CX_SY_CONVERSION_NO_NUMBE
Hi All,
we are getting a short dump, can you please help me with this:
Runtime Errors CONVT_NO_NUMBER
Exception CX_SY_CONVERSION_NO_NUMBER
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_CONVERSION_NO_NUMBER', w
caught in
procedure "SEL_BINPUT" "(FORM)", nor was it propagated by a RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
The program attempted to interpret the value "1,131.64 " as a number, but
since the value contravenes the rules for correct number formats,
this was not possible.
Whole numbers are represented in ABAP as a sequence of numbers, possibly
with an algebraic sign.
The following are the possibilities for the representation of floating
point numbers:
[algebraic sign][mantissa]E[algebraic sign][exponent]
[algebraic sign][whole number part].[fraction part]
For example, -12E+34, +12E-34, 12E34, 12.34
If the error occurred in your own ABAP program or in an SAP
program you modified, try to remove the error.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"CONVT_NO_NUMBER" "CX_SY_CONVERSION_NO_NUMBER"
"SAPMF05B" or "MF05BFS0"
"SEL_BINPUT"
I looked into the notes but couldn't find any.
any help will be really appreciated.
Thank you.
Rajeev Gupta
Hi Rajeev,
1,131.64 looks like the external (US-english) representation of a number. This cannot be implicitly converted to a numeric fomat.
You can convert the value before moving it to the target. We do this as follows (generic solution). Usulayy we use it for generic handling of editable grid input, but it could help in your context:
DATA:
lv_type TYPE string,
lr_dat TYPE REF TO data,
ls_tabfield TYPE tabfield,
lv_tabname TYPE tabname,
lv_fieldname TYPE fieldname,
lv_field TYPE scrfname.
FIELD-SYMBOLS:
<dat> TYPE ANY.
* find any structure or table field with characteristics for the internal value
ls_tabfield-tabname = <table or structure of target field>.
ls_tabfield-fieldname = <fieldname in above structure or table>.
CONCATENATE <tbn> <col>
INTO lv_type SEPARATED BY '-'.
* create a data object of the required type
CREATE DATA lr_dat TYPE (lv_type).
ASSIGN lr_dat->* TO <dat>.
CALL FUNCTION 'RS_CONV_EX_2_IN'
EXPORTING
input_external = <Input value in external representation>
table_field = ls_tabfield
* CURRENCY = CURRENCY
IMPORTING
output_internal = <dat>
EXCEPTIONS
* handle any error
Regards,
Clemens
Similar Messages
-
Hi Friends,
I have asigned the component 'ICON' to the field symbol . While i am adding the value to the field symbol it is going for Dump.
Erro Message :
Unable to interpret "@08\QGreen Light; Go; Okay@ " as a number.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_CONVERSION_NO_NUMBER', was not
caught and
therefore caused a runtime error.
The reason for the exception is:
The program attempted to interpret the value "@08\QGreen Light; Go; Okay@ " as
a number, but
since the value contravenes the rules for correct number formats,
this was not possible.
Code :
ASSIGN COMPONENT 'ICON' OF STRUCTURE <line> TO <fs_icon>.
add wa_result-icon to <fs_icon>.
Please find the information and i waiting for your valuable anwers.
Thanks,
Shankara NarayanHI,
What do you mean by adding the value?
Do you want to move the value of wa_result-icon to the field-symbols <fs_icon>.
use move statement or use '=' operator.
ADD will try to do an addition.
You cannot add character fields. It will surely give a dump.
Do as follows:-
Move wa_result-icon to <fs_icon>.
Regards,
Ankur Parab -
Exception = CX_SY_CONVERSION_NO_NUMBER
Hi,
May we ask for your assitance, why we are getting this error:
Error analysis:
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_CONVERSION_NO_NUMBER',
was neither
caught nor passed along using a RAISING clause, in the procedure
"CONVERT_FISCPER_SELECTION" "(FORM)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
The program attempted to interpret the value "XXXX" as a number, but
since the value contravenes the rules for correct number formats,
this was not possible.
Information on where terminated:
The termination occurred in the ABAP program "SAPLGUSL" in
"CONVERT_FISCPER_SELECTION".
The main program was "SBIE0001 ".
The termination occurred in line 406 of the source code of the (Include)
program "LGUSLF01"
of the source code of program "LGUSLF01" (when calling the editor 4060).
The program "SAPLGUSL" was started as a background job.
Processing was terminated because the exception "CX_SY_CONVERSION_NO_NUMBER"
occurred in the
procedure "CONVERT_FISCPER_SELECTION" "(FORM)" but was not handled locally, not
declared in the
RAISING clause of the procedure.
The procedure is in the program "SAPLGUSL ". Its source code starts in line 350
of the (Include) program "LGUSLF01 ".
Thanks.HI...
this error occur when we are trying to move data of charactor type or even SPACE or special charactor to NUMERIC type....
soloution to your problem....
only give numeric values in the selection screen or look for some user exit if available or go for enhancement framework.
this is a same kind of problem which i was getting
regards -
Solve Runtime errors 'CX_SY_CONVERSION_NO_NUMBER'
When I test a subroutine that included in SAPScript,a runtime error occured.Below is the error message.
Unable to interpret " XXXX.XX " as a number.
Error Analysis:
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_CONVERSION_NO_NUMBER', was not
caught in
procedure "SUB_DETAILS" "(FORM)", nor was it propagated by a RAISING clause. Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.The reason for the exception is:
The program attempted to interpret the value " XXXX.XX " as a number, but
since the value contravenes the rules for correct number formats,
this was not possible.
DATA: GV_AMOUNT TYPE KWBTR.
READ TABLE IN_PAR WITH KEY NAME = 'FEBSCA-KWBTR'.
PACK IN_PAR-VALUE TO GV_AMOUNT.
>>>>> GV_AMOUNT = IN_PAR-VALUE.
How can i solve this ? Big help needed. Appreciated. Thanks,
ShehryarHi shehryar,
if you do a test output in SAPscript forms development in SE71, output fields are filled with X characters regardless if they are numeric.
If you call a subroutine in SAPScript, the values are passed and the CX_SY_CONVERSION_NO_NUMBER is raised.
In your subroutine you should be aware that all Sapscript symbols are character-like data and must be converted to numeric representation.
Try to integrate this subroutine (derived from Padmam's contribution yesterday):
*& Form conv
* Try conversion to numeric value
FORM conv USING pv_clike TYPE c
CHANGING pv_number
pv_error TYPE sy-subrc.
TRY.
CLEAR pv_error.
pv_number = pv_clike. "Convert string to number.
CATCH cx_sy_conversion_no_number.
pv_error = 1.
CATCH cx_sy_conversion_overflow.
pv_error = 2.
ENDTRY.
ENDFORM. " conv
Now you can test your form as well as use it.
