Cyberlink power dvd not playing movies

My cyberlink power dvd will not play movie disk. My computer is HP2000 2b16nr notebook pc. thank you!

Hi scarlettclayton,
Welcome to the HP Support Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I saw your post regarding your Cyberlink Power DVD will not play a movie. I will be happy to help you with that but I will need more information then what you provided. Is this a DVD or a Blu-Ray? Are you getting an error message at all? What operating system are you using?
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Similar Messages

Power DVD not playing DVD

I was able to play a particular DVD on Monday - I just inserted the DVD disk and it played it. Today I insert the disk, and Power DVD 12 opens, but it doesn't do anything!
What am I doing wrong?
I am on a brand new Toshiba laptop with Windows 8.1
I'm not in love with Windows 8.1 yet!

Nevermind - I restarted my laptop (for the first time in over 2 days) and it worked fine!

DVD from Elements 3.0 has no audio on Cyberlink Power DVD

I've burnt a DVD from Elements 3.0 which seems to go okay but when I put the DVD back in to the drive and open Cyberlink Power DVD, it plays without audio.
What's the griff with that?
Chummy

As a test of what Steve wrote, go back to PE, and Burn to Folder. Point CyberLink Power DVD to that folder and play from there. Do you get Audio?
I'm with Steve in that PE does a good, DVD-spec AC3 Audio file, that *should* play fine. CyberLink Power DVD is a good software player.
If you are not getting Audio, first place I'd check was the Audio setup on my system and then Ctrl-c from within Power DVD. What are the settings under the Audio tab there?
Good luck,
Hunt

Playing dvd's with cyberlink power dvd

Hi,
Just purchased new notebook today, can't get dvd's to play at all.....am trying with the cyberlink power dvd12 but its not playing out at all.
I've tried several dvds to make sure its not the dvd's - its reading the dvds when placed in the drive but not loading with the cyberlink power dvd......have it set to auto play
Any help appreciated please
Thanks

Hi,
For the very first time, please use CyberLink software to load a DVD.
After the first time, it should load other DVD's.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Cyberlink power DVD activation key.

Hello.
I have played DVDs on this Satellite C75D-A7102 before but now the Cyberlink app (Toshiba installed) Said I need an activation key to start the app. Win 8.1 with AMD A6 chip. How can I get this activation key? Cyberlink power DVD is not listed in the add/remove programs list but it was loaded from the factory. DVDs used to autoplay but do not anymore.
Thank you in advance.
Pete

Satellite C75D-A7102 Specifications
Satellite C75D-A7102 Support Page
Pete
I have no solution to your specific problem. Your specifications above make no mention whatsoever of Cyberlink. What is mentioned, is the 'Toshiba Media Player by sMedio Truelink+'. Given Cyberlink is NOT listed as an included software with your system, even as 'Trial Software', regardless of your assertion that it was factory loaded, I don't see there being any chance of obtaining an activation code for it.
Try the Toshiba Media Player instead. Personally, I like VLC Player, and I never have problems playing DVDs, CDs, MP3s, etc, or any kind of audio/visual media with it.
With regard to Autoplay, if it has in fact become disabled on your laptop, I would strongly advise you to leave it that way. One of the main ways viruses propagate themselves is through USB flash drives, burned CDs/DVDs and any portable/removable media. The infected machine puts the virus on the removable media, often using Auotplay to do so, and when that media is then put in any other un-infected machine, the virus can then use Autoplay to infect this unit. Disabling Autoplay is one way to help prevent the spread of viruses.
Mike

Some DVDs not playing in my iMac, need help!

some orginial / genuine DVDs not playing in my iMac, need help!

Once your husband copied the movies, did he use a burn software to burn them to a DVD? You need to use a burn software to properly encode the footage so it'll play in any DVD player/computer/TV. So, once the movie is copied to your hard drive, you can edit it in iMovie (may need a converter first to get it into a format iMovie can work with such as MPEG Streamclip); after you're done in iMovie, use iDVD if you have it or Roxio Toast to burn it to a DVD.
And for the OP: Regions are different depending on where the movie was made: the US, Europe, etc. The regions are set within DVD player - you insert a DVD and the player reads what region it originated in. Please note you can only change regions 5 x; after the 5th, that setting will remain and can't be changed again.

Cyberlink power dvd error!

