Cyan Highlight Behind Text in Design Pane

Hi, Could anyone tell me why some of my pages have a cyan colored highlight behind the text in the design pane. It does not happen to all of my sites and am wondering why this particular site that is doing this, is doing his.
File is a .asp extension, but other asp pages for other sites do not do this. Have checked code rewriting in prefs and do not see an instance where cyan is supposed to be implemented behind text. It's not in the style either and live page looks fine.
Considered putting this thread go in App Dev forum instead but seems a general DW useablity issue as opposed to a dev issue. Please let me know if I should resubmit there.
Using DW CS4 on 64 Bit Vista. What other details can I provide??
thanx,
jeff

jeffo1477 wrote:
Hi, Could anyone tell me why some of my pages have a cyan colored highlight behind the text in the design pane.
The cyan highlighting indicates untranslated live data on a page that contains server-side code. Normally, it is applied only to dynamic text like this:
If it's being applied to ordinary text, it suggests there's something unusual about your server-side code that's causing Dreamweaver to highlight the text in this way. The preference that controls the colour of the highlighting is in the Highlighting category of the Preferences panel.

Similar Messages

  • Yellow Highlights Behind Text

    Hi,
    I'm relatively new to InDesign and I've opened up some files sent to me. Some of the text is highlighted. Can you explain why this might be? What eliminates this?
    Thank you!

    Hey!
    InDesign does a bunch of highlighting for different warnings. Here are the main ones:
    Pink highlighting means the highlighted font is missing. Very bad.
    Amber highlighting means you've got substituted glyphs. That just means that if you typed something and changed the case to small caps, InDesign will substitute a real version of small caps for the formatted one provided your system has it.
    There are 3 shades of yellow that indicate hyphenation & justification violations depending on how severe they are.
    Also, a bright yellow indicates Keeps violations and Green highlighting means you have weird kerning or tracking.
    Does that help? :-)
    Check your preferences under Composition. You can turn off the ones you don't want highlighted. I turn off everything except Substituted Fonts (you definitely want to know when the fonts are missing, but the other stuff is according to your own preferences).
    I think there's an article around here somewhere on this (I wrote down those color definitions in my notebook). I'll see if I can find it.
    Phyllis

  • Anchored objects behind text

    Is there a way to make an anchored box sit behind text? I have a section title with section numbers. I would like to place a piece of art behind all the section numbers. The box always comes out on top. I can create a new paragraph style with autonumbering for the section into it, place it over the art, group it, and then anchor it. The only problem is, now the section numbers won't show up in the running head. Any ideas? I'm using CS3. I used to be able to do this in FrameMaker. Thanks.

    Can't be done with anchored objects - sorry.
    But you can convert your text to a table - and that can put a background in there.
    OR
    Use Paragraph Rules to highlight a line of text or a pargraph of text
    http://www.theindesigner.com/blog/episode-49-paragraph-rules-rule

  • How to highlight & copy text from Lightning address book, versus having to open the entry?

    That I can tell, it isn't possible to highlight & copy text visible in the Contact Pane or the pane above it, the one with all the address book entries. Am I missing a way to do this?
    It would sure make the use of the address book in Lightning a lot more convenient & quicker to use if one could do so. Please note I did not say edit. Instead, one is required to go through all the same steps as if editing. That is, open Properties & select the appropriate tab, then highlight & copy said information, instead of just being able to quickly copy the desired text.
    It's only two more clicks, & the finding of the text, which can be cumbersome in some of the small field windows, especially for notes, but when doing this often, it sure becomes a pain. Notes in particular becomes a mini database for that address entry, whether it be your personal record for product information for something purchased (which could be extensive if many of the parts of something like a specific computer were noted), to sharing contact information with others.
    A third use is when having to retrieve security information that is impossible to remember, such as your BTC account(s). By keeping it in the address book on an at-home computer, adds a bit more security, yet you can still easily access it.

