Cyberoam problem while using wifi on iPhone 5
cyberoam problem while using wifi on iPhone 5
yes I have a problem. big problem which is causing an itch in my nose. I M a college student and i use wifi of my college for internet surfing and downloading from my iphone 5. for That I got to first login into cyberoam. I do so and start browsing. but the problem is,the cyberoam login page pops up every minute asking to login. it causes problem while I keep anything for downloading. it's the cause only with my iPhone 5. I use my windows pc without any problem. what is the sloution for this. I hope the question is quite clear to you.
Similar Messages
-
4S ios updated to 7 is giving me problems for using wifi Thus it is difficult for me to use internet. The wifi comes ON for a while and goes off in a few minutes The phone is unable to scan networks available for use
Am having ipad2, ipad mini and iphone 4 with family of two persons. One hp laptop and a DELL professional computer also in operation
Myself an engineer for projects
Looks the company apple cannot grow if they do not support solving the problems of their existing customers
Ashok Dhingra
IndiaYou are not addressing Apple here. If you have a problem, describe it and someone might be able to help. Just to be sure, the wi-fi on the phone will go off after the phone goes into sleep mode unless it is actively being used. This is a battery saving measure. If you are actively using the internet, and the phone is still awake, then the wi-fi should remain connected.
What troubleshooting steps have you tried. -
Lots of info about one user using multiple computers. What about multiple users with separate Apple IDs using same computer? Having problems getting my wifes new iPhone talking to her apple account on the computer we share (2 users)
You need to create a user account for your wife (or yourself depending on who has the current user account). When syncing, each of you should sign in as a separate user, login to iTunes and then sync. I had this problem when my sister got an iPhone. When we did her initial sync, everything on my iPhone showed up on hers. Apple gave me this solution.
-
Volume problem while using headphone
when I use my headphone I have no problem while talking on phone but when I try to listen to music or watch you tube I cannot hear the left side. I restored iphone and got replacement but same problem. I changed headphones but that wasent the problem as well. please help!
s. laxnars wrote:
I am facing some problem while using preparedStatement.setNull while using Bea's Orale XA Driver, the same code works fine with oracle XA driver,
Can any one plz help on this.
Here the code
String insertIntoTestRequestQuery = "Insert into A values(?,?,?)";
PreparedStatement dbInsertStatement = connection.prepareStatement(insertIntoTestRequestQuery);
dbInsertStatement.setLong(1, 3L);
dbInsertStatement.setString(2,"test");
dbInsertStatement.setNull(3,java.sql.Types.NULL);
I am using Weblogic 9.2 with Oracle 9i
here the Spy Log
spy>> PreparedStatement[163].setNull(int parameterIndex, int sqlType)
spy>> parameterIndex = 1
spy>> sqlType = 0
spy>> java.sql.SQLException: [BEA][Oracle JDBC Driver]The specified SQL type is not supported by this driver. ErrorCode=0 SQLState=HY004
java.sql.SQLException: [BEA][Oracle JDBC Driver]The specified SQL type is not supported by this driver.
at weblogic.jdbc.base.BaseExceptions.createException(Unknown Source)
at weblogic.jdbc.base.BaseExceptions.getException(Unknown Source)
at weblogic.jdbc.base.BasePreparedStatement.validateSqlType(Unknown Source)
at weblogic.jdbc.base.BasePreparedStatement.setObjectInternal(Unknown Source)
at weblogic.jdbc.base.BasePreparedStatement.setNull(Unknown Source)
at weblogic.jdbcx.base.BasePreparedStatementWrapper.setNull(Unknown Source)
at weblogic.jdbcspy.SpyPreparedStatement.setNull(Unknown Source)
at weblogic.jdbc.wrapper.PreparedStatement.setNull(PreparedStatement.java:491)Hi. This is a known issue. Call official BEA support and open a case
so you will be notified when a new driver will have the fix. In the
meantime, if you set the Type to correspond to the DBMS's column type,
it will work. In fact, I'll bet that if you just set the Type to VARCHAR
it will work, regardless of the actual column type...
Joe -
From the day I bought it I realized the phone heats up after a little use. It gets really hot while using Wifi and downloading. Anyone else having these issues? What's the solution to this?
Your VGA is definitely corrupted and it is irreparable, so just make the HP to change your vga.
Also next time read my post on how to keep your laptop cool to avoid same issues again.
I assume your laptop was pretty hot during some time and that's the result you've got.