Regards,
Clemens -
Error Web Template (CX_SY_CONVERSION_NO_NUMBER )
Hi all,
I get error when I run my Web template and in the Query there are condition TOP N,
here the error:
An exception with the type CX_SY_CONVERSION_NO_NUMBER occurred, but was n
The argument '3WOB03G9HX4LYU5Y7TH3MXNNU' cannot be interpreted as a number
Thanks in advance
supriatnaHi,
Is the 'N' in the 'Top N' condition a variable that you take as an input? If yes, does your web template ask the user for an input to this field?
cheers,
Ajay -
Hi All,
We have PI sync scenario,SOAP to Proxy.
We are geeting the below error in Proxy .
Error during proxy processing An exception with the type CX_SY_CONVERSION_NO_NUMBER occurred, but was neither handled locally, nor declared in a RAISING clause The argument ' 1,000.000' cannot be interpreted as a number.
But when the same data got updated in Proxy.Not sure about the root cause of the error.
Regards,
ArunHi ,
It looks like proxy is not able to convert string to number or the format of number is incorrect. This is only possible reason of this exception.
The argument ' 1,000.000' cannot be interpreted as a number.
Check out if the format is correct.. .
Regards
Aashish Sinha -
BSP Exception: CX_SY_CONVERSION_NO_NUMBER
Hello,
Kindly provide help on how to handle exceptions in bsp.
For the exception class: CX_SY_CONVERSION_NO_NUMBER having exception id: CONVT_NO_NUMBER, I would like to know why this excetion occurs and how can it be handeled.
Thanks and Regards,
ReemaHi Reema,
everything should be explained in the error you get.
CX_SY_CONVERSION_NO_NUMBER is the system exception for a conversion into a number. For example:
data: num type i,
char type c.
char = 'X'.
num = char.
There you get this error, because in this case you try to convert a character into a number which is not possible.
Regards,
Rainer -
CX_SY_CONVERSION_NO_NUMBER
Hi,
I´m trying to prin a Form and it throws the following dump:
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_CONVERSION_NO_NUMB
caught in
procedure "OBTENER_COD_BARRA" "(FORM)", nor was it propagated by a
clause.
Since the caller of the procedure could not have anticipated that t
exception would occur, the current program is terminated.
The reason for the exception is:
The program attempted to interpret the value "X" as a number, but
since the value contravenes the rules for correct number formats,
this was not possible.
data
w_sum_impar type i,
w_sum_par type i,
w_nro,
w_barra_aux(39) TYPE c,
wa_barra39(39) TYPE c,
271 MOVE: j_1apacd-j_1apac TO wa_pracd,
272 j_1apacd-j_1apacvd TO wa_ent-value.
273
274
275 MOVE wa_ent-value TO wa_vdpcd.
276
277 *concatenamos los valores necesarios
278 CONCATENATE wa_cuit wa_j_1aoftp wa_xblnr+0(4)
279 wa_pracd wa_vdpcd
280 INTO wa_barra39.
281
282 * Obtener el dígito verificador.
283 CLEAR: w_pos,
284 w_nro,
285 w_sum_impar,
286 w_sum_par,
287 w_sum_total,
288 w_ultimo,
289 w_dig_ver.
290
291 w_barra_aux = wa_barra39.
292
293 DO 39 TIMES.
294
295 w_nro = w_barra_aux+0(1).
296 w_pos = sy-index.
297 w_pos = w_pos MOD 2.
298
299 IF w_pos = 1.
300 *Acumulamos los valores de las posiciones impares.
>>>> w_sum_impar = w_sum_impar + w_nro.
302 *Acumulamos los valores de las posiciones pares.
303 ELSE.Ciao Lucila,
you can avoid the dump using a try catch statment.
data ex type ref to CX_SY_CONVERSION_NO_NUMB.
try.
w_sum_impar = w_sum_impar + w_nro.
catch CX_SY_CONVERSION_NO_NUMB into ex.
catch.
**Put here some code to manage the error. For example a write, or a pop-up or exit
** from the program.
endtry.
The reason because you have an 'X' in your field w_nro (I think it is this one) depend on the initial concatenate.
I hope this can help u.
Bye -
CX_SY_CONVERSION_NO_NUMBER Error
Hi All,
Iam executing a query in Analyser. Iam getting the following error and analyser id getting disconnected from server.
The argument '7.3774100000000000E+05' cannot be interpreted as a number
An exception with the type CX_SY_CONVERSION_NO_NUMBER occurred, but was neither handled locally, nor declared in a RAISING
Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
Not able to find for which object the error is.
When i run the query in RSRT it is working fine.
Can anyone tell how to solve this problem in analyser.
Thanks
SwathiHi ,
Check these notes :
1. 1283415 - BEx Analyzer: argument cannot be interpreted as number
2. 1023681 - Error creating new lines
Regards,
Lokesh -
CX_SY_CONVERSION_NO_NUMBER dump coming
CX_SY_CONVERSION_NO_NUMBER dump appears when key is sleected in transaction WTYRCL.
Unable to interpret " " as a number.
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_CONVERSION_NO_NUMB
caught in
procedure "CONVERSION_IN2EX" "(FORM)", nor was it propagated by a R
clause.
Since the caller of the procedure could not have anticipated that t
exception would occur, the current program is terminated.
The reason for the exception is:
The program attempted to interpret the value " " as a number, but
since the value contravenes the rules for correct number formats,
this was not possible.
What could be possible reason for this ?Theres 612 notes about this and 21 about CONVERSION_IN2EX
Did you look at them?...
Regards
Juan -
Hi everybody,
We are migrating R/3 from 4.6 to 5.0, when executing Z's programs using function 'EXCEL_OLE_STANDARD_DAT' in the new version it ends in a short dump CX_SY_CONVERSION_NO_NUMBER, that's because de field of the data table for the column in excel is an integer, and de the header for this column is text, can anybody help with this problem.
Thanks in advance,
Julio CesarPlease refer to Note 721793 - Problems with MS_EXCEL_OLE_STANDARD_DAT.
- Guru
Reward points for helpful answers -
CX_SY_CONVERSION_NO_NUMBER?While uploading an Excel File.
Hi,
I am trying to upload an excel which contains customer number, shipping point details , time details....... The upload program was working before upgrade to ECC 6.0.
But right now when i try to uplaod the file i get the following dump messege.
Unable to interpret "*000" as a number.
Can anyone tell me what is the correct number format and how I can resolve this problem.
Regards,
MDHi
You may check the excel value ,this error show you ,it's not a number!
thanks
Edited by: Tom zhang on Jul 3, 2009 3:37 AM -
Hi gurus,
we have a custom report which retrieves the data from table TSP03 from backend and synchronise if there is change in the data in SRM table ZHTSP03. currently this report is generating dump CONVT_NO_NUMBER , with short text
Unable to interpret "IlFQ" as a number.
i have checked all data in TSP03 but there is no string like "IlFQ" . in the code the dump is occuring at the below syntax.