    The add on More Functions for Address Book allows several copy functions.
    https://nic-nac-project.org/~kaosmos/morecols-en.html

  • Images Behind Text in RTF Template

    While creating a few rtf templates, I noticed that if an image is to be shown behind text then the image will not render to back to .rtf by bi pub.
    If I put the image inline with text, it renders just fine.
    Am I missing a step that would allow me to render the image behind text or is it just working as intended?
    Oracle BI Publisher 10.1.3.4.1
    Thank you.
    Edited by: Crawler409 on Dec 17, 2010 2:49 PM
    Edited by: Crawler409 on Dec 17, 2010 2:50 PM

    Hi
    Can you pl. send me the RTF template and sample XML. I will try to fix the template.
    Thx
    chundi ([email protected])

  • How to highlight a text in Pqges?

    Hi, does anyone knows how to highlight a text in Pages for iPad??

    If you would like to see this very basic function added to Pages for iOS in the future, let the good folks at Apple know of your needs:
    http://www.apple.com/feedback/

  • TS3899 I recently discovered that I can no longer access websites pointed to within the content of an email message on my iPad Air by clicking on the highlighted HTML text or symbols. What should I do to correct this issue?

    I recently discovered that I can no longer access websites pointed to within the content of an email message on my iPad Air by clicking on the highlighted HTML text or symbols. What have I done to create, and what should I now do to correct, this issue?

    Or you could include a width to your body style:
    body {
    background-image: url(Logo/sky1.jpg);
    background-position: center center;
    background-attachment: fixed;
    width: 75%;}
    It might work or not depending on your other color scheme.

  • Acrobat 9 Pro: Cannot copy highlighted text unless I un-highlight the text

    I have highlighted text in a document. When I go to copy that same text, it selects the entire sentence. I right-click, the menu starts with "Set Status." There is no "copy" option. Neither is control-C successful. When I next paste, it pastes a previously selected text, not the text I am attempting to copy in Acrobat. The only way I have found to copy the highlighted text is to un-highlight it, and then copy it. Are there any other solutions?
    Thanks!

    Thank you! This works. I pressed "shift," then highlighted the text I want to copy, and right-click (while still holding down "shift" key), and "Copy" finally appears in the menu.

  • How to edit text in design mode - i.e get an I cursor instead of arrow

    DW CS6 This is a very basic unclear on concept question. I normally work in code view and have no problems. Sometimes there is a large block of text within a paragraph which is in a div.
    I would like to correct a simple typo or insert some more text directly from the design mode display. However, almost all the time, when I click on the spot I want to modify, the cursor remains an arrow and the entire div gets a yellow border. I still have the select arrow, not the vertical bar I need to edit.
    Sometimes I seem to stumble onto the right set of clicks and get the edit bar.
    Thanks for any suggestions.

    Design View can get pretty cranky when your code has errors.
    Check the validator at http://validator.w3.org and make sure you're working with clean code before resorting to wiping preferences, config folders or reinstalling.
    If your code is clean and it's still not allowing you to click your text in Design View, you may have a z-indexing issue. I notice on pages that use a lot of positioning (APDivs) you can accidentally cover up your text boxes with blank/transparent areas of other elements and cause problems when trying to access that text at a later date.
    It's all guesswork though without seeing your actual page.
    Could you post a link?

  • How to highlight a text in Adobe reader plugin uisng code?

    I am using VC++ to create tyhe Activex control( Adobe Reader plugin). Through code I am able to view the pdf. But now i want to highlight some text in the reader. Is it possible to do it.

    Is it not possible to create highlight annotations using the SDK? At any rate, you should ask over at the Acrobat SDK forum...

