CX_FQDN runtime error

Hisdn team,
I am getting the following runtime error while testing my webdynpro application.
I try one time to solve it by adding a new parameters in RZ10
icm/host_name_full = $(SAPLOCALHOST).domain.ext
but itI dump all my SAPserver when I restart.
now I get back my profi and my sapserver, but till have same probleme.
can any one help me work together to solve it!!!
Thanks
Adil
Edited by: adil chikhaoui on Dec 23, 2010 4:41 AM

Hi jagdal,
it looks like work for few seconde and after that another error pop up:
The following error text was processed in the system DM0 : Lower-Level Node with Name MAINVIEW.sflight_node Does Not Exist Iꯂ
When activate m web dynpro everythings i good
if any one can how me a way I appreciate
The following error text was processed in the system DM0 : Lower-Level Node with Name MAINVIEW.sflight_node Does Not Exist Iꯂ
The error occurred on the application server sapserver_DM0_01 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: GET_CHILD_NODE_INTERNAL of program CL_WDR_CONTEXT_ELEMENT========CP
Method: IF_WD_CONTEXT_ELEMENT~GET_CHILD_NODE of program CL_WDR_CONTEXT_ELEMENT========CP
Method: IF_WD_CONTEXT_NODE~GET_CHILD_NODE of program CL_WDR_CONTEXT_NODE_VAL=======CP
Method: WDDOINIT of program /1BCWDY/2WK3XWKOCLBKF7E5TWGR==CP
Method: IF_WDR_VIEW_DELEGATE~WD_DO_INIT of program /1BCWDY/2WK3XWKOCLBKF7E5TWGR==CP
Method: DO_INIT of program CL_WDR_DELEGATING_VIEW========CP
Method: INIT_CONTROLLER of program CL_WDR_CONTROLLER=============CP
Method: INIT_CONTROLLER of program CL_WDR_VIEW===================CP
Method: INIT of program CL_WDR_CONTROLLER=============CP
Method: GET_VIEW of program CL_WDR_VIEW_MANAGER===========CP

Similar Messages

CX_FQDN runtime error in WEBDYNPRO

Hello Gurus, I have a problem with a WebDynpro. The issue is as follows
I set the parameters in RZ10:
SAPLOCALHOST = sapexprod
SAPLOCALHOSTFULL = sapexprod.grupolarepublica.com.pe
icm / host_name_full = sapexprod.grupolarepublica.com.pe
When I try to access from within the network, asks me username / password and enter Okei
URL: http://sapexprod.grupolarepublica.com.pe:8001/sap/bc/webdynpro/sap/zwdxx_prueba1
But when I try to log off the network, asks me username / password but I get the dump:
The URL: http://200.37.36.37:8001/sap/bc/webdynpro/sap/zwdxx_prueba1
The URL http://200.37.36.37:8001/sap/bc/webdynpro/sap/zwdxx_prueba1 call has been canceled due to an error.
Note
The system has processed the following text error PRO: Die URL enthält keine vollständig Domainangabe (200.37.36.37 200.37.36.37 statt. ).
The error occurred in the application server sapexprod_PRO_00 and the work process 0.
The class of cancellation was: RABAX_STATE
The ABAP call hierarchy was:
Method: CHECK of program CX_FQDN ======================= CP
Method: STARTUP_CHECKS of program CL_WDR_UCF ==================== CP
Method: CONSTRUCTOR of program CL_WDR_UCF ==================== CP
Method: CREATE of program CL_WDR_UCF ==================== CP
Method: HANDLE_REQUEST of program CL_WDR_CLIENT_ABSTRACT_HTTP === CP
Method: IF_HTTP_EXTENSION ~ HANDLE_REQUEST of program CL_WDR_MAIN_TASK ============== CP
Method: EXECUTE_REQUEST_FROM_MEMORY of program CL_HTTP_SERVER ================ CP
Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
Module:% HTTPSTART of program SAPMHTTP
Please I really need your help Gurus, Thank you.
GC