>>>>> CALL TRANSFORMATION id
SOURCE table = <tab>
RESULT table = data.
i have checked the entries of internal table <tab> which is the entries of table TSP03 and could not know why this dump is happening.
the data type for <tab> is type standard table AND
data is type data.
Please help
Thanks and Regards
Aditya ShrivastavaHi ,
the code where the dump is getting is
call transformation id
source table = <tab>
result table = data.
Thanks
Aditya
Edited by: Aditya Shrivastava on Mar 16, 2010 4:17 PM
Edited by: Aditya Shrivastava on May 4, 2010 8:19 AM -
CX_SY_CONVERSION_NO_NUMBER dump.
Hi all,
I have an issue while i move a string field to WRBTR field.
I have a form in which an int table is passed. It has a field of Char255 length.
This is moved to string field. All the commas and periods are replaced with spaces.
Later this is moved to WRBTR field. It gives dump here as
Unable to interpret "000 " as a number.
It seems there is an extra space at the end of the number in the string field.
I have tried CONDENSE WITH NO GAPS the string field and the same with the char255 field too with no success.
Eg code :
DATA : tt_inp TYPE STANDARD TABLE OF itcsy,
ls_intab TYPE itcsy,
lv_wrbtr TYPE wrbtr,
lv_wrbtr_char TYPE string.
FORM zztest TABLES itab TYPE tt_inp.
READ TABLE in_tab INTO ls_intab WITH KEY name = 'BSIK-WRBTR'.
IF sy-subrc EQ 0.
lv_wrbtr_char = ls_intab-value.
ENDIF.
CONDENSE lv_wrbtr_char.
REPLACE ALL OCCURRENCES OF '.' IN lv_wrbtr_char WITH ''.
REPLACE ALL OCCURRENCES OF ',' IN lv_wrbtr_char WITH ''.
lv_wrbtr = lv_wrbtr_char. (giving dump in this statement)
ENDFORM.
Please find above the code which is resulting in error. when passing the data from ls_intab-value to lv_wrbtr_Char an extra blank is getting appended at the end. Tried all options as CONDENSE WITH NO GAPS, SHIFT, PACK etc.
Please help me in this regard.
Thanks,
PrasadHi,
The problem is not with the move statement but with thr replace logic you are using.
REPLACE ALL OCCURRENCES OF '.' IN lv_wrbtr_char WITH ','.
REPLACE ALL OCCURRENCES OF ',' IN lv_wrbtr_char WITH '.'.
First you replace . with ,. This time the string has values with comma.
next you replace comma with dots . this time the string may contain two or more dots converting the comma as changed recently also.
commas in inappropriate palces will cause the dump.
Try modfying the logic for proper separation.Make sure that the number you get after all replacement is a valid SAP number.
Like, 12,345.50 is your input.
your output to be put in wrbtr field should be 12.345,50.
With the current logic it becomes: 12,345,50
and then 12.345.50 which is not a valid number. that is why it gives dump.
change your logic like this.
DATA : tt_inp TYPE STANDARD TABLE OF itcsy,
ls_intab TYPE itcsy,
lv_wrbtr TYPE wrbtr,
lv_offset type i,
lv_numc type n length 16,
lv_wrbtr_char TYPE string,
itab like tt_inp,
result type MATCH_RESULT_TAB with header line.
lv_wrbtr_char = ' 12,456.00'.
CONDENSE lv_wrbtr_char no-gaps.
find '.' in lv_wrbtr_char match offset lv_offset.
REPLACE ALL OCCURRENCES OF ',' IN lv_wrbtr_char WITH '.'.
if lv_offset is not initial.
replace section offset lv_offset length 1 of lv_wrbtr_char with ',' .
endif.
lv_numc = lv_wrbtr_char.
lv_wrbtr = lv_numc.
write lv_wrbtr.
Here i have assumed that the user data in sAP system has decimal format as 1.234.456,00
Regards,
Kamini Rawat -
error analysis as in ST22 TRANSACTION:
AN EXCEPTION OCCURED THE EXCEPTION ASSIGNED TO CLASS CX_SY_CONVERSION_NO_NUMBER WAS NOT CAUGHT WHICH LED TO AN ERROR. THE REASON FOR THIS EXCEPTION IS :
THE PROGRAM TRIED TO INTERPRET VALUE ':4' AS NUMBER SINCE THE VALUE CONTRAVENES THE CORRECT NUMBER FORMAT THIS WAS NOT POSSIBLE.
ATTACHED IS MY PROGRAM
REPORT ZVXR0303
LINE-COUNT 60(3)
LINE-SIZE 132
MESSAGE-ID VN.
Tables: VBEP, VBAP, NAST.
DATA: BEGIN OF HEADER,
ORDER(15) VALUE 'ORDER',
LINE(5) VALUE 'LINE',
MATERIAL(14) VALUE 'MATERIAL',
DUE(15) VALUE 'DUE (MAD)',
CREATED(10) VALUE 'CREATED',
QTY(10) VALUE 'QUANTITY',
KEY(5) VALUE 'KEY',
TYPE(5) VALUE 'TYPE',
END OF HEADER.
DATA: Begin of IDAT OCCURS 0,
VBELN LIKE VBAP-VBELN,
POSNR LIKE VBAP-POSNR,
werks LIKE VBAP-WERKS,
cuobj LIKE vbap-CUOBJ,
MBDAT LIKE vbep-mbdat,
ERDAT LIKE VBAP-ERDAT,
MATNR LIKE VBAP-MATNR,
KWMENG LIKE VBAP-KWMENG,
QTY TYPE I,
END of IDAT.
class cl_abap_char_utilities definition load.
constants: tab type c value cl_abap_char_utilities=>HORIZONTAL_TAB.
DATA: t_record(1000) TYPE C.
DATA: C_KWMENG(20) TYPE C.
data: OUTFILE(50) value '/usr/users/ftpsapfi/locks_540318'.
DATA: BEGIN OF TKOMCON OCCURS 50.
INCLUDE STRUCTURE CONF_OUT.
DATA: END OF TKOMCON.
DATA: iKEY TYPE I,
offset TYPE I,
KeyTypeLOC TYPE I,
KeyNumberLOC TYPE I,
type(15) TYPE C.
select-options: sVBELN FOR VBEP-VBELN obligatory,
sMAD FOR VBEP-MBDAT obligatory,
sERDAT FOR VBAP-ERDAT,
sMATNR FOR VBAP-MATNR,
sWERKS FOR VBAP-WERKS,
sKWMENG FOR VBAP-KWMENG.
