CX_RSR_X_MESSAGE when creating update rules

Hi,
I'm trying to activate SAP Demo scenario for procurement, infocube 0D_PU_C01. I have activated everything except for update rules. Activation of update rules fails with CX_RSR_X_MESSAGE short dump. When I try to create UR manually I get the same error after filling the first screen.
I'm getting pretty out of any ideas. I debuged the error, the deepest I could get was the RST_TOBJ_DERIVABLE function module, called with parameters:
I_TIMNM_FROM = '0CALDAY'
I_TIMNM_TO = '0CALMONTH'
The FM goes like this:
*... ist überhaupt eine Zeit ?
IF cl_rsr=>check_time( i_timnm_from ) EQ rs_c_false.
e_subrc = 4. RETURN.
ENDIF.
The first line with method cl_rsr=>check_time with parameter '0CALDAY' falls into short dump.
I tried to go deeper, inside the cl_rsr=>check_time method the function module RRSI_VAL_SID_SINGLE_CONVERT is called with parameters:
i_iobjnm = '0IOBJNM'
i_chavl = '0INFOPROV'
- that's where the short dump occurs. The error is quite deep and I dont't see the logic of the code. I just checked for existence of these infoobjects - 0INFOPROV is active, 0IOBJNM doesn't exist (not even business content version).
Anybody help please... Our version is SAP NetWeaver BI 7.0, latest support package SAPKW70012.
Thank you,
Marek

OK, problem solved, I had to reactivate 0IOBJNM infoobject (RSD5).
M

Similar Messages

Problem when creating update rules

Hi Friends..
I'm actually having a problem when I'm creating update rules from my cube to my Infosource. This infosource is created by Dierct update of Master data (ZXXXX) Infoobject. the error which is popping up is ,
Data source ZMMOBJ1 not maintained (check your entries)
Message no. RSAU252
Diagnosis
The data source is not active
Can some one guide me, How I can resolve this error.??
and where the problem must have been??
Thanks alot in advance,

Hi,
Check the infosource you are using for the cube. you cant use direct update infosource.
'Direct update of master data' infosource updates into the infoobject.
you will not have update rules for this direct update.
you use update rules only when you use flexible update infosource.
hope its clear.
shylaja.

Error when activating update rule

HI BI Expert,
The original transfer rule for 2LIS_11_VAITM was deleted accidently and I created new one and mapped with the existing infosource. The system always generates the following error at the time of transport to another client.
Error when activating update rule D1GOAPD9O0P9CFOY8KBSOUDFA
Activation of the update rules for ZO_SOP_1 ZT_SOP_SALO_ITM
IC=ZO_SOP_1 IS=ZT_SOP_SALO_ITM error when checking the update rules.
Would you kindly be able to suggest me what steps I need to take so as to correct this issue?
Thanks.

Hi,
When you say that update rule was accidently deleted, was that attached to transport request and transported to your QA & PRD at that time.
Because it may happen that, your old rules are still there in QA & PRD and the new rules are failing to overwrite that.
If it is the case, then you may have to open the client for QA & PRD and delete the existing update rule (doesnt sound good practice though), and then create a fresh update rule and transport.
Rgds,
Vikram.
Rgds,
Vikram.

"Error when activating update rule" after changing ODS key

Hi Gurus,
I have problem when transporting in productive system an existing ODS & the update rule linked. The message is : "Error when activating update rule".
This is when i move one field from the key to a simple field of the ODS.
Before transporting requests, i deleted data in the ODS by right-click on ODS --> Request tab --> select the request --> click on delete....
I don't understand because i did the same in Qual environment and everything is OK : transport request & ODS loading...
Please help.....

Hello,
Please try to check/perform the following steps:
1- You must ensure for the update rule have mapping between infosources
   and ODS/CUBEs correct, this means that also these objects need
   to be of the same version in the source system of the transport as in
   target system.
2- Please ensure all infoobjects in the cube are active.Please
   reactivate all the objects again in source system.
3- Ensure all infoobjects are found in the communication structure.
4- Please try to collect the update rule via BW transport connection
   with the grouping option "only necessary objects" and then transport
   those objects again.
Could you please reactivate the infocube and its update rules again
and then create a new transport for this infocube and transport it
again.
Best regards,
Paula Csete

Where is the option "create update rule" in BW 7.3?