I had the same problem..
I set a external debugger in the method "CHECK" of CX_FQDN where it hits the dump.
Turns out SAP does not allow IP address (not Sure why..may be there is a note for this..I'll post if I find anything)
Check out the logic..
METHOD check.
DATA: lv_host    TYPE string,
        lv_port    TYPE string. "#EC NEEDED
lv_host = request->get_header_field( name = 'host' ).
IF lv_host NA '.' OR lv_host CO '0123456789.:'.
    IF NOT lv_host CS 'localhost'.
      SPLIT lv_host AT ':' INTO lv_host lv_port.
      RAISE EXCEPTION TYPE cx_fqdn
        EXPORTING host   = lv_host
                  domain = '.<domain>.<ext>'. "#EC NOTEXT recommend security group
    ENDIF.
ENDIF.
ENDMETHOD.
Sorry..Just found a note "1403326".. SAP makes it official that we cannot use IP.
Here is what the note says.
Symptom
You start a Web Dynpro ABAP application and immediately receive an error message due to the exception: CX_FQDN.
Other terms
Fully qualified domain name
Reason and Prerequisites
You can start Web Dynpro ABAP applications only if
the name of the server with a fully qualified domain name (FQDN) was specified in the URL. The specification of an IP address or a host name without a domain is not possible.
The requirements of a fully qualified domain name are described in Note 654982.
Solution
Start Web Dynpro ABAP applications only with a suitable server name.
Edited by: Sudharshan on Aug 1, 2011 3:39 AM

Webdynpro application runtime error CX_FQDN

Hi experts,
I am encountering following error when running a sample webdynpor application from SE80. I have included details of my Hosts file entries and profile parameter in the details below.
My SAP system is installed on my desktop computer as a standalone on a wrkgroup. Name of the host is 'ecc6'.
Step by step instructions preferably with some example will be greatly appreciated.
Thanks in advance. AP
What has happened?
The URL http://ecc6:8006/sap/bc/webdynpro/sap/z_tutorial_1 was not called due to an error.
Note
The following error text was processed in the system ECC : Die URL enthält keine vollständige Domainangabe (ecc6 statt ecc6.).
The error occurred on the application server ecc6_ECC_06 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
ST22 dump is:
Runtime Errors         UNCAUGHT_EXCEPTION
Exception              CX_FQDN
Error analysis
    An exception occurred which is explained in detail below.
    The exception, which is assigned to class 'CX_FQDN', was not caught and
    therefore caused a runtime error.
    The reason for the exception is:
    Die URL enthält keine vollständige Domainangabe (ecc6 statt
    ecc6.).
System environment
    SAP-Release 700
    Application server... "ecc6"
    Network address...... "192.168.100.1"
    Operating system..... "Windows NT"
    Release.............. "5.2"
    Hardware type........ "4x Intel 801686"
    Character length.... 16 Bits
    Pointer length....... 32 Bits
    Work process number.. 0
    Shortdump setting.... "full"
    Database server... "ECC6"
    Database type..... "ORACLE"
    Database name..... "ECC"
    Database user ID.. "SAPSR3"
User and Transaction
    Client.............. 001
    User................ "SAPUSER"
    Language Key........ "E"
    Transaction......... " "
    Program............. "CX_FQDN=======================CP"
    Screen.............. "SAPMHTTP 0010"
    Screen Line......... 2
    Information on Caller ofr "HTTP" Connection:
    Plug-in Type.......... "HTTP"
    Caller IP............. "192.168.100.1"
    Caller Port........... 8006
    Universal Resource Id. "/sap/bc/webdynpro/sap/z_tutorial_1"
Information on where terminated
    Termination occurred in the ABAP program "CX_FQDN=======================CP" -
     in "CHECK".
    The main program was "SAPMHTTP ".
    In the source code you have the termination point in line 10
    of the (Include) program "CX_FQDN=======================CM002".
Entries in C:WINDOWSsystem32driversetchosts
127.0.0.1                 localhost
192.168.100.1     ecc6
Instance Profile in SAP transaction RZ10 is ECCDVEBMGS06_ECC6_
            Parameter Name                                      Parameter value
login/no_automatic_user_sapstar                      0
login/system_client                                            001
SAPSYSTEMNAME                                           ECC
SAPGLOBALHOST                                           ecc6
SAPSYSTEM                                                    06
INSTANCE_NAME                                             DVEBMGS06
DIR_CT_RUN                                                 $(DIR_EXE_ROOT)$(OS_UNICODE)NTI386
DIR_EXECUTABLE                                         $(DIR_INSTANCE)exe
PHYS_MEMSIZE                                             512
rdisp/wp_no_dia                                             6
rdisp/wp_no_btc                                            3
icm/server_port_0                                          PROT=HTTP,PORT=80$$
ms/server_port_0                                          PROT=HTTP,PORT=81$$
rdisp/wp_no_enq                                   1
rdisp/wp_no_vb                                    1
rdisp/wp_no_vb2                                  1
rdisp/wp_no_spo                                   1
DIR_CLIENT_ORAHOME                              $(DIR_EXECUTABLE)