SELECT
vbap~vbeln
vbap~POSNR
vbap~werks
vbap~cuobj
VBEP~MBDAT
VBAP~ERDAT
VBAP~MATNR
VBAP~KWMENG
INTO CORRESPONDING FIELDS of IDAT
FROM ( VBEP INNER JOIN VBAP ON vbepvbeln = vbapvbeln
AND vbepposnr = vbapposnr )
WHERE BMENG > 0
AND vbep~MBDAT IN sMAD
AND VBEP~VBELN in sVBELN
AND VBAP~werks IN sWERKS
AND VBAP~ERDAT IN sERDAT
AND VBAP~MATNR IN sMATNR
AND VBAP~KWMENG IN sKWMENG
AND VBAP~ABGRU = SPACE.
APPEND IDAT.
ENDSELECT.
PERFORM TOP-OF-PAGE.
if sy-batch = 'x'.
OPEN DATASET OUTFILE FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
TRANSFER t_record TO OUTFILE.
endif.
IF SY-SUBRC = 0.
LOOP at IDAT.
write IDAT-KWMENG DECIMALS 0 TO C_KWMENG.
REFRESH TKOMCON.
CALL FUNCTION 'VC_I_GET_CONFIGURATION'
EXPORTING
INSTANCE = idat-cuobj
LANGUAGE = NAST-SPRAS
TABLES
CONFIGURATION = TKOMCON
EXCEPTIONS
OTHERS = 4.
LOOP AT TKOMCON
WHERE ATNAM = 'S_SK_SPEC_KEY' OR ATNAM = 'S_MK_SPEC_KEY'
OR ATNAM = 'S_SK_CONSC_KEY' OR ATNAM = 'S_MK_CONSC_KEY'.
IF TKOMCON-ATNAM = 'S_SK_CONSC_KEY'
OR TKOMCON-ATNAM = 'S_MK_CONSC_KEY'.
KeyTYPELOC = 0.
keynumberloc = 2.
TRANSLATE TKOMCON-ATWRT+KeyNumberLOC(4) USING ': '.
IF TKOMCON-ATWRT+KeyNumberLOC(4) CO '0123456789 '.
iKey = TKOMCON-ATWRT+KeyNumberLOC(4).
IF ( TKOMCON-ATWRT+KeyTypeLOC(2) = 'FR' AND iKey >= 454 )
OR ( TKOMCON-ATWRT+KeyTypeLOC(2) = 'XF' AND iKey >= 1150 ).
PERFORM OUT-OF-RANGE-FOUND.
ENDIF.
ENDIF.
Else.
Offset = 0.
DO.
IF offset <= 9.
offset = offset + 1.
If TKOMCON-ATWRT+Offset(1) = ':'.
KeyTypeLOC = Offset + 1.
KeyNumberLOC = Offset + 3.
EXIT.
ENDIF.
ELSE.
EXIT.
ENDIF.
ENDDO.
TRANSLATE TKOMCON-ATWRT+KeyNumberLOC(4) USING ': '.
IF TKOMCON-ATWRT+KeyNumberLOC(4) CO '0123456789 '.
iKey = TKOMCON-ATWRT+KeyNumberLOC(4).
IF ( TKOMCON-ATWRT+KeyTypeLOC(2) = 'FR' AND iKey >= 454 )
OR ( TKOMCON-ATWRT+KeyTypeLOC(2) = 'XF' AND iKey >= 1150 ).
IDAT-KWMENG = TKOMCON-ATWRT(3).
PERFORM OUT-OF-RANGE-FOUND.
ENDIF.
ENDIF.
ENDIF.
ENDLOOP.
ENDLOOP.
ENDIF.
CLOSE DATASET OUTFILE.
FORM OUT-OF-RANGE-FOUND *
FORM OUT-OF-RANGE-FOUND.
WRITE: / IDAT-VBELN.
WRITE: 10 IDAT-POSNR.
WRITE: 20 IDAT-MATNR.
WRITE: 35 IDAT-MBDAT.
WRITE: 50 IDAT-ERDAT.
WRITE: 65(3) IDAT-KWMENG DECIMALS 0.
WRITE: 75 TKOMCON-ATWRT+KeyTypeLOC(6).
IF TKOMCON-ATNAM = 'S_SK_CONSC_KEY'
OR TKOMCON-ATNAM = 'S_MK_CONSC_KEY'.
WRITE: 85 'Consecutive'.
ELSE.
WRITE: 85 'Specific'.
ENDIF.
IF TKOMCON-ATNAM = 'S_SK_CONSC_KEY'
OR TKOMCON-ATNAM = 'S_MK_CONSC_KEY'.
TYPE = 'Consecutive'.
ELSE.
TYPE = 'Specific'.
ENDIF.
* PREPARING A RECORD TO BE SENT TO FILE
CONCATENATE
IDAT-VBELN
IDAT-POSNR
IDAT-MATNR
IDAT-MBDAT
IDAT-ERDAT
C_KWMENG
TKOMCON-ATWRT+KeyTypeLOC(6)
TYPE
INTO t_record SEPARATED BY tab.
if sy-batch = 'x'.
TRANSFER t_record TO OUTFILE.
endif.
ENDFORM.
FORM TOP-OF-PAGE *
FORM TOP-OF-PAGE.
WRITE: / 'ORDER'.
WRITE: 10 'LINE'.
WRITE: 20 'MATERIAL'.
WRITE: 35 'DUE (MAD)'.
WRITE: 50 'CREATED'.
WRITE: 65 'QTY'.
WRITE: 75 'KEY'.
WRITE: 85 'TYPE'.
PREPARING A RECORD TO BE SENT TO FILE
CONCATENATE
header-ORDER
header-LINE
header-MATERIAL
header-DUE
header-CREATED
header-QTY
header-KEY
header-TYPE
INTO t_record SEPARATED BY tab.
ENDFORM.
THIS IS WORKING FINE WITH DIFFERENT RANGES BUT WHEN I USE RANGE
Sales Order 1250000 TO 2250000
MAD 01/18/2005 TO 03/02/2005
Material LOCK9250FR TO LOCK9250XF
PLANT 4500
IT GIVES THE RUNTIME ERROR I MENTIONED ABOVE
ANY HELP WOULD BE GREATLY APPRECIATED
THANKS.HI ROB YOUR REPLY LOOKS TO BE VERY CLOSE OTHER GUYS SAID IT MIGHT BE PROBLEM WITH VARIABLE C_KWMENG BUT I REMOVED THAT PIECE OF CODE WITH C_KWMENG BUT STILL I WAS GETTING THE ERROR ATTACHED IS THE COMPLETE ERROR DETAILS FROM ST22
Runtime Errors CONVT_NO_NUMBER
Exception CX_SY_CONVERSION_NO_NUMBER
Occurred on 09/29/2005 at 14:33:21
Unable to interpret "04:" as a number.
What happened?
Error in ABAP application program.