  • How to change the color of letters instead of highlight the text when compare two documents

    Hello!!
    I have the Adobe Acrobat 9 Pro (Versión 9.0.0) and I need to compare two documents, but I want to show the diferences changing  the color of letters instead of highlight the text with any color. My boss tell me that other Acrobat version have this option, but I couldn't find it in this version.
    Could you help me on this topic??
    Thanks

    Hello!!
    I have the Adobe Acrobat 9 Pro (Versión 9.0.0) and I need to compare two documents, but I want to show the diferences changing  the color of letters instead of highlight the text with any color. My boss tell me that other Acrobat version have this option, but I couldn't find it in this version.
    Could you help me on this topic??
    Thanks

  • Selecting Graphics Behind Text

    Hello,
    I’m using Pages ’08 and working with a neat, layered, grouped graphic. There are three layers: a dark background graphic, a lighter middle graphic, and white text in a text box on top. All three use the exact same dimensions and are stacked one on top of the other for a total of three layers, grouped. None of the layers cause wrap.
    I’d like to select one of the graphics to edit the color and find that I cannot do it without ungrouping the items, moving the text layer out of the way, applying the new color, putting the text layer back in place, and then regrouping everything. It seems like unnecessary steps. It seems as if I should be able to use a modifier key and do a series of clicks to activate the layer that I want, much like when I used QuarkXPress and InDesign. Is there a similar key stroke in Pages?
    The user’s manual says “To select a floating object that’s behind text, place the pointer outside the text area, press the Command key, and then drag across the page until the object’s selection handles appear.” That doesn’t solve my concern, though.
    I've attached a sample of what my graphic looks like. It would be great if there were key strokes to use. If not I'll have to go back to each instance of the graphic and make changes to each one.
    Please let me know if you have an idea of how to make this work.
    Thanks,
    Scott

    Pages does not have any modifier keys to click down through layers like other DTP software.
    Unlocking and staggering the layers is the only way. There is an averaging command that does however let you centre them back on top of each other.
    Peter
    Greetings from sunny Broome.

  • Send object behind text

    Can you send an object behind text in the Ipad pages app so that the text is over the top of the object?

    After some researching I found it more productive to use a
    textArea component.
    One reason was the UIScrollBar is attached to it so
    dynamicallt resizing and moving is a breeze.
    I looked into the movieclip method swapDepths() to change the
    depth of movieclips and found
    it may be useful down the road.
    The main point of this thread was the dynamic UIScrollBar
    sitting on top of the area when created.
    With a dynamic textArea it positions itself acording to the
    Layer hiarcy. Add setSyles and there is
    no reason I see to use Dynamic text unless for less
    overhead???
    Thankyou kglad for you input!

  • I need to highlight selected text in a pdf document

    I need to highlight selected text in a pdf document

    Looks like that the document is protected.
    Why did you post this in the forum for Feature Requests?

  • A problem highlighting/selecting text in Illustrator CS3

    In several instances I can't highlight text to copy or to edit, other times it works fine. If I click the radio button for the text in layers (other layers may be locked to prevent accidental selection), the baselines appears and I should be able to highlight the text, but I can't. If I highlight some other unaffected area of text successfully (unlocked layers), sometimes it will allow me to select the problem text directly after. Then it will go back to being a problem, why?

    I'm using the general text tool, I've locked the other sublayers to avoid accidentally selecting those items. Then I click the radio button on the sublayer I wish to edit or copy, which reveals the baselines. Then if I click within that object to highlight text with the cursor, the text tool creates a new textbox/sublayer and does not highlight the text I intended.
    From: Monika Gause <[email protected]<mailto:[email protected]>>
    Reply-To: <[email protected]<mailto:[email protected]>>
    Date: Wed, 26 Oct 2011 14:49:40 -0600
    To: Roger Daleiden <[email protected]<mailto:[email protected]>>
    Subject: A problem highlighting/selecting text in Illustrator CS3
    Re: A problem highlighting/selecting text in Illustrator CS3
    created by Monika Gause<http://forums.adobe.com/people/Monika+Gause> in Illustrator - View the full discussion<http://forums.adobe.com/message/3992086#3992086

Maybe you are looking for