PLEASE HELP... I have been reading the reviews/forum about the error on cyberlink power dvd.. So i followed the steps to uninstall it. Now i can not find the link to reinstall it. Please help i am unable to watch any dvds on my laptop!!! Thanks

Hi,
Try using Recovery Manager to reinstall your original version of Cyberlink PowerDVD - the procedure for using recovery manager to reinstall Software and Drivers is detailed in the document on the link below.
Reinstall Software Using Recovery Manager - Windows 8.
After the reinstallation has completed, restart the notebook.
Regards,
DP-K

Video portion of Nightwish DVD not playing correctly on Quicktime. It is not a smooth playback. Can I correct this?

Video portion of Nightwish DVD not playing correctly on Quicktime. It is not a smooth playback. A little jerky. Is there an easy slution to the problem?

I worded my question incorrectly. It isn't a DVD I'm having the problem with, it' s a Nightwish concert download form iTunes I am having the video portion of the video that plays not smoothy. Like it is moothing it short little segments, not a steady flow!

Latest version of itunes does not support Quicktime can not play movie from library

Latest version of Itunes does not support Quicktime. I can not play movies out of my itunes. Please fix

I don't usually download video from the iTunes store. I had a couple of long plane rides coming up and thought I might have time to watch the Stanford IOS7 programming class. On the plane I discovered this issue which has gone unaddressed since 2011 and has been worsened in Mavericks. in 2011 the advice was to open iTunes' get info pane and click run in 32 bit. That worked at least for some people. In Mavericks, iTunes will not launch in 32 bit.
For the files you can locate in the finder ( mine are at
/Users/raine001/Music/iTunes/iTunes\ Media/iTunes\ U/Developing\ iOS\ 7\ Apps\ for\ iPhone\ and\ iPad/1.\ Class\ Logistics\,\ Overview\ of\ iOS\,\ MVC\,\ Objective-C.mp4
) you can click on the file in the finder and it will launch in QuickTime. For some reason on the plane I could see the first lecture in the iTunes view but, although I could see all the other lectures in the finder, I could not see the first one.
Ah well, maybe some other year I'll think about getting up to speed on ios7. Heck, maybe by then they will design a decent user experience.

Quicktime 7.6 NOT playing movie trailers from Apple site???

I have all the latest software OSX 10.56 running on a 3.06GHz Intel Duo but Quicktime 7.6 will not play movie trailers when on the Apple site. When I try, the site advises I need the latest Quicktime which I have already downloaded and installed fresh. It just doesn't seem to recognize it no matter which movies I try and view.
Please help if you can?
Thanks

It's a piece of component software that's used by QuickTime to allow it to decode or encode different types of video/audio formats. The issue for me was that I had an old codec still in my system that should have been deleted/replaced during the last update, but was not. So when QT tried to access what it thought was an appropriate up-to-date decoder, it couldn't process the video with it and gave me a blank screen. Something similar could be happening to you as well.
Try deleting all of the QuickTime components and folders in your system. Because you're using Leopard, I'm not sure all the files will be where they are for me. Do a thorough search of your system and clean out any QuickTime files you find, they'll be in HDD/Library, HDD/System/Library, and HDD/Users/"yourusername"/Library. Then reinstall QuickTime using the installer from Apple's downloads page(or Software update will probably work as well). You'll have to restart afterwards and make sure to repair permissions after you've rebooted(use Disk Utility). Then test out the trailers again and see if that solves it.

HT3775 Hi...I have the OS X v10.6.8 but my QuickTime is not playing .mov files. How can I fix this?

Hi...I have the OS X v10.6.8 but my QuickTime is not playing .mov files. How can I fix this?

Hi...I have the OS X v10.6.8 but my QuickTime is not playing .mov files. How can I fix this?
Depends of the specific kind of file you are trying to play. MOV refers to the file container. Any data compatible with the system used to create the file can be placed in an MOV file. If you don't have the same codecs available on your computer to play back the file or if your version of the QT player does not expect expect the encoded data to be in an MOV file container, then it cannot/will not play the file. Use the Finder Info window, media player Inspector/Information window, or a dedicated utility to determine what compression formats were used to create the MOV file and then install the required codec(s) if available.