The current ABAP program "ZVXR0303" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
Error analysis
An exception occurred. This exception will be dealt with in more detail
below. The exception, assigned to the class 'CX_SY_CONVERSION_NO_NUMBER', was
not caught, which
led to a runtime error. The reason for this exception is:
The program attempted to interpret the value "04:" as a number, but
since the value contravenes the rules for correct number formats,
this was not possible.
How to correct the error
Integers are represented in ABAP using a sequence of digits and, in some
cases, a preceding sign.
The system offers the following options for displaying floating point
numbers:
[mantissa]E[sign][exponent]
[whole number part].[fractional part]
e.g. -12E+34, +12E-34, 12E34, 12.34
If the error occurred in one of your own programs or in an SAP program
that you modified, try to correct it yourself.
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"CONVT_NO_NUMBER" CX_SY_CONVERSION_NO_NUMBERC
"ZVXR0303" or "ZVXR0303"
"START-OF-SELECTION"
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
To obtain this, select the "Print" function on the current screen.
2. A suitable hardcopy prinout of the system log.
To obtain this, call the system log with Transaction SM21
and select the "Print" function to print out the relevant
part.
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, you can either use the "PRINT" command in the editor or
print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
System environment
SAP Release.............. "620"
Application server....... "grrsap54"
Network address.......... "10.80.96.102"
Operating system......... "HP-UX"
Release.................. "B.11.11"
Hardware type............ "9000/800"
Character length......... 8 Bits
Pointer length........... 64 Bits
Work process number...... 3
Short dump setting....... "full"
Database server.......... "grrsap54"
Database type............ "ORACLE"
Database name............ "D01"
Database owner........... "SAPR3"
Character set............ "en_US.iso88591"
SAP kernel............... "640"
Created on............... "Aug 28 2005 20:25:49"
Created in............... "HP-UX B.11.00 A 9000/800"
Database version......... "OCI_920 "
Patch level.............. "88"
Patch text............... " "
Supported environment....
Database................. "ORACLE 8.1.7.., ORACLE 9.2.0.., ORACLE
10.1.0.."
SAP database version..... "640"
Operating system......... "HP-UX B.11"
User, transaction...
Client.............. 050
User................ "NSHAKER"
Language key........ "E"
Transaction......... "SE38 "
Program............. "ZVXR0303"
Screen.............. "SAPMSSY0 1000"
Screen line......... 6
Information on where terminated
The termination occurred in the ABAP program "ZVXR0303" in
"START-OF-SELECTION".
The main program was "ZVXR0303 ".
The termination occurred in line 156 of the source code of the (Include)
program "ZVXR0303"
of the source code of program "ZVXR0303" (when calling the editor 1560).
Source code extract
Caution: Program has changed
Caution: At time of termination, Active source code no longer available
001260 ? TRANSLATE TKOMCON-ATWRT+KeyNumberLOC(4) USING ': '.
001270 ? IF TKOMCON-ATWRT+KeyNumberLOC(4) CO '0123456789 '.
001280 ? iKey = TKOMCON-ATWRT+KeyNumberLOC(4).
001290 ?
001300 ? IF ( TKOMCON-ATWRT+KeyTypeLOC(2) = 'FR' AND iKey >= 454 )
001310 ? OR ( TKOMCON-ATWRT+KeyTypeLOC(2) = 'XF' AND iKey >= 1150 ).
001320 ? PERFORM OUT-OF-RANGE-FOUND.
001330 ? ENDIF.
001340 ? ENDIF.
001350 ? Else.
001360 ? Offset = 0.
001370 ? DO.
001380 ? IF offset <= 9.
001390 ? offset = offset + 1.
001400 ? If TKOMCON-ATWRT+Offset(1) = ':'.
001410 ? KeyTypeLOC = Offset + 1.
001420 ? KeyNumberLOC = Offset + 3.
001430 ? EXIT.
001440 ? ENDIF.
001450 ? ELSE.
001460 ? EXIT.
001470 ? ENDIF.
001480 ? ENDDO.
001490 ?
001500 ? TRANSLATE TKOMCON-ATWRT+KeyNumberLOC(4) USING ': '.
001510 ?
001520 ? IF TKOMCON-ATWRT+KeyNumberLOC(4) CO '0123456789 '.
001530 ? iKey = TKOMCON-ATWRT+KeyNumberLOC(4).
001540 ? IF ( TKOMCON-ATWRT+KeyTypeLOC(2) = 'FR' AND iKey >= 454 )
001550 ? OR ( TKOMCON-ATWRT+KeyTypeLOC(2) = 'XF' AND iKey >= 1150 ).
? IDAT-KWMENG = TKOMCON-ATWRT(3).
001570 ? PERFORM OUT-OF-RANGE-FOUND.
001580 ? ENDIF.
001590 ? ENDIF.
001600 ? ENDIF.
001610 ? ENDLOOP.
001620 ? ENDLOOP.
001630 ? ENDIF.
001640 ? CLOSE DATASET OUTFILE.
001650 ?
001660 ? *----
001670 ? * FORM OUT-OF-RANGE-FOUND *
001680 ? *----
001690 ? * ........ *
001700 ? *----
001710 ? FORM OUT-OF-RANGE-FOUND.
001720 ?
001730 ? WRITE: / IDAT-VBELN.
001740 ? WRITE: 10 IDAT-POSNR.
001750 ? WRITE: 20 IDAT-MATNR.
Contents of system fields
SY field contents..................... SY field contents.....................
SY-SUBRC 0 SY-INDEX 44
SY-TABIX 7 SY-DBCNT 1
SY-FDPOS 4 SY-LSIND 0
SY-PAGNO 2 SY-LINNO 18
SY-COLNO 94 SY-PFKEY
SY-UCOMM SY-TITLE Out of Range Keys
SY-MSGTY I SY-MSGID SF
SY-MSGNO 616 SY-MSGV1
SY-MSGV2 SY-MSGV3
SY-MSGV4
Active calls / events
No.... Type........ Name..........................
