startup and logon
When this policy is enabled, a Windows XP client behaves in the same manner as a Windows 2000 client at both system startup and at user logon.
Please note: As this is a computer configuration, please run "Gpupdate /force" and then reboot the problematic clients to make it take into effect.
For more information about Fast Logon Optimization feature, please check the following KB article.
305293 Description of the Windows XP Professional Fast Logon Optimization feature
http://support.microsoft.com/?id=305293
831998 Mapped network drive shows no drive letter or will not allow you to create new long-named files or folders
http://support.microsoft.com/kb/831998
297684 Mapped Drive Connection to Network Share May Be Lost
http://support.microsoft.com/kb/297684
If the issue still exists on the problematic clients, please also try adding the following registry subkey on the problematic client to check it works.
Steps:
a. Click Start, click Run, type REGEDIT, and then click OK.
b. Locate and click the following registry subkey:
HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\NetCache
c. Click Edit, point to New, and then click DWORD Value.
d. Type SilentForcedAutoReconnect , and then press ENTER to name the value.
e. Double-click SilentForcedAutoReconnect .
f. In the Value data box, type 1, and then click OK.
Please feel free to let me know if you have any concen.
Hope the information can be helpful for you.
Thanks and Regards
Scorpio_Milo
MCTS: Windows Vista | Exchange Server 2007
MCITP: Enterprise Support Technician
MCITP: Server & Enterprise Administrator
Microsoft Infrastructure Consultant
Enterprise Service: Solution Architect
Microsoft Storage Team - File Cabinet Blog
My Blog

[SOLVED] Ardour - could not reconnect to audio/MIDI engine

I have a problem with Ardour:
when I am tryng to create a session it is telling me that it "could not reconnect to audio/MIDI engine.
I don't really know where to go from here.. Can anyone please help me with this?
Let me know if there is any information I should post to help solving this?
Thanks in advance!
Last edited by AlexanderHolmgaard (2015-02-07 16:29:56)

Have you add your user to audio group?

Could not reconnect iCloud

I used Apple ID do sign in to reconnect iCloud after I tapped reset all setting but was wrong button, I have been tried many time with no Successful
Please help. what can I do, I have not received any email and been lost all my contact.
Thank You.

Hello lordx101,
Thank you for providing the details of the issue you are experiencing when trying to log into iCloud.com. The following article provides steps to isolate and troubleshoot the issue you described:
iCloud: Troubleshooting web browser issues with iCloud.com
http://support.apple.com/kb/TS4050
Thank you for using Apple Support Communities.
Best,
Sheila M.

The internet connection was lost, when reconnected could not reconnect ipad to internet message Safari could not find server

I am trying to reconnect my wife's ipad to the internet. Keep getting message Safri cannot find server. Can anyone help

Hello Tatiana,
It sounds like you're not able to access the Internet on your wife's iPad using Wi-Fi. I found a couple of resources that will help troubleshoot Wi-Fi issues on the iPhone:
Joining and troubleshooting Wi-Fi networks
https://www.apple.com/support/ipad/assistant/wifi/
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Thank you for posting in the Apple Support Communities.
Best,
Sheila M.

Could not reconnect to iCloud server on laptop, despite correct password and username

I cannot connect to iCloud.com on my laptop. It keeps on saying that it cannot connect to the server.
I am using a laptop, and I know my username and password.
Any ideas on how to log back into iCloud again?
I tried on other computers, and I could log into iCloud. It is just my laptop that iCloud is having trouble connecting to.

Hello lordx101,
Thank you for providing the details of the issue you are experiencing when trying to log into iCloud.com. The following article provides steps to isolate and troubleshoot the issue you described:
iCloud: Troubleshooting web browser issues with iCloud.com
http://support.apple.com/kb/TS4050
Thank you for using Apple Support Communities.
Best,
Sheila M.