Hi, all.
We have updated our BI sandbox to BW 7.3. After installing cube 0PT_C01 from the BCT, I realized that infosource 0HR_PT_3 is not linked to the cube. So I was trying to manually create the update rule. But that "create update rule" option is nowhere to be found. Can you please advise?
Thanks,
Jonathan.

Hi jonathan,
you are implementing time and labour 0PT_C01.
for that we have only 2 standard data sources
1 is 0HR_PT_1
2 is 0HR_PT_2
in addition to the above data sources we can also use 0HR_PT_3 data source for the info provider 0PT_C01.
PL check the below link
http://help.sap.com/saphelp_nw04/helpdata/en/18/3a8337fb02735ce10000009b38f8cf/content.htm
regards
venuscm

Error when activating update rule after transporting to QA

Hi,
When we transport Info cubes and update rules along with Process chains. There are the following errors in Transport request(XXXXXXXX).
1. Error when activating update rule 22HSFD3ZMALU46LS0R8PRF2MW
IC=ZSDPCXY2 IS=2LIS_11_VAITM error when checking the update rules
2. Error when activating update rule 7NT4WIDPDCN2ERFDRXIGH95PM
IC=ZSDPCXY2 IS=2LIS_12_VCHDR error when checking the update rules
and etc.
Then we activated and saved all the erroneous update rules in another tranport request(YYYYYYYY) and again we transported alongwith the previous transport request(XXXXXXXX).
The last request(YYYYYYYY)was successfully tranported and still there are same errors in TR(XXXXXXXX).
Quick answers will be highly appreciated.
Regards,
Vijay

Hi Vijay,
Next time you would have transport only (YYYYYYYY). Transport Request (XXXXXXX) was not required to be moved.
Normally Update Rule gets deactivated in QA when any changes to the CUbe/ODS are moved.
Thus either you can transport transport request for only active update rule to QA or activate your UR directly in QA system in case you have authorization to do that.
Regards,
Rohini

Error when transpotring Update Rules

Dear colleagues.
When transporting an update Rules into our Quality enviroment the system pops up the following error:
IC=ZWEPP_C02 IS=ZWE_BOM_RMX_IS syntax error: rows 0.
I've verified the Update Rules on the Quality System and everything is correct but it remains inactive due to the transport fails.
I would appreciate your feedback.
Thanks in advance.

Dear khaja.
I send you the transport log as well as the Return Code.
Error when activating update rule 5MYASZMBOIQZSRR60674OBKJ3
IC=ZWEPP_C02 IS=ZWE_BOM_RMX_IS error when generating InfoCube Update program
IC=ZWEPP_C02 IS=ZWE_BOM_RMX_IS syntax error: rows 0 (When generating the update program for data target ZWEPP_C02, InfoSource ZWE_BOM_RMX_IS, a syntax error occured in row 0. Message no. RSAU466)
Errors occurred during post-handling RS_AFTER_IMPORT for ROUT L
Please, let me know if you need anything else.
Thanks.

Error when copying update rules!!!

Hello All,
I am trying install 0SD_C03 from business content, however I am getting following error. Cube got installed properly.
Error when copying update rules
Patch levels are
SAP_BW - 0014
BI_CONT - 0005
Please help me in solving this error.
Regards,
PNK

Hi,
The error message show as below. There is no longtext
Error when copying update rules
Message no. RSAU457
But, when I installed FI-AP cubes, update rules are installed without any error. Is there any settings differs from FI to logistics datasources?
Regards,
PNK

DSO error while creating update rules

Hi All,
i am new to BI 7.0 , while creating update rules for datastore object , i have given the infosource name, and tried to activate it, then i got the error,
ERROR: infoobject 0recordmode is missing from the infosourse
Can any one help, points are assured for the suggestions
Thanks in advance
Peddinti

Hi,
Add 0recordmode info object to your info source and again try to create DTP, 0recordmode is requried in DSO to keep data with history.(like before image,after image,etc), by adding this you dont have any problem, at the time of creating info source itself system will prompt you that this info object is missing do you want to add here say yes.
Regards
Sankar

Cannot Create Update Rule from Infosource to Cube

Hello;
I am a beginner to BI and am learning. This may be a very basic question, but I got stuck.
In the create update rule screen, I get an error message that says
Data Source (whatever the name is) not maintained. (check your entries)
Could some one help as to where I went wrong?
Thx,
Sushma
Su