How do you close " CyberLink power DVD"

Keep getting notification to close Cyber Link power Dvd when i try to view a video , I have a new HP Pavilion Windows 8.1
Cant find solution other than to reboot

Hi rhr22,
Welcome to the HP Forums!
I have read your post on how your CyberLink Power DVD gives you a notification when viewing videos, and I would be happy to assist you! To begin, I will need to ask you a few questions:
What is the Product and Model Number of your desktop computer?
Has your computer completed all of its important Windows Updates?
Is this an on-going or recent issue?
If you use a different video viewing program such as Windows Media Player?
When you receive this notification, is there a numbered error in the same window?
Do you get this same error message if you try different DVDs?
Please re-post with the necessary information, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

10.8.5 ITUNES WILL NOT PLAY MOVIES DOWNLOADED FROM ITUNES

Downloaded the new iTunes last night and it seems to work well with music but it will not play movies I've downloaded from the iTunes store. The sore works, Radio works, I can buy from the store but movies I have from iTunes (Star Trek, The Incredibles, ST: Into Darkeness among others) strat then crash. I get a message about an error with a plug in (FX I think) that has failed or is not found.
Anybody else seeing this? Any solutions?
Thanks in advance.

Okay, I think I found my problem. I have SRS iWOw installed and the FX plugin is part of that. If I disable iWow all movies play as they are supposed to.
Looks like I need to contact SRS for an update/upgrade or dump it and find another sound enhancer app.
Thanks fo looking.

PS3 (blu-ray player) will not play movie after menu selection on this particular project?

When trying to play my finished Blu-ray disc on PS3 the menus display and work good. However, when I choose a selection to play the movie it returns back to the main menu. It doesn't matter if I choose the main play button or one of the chapters on the scene selection menu, it does not play the movie but rather returns to the main menu. Menus appear to be working fine!
I've used Encore for years and I'm pretty familiar with the ins and outs of creating DVD's. I'm a little new at creating Blu-rays but have found the process very similar to creating DVDs with the addition of being able to add Popup menus. I pretty much followed the same process as a Blu-ray I created a couple months ago which worked fine. So I'm pretty much at a lose how to trouble shoot this issue. The only thing that has changed is that I've upgraded from Mavericks to Yosemite but I really don't know if that is a factor or not. Encore did not run into any issues while working on the project.
Everything works when previewing my project in Encore. All the menus and buttons work and the movie plays fine. Also, no errors are reported after running the Check Project process on the Build tab.
I usually create an ISO file to burn from later. Encore created the ISO file and reported success.
I'm running Adobe CS6 on a Mac with Yosemite. FCPX was used to output the AC3 audio file and 264 video file. Menu transitions are ProRes422.
So far while trouble shooting I've made 3 coasters.
1st disc was created using Yosemite Disk Utility to burn the ISO file created by Encore (my usual way).
2nd, and 3rd disc I let Encore burn directly from the project.
3rd disk I removed the PopUp menu as I've only done one in the past and figured I would try that as a trouble shooting step.
So, since everything appears fine Encore I'm really not sure how to trouble shoot this. I wish Apple would support Blu-ray better so I could just open the ISO file in DVD Player like I do when I create DVD ISOs. So much easier than having to trouble shoot by creating coasters.
If anyone has come across this issue before and has any suggestions I would really appreciate it. I'd like to complete this project and move on.
Thanks in advance!

Well, at this point I'm thinking maybe something is wrong with the movie files output from FCPX even though they play fine in Encore. I noticed that there is a one frame difference between the video and audio file. The video file is 00:38:45:01 and the audio file is 00:38:45:02. I already output the file using Compressor. However, I'm still seeing the exact same time difference between the video and audio file when imported back into Encore. I'm going to rebuild the Encore project from scratch using the movie files output from Compressor and try again. If that doesn't work I'll use 7toX to convert FCPX XML and try importing the XML into Premier Pro and output the movie files that way for Encore. Or, output a master file from FCPX and let Encore do the transcoding.

T-61 not playing movies

After doing a recent Lenovo update, when I try to play a movie in my DVD drive, the movie starts and after about five seconds it stops and give me the message, "Playback Stopped. Copy Protection Signal is Detected." This is when playing it through InterVideo WinDVD. If I try to play the DVD through Windows Media Player I get a movie that plays but no sound at all. Does anyone have any ideas out here?

Hello,
it´s an original or a burned dvd?
Please try VLC-Player if you get audio there.
I would try to go to Lenovo support pages and download the newest WINDVD version.
Uninstall the old one and install the downloaded package.
Regards
Andreas
Follow @LenovoForums on Twitter! Try the forum search, before first posting: Forum Search Option
Please insert your type, model (not S/N) number and used OS in your posts.
I´m a volunteer here using New X1 Carbon, ThinkPad Yoga, Yoga 11s, Yoga 13, T430s,T510, X220t, IdeaCentre B540.
TIP: If your computer runs satisfactorily now, it may not be necessary to update the system.
English Community Deutsche Community Comunidad en Español

Cyberlink power dvd not playing movies

Similar Messages

Maybe you are looking for