Program
Include Line
Class
1 EVENT START-OF-SELECTION
ZVXR0303
ZVXR0303 156
Chosen variables
1 EVENT START-OF-SELECTION
ZVXR0303
ZVXR0303 156
%_SPACE
2
0
SY-REPID ZVXR0303
5555333322222222222222222222222222222222
A682030300000000000000000000000000000000
TKOMCON-ATWRT 04:XF1260
333543333222222222222222222222
04A861260000000000000000000000
KEYNUMBERLOC 5
0000
0005
SYST-REPID ZVXR0303
5555333322222222222222222222222222222222
A682030300000000000000000000000000000000
SY-LDBPG SAPDB__S
5454455522222222222222222222222222222222
31042FF300000000000000000000000000000000
IKEY 1260
000E
004C
KEYTYPELOC 3
0000
0003
SY ###,####################################
0002000000000001000000000000000000000000
000C00020007000E00000001000A000000000000
... + 40 ###########^###<########################
0000000000050003000100080000000000000009
00010004000E000C000200040000000000000000
... + 80 ########################################
0000000000000000000000000000000000000000
0000000000000000000A00000000000000000000
... + 120 #######################################_
0000000000000000000000000000000000010005
00000000000000000000000000000000000A000F
... + 160 ############ÿÿ¹°XC############# E2 X1
000000000000FFBB540000000000000222432253
0000000A0000FF90830040000C0000C000520081
... + 200 000 ####__S 050
3332222222220000555222222222222222223332
0000000000000000FF3000000000000000000500
... + 240 00
222223322222222
000000000000000
SVBELN IBT00012500000002250000
44533333333333333333333
92400012500000002250000
IDAT-KWMENG ########
00000000
0000000C
TKOMCON-ATWRT+0(3) 04:
333
04A
SYST ###,####################################
0002000000000001000000000000000000000000
000C00020007000E00000001000A000000000000
... + 40 ###########^###<########################
0000000000050003000100080000000000000009
00010004000E000C000200040000000000000000
... + 80 ########################################
0000000000000000000000000000000000000000
0000000000000000000A00000000000000000000
... + 120 #######################################_
0000000000000000000000000000000000010005
00000000000000000000000000000000000A000F
... + 160 ############ÿÿ¹°XC############# E2 X1
000000000000FFBB540000000000000222432253
0000000A0000FF90830040000C0000C000520081
... + 200 000 ####__S 050
3332222222220000555222222222222222223332
0000000000000000FF3000000000000000000500
... + 240 00
222223322222222
000000000000000
OUTFILE /usr/users/ftpsapfi/locks_540318
2777277677267776766266667533333322222222
F532F53523F64031069FCF3B3F54031800000000
... + 40
2222222222
0000000000
Application Calls
No dump information available
Application Information
No dump information available
Internal notes
The termination occurred in the function "ab_Move" of the SAP
Basis System, specifically in line 529 of the module
"//bas/640_REL/src/krn/runt/abmove1.c#6".
The internal operation just processed is "MOVE".
The internal session was started at 20050929142552.
Active calls in SAP kernel
( 0) 0x4000000001751924 CTrcStack2 + 0x2bc dw.sapD01_DVEBMGS00
( 1) 0x4000000001751658 CTrcStack + 0x18 dw.sapD01_DVEBMGS00
( 2) 0x4000000001db7478 rabax_CStackSave__Fv + 0x100 dw.sapD01_DVEBMGS00
( 3) 0x4000000001dc3abc ab_rabax + 0x1e1c dw.sapD01_DVEBMGS00
( 4) 0x4000000001b44cb4 ab_cnverr__FiPcPCvN21T2 + 0x18c dw.sapD01_DVEBMGS00
( 5) 0x40000000016c96f8 ab_Move + 0x1910 dw.sapD01_DVEBMGS00
( 6) 0x40000000016d4434 ab_jmove__Fv + 0x384 dw.sapD01_DVEBMGS00
( 7) 0x4000000001022348 ab_extri__Fv + 0x17a0 dw.sapD01_DVEBMGS00
( 8) 0x4000000001726dc8 ab_xevent__FPCc + 0x38 dw.sapD01_DVEBMGS00
( 9) 0x40000000019f7efc ab_trigg__Fv + 0x94 dw.sapD01_DVEBMGS00
(10) 0x40000000019dc9ec ab_run + 0xc4 dw.sapD01_DVEBMGS00
(11) 0x4000000000f65e0c N_ab_run + 0x14 dw.sapD01_DVEBMGS00
(12) 0x4000000000f5fa88 dynpmcal + 0x198 dw.sapD01_DVEBMGS00
(13) 0x4000000000f5d500 dynppai0 + 0x830 dw.sapD01_DVEBMGS00
(14) 0x4000000000f5b8b4 dynprctl + 0x43c dw.sapD01_DVEBMGS00
(15) 0x4000000000f56728 dynpen00 + 0x2118 dw.sapD01_DVEBMGS00
(16) 0x400000000102f1b4 Thdynpen00 + 0x69c dw.sapD01_DVEBMGS00
(17) 0x400000000102e1e4 TskhLoop + 0x523c dw.sapD01_DVEBMGS00
(18) 0x4000000001022f50 tskhstart + 0x1e0 dw.sapD01_DVEBMGS00
(19) 0x4000000000dce3c4 DpMain + 0x484 dw.sapD01_DVEBMGS00
(20) 0x40000000022784cc nlsui_main + 0x14 dw.sapD01_DVEBMGS00
(21) 0x4000000000a39534 main + 0x14 dw.sapD01_DVEBMGS00
(22) 0xc00000000000a588 $START$ + 0xa0 /usr/lib/pa20_64/dld.sl
List of ABAP programs affected
Type Program Gen. Date Time Load Size
Prg ZVXR0303 09/29/2005 14:25:42 39936
Prg SAPMSSY0 05/01/2005 00:21:19 66560
Prg SAPMSSYD 06/05/2002 17:09:33 16384
Prg SAPFSYSCALLS 02/14/2002 14:22:47 6144
Prg RSDBRUNT 06/13/2004 00:43:20 226304
Typ RSSCR / / : m:15 5120
Prg RSDBSPBL 01/07/2003 18:47:02 59392
Prg SAPDB__S 02/14/2002 14:22:47 15360