Goto your InfoSource and open DataSource Structure and transfer structure. Check if the structure is correct, make the necessary changes if required and activate it. Then create update rules providing correct infosource name. Until you create /activate your transfer structure, you won't be able to create update rules.
Reward point if helps.
Regards,
Ashok
Message was edited by:
ashok saha

Interesting - Different views when creating substitute rule in UWL and normal view

Hi Guys,
Just came across something interesting i thought i should mentioned it here incase someone knows why. When creating the substitute rule on the MSS main page one gets the window without a small road map, however if you do that via the UWL menu you get a nice view with a road map.
From the main page when you click on the create rule button you get this
=>
From the UWL side menu you get this, but the button being clicked is teh same. Anyone know how this works and how to make it the same ?

Moderator Spotlight - Siddharth Rajora Thank you very much for your reply. So just to clarify a few things
Is it possible at all to have the road map when creating substitution rules from the main MSS lane/manager view on the main page? I am on Webdynpro ABAP. If so can you please help with the steps.
I am right in saying that the road map view in UWL is based on WEBDYNPRO JAVA?
We are currently on ECC6 EH6, would i be correct to tell the boss that road map will is not available in EHP7
Basically the boss would like the road map from the main MSS lane/Launch pad. Thats what he prefers. I have tried to identify the application that is used to display the road map but i cant find it, it looks like its not WEBDYNPRO ABAP. In UWL view When I right click on th button i do not get the technical help to see the application which is what i normally do and it works on the launch pad/MSS lane

Creating update rules between 2 Infosources

Can anyone mention the steps for creating update rules between two 3.0 Infosources.
Thanks,
Shweta

Hi,
Have a look at these documents:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50a29380-7adc-2e10-cfa2-fa55bcb17710?QuickLink=index&overridelayout=true
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/37dda990-0201-0010-198f-9fdfefc02412?QuickLink=index&overridelayout=true
Regards,
Sunny

Error when activating update rules for R/3 training and event management

hi all,
when iam trying to activate update rules for training and event management cube it is giving fallowing error."IC=0PE_C01 IS=0HR_PE_1 error when checking the update rules
Message no. RSAU461".
please guide me how to solve this issue.
thanks & regards
Vamshi D Krishna

Hi Vamsi,
Have you followed the following document to implement HR ?
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a0780530-bf03-2b10-d5ad-e9e8a53def23

Error when activating update rules

Hi ,
0RT_C36 cube shows --- stock per weeek (ocalweek)
My requirement is on daily wise .
So i copy the standard one 0RT_C36 and add the 0cal day.In update rule 0calweek has the reference feild posting date For 0calday i mapped with the same feild posting date . Error has occured when activating the update rule . Error is' No component exists whith the feild sid_calweek_f.
Regards
chakra

Hi,
The Automatic conversion in the update rules helps us map 0CALDAY of Info source to 0CALWEEK of the cube. So it is not a problem with this mapping.
These type of problem occurs especially when we copied update rules. So what we have to do is checking all mappings for corectness in the mapping.
With rgds,
Anil Kumar Sharma .P

While creating Update rules -"Error Info source does not exist"

While creating an update rule I am getting an error that Info source doesnot exist though the inf source is active.
here is error:
No communication structure exists in version abc... A
Message no. RSAU251
Diagnosis
In order to be able to maintain the update rules an active communication structure must be available.
Procedure
This error message can have two causes.
No active communication structure exists.
Activate the communication structure in the Data Warehousing Workbench.
No communication structure exists for the InfoSource.
Create a communication structure in the Data Warehousing Workbench for the InfoSource.
<<text removed>>
Thanks,
Vasu
Edited by: Matt on Apr 26, 2010 9:31 AM

Hi Vasu,
as it clearly shows below message
No communication structure exists for the InfoSource.
Create a communication structure in the Data Warehousing Workbench for the InfoSource.
Create an info source first and assign it to your datasource and map the fileds in transfer rules and activate it.
Then try to create the update rules between your target and info source.
Hope this helps.
Regards,
Reddy

CX_RSR_X_MESSAGE when creating update rules

Similar Messages

Maybe you are looking for