Broker does not reconnect after db restart

Hi,
we have a enhanced cluster with two brokers running on solaris 10. the ha store is a oracle 10 db. after a db downtime of 10 minutes the cluster could not reconnect to the ha store. we have in the broker logs the following SQLExceptions. it was impossible to use any imqcmd. we had to terminate the two brokers. after starting them everything was running fine, no more exceptions. why do the brokers not reconnect after a db downtime?
regards
ricky
com.sun.messaging.jmq.jmsserver.util.BrokerException: [B4062]: Error storing information associated with Transaction 691059032992373504 : data may be lost if the
broker exits before the transaction completed
at com.sun.messaging.jmq.jmsserver.data.TransactionList.addTransactionID(TransactionList.java:414)
at com.sun.messaging.jmq.jmsserver.data.TransactionList.addTransactionID(TransactionList.java:368)
at com.sun.messaging.jmq.jmsserver.data.handlers.TransactionHandler.doStart(TransactionHandler.java:1986)
at com.sun.messaging.jmq.jmsserver.data.handlers.TransactionHandler.handle(TransactionHandler.java:520)
at com.sun.messaging.jmq.jmsserver.data.PacketRouter.handleMessage(PacketRouter.java:181)
at com.sun.messaging.jmq.jmsserver.service.imq.IMQIPConnection.readData(IMQIPConnection.java:1489)
at com.sun.messaging.jmq.jmsserver.service.imq.IMQIPConnection.process(IMQIPConnection.java:644)
at com.sun.messaging.jmq.jmsserver.service.imq.OperationRunnable.process(OperationRunnable.java:170)
at com.sun.messaging.jmq.jmsserver.util.pool.BasicRunnable.run(BasicRunnable.java:493)
at java.lang.Thread.run(Thread.java:619)
Caused by: com.sun.messaging.jmq.jmsserver.util.BrokerException: [B4019]: Failed to persist transaction 691059032992373504
at com.sun.messaging.jmq.jmsserver.persist.jdbc.TransactionDAOImpl.insert(TransactionDAOImpl.java:418)
at com.sun.messaging.jmq.jmsserver.persist.jdbc.TransactionDAOImpl.insert(TransactionDAOImpl.java:329)
at com.sun.messaging.jmq.jmsserver.persist.jdbc.JDBCStore.storeTransaction(JDBCStore.java:1423)
at com.sun.messaging.jmq.jmsserver.data.TransactionList.addTransactionID(TransactionList.java:411)
... 9 more
Caused by: java.sql.SQLException: [INSERT INTO MQTXN41Cavai1mq01 ( ID, TYPE, STATE, AUTO_ROLLBACK, XID, TXN_STATE, TXN_HOME_BROKER, TXN_BROKERS, STORE_SESSION_ID,
EXPIRED_TS, ACCESSED_TS) VALUES ( ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ? )]: Closed Connection
at com.sun.messaging.jmq.jmsserver.persist.jdbc.DBManager.wrapSQLException(DBManager.java:863)
at com.sun.messaging.jmq.jmsserver.persist.jdbc.TransactionDAOImpl.insert(TransactionDAOImpl.java:413)
... 12 more

Hi Tom,
near the end of the pasted exception it says: Closed Connection.
i think this is the cause of the failure. this is expected because the oracle data store is down. The problem is, that after the db was back online. the broker continued to throw the same exception. i expect, that the broker throws away the closed connections and reopens new ones to continue his work.
regards
ricky

Error message says "an ipod has been detected but it could not be identified. We've disconnected the ipod and reconnected it but it hasn't worked.

error message says "an ipod has been detected but it could not be identified. We've disconnected the ipod and reconnected it but it hasn't worked.

If the iPod was originally formated to your computer, restart your computer. If not - How to use your iPod to move your music to a new computer

In Windows 7, iTunes gives error message "An iPhone has been detected, but it could not be identified properly. Please disconnect and reconnect the phonon then try again.

In Windows 7, iTunes gives error message "An iPhone has been detected, but it could not be identified properly. Please disconnect and reconnect the phonon then try again."
I have a iphone 4S. It has been activated on Win 7 computer and synced. But overnight this meassage reappears.

I have same error except that i get it even when my phone is not connected.