Make it easier for other people to find solutions, by marking my answer with 'Accept as Solution', if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks" -
I am having problem while using ms word with anjal( OS X Lion 10.7.5 (11G63))
i am having problem while using ms word with anjal is not working properly but its working in facebook and other areas.i need and its very important to using tamil fonts for my job.can anyone help me out from this problem.
thanking you
by
mosesThose who are knowledgable in this area (myself not among them) say that Word's support for Asian languages is faulty. The best word processor for that use is "Mellel."
-
TS1398 Hi..I have problem disconnected my wifi in iPhone 4 with ios7..
Hi..I have problem disconnected my wifi in iPhone 4 with ios7..
Thanks for ur help but u can't fixed nd I know this way ,I tried many time before but doesn't work..I am sure this new software iOS 7.0.4 broke the connection of wifi,because last time was working normal ,so this is just buisness for Apple company to make more offer from people to think always to bay new one.
This is all just game buisness...thanks for helping again . -
i have updated newer version of iphone there is a problem while backing up administrator iphone.how to fix this error?
what error?
-
Problem while using trigger from line of 6534
I have faced some problems while using triggering with 6534. They are listed below. Please provide solution me.
1. ) i was using pattern input with triggering(buffered) in which i am using the example given in library buffered pattern input-triggered.vi
Now i am using port 0 to take input. From line 0 of port 2 i want to generate a pulse which can trigger the operation & start acquisition. For that i am using write to single line.vi . My DPULL is open so bydefault the line will be at low level & by vi i will make it high which will trigger the operation.
In normal condition if we use write to a single line.vi it will write the given status on that line within a fraction of second and abort execution. But when i am usin
g it for trigger in following manner, it did not work.
First i started the VI buffered pattern input-triggered.vi.I have configured the start trigger with leading edge trigger. I have set the time limit properly.Synchronous operation is set at the front panel of vi.
Now if start the write to a single line.vi to give start trigger, nether it triggered the operation,nor it abort execution of single line write vi.When time out occured in triggered vi, then both vis stopped simultaneously. Why this happened?
2.) Similar problem i faced when i wanted to perform the change detection.vi Port 0 is configured for input.Line 1 to 7 are fixed with some status by connecting them to Vcc or GND. I have connected port 0 line 0 with port 2 line 0. So when i change status of line 0 of port 2 change detection should be occured o port 0. i am changing the status of line 0 of port 2 by write to a single line.vi But here i faced same problem as first that it was not writing to port 0 line 0. And bo
th process stopped when time limit occured in change detection vi.
So what can be the problem? Please help me.Hi Vishal,
1) You should check to see that when you are writting a static 1 to line 0 you see a pulse high. You should also make sure that you wire this line to the STARTTRIG for group 0.
2) If you solve question 1 you will also have question 2 solved.
It might be helpful to create a program that configures both programs (pattern I/O on port 0 and static I/O on port 2) in the same program and then starts both groups. I would do a little testing to see exactly what signals you do or do not see.
Ron -
Problem while using receive after invoke activity
Hi,i have got a problem while using a receive activity,after a invoke activity.The invoke acivity seems that does not work and also the debugger runs forever....But if i remove the receive activity,the invoke activity works fine.
<h2>The output of GlassfishV2 is:<h2>
This is from the exception block.
com.sun.bpel.model.meta.impl.RInvokeImpl@f590c6={<?xml version="1.0" encoding="utf-8" ?>
*<invoke name="Invoke1"*
partnerLink="PartnerLink2"
portType="tns:test_service3"
operation="luizao"
inputVariable="LuizaoIn"
outputVariable="LuizaoOut"
xmlns:tns="http://dim.test.org/"></invoke>}
*[Fatal Error] :1:1: Content is not allowed in prolog.*
System exception occured while executing a business process instance.