Typ VARID 05/12/1997 16:51:30 4096
Prg %_CSYDB0 02/14/2002 14:22:46 28672
Prg RSDBSPVA 09/06/2005 22:54:22 112640
Prg SAPLSVAR 09/06/2005 22:57:28 625664
Typ VARIS 05/12/1997 15:27:21 2048
Typ RSVAMEMKEY 05/07/1997 13:07:49 2048
Prg RSDBSPMC 06/05/2002 17:09:26 66560
Typ DDSHDESCR 09/03/1997 03:05:16 3072
Typ SPPARAMS 05/07/1997 13:10:38 2048
Typ SPPARAMS 05/07/1997 13:10:38 2048
Typ RSSELINT 04/04/1995 16:12:37 2048
Prg SAPLICON 03/12/2004 06:57:52 23552
Prg %_CICON 02/14/2002 14:22:46 65536
Prg SAPLSABE 02/14/2002 14:22:47 11264
Prg SAPLSECU 05/23/2005 14:04:05 64512
Typ RSSUBINFO 10/14/1999 22:01:03 3072
Prg %_CRSDS 02/14/2002 14:22:46 8192
Typ RSDSEXPR 08/20/1998 10:57:18 2048
Prg SAPLDSYA 02/14/2002 14:22:47 39936
Prg SAPFSDS1 01/07/2003 18:32:17 47104
Typ TDCLD 11/02/1998 09:51:35 5120
Prg SAPLSDOD 04/30/2005 22:53:50 39936
Typ DOKIL 05/12/1997 16:46:17 3072
Prg SAPCNVE 02/14/2002 14:22:47 6144
Prg SAPLLANG 02/14/2002 14:22:47 8192
Typ T002 02/14/1998 10:24:58 2048
Typ RSEXFCODE 08/13/1997 12:52:57 1024
Prg SAPFSPOR 03/13/2004 19:20:44 12288
Prg SAPLOMCV 05/01/2005 00:14:10 16384
Prg CL_EXITHANDLER================CP 06/13/2004 00:40:58 26624
Prg SAPLSEXV 09/06/2005 22:55:26 107520
Prg CL_BADI_FLT_DATA_TRANS_AND_DB=CP 05/01/2005 00:21:35 33792
Typ SXS_ATTR 08/20/2001 12:23:27 4096
Typ V_EXT_ACT 11/09/2000 14:27:05 2048
Typ SXC_EXIT 11/09/2000 14:23:43 2048
Prg CL_EX_BADI_MATN1==============CP 05/01/2005 00:14:04 22528
Prg IF_EX_BADI_MATN1==============IP 06/13/2004 00:48:55 4096
Typ TMCNV 02/24/1999 03:33:25 3072
Prg SAPLSCNT 02/14/2002 14:22:47 24576
Typ DYCBOX 08/20/1998 11:16:53 2048
Prg SAPLSVSM 01/07/2003 18:35:45 22528
Prg SAPLSGUI 01/09/2003 17:15:12 31744
Prg SAPLSTTM 05/01/2005 00:24:04 75776
Prg SAPLSBDC 05/23/2005 14:05:19 38912
Prg CL_DATAPROVIDER===============CP 02/14/2002 14:22:46 40960
Prg %_CCNTL 02/14/2002 14:22:46 13312
Typ OBJ_RECORD 02/14/1998 08:30:43 2048
Prg SAPLSTUP 05/23/2005 14:03:46 65536
Prg SAPLCNDP 05/23/2005 14:05:47 167936
Prg SAPFGUICNTL 01/09/2003 17:18:52 20480
Prg SAPLOLEA 05/23/2005 14:03:56 79872
Prg SAPLSFES 09/06/2005 22:53:55 191488
Prg SAPLSPLUGIN 02/14/2002 14:22:48 6144
Typ ARFCRDATA 11/09/2000 14:04:16 6144
Prg SAPLGRFC 02/14/2002 14:22:47 13312
Typ SWCBCONT 11/15/2000 17:55:11 3072
Typ OLE_VERBS 04/04/1995 16:02:20 2048
Typ OLE_PA 04/04/1995 16:02:19 2048
Prg SAPSHDTV 03/12/2004 06:40:27 28672
Typ SSCRTEXTS 09/03/1997 03:12:33 3072
Typ SSCRFIELDS 05/13/1997 12:54:26 4096
Prg CL_GUI_PROPS_CONSUMER=========CP 01/07/2003 18:26:56 26624
Prg SAPLTHFB 09/06/2005 22:52:48 306176
Prg CL_DYNAMIC_GUI_EXTENSIONS=====CP 02/14/2002 14:22:46 33792
Prg CL_GUI_DATAMANAGER============CP 05/01/2005 00:20:36 70656
Prg CL_ABAP_CHAR_UTILITIES========CP 05/01/2005 00:14:49 11264
Prg RSDBSPVD 05/01/2005 00:15:44 73728
Typ RVARI 03/30/1998 09:40:50 4096
Typ RSVARIVDAT 04/04/1995 16:12:54 2048
Typ VBEP 01/27/2003 16:50:17 10240
Typ VBAP 09/15/2005 11:15:36 44032
Prg SAPLCEI0 09/22/2005 14:34:40 936960
Typ API_VALUE 02/20/1998 08:46:47 2048
Prg SAPLCUEV 06/07/2001 18:26:56 10240
Prg SAPLSUNI 06/13/2004 00:42:30 131072
Typ TFDIR 07/29/1998 19:49:08 3072
Prg %_CIBCO2 03/13/2004 14:32:13 12288
Typ IBINCOM 06/01/1999 11:56:27 3072
Typ IBINCONF 06/01/1999 11:56:27 2048
Typ IBSTCONF 06/01/1999 11:56:28 1024
Prg SAPLCUCB 05/23/2005 15:20:17 192512
Typ TCUIBSPECIAL 06/07/2001 17:50:37 1024
Prg %_CIBXX 03/13/2004 14:38:45 49152
Typ BAL_S_MSG 12/04/2000 13:04:01 6144
Prg CX_CBASE_ERROR================CP 01/27/2003 16:58:10 10240
Typ SCX_SRCPOS 11/09/2000 14:12:15 2048
Typ BAL_S_CONT 11/02/1998 09:43:07 2048
Typ BAL_S_PARM 12/04/2000 12:45:14 3072
Typ BAL_S_CLBK 11/02/1998 09:43:07 2048
Prg CX_STATIC_CHECK===============CP 02/14/2002 14:22:47 8192
Prg CX_ROOT=======================CP 02/14/2002 14:22:47 9216
Prg CL_CBASE======================CP 05/23/2005 15:19:44 87040
Typ T371G 04/29/1998 10:42:48 2048
Prg SAPLIBCO 03/13/2004 15:32:40 269312
Prg %_CIBCO 03/13/2004 14:38:45 11264
Prg SAPLIBXX 03/13/2004 14:38:46 11264
Prg SAPLIBIBF 03/13/2004 14:38:46 179200
Prg %_CIBIB 03/13/2004 14:38:45 18432
Prg SAPLIBINF 06/12/2004 22:20:22 415744
Prg %_CIBIN 03/13/2004 15:32:40 48128
Prg CL_IBASE_STRUC================CP 06/07/2001 19:59:10 106496
Prg %_CIBST 03/13/2004 14:38:45 37888
Prg CL_IBASE_STRUC_BUF============CP 06/07/2001 19:59:10 89088
Prg CL_IBASE_STRUC_STAT===========CP 06/07/2001 19:59:10 8192
Prg CL_IBASE_STRUC_BUF_IBSTREF====CP 06/07/2001 19:59:10 35840
Prg %_CIBCO1 03/13/2004 14:38:45 14336
Typ IBINVAL 09/18/2001 10:02:52 2048
Prg SAPLIBCU 03/13/2004 14:38:46 12288
Prg SAPLIBCUT 06/07/2001 18:27:19 12288
Typ T371B 05/14/1998 22:58:43 2048
Typ V_IBINR 03/13/2004 15:32:40 5120
Typ V_IBINR_CM 03/13/2004 15:32:40 5120
Prg CL_IBASE_SERVICE==============CP 06/07/2001 19:59:10 13312