HI ,
SAP has recommended it like that
for accessing SAP web dynpro abap application you have to give the full FQDN i.e. host name with domain.
simply hostname alone wont work.
http://help.sap.com/saphelp_nw70/helpdata/en/67/be9442572e1231e10000000a1550b0/content.htm
Pls go through the link.This mite help
Thanks,
Aditya.

Runtime error while executing WD Application

Hi All,
I have developed a sample application with one text view and when i am executine the application, I am getting the runtime error.
The description is like:
Note
The following error text was processed in the system EC6 : Die URL enthält keine vollständige Domainangabe (numbers12 statt numbers12.).
The error occurred on the application server numbers12_EC6_00 and in the work process 2 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: CHECK of program CX_FQDN=======================CP
Method: LATE_CONSTRUCTOR of program CL_WDR_UCF====================CP
Method: HANDLE_REQUEST of program CL_WDR_UCF====================CP
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP
Method: EXECUTE_REQUEST of program CL_HTTP_SERVER================CP
Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
Module: %_HTTP_START of program SAPMHTTP
Error code: ICF-IE-http -c: 800 -u: SANJEEV -l: E -s: EC6 -i: numbers12_EC6_00 -w: 2 -d: 20080814 -t: 133813 -v: RABAX_STATE -e: UNCAUGHT_EXCEPTION
Can anyone suggest me the solution for this? Please le tme know if you need more details about this to findout the problem.
Thanks,
Raz

Hello,
I got this kind of problem, too and it was necessary to configure the FQDN to run web dynpro abap. You can do it in RZ10 transaction.
If you take a good look at the document, you'll see that it's necessary to configure the [FQDN|http://help.sap.com/saphelp_nw04s/helpdata/en/67/be9442572e1231e10000000a1550b0/content.htm].
Regards.

Runtime error in starting Lightroom

I receive the following message when I try to start Lightroom:
Microsoft Visual C++ Runtime Library
Runtime Error!
Program:...Files\Adobe\Adobe Photoshop Lightroom 1.2\lightroom.exe
This application has requested the Runtime to terminate it in an unusual way.
Please contact the application's support team for more information.
Lightroom ran well for several days and then failed to open with the above message.
I have tried everything I know to do (uninstalled and reinstalled the application, restored the computer to a restore point before Lightroom was originally installed, etc.) and do not know were to go from here. Suggestions would be appreciated.
I am using Windows XP sp2 and have 4 GB of ram and 250 GB of hard disk space.
Thanks,
Cliff Culp

Aha! A fix! Please look at this...
http://www.adobeforums.com/cgi-bin
bob frost, "Help! Runtime error after Lightroom 1.1 install!" #10, 27 Jun 2007 6:54 am

Runtime error while executing rule

Hello All,
While executing the DTP for a cube, im facing the error as Runtime error while executing rule -> see long text .
For this source is another Cube, where im loading the data from Cube to Cube.
Error Description are as follows:-
Error Location: Object Type    TRFN
Error Location: Object Name    0T9SCR6Q4VWS1SOPNRRBOY1YD51XJ7PX
Error Location: Operation Type ROUTINE
Error Location: Operation Name
Error Location: Operation ID   00034 0000
Error Severity                 100
Original Record: Segment       0001
Original Record: Number        557
and Also descripton is :-
Diagnosis
    An error occurred while executing a transformation rule:
    The exact error message is:
    Division by zero
    The error was triggered at the following point in the program
    GP4H0CW3MLPOTR3E8Y93QZT2YHA 4476
System Response
    Processing the data record has been terminated.
Procedure
The following additional information is included in the higher-level
node of the monitor:
   Transformation ID
   Data record number of the source record
   Number and name of the rule which produced the error
Let me know ur valuable suggestions on these error...
thanks.

Hello,
I have checked all the transformation and End Routines.All are working fine.Yesterday i have loaded some data into it, but today its gettting errored out.
Checked completely in the forum for threads related to this, but couldnt find proper thread which had solutions....
thanks,
srinivas.

Could someone help me with a Runtime Error while saving a PDF file?