java.lang.NullPointerException: WSDL message model is null
at com.sun.jbi.engine.bpel.core.bpel.debug.WSDLMessageImpl.<init>(WSDLMessageImpl.java:56)
at com.sun.jbi.engine.bpel.core.bpel.engine.impl.CallFrame.onFault(CallFrame.java:380)
at com.sun.jbi.engine.bpel.core.bpel.model.runtime.impl.SyntheticThrowUnitImpl.doAction(SyntheticThrowUnitImpl.java:91)
at com.sun.jbi.engine.bpel.core.bpel.engine.impl.BPELInterpreter.execute(BPELInterpreter.java:145)
at com.sun.jbi.engine.bpel.core.bpel.engine.BusinessProcessInstanceThread.execute(BusinessProcessInstanceThread.java:76)
at com.sun.jbi.engine.bpel.core.bpel.engine.impl.BPELProcessManagerImpl.process(BPELProcessManagerImpl.java:818)
at com.sun.jbi.engine.bpel.core.bpel.engine.impl.EngineImpl.process(EngineImpl.java:261)
at com.sun.jbi.engine.bpel.core.bpel.engine.impl.EngineImpl.process(EngineImpl.java:742)
at com.sun.jbi.engine.bpel.BPELSEInOutThread.processRequest(BPELSEInOutThread.java:401)
at com.sun.jbi.engine.bpel.BPELSEInOutThread.processMsgEx(BPELSEInOutThread.java:240)
at com.sun.jbi.engine.bpel.BPELSEInOutThread.run(BPELSEInOutThread.java:158)
This is from the exception block.
I think correlation sets are ok(i have two receive activities).
I use Netbeans6.0 IDE.
Can anyone help me?
Sorry,but i don't speak English fluentlyI can't debug it more,because the bpel variables window disappears when the proccess comes to invoke activity.
The bpel code is simple:I have got a sequence with follow activities:
receive
assign
invoke
receive
assign
reply
The code is:
<?xml version="1.0" encoding="UTF-8"?>
<process
name="Testfile2"
targetNamespace="http://enterprise.netbeans.org/bpel/Test2/Testfile2"
xmlns="http://docs.oasis-open.org/wsbpel/2.0/process/executable"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:tns="http://enterprise.netbeans.org/bpel/Test2/Testfile2" xmlns:ns0="http://xml.netbeans.org/schema/Testfile2" xmlns:ns1="http://j2ee.netbeans.org/wsdl/Testfile2">
<import namespace="http://j2ee.netbeans.org/wsdl/Testfile2" location="Testfile2.wsdl" importType="http://schemas.xmlsoap.org/wsdl/"/>
<import namespace="http://enterprise.netbeans.org/bpel/test_service3Wrapper" location="Partners/test_service3/test_service3Wrapper.wsdl" importType="http://schemas.xmlsoap.org/wsdl/"/>
<import namespace="http://dim.test.org/" location="Partners/test_service3/test_service3.wsdl" importType="http://schemas.xmlsoap.org/wsdl/"/>
<import namespace="http://enterprise.netbeans.org/bpel/test_service2Wrapper" location="Partners/test_service2/test_service2Wrapper.wsdl" importType="http://schemas.xmlsoap.org/wsdl/"/>
<import namespace="http://dim.test.org/" location="Partners/test_service2/test_service2.wsdl" importType="http://schemas.xmlsoap.org/wsdl/"/>
<partnerLinks>
<partnerLink name="PartnerLink3" xmlns:tns="http://enterprise.netbeans.org/bpel/test_service2Wrapper" partnerLinkType="tns:test_service2LinkType" myRole="test_service2Role"/>
<partnerLink name="PartnerLink2" xmlns:tns="http://enterprise.netbeans.org/bpel/test_service3Wrapper" partnerLinkType="tns:test_service3LinkType" partnerRole="test_service3Role"/>
<partnerLink name="PartnerLink1" xmlns:tns="http://j2ee.netbeans.org/wsdl/Testfile2" partnerLinkType="tns:Testfile21" myRole="Testfile2PortTypeRole"/>
</partnerLinks>
<variables>
<variable name="Testfile2OperationOut" xmlns:tns="http://j2ee.netbeans.org/wsdl/Testfile2" messageType="tns:Testfile2OperationReply"/>
<variable name="Operation1In" xmlns:tns="http://dim.test.org/" messageType="tns:operation1"/>
<variable name="LuizaoOut" xmlns:tns="http://dim.test.org/" messageType="tns:luizaoResponse"/>
<variable name="LuizaoIn" xmlns:tns="http://dim.test.org/" messageType="tns:luizao"/>
<variable name="Testfile2OperationIn" xmlns:tns="http://j2ee.netbeans.org/wsdl/Testfile2" messageType="tns:Testfile2OperationRequest"/>
</variables>
<correlationSets>
<correlationSet name="CorrelationSet1" properties="ns1:My_Property"/>
</correlationSets>
<sequence>