What do i do when Itunes says "Itunes could not load data from sync services reconnect or try again later

Hi, just recently when I attemted synced my ipod touch 5th generation, i got a message saying
"Itunes could not load data from sync services reconnect or try again later
I am running the latest version on itunes (not quiet sure which specific one)
I am running ios 6.1 my ipod is not jail broken
don't know what to do
I then cleard the message and my ipod showed up and began to sync
however it is staying at the backing up stage for 12 hours
Not sure what to do help!

Try:
iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert
"load data class"

Could not save the document to the repository for the following reason: [repo_proxy 30] DocumentFacade::uploadBlob - Query execute has failed : Error occurred while attempting to reconnect to CMS : Not a valid logon token. (FWB 00003) (hr=#0x80042a70) (WI

Hi, getting Could not save the document to the repository for the following reason: [repo_proxy 30] DocumentFacade::uploadBlob - Query execute has failed : Error occurred while attempting to reconnect to CMS : Not a valid logon token. (FWB 00003) (hr=#0x80042a70) (WIS 30567) amongst lots of other errors when scheduling.
I was logged in as administrator and attempting to schedule a webi document to my self using the email option.
thanks in advance

Hi Trinath,
Could you please confirm if you could save a new report as well or not; or is it specific to scheduling.
If you are unable to save a report also then I think this is due to the path of the Input File Repository Server or its temporary directory are not pointing to the same path, and their locations are set to 2 different hard drives
BOXI3.1 Server must use the same hard drive (local or network share) for the Input File Repository Server and its temporary directory.
- Shahnawaz

An iPod has been detected, but it could not be identified properly. Please disonnect and reconnect the iPod, then try again.

I have uninstalled and reinstalled itunes and I am still getting this error message. An iPod has been detected, but it could not be identified properly. Please disonnect and reconnect the iPod, then try again.

Hey there gentzdo,
Welcome to Apple Support Communities.
This article provides information and troubleshooting tips that'll resolve most issues like the one that you've described, where your iPod nano isn't identified properly by iTunes.
iPod nano: Error message saying that iPod could not be identified properly - Apple Support
Cheers,
-Jason

"An ipod has been detected, but it could not be identified properly. Please disconnect an reconnect the iPod, then try again. An unknown error occured (2005)."

"An ipod has been detected, but it could not be identified properly. Please disconnect an reconnect the iPod, then try again. An unknown error occured (2005)."
What does this mean? I have an iPod shuffle 4th gen but its not detected in itunes... it can only be seen in the device manager, but I can't see it on the task bar. Can anyone please help me?

I have same error except that i get it even when my phone is not connected.

Upgraded to 11.1.4.62. Now iTunes is saying "An iPod has been detected, but could not be identified properly. Disconnect then reconnect ..." I removed iTunes and reinstalled. I stopped and started the service. I reset the iPod. When I put it in disk

I upgraded to 11.1.14.62 this morning. Not iTunes is saying "An iPod had been detected but could not be identified properly". I unlugged/replugged in. I reset the iPod, I removed iTunes and reinstalled. I'ver tried three different cables.
When I put the iPod in disk mode it shows up briefly as a disk then goes away.
Any ideas?

Hi there - I've spoken with Apple and here is their response (worked for me). You need to uninstall not only iTunes, but also (in this order):
1) iTunes
2) Apple Software Update
3) Apple Mobile Device Support
4) Bonjour
5) Apple Application Support
Then you restart your computer.
Then you install the latest version of iTunes (which will reinstall all those things you uninstalled).
Then you restart your computer again.
Mine is working perfectly again now.
I hope it works for you,
Carmen.

I'm having trouble updating my iphone 4 since i updated to 4.3.3 i can't update it anymore. right now when i connect it to my itunes, itunes freezes for about 5 minutes then says something like "could not load sync service" any ideas on what i shud do?

I'm having trouble updating my iphone 4 since i updated to 4.3.3 i can't update it anymore. initially itunes would let me go so far as downloadin the new software then an error poped up as soon as the download finished, and now when i connect it to my itunes, itunes freezes for about 5 minutes then says something like "could not load sync service, reconnect or try again later" any ideas on what i shud do?

Did you try to connect in recovery mode? iPhone and iPod touch: Unable to restore

CWSI 2.4; Could not reconnect to osagent

Similar Messages

Maybe you are looking for