While saving a 28 page PDF file in Illustrator today, I got a window saying, "This application has requested the "Runtime" to terminate it in a unusual way." It said to contact the applications support team for more information. I keep getting the same thing each time I try it. Does anyone know how to fix this issue or how I contact the applications support team ?
Thank you for any insight.
Pam

It is a 13.5x11 inch calendar. There are 14 pages with images on them and
some text. The other pages have text, a grid and a colored background with a
gaussian blur. I saved each page as an "outline".
The printer I am using requested I save all pages in a pdf file. I was
successful in saving all but about six pages, now I can't even open the
file.
What happens is... I open Illustrator
                               I open the pdf file
                               A window appears that says... Runtime Error,
This application has requested the Runtime to terminate it in an unusual
way. Please contact the application's support team for more information.
                               I select ok
                               then a window appears that says... Adobe
Illustrator CS5 has stopped working. A problem caused the program to stop
working correctly. Windows will close the program and notify you if a
solution is available.
                               Then the program closes.
So far I have not been notified of anything.
Please let me know if you need more details.
Thank you so much for helping me with this.
Pam

RunTime Error while saving a Sales Order

Hi All,
When i am saving a Sales Order, the system is throwing a Runtime Error.
The ABAP Code in the Runtime Error screen as follows.
          select * from (t681-kotab) appending table <cond_tab>
                 up to 1 rows
                 where kappl = se_kappl
                 and   kschl = se_kschl
                 and   datbi >= se_date
                 and   datab <= se_date
                 and   (coding_tab).
Till these days, there was no such error while saving a Sales Order.
How to resolve this issue?
Regards
Pavan

Hi,
The below piece of code is trying to get the contents of the table mentioned in T681-KOTAB.
select * from (t681-kotab) appending table <cond_tab>
up to 1 rows
where kappl = se_kappl
and kschl = se_kschl
and datbi >= se_date
and datab <= se_date
and (coding_tab).
The reason could be is someone has screwed up the entries in T681 table. Check that out.
Try to put a break point on this SELECT query and see what the value of T681-KOTAB holds before the SELECT query. Check whether such a table entry exists in DB.
Let me know if you are still stuck up.
If you can send me the ST22 dump of the run time error, i might be able to help you more on this.
Hope this helps.
Thanks,
Balaji

WHILE DELETING A SALE ORDER GETTING A RUNTIME ERROR

hi to all experts,
whenever i try to delete a particular sale order im getting a runtime error
stating that
Short text
    Screen: Illegal message
What happened?
    The current screen processing action was terminated since a situat
    occurred where the application could not continue.
    This is probably due to an error in the ABAP program or in the cur
    screen.
Error analysis
    The program attempted to issue a " " message during "Exit Command" processing.
    This is an illegal operation.
    The program was terminated.
    Screen name.............. "SAPMV45A"
    Screen number............ 4001
Trigger Location of Runtime Error
    Program                                 SAPMV45A
    Include                                 MV45AFZZ
    Row                                     370
    Module type                             (FORM)
    Module Name                             USEREXIT_SAVE_DOCUMENT
SourceCde
              message e001(zm) WITH text-335 ltab-kunnr text-334.
            else.
              if ktab-jkunnr <> ltab-kunnr.
                ktab-jkunnr = ltab-kunnr.
                jobsitecode = ltab-kunnr.
                CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
                EXPORTING
                  input = jobsitecode
                  IMPORTING
                  output = jobsitecode.
                SELECT SINGLE * FROM kna1 WHERE kunnr = jobsitecode.
                IF sy-subrc = 0.
                  ktab-jname1 = kna1-name1.
                  ktab-jstras = kna1-stras.
                ENDIF.
                chg_flg = 'X'.
              endif.
            endif.
          else.
            message e001(zm) WITH text-336.
* Validation for relationship between Sold-to Party and Ship-to Party
*          if ktab-ckunnr+0(4) NE ktab-jkunnr+0(4).
*            message e001(zm) WITH text-335 ktab-jkunnr text-337 ktab-ckunnr.
*          endif.
          custcode1 = ktab-ckunnr.
          CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
            EXPORTING
              input = custcode1
            IMPORTING
              output = custcode1.
          jobsitecode1 = ktab-jkunnr.
          CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
            EXPORTING
              input = jobsitecode1
            IMPORTING
              output = jobsitecode1.
          SELECT SINGLE * FROM knvp
          WHERE kunnr = custcode1
            AND vkorg = vbak-vkorg
            AND vtweg = vbak-vtweg
            AND spart = vbak-spart
            AND parvw = 'WE'
Error analysis
    The program attempted to issue a " " message during "Exit Command"
    This is an illegal operation.
    The program was terminated.
    Screen name.............. "SAPMV45A"
    Screen number............ 4001
Trigger Location of Runtime Error
    Program                                 SAPMV45A
    Include                                 MV45AFZZ
    Row                                     370
    Module type                             (FORM)
    Module Name                             USEREXIT_SAVE_DOCUMENT