<receive name="Receive1" createInstance="yes" partnerLink="PartnerLink1" operation="Testfile2Operation" xmlns:tns="http://j2ee.netbeans.org/wsdl/Testfile2" portType="tns:Testfile2PortType" variable="Testfile2OperationIn">
<correlations>
<correlation set="CorrelationSet1" initiate="yes"/>
</correlations>
</receive>
<assign name="Assign1">
<copy>
<from>$Testfile2OperationIn.part1/ns0:ena</from>
<to>$LuizaoIn.parameters/ena</to>
</copy>
<copy>
<from>$Testfile2OperationIn.part1/ns0:id</from>
<to>$LuizaoIn.parameters/id</to>
</copy>
</assign>
<invoke name="Invoke1" partnerLink="PartnerLink2" operation="luizao" xmlns:tns="http://dim.test.org/" portType="tns:test_service3" inputVariable="LuizaoIn" outputVariable="LuizaoOut"/>
<receive name="Receive2" createInstance="no" partnerLink="PartnerLink3" operation="operation1" xmlns:tns="http://dim.test.org/" portType="tns:test_service2" variable="Operation1In">
<correlations>
<correlation set="CorrelationSet1" initiate="no"/>
</correlations>
</receive>
<assign name="Assign2">
<copy>
<from>$Operation1In.parameters/hik</from>
<to>$Testfile2OperationOut.part1/ns0:hik</to>
</copy>
</assign>
<reply name="Reply1" partnerLink="PartnerLink1" operation="Testfile2Operation" xmlns:tns="http://j2ee.netbeans.org/wsdl/Testfile2" portType="tns:Testfile2PortType" variable="Testfile2OperationOut"/>
</sequence>
</process>If it's a bug,that means that i can't use second receive after invoke any more? -
Problem while using h:selectOneMenu tag
Hello All,
I am facing a problem while using the <h:selectOneMenu in my JSP.
My requirement is as below,
I am having a list of manager in the select box.
User will select any of the manager and click a command link to assign the manager.
On click of this command link backerbean method should be invoked.
My problem is,
I am able to display the list box without any problem.
But Once I select any value from the list box the command link is not working.
That is click on the command link is not invoking the backer bean method.
My code look as below,
JSP
<td>
<h:selectOneMenu value="#pc_EmployeeDetailsView.assignedMgrPositionId}" id="assignedMgrPositionId" style="width: 170px">
<f:selectItems value="#{pc_EmployeeDetailsView.managerList}" />
</h:selectOneMenu>
</td><td>�</td>
<td><h:commandLink action="#pc_EmployeeDetailsView.assignManager}" onmousedown="setEditAction('assign');">
<h:outputText value="Assign"></h:outputText>
</h:commandLink></td>Backer Bean
SelectItem managerSelectItem = new SelectItem("0","Select Manager");
ArrayList managerSelectItemList = new ArrayList();
managerSelectItemList.add(managerSelectItem);
int managerListSize = managerSearchList.size();
for (int i=0; i<managerListSize; i++) {
Employee manager = (Employee) managerSearchList.get(i);
managerSelectItem = new SelectItem(StringUtils.isNotEmpty(manager.getOrgInfo().getPositionNumber())?manager.getOrgInfo().getPositionNumber():"",StringUtils.isNotEmpty(manager.getFullDisplayName())?manager.getFullDisplayName():"");
managerSelectItemList.add(managerSelectItem);
setManagerList(managerSelectItemList);Please help me on this.
Thanks In AdvanceI have solved this problem by putting the list in portlet session and allowing the get method to get the SelectItem from the session
-
Problem while using BEA's Oracle Driver
I am facing some problem while using preparedStatement.setNull while using Bea's Orale XA Driver, the same code works fine with oracle XA driver,
Can any one plz help on this.
Here the code
String insertIntoTestRequestQuery = "Insert into A values(?,?,?)";
PreparedStatement dbInsertStatement = connection.prepareStatement(insertIntoTestRequestQuery);
dbInsertStatement.setLong(1, 3L);
dbInsertStatement.setString(2,"test");
dbInsertStatement.setNull(3,java.sql.Types.NULL);
I am using Weblogic 9.2 with Oracle 9i
here the Spy Log
spy>> PreparedStatement[163].setNull(int parameterIndex, int sqlType)
spy>> parameterIndex = 1
spy>> sqlType = 0
spy>> java.sql.SQLException: [BEA][Oracle JDBC Driver]The specified SQL type is not supported by this driver. ErrorCode=0 SQLState=HY004
java.sql.SQLException: [BEA][Oracle JDBC Driver]The specified SQL type is not supported by this driver.