Prg CL_IBASE_T371D_BUF============CP 06/07/2001 19:59:10 12288
Typ T371D 08/27/1999 18:19:44 2048
Prg CL_IBASE_R3_MATERIAL==========CP 05/23/2005 15:08:24 59392
Typ MARA 05/23/2005 15:08:18 22528
Typ MAKT 08/28/1997 08:52:19 2048
Typ ICON 01/03/1996 15:34:02 3072
Prg CL_ABAP_TYPEDESCR=============CP 05/01/2005 00:20:10 21504
Prg CL_ABAP_ELEMDESCR=============CP 05/01/2005 00:20:33 20480
Prg CL_ABAP_DATADESCR=============CP 03/12/2004 07:16:33 14336
Prg CL_ABAP_REFDESCR==============CP 03/12/2004 07:17:23 16384
Prg CL_ABAP_STRUCTDESCR===========CP 05/01/2005 00:20:33 20480
Prg CL_ABAP_COMPLEXDESCR==========CP 03/12/2004 07:16:33 13312
Prg CL_ABAP_TABLEDESCR============CP 03/12/2004 07:17:23 17408
Prg CL_ABAP_CLASSDESCR============CP 03/12/2004 07:17:23 23552
Prg CL_ABAP_OBJECTDESCR===========CP 03/12/2004 07:17:23 25600
Prg CL_ABAP_INTFDESCR=============CP 03/12/2004 07:16:33 19456
Prg CL_ABAP_SOFT_REFERENCE========CP 03/29/2001 16:42:12 7168
Prg CL_ABAP_REFERENCE=============CP 02/14/2002 14:22:46 6144
Prg IF_EX_CM_BADI_VERSION=========IP 01/07/2002 16:09:04 3072
Prg %_CABAP 01/07/2003 18:31:23 23552
Typ SXS_INTER 11/30/1998 15:55:16 2048
Prg CL_EX_CM_BADI_VERSION=========CP 05/01/2005 00:14:04 13312
Prg %_CSXRT 06/13/2004 00:40:55 11264
Prg CL_EXIT_MASTER================CP 06/13/2004 00:40:58 13312
Typ V_EXT_IMP 11/09/2000 14:27:05 2048
Typ V_EXT_IMP 11/09/2000 14:27:05 2048
Typ SXC_IMPSWH 11/09/2000 14:23:44 2048
Prg CL_IM_CM_BADI_VERSION_DEF=====CP 04/17/2002 11:01:00 6144
Prg SAPLASTAT_TRIG 02/14/2002 14:22:47 11264
Typ ASTAT_TYP2 11/10/1998 05:35:18 2048
Prg IF_CM_BASELINE================IP 05/23/2005 15:08:24 9216
Prg IF_IBASE_IBOF_TREE_OBJECT=====IP 05/23/2005 15:08:24 5120
Prg IF_IBASE_INSTALL==============IP 06/07/2001 20:08:54 4096
Prg IF_IBASE_MATERIAL=============IP 06/07/2001 20:08:54 3072
Prg IF_IBASE_OBJECT===============IP 06/07/2001 20:08:54 4096
Prg SAPLBOMA 02/14/2002 14:15:40 10240
Typ IONRA 03/12/2004 02:09:40 23552
Typ IBIBCOM 08/30/2001 17:56:57 4096
Typ IBIB 03/13/2004 14:32:13 5120
Prg CL_IBASE_STRUC_SERVICE========CP 06/07/2001 19:59:10 17408
Prg CL_CU_CBASE_ENQUEUE_CORE======CP 06/07/2001 19:58:59 11264
Prg CL_CU_CBASE_ENQUEUE===========CP 06/07/2001 19:58:59 16384
Typ T371F 06/01/1999 12:00:49 2048
Typ V_IBIN_SYVAL 03/13/2004 15:32:41 4096
Typ IBIN 09/18/2001 10:02:52 6144
Typ IBINOWN 02/01/2000 14:56:07 2048
Prg CL_IBASE_T371F_BUF============CP 06/07/2001 19:59:11 8192
Prg CL_IBASE_STRUC_FILT_02========CP 06/07/2001 19:59:10 11264
Prg CL_IBASE_STRUC_FILT===========CP 06/07/2001 19:59:10 10240
Typ IBST 09/18/2001 10:02:52 4096
Typ IBST 09/18/2001 10:02:52 4096
Typ IBSTREF 04/15/1998 00:20:43 2048
Typ IBSTREF 04/15/1998 00:20:43 2048
Prg IF_CBASE_E====================IP 06/07/2001 20:08:25 3072
Prg %_CCXTAB 02/14/2002 14:22:46 6144
Prg SAPLCUCQ 09/15/2005 11:15:38 79872
Typ CUCO 09/18/2001 10:02:34 18432
Typ CUCO_OBJ 09/18/2001 10:02:34 18432
Prg SAPLCLCA 09/06/2005 23:33:29 68608
Typ TCLA 03/13/2004 14:10:20 5120
Typ TCLAO 08/13/1997 13:57:22 4096
Prg SAPLCUOB 05/23/2005 14:31:35 31744
Typ INOB 09/03/1997 03:20:02 4096
Prg SAPLCLSE 05/23/2005 14:32:26 167936
Prg %_CCC01 05/01/2005 00:34:57 53248
Typ TABLEKEY 07/06/1998 21:01:06 2048
Typ KSSK 09/18/2001 10:02:58 3072
Prg SAPLCLEF
Maybe you are looking for
-
Section Code details not captured at the time of vendor clearing
Hi Experts ! I am facing problem in clearing of vendors accounts through F-44 or F-54 . The problem is creating with those vendors accounts which having withholding tax. Error massage is (Fill Section Code) At the posting of down payment and invoici
-
How to view execution history for any date in oracle SQL developer tool ?
hi, i want to view some executed queries(2 months before) in oracle SQL Developer. if i press F8 it shows execution history for only last 30 days. is there any option(query) or something to view execution history for specific date ? i want to see som
-
Hi, Im trying to create a ipa file from an swf created in Flash Builder Burrito using Flex Hero. Im using ./pfi.bat -package -target ipa-test -provisioning-profile FlexProfile.mobileprovision -storetype pkcs12 -keystore Certificates.p12 pass MyFlexAp
-
OS X 10.9.3, Mail sounds gone
Hitting "Send" for a message in OS X mail (Version 7.3 (1878.2): My normal "swoosh" sound that used to confirm that an email was been sent has gone silent. Where do I set things to get it back? It's trivial, but I miss it.
-
Formatted Search - Error in code
I have the following formatted search to calculate the Sqm Mtr Qty in SAP on my Purchase Order: {SELECT ($[POR1.U_QTY.NUMBER] * ($[POR1.U_LEN.NUMBER]/1000)) * ($[POR1.Width1.NUMBER]/1000)} I then tried the other way via {SELECT (convert(float,$[POR1