Hi,
Seems there is some problem with the user exit USEREXIT_SAVE_DOCUMENT..
Put a breakpoint and see.
Regards,
Nagaraj

WHILE DELETING A SALE ORDER GETTING A RUNTIME ERROR " Screen: Illegal message"

Hi Experts,
While deleting a sales order giving run time error. PFB runtime error details.
If you know any OSS message, please let m know. I tried, but there is no luck.
Short text
    Screen: Illegal message
What happened?
    The current screen processing action was terminated since a situation
    occurred where the application could not continue.
    This is probably due to an error in the ABAP program or in the current
    screen.
What can you do?
    Note which actions and input led to the error.
    For further help in handling the problem, contact your SAP administrator.
    You can use the ABAP dump analysis transaction ST22 to view and manage
    termination messages, in particular for long term reference.
Error analysis
    The program attempted to issue a " " message during "Exit Command" processing.
    This is an illegal operation.
    The program was terminated.
    Screen name.............. "SAPMV45A"
    Screen number............ 4001
How to correct the error
    The program must be modified to correct the error.
    The modification must be made in "Exit Command" processing.
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1. The description of the current problem (short dump)
       To save the description, choose "System->List->Save->Local File
    (Unconverted)".
    2. Corresponding system log
       Display the system log by calling transaction SM21.
       Restrict the time interval to 10 minutes before and five minutes
    after the short dump. Then choose "System->List->Save->Local File
    (Unconverted)".
Source Code Extract
Line SourceCde
    1 *---------------------------------------------------------------------*
    2 *       FORM YVBEP_LESEN                                              *
    3 *---------------------------------------------------------------------*
    4 *       Lesen der Tabelle YVBEP (nicht sortiert)                      *
    5 *---------------------------------------------------------------------*
    6 FORM YVBEP_LESEN USING US_POSNR
    7                        US_ETENR
    8               CHANGING CH_TABIX.
    9
   10   YVBEP = SPACE.
   11   YVBEP-MANDT = VBAK-MANDT.
   12   YVBEP-VBELN = VBAK-VBELN.
   13   YVBEP-POSNR = US_POSNR.
   14   YVBEP-ETENR = US_ETENR.
   15   READ TABLE YVBEP.
   16   IF SY-SUBRC > 0.
   17     MESSAGE E506 WITH US_POSNR US_ETENR.
   18   ENDIF.
>>>>>   CH_TABIX = SY-TABIX.
   20
   21 ENDFORM.
Could you please help on this issue.
Thanks
Srinu

Hi Srinu,
it looks like you got the error message Schedule line &1 &2 is missing in table YVBEP while deleting the sales order.
It seems, that there are no SAP notes regarding this issue. Do you have this issue with all orders or with a single order?
If only a single order causes this issue, maybe something was wrong during an update.
If you get this error for many orders, then custom code (modification, enhancement, user exit in MV45AFZZ, ...) may be the reason for it.
If you have no custom code in module pool SAPMV45A, then contact SAP for this issue.
Regards,
Klaus