at weblogic.jdbc.base.BaseExceptions.createException(Unknown Source)
at weblogic.jdbc.base.BaseExceptions.getException(Unknown Source)
at weblogic.jdbc.base.BasePreparedStatement.validateSqlType(Unknown Source)
at weblogic.jdbc.base.BasePreparedStatement.setObjectInternal(Unknown Source)
at weblogic.jdbc.base.BasePreparedStatement.setNull(Unknown Source)
at weblogic.jdbcx.base.BasePreparedStatementWrapper.setNull(Unknown Source)
at weblogic.jdbcspy.SpyPreparedStatement.setNull(Unknown Source)
at weblogic.jdbc.wrapper.PreparedStatement.setNull(PreparedStatement.java:491)s. laxnars wrote:
I am facing some problem while using preparedStatement.setNull while using Bea's Orale XA Driver, the same code works fine with oracle XA driver,
Can any one plz help on this.
Here the code
String insertIntoTestRequestQuery = "Insert into A values(?,?,?)";
PreparedStatement dbInsertStatement = connection.prepareStatement(insertIntoTestRequestQuery);
dbInsertStatement.setLong(1, 3L);
dbInsertStatement.setString(2,"test");
dbInsertStatement.setNull(3,java.sql.Types.NULL);
I am using Weblogic 9.2 with Oracle 9i
here the Spy Log
spy>> PreparedStatement[163].setNull(int parameterIndex, int sqlType)
spy>> parameterIndex = 1
spy>> sqlType = 0
spy>> java.sql.SQLException: [BEA][Oracle JDBC Driver]The specified SQL type is not supported by this driver. ErrorCode=0 SQLState=HY004
java.sql.SQLException: [BEA][Oracle JDBC Driver]The specified SQL type is not supported by this driver.
at weblogic.jdbc.base.BaseExceptions.createException(Unknown Source)
at weblogic.jdbc.base.BaseExceptions.getException(Unknown Source)
at weblogic.jdbc.base.BasePreparedStatement.validateSqlType(Unknown Source)
at weblogic.jdbc.base.BasePreparedStatement.setObjectInternal(Unknown Source)
at weblogic.jdbc.base.BasePreparedStatement.setNull(Unknown Source)
at weblogic.jdbcx.base.BasePreparedStatementWrapper.setNull(Unknown Source)
at weblogic.jdbcspy.SpyPreparedStatement.setNull(Unknown Source)
at weblogic.jdbc.wrapper.PreparedStatement.setNull(PreparedStatement.java:491)Hi. This is a known issue. Call official BEA support and open a case
so you will be notified when a new driver will have the fix. In the
meantime, if you set the Type to correspond to the DBMS's column type,
it will work. In fact, I'll bet that if you just set the Type to VARCHAR
it will work, regardless of the actual column type...
Joe -
Problem while using netscape.ldap.util.ConnectionPool
Hi,
We have a problem while using netscape's netscape.ldap.util.ConnectionPool class.
( iPlanet 5.1
ldap sdk 4.0 )
First we obtain a connection from the ConnectionPool class by using the constructor as below
//create pool
pool = new ConnectionPool(10, 50, "localhost", 389, "cn=Directory Manager", "password");
//get conn from pool
conn = pool.getConnection();
After doing some ldap read only operations if we disconnect using
//disconnect
conn.disconnect();
the junit test cases whihc use the above code
take sometime to execute fully
Sometimes there's no response also.
Also just the disconnection alone takes quite some time(~1000 ms)..
If the conn.disconnect() is not used then its pretty fast.
Could anybody throw more light on this issue
ThanxI think i found the problem..correct me if i'm wrong
I tried using
pool.close( conn );
and the time taken now is almost negligible
If you can give suggestions I would be only glad -
Problem while using struts 1.3.8
Hi All,
I have some problem while using struts 1.3.8 in my application.
I am using OC4J 10.1.2.0.2, my simple coding is follows:
<%@ page contentType="text/html;charset=utf-8"%>
<%@ taglib uri="/WEB-INF/tlds/struts-tiles.tld" prefix="tiles"%>
<%@ taglib uri="/WEB-INF/tlds/struts-bean.tld" prefix="bean"%>
<%@ taglib uri="/WEB-INF/tlds/struts-html.tld" prefix="html"%>
<%@ taglib uri="/WEB-INF/tlds/struts-logic.tld" prefix="logic"%>
<html:xhtml />
<html:form action="<action page>" method="POST" enctype="multipart/form-data" >
<p>
<label for="Subject" ><span class="Mandatory">*</span> Subject:</label>
<html:text size="40" property="subject" />
</p>
<p>
<label for="upload" >Attachment:</label>
<html:file size="40" property="attachmentFile" />
</p>
<p>
<html:submit />
</p>after clicking my the submit button in the server console i m getting
JAAS-OC4J: JAZNFilter.doFilter - unable to find the current servlet
javax.servlet.ServletException: JAAS-OC4J: JAZNFilter.doFilter - unable to find the current servlet
at oracle.security.jazn.oc4j.JAZNFilter.doFilter(Unknown Source)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:663)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330)
at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:222)
at org.apache.struts.tiles.commands.TilesPreProcessor.doForward(TilesPreProcessor.java:260)
at org.apache.struts.tiles.commands.TilesPreProcessor.execute(TilesPreProcessor.java:217)
at org.apache.commons.chain.impl.ChainBase.execute(ChainBase.java:191)
at org.apache.commons.chain.generic.LookupCommand.execute(LookupCommand.java:305)
at org.apache.commons.chain.impl.ChainBase.execute(ChainBase.java:191)
at org.apache.struts.chain.ComposableRequestProcessor.process(ComposableRequestProcessor.java:283)
at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1913)
at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:462)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
at oracle.security.jazn.oc4j.JAZNFilter$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.Subject.doAsPrivileged(Subject.java:500)
at oracle.security.jazn.oc4j.JAZNFilter.doFilter(Unknown Source)
at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:16)
at com.ed.ecomm.edcore.web.filters.SecurityFilter.doFilter(SecurityFilter.java:196)
at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:20)
at com.ed.ecomm.edcore.web.filters.MonitoringFilter.doFilter(MonitoringFilter.java:138)
at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:20)
at com.ed.ecomm.edcore.web.filters.SetCharacterEncodingFilter.doFilter(SetCharacterEncodingFilter.java:92)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:659)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:830)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:285)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:126)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
at java.lang.Thread.run(Thread.java:534)
further i investigate and i removed the "enctype=multipart/form-data" from the form attribute its working fine..
but without using this attribute struts doesn't support the "upload" i.e, form file... its throwing another exeception..
could you anyone please let me know whether i can change my OC4J server version of anything need to do..
many thanks in advanceI'm having the same exact problem. Any ideas?
Schema sfactory;
Schema schema;
sfactory = SchemaFactory.newInstance(XMLConstants.W3C_XML_SCHEMA_NS_URI);
ErrorHandler eHandler = new MyErrorHandler();
sfactory.setErrorHandler(eHandler);
LSResourceResolver lsrResolver = new MyLSResourceResolver();
sfactory.setResourceResolver(lsrResolver);
schema = sfactory.newSchema(new File(argv[1]));The last line gives me NullPointerException. I know the file (argv[1]) exists and can be read because I can print it with a BufferedReader. -
Assertion problem while using C++ 5.0 compiler
Hi,
we are using C++ compiler 5.0 on sparc solaris 2.6 machine.
when we tried to build the debug version of a particular exe with -g
option , we are getting the following error message
Assertion : ( ../links/dgb_cstabs.cc line 1516)
while compiling a .cc file.
without the -g option ,the file compiles successfully.
so please throw some light on this problem and help us to getout of
this problem.
regards
tungaAssertion problem while using C++ 5.0 compiler on solaris 2.6
Maybe you are looking for
-
I purchased 'the traveling willerbys via an ipad, it download onto the ipad ok and via the cloud onto my PC. However, it will not load to my iPod. All software is current and I have deleted the iPod and reload all music and audio files, everything
-
Inactive and Active Workspace in CONS not in sync
Hi, We are facing a situation in the NWDI. The Public Part declared in a DC was renamed to Common_FunctionsSDA and Common_FunctionsAPI. During the activity imports into CONS system we observed that the activities failed because the DC in CONS system
-
Question on sort behavior when inserting ACL lines into existing ACL
Hello, I have a request / need to insert lines into existing ACLs (some standard, some extended) and I need to control where they are added (we want some to go to the top, some in the middle, some second from bottom). I'm trying to understand / follo
-
Open Custom PCR forms (created using ISR framework) from UWL for approval
Hi, I have made a custom JSP iview using the ISR framework . The form can be submitted and a notification is created. The Workflow is generating the workitem wihich appears in the UWL worklist. HOw can i open the custom JSP iview from the UWL for the
-
Hoping someone out there can with getting junk mail from my windows live mailbox ? on my iphone
Hoping someone could help me with getting junk mail from windows mail to my i phone?, i would only like to get my inbox mail