Portal runtime error while selecting page layout in WPC editor

Hello,
in web page composer, editing page, when i click on "select page layout" I have a portal runtime error popup.
The logfile shows the following :
#1.5 #005056834112005E0000000C00000FA800048E28A94966CC#1282205196819#com.sap.portal.prt.runtime#sap.com/irj#com.sap.portal.prt.runtime#1016#149##n/a##7ff9c93eab6811dfa9c70000003307de#SAPEngine_Application_Thread[impl:3]_15##0#0#Error##Java###10:06_19/08/10_0010_3344350
[EXCEPTION]
#1#com.sapportals.portal.prt.servlets_jsp.server.compiler.CompilingException: Error occurs during the rendering of jsp component
Caused by: com.sapportals.portal.prt.servlets_jsp.server.compiler.CompilingException: Error in java compiling
Caused by: com.sapportals.portal.prt.servlets_jsp.server.compiler.CompilingException: E:
usr
sap
EPD
JC00
j2ee
cluster
server0
apps
sap.com
irj
servlet_jsp
irj
root
WEB-INF
portal
portalapps
com.sap.netweaver.bc.util
lib
bc.util.public_api.jar(com/sapportals/wcm/WcmException.java):24: class WcmException is public, should be declared in a file named WcmException.java
(source unavailable)
1 error
I have the same by clicking on "check assignments"
Any help ?
Thanks

Hello Jego.
We faced the same issue after upgrade to EHP1 SP07 last week and managed to solve it by modification of layout.jsp and com.sap.nw.wpc.layoutmanager.LayoutBean within com.sap.nw.wpc.designtime.par. SAP's code requires an additional catch handler, so it is better to rise an OSS message.
As a workaround you may change a default layout for wpc main page (good for new pages) or manually edit output.xml for existing pages.
Best regards,
Aliaksandr Zhukau

Runtime Error when installing Adobe Creative Suite 5.5 Production Premium

I am trying to install Adobe Creative Suite 5.5 Production Premium, but I keep getting a 'Runtime Error!': This application has requested the Runtime to terminate it in an unusual way. Please contact the application's support team for more information.
What should I do? Any help greatly appreciated! I am running Win 7, Service Pack 1, 64 bit.

We cannot know. Your information is hugely insufficient. Check Your Windows Event Viewer and tell us the "fault module" plus provide detailed specs for your computer. Runtime errors usualyl mean that A DLL is missing, a security tool is blocking critical functions or that the processor is not compatible in teh first place. Just as well this could be a driver issue with your SATA bus or whatever.
Mylenium

Runtime error in enhancement spot-' mereq_topline does not exists.'

Hi all,
I have implemented an implicit enhancement spot in ME53n.
When i applied break point in enhancement spot and control goes to ebhancement spot in debugging mode, i got purchse requisition number in mereq_topline.
When i tried to use this structure value in code i get runtime error-
' mereq_topline does not exists.'
Can you please guide how to resolve this runtime error.
thanks.
Edited by: Sanjay_lnt on Sep 20, 2010 8:52 AM

Sanjay,
try to delete the enhancement and recreate it
Thanks
Bala Duvvuri

Runtime Error in ALV Tree Output

Dear All, I am trying to create a ALV Tree using Class cl_gui_alv_tree. The Report Shows the Output with the first Node but when i try to expand it is dumping with a runtime error GETWA_NOT_ASSIGNED in class CL_ALV_TREE_BASE and method SET_ITEMS_FOR_COLUMN. The Reason being the data which was copied in the initial node display to mt_outtab is getting refreshed.
Can any one of you help me the reason for the table getting refreshed. Do i need to pass any data.
I am doing the following steps.
1. Create Container,
2. Create Tree Class object
3. Generate the Field Catalog.
4. Set table for first display " With empty internal table
5. Generate the Hierarchy
6. Call the Method Frontend Update.
Let me know if i had missed any steps in the process.
Thank you,
Regards,
Swaroop Patri

One reason for getting this error is using local defined tables for it_outtab parameter in the below code:
To get rid of the dump, define two distinct output tables globally: one is an empty table which you will pass to the below method, other one is your real output table whose size increases dependently.
CALL METHOD go_tree->set_table_for_first_display
      EXPORTING
        is_hierarchy_header = ls_hier_header
      CHANGING
        it_outtab           = gt_data_e "Empty table
        it_fieldcatalog     = gt_fcat_tree.

Runtime error in LSMW to create Material Master

Hi all,
I am trying to create Material No. using direct input method in lsmw. The program name is RMDATIND. But while executing the last step i.e Start Direct input program I am getting a runtime error
"A RAISE statement in the program "SAPLMG25" raised the exception
condition "NOT_FOUND".
Since the exception was not intercepted by a superior
program, processing was terminated."
I have checked all the steps of lsmw. Any idea why this specific error is coming?

Are you able to create the material manually with the data. If you have checked the basic data view then i would check to see if base unit of measure is mandatory and if its being passed/mapped properly for the material you are creating.

CX_FQDN runtime error

Similar Messages

Maybe you are looking for