Cycle Between Logo and Pascode

Recently, I've been having a problem with my 4th generation iPod touch running 4.2.1. Every time the battery dies (and occasianly w/o this happening) and I attempt to use it after or during charging, it will go to the logo screen, stay there for about a minute, go to the passcode screen, stay for about a minute, and repeat ad infinitum. I've tried to stop this cycle by holding down the power and home buttons, which turns it off for a few seconds before turning on to the logo, where it all happens again. Any idea what's going on?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Similar Messages

Hi I am having problems downloading and updating apps on my iPad and iPhone. The message cycles between waiting and loading then I get an error message saying unable to download app. Eventually,after many attempts it works.

Hi Guys - for a few days I have been having problems downloading and updating apps on my iPad and iPhone. The message cycles between waiting and downloading then eventually says unable to download app. Sometimes after many attempts it wil eventually work. I tested it on an old iPhone 3G and got the same problem so it is not an iOS 5 issue. My WI-FI connection is working fine. I was wondering if this is an App Store problem? Anyone else in the UK having this problem?

Hi John
iTunes Support wasn't of any use to me.
I have also been having another problem - with BBC iPlayer and other video streaming not working due to insufficient bandwidth, despite my overall download speed being consistently around 50Gb. This is also affecting AppleTV downloads
I am using Virgin Media as my ISP, and was wondering whether you do as well. This might be the common thread.
-Bernard

What are the differences between Logos and LogosXT?

What are the differences between Logos and LogosXT?

Logos XT is a networking middle-layer maintained by the LabVIEW Network Technologies and Security group. Logos XT provides a thin layer on top of TCP/IP to simplify some common network tasks.
The underlying foundation for NI networking is called Logos.
I believe that the basic idea is Logos is what is going on behind the scenes at the base level and Logos XT lets you build your own networking protocols on top of Logos. Logos XT would be used if you want to make your own networking protocol instead of using TCP/IP or UDP.
Scott A
SSP Product Manager
National Instruments

Inserting New Region between Logo and Breadcrumb Region

Hello Apex Forum!
Is it possible to insert a new region between Logo and Breadcrumb Region?
I have to rebuild a existing webpage. There the Main Menu is shown between the Logo and the breadcrumb region.
Thank you
Johann

Hello,
Sure you just need to move one of the #REGION_POSTION_N# substitution tags there in the page template.
Carl

Artifacts between Logo and Vertical Menu Bar

See http://www.ottawapatentagency.com
Artifact #1: a light grey dot at the joint between the logo and the vertical menu bar, on the right hand side.
Artifact #2: on mouse over 'Home' - the top menu item of the vertical menu bar - there appears a light-colored, 1-pixel separation between the logo and the vertical menu bar.
The logo is a standard gif and the vertical menu bar is a standard spry menu bar, I am puzzled.
Anyone has a solution?

You could try adding the following code above your closing </head> tag:

Also, it looks like you need to add closing brackets to the following two lines:
<link rel="shortcut icon" href="/favicon.ico" type="image/x-icon"
<link rel="icon" href="/favicon.ico" type="image/x-icon"

App store download cycles between installed and calculating

I'm running Mountain Lion on a 24" iMac. Last night I purchased an app called Kvlt from the AppStore. It started downloading then said it was installed then jumped back to calculating.. installed.. calculating.. installed. It just keeps doing that. I cant cancel it in the App Store because I am never presented with that option. I did manage to get it to pause. Ive rebooted, check/repaired permissions, trashed AppStore preferences but those did not help. One thing that I thought was odd is that it shows the size of Kvlt to be 746.24KB which I thought was a little small. I think that if I can just get AppStore to forget it was downloading Kvlt and start fresh then things will be ok. Is there a download cache I can clear or something?
Thanks,
Alan

Make sure you emptied the trash
Now restart
If that fails, click the in the upper right hand corner of your screen and type app name in

Space between content and logo

Playing with fluid layouts and getting a space between logo and content DIV's
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Playing with Liquid Layouts</title>
<link rel="stylesheet" type="text/css" href="style.css" />
</head>
<body>
<div id="container">
          <div id="logo">
              <h1>Welcome to Liquid Layouts</h1>
              <h2 class="logo">Place your slogan here...</h2>
          </div>
          <div id="navigation">
    <ul>
              <li>Home</li>
        <li>Page 1</li>
        <li>Page 2</li>
        <li>Page 3</li>
        <li>Page 4</li>
        <li>Page 5</li>
    </ul>
    </div>
    <div id="content">
    <h1>Adding this element creates a space between logo and content...</h1>
    </div>
          <div id="footer">
    </div>
</div>
</body>
</html>
@charset "utf-8";
/* CSS Document */
body
          text-align: center;
div#container
          margin-left: auto;
          margin-right: auto;
          min-width: 600px;
          max-width: 2000px;
          text-align: left;
          width: 85%;
div#logo h1, h3
          padding-left: 20px;
          margin-bottom: 0;
div#logo h2
          padding-left: 35px;
          margin-top: 0;
          font-size: 125%;
div#logo
          background-color: #F00;
          width: 100%;
          height: 300px;
div#navigation
          background-color: #0F0;
          width: 25%;
          height: 600px;
          float: left;
div#navigation ul
          padding-left: 25%;
          font-size: 150%;
          list-style-type: square;
div#content
          background-color: #C93;
          width: 100%;
          height: 600px;
          margin-top: 0px;
div#footer
          background-color: #69F;
          height: 30px;;
.footerP
          margin-top: 0px;
          padding-left: 2%;
          line-height: 35px;;
PICTURE:
[IMG]http://i.imgur.com/1nGUG.jpg[/IMG]

The space is caused by the default margin in your H1 tag. As such, you need to define a style for H1:
h1{
margin-top:0;
padding: ??;
You can add padding to move the H1 away from the edges of the surrounding DIV.
EDIT:// An after thought. If you are "Playing with fluid layouts", you might want to consider not using heights and/or set the heights/widths in % values.

Display alternates between dark and bright

I have several issues but I suspect somehow they are all related as they all began about the same time, within about an hour of each other, which was maybe a week ago.
Periodically, my display slowly cycles between dark and bright. Sometimes the display will suddenly go to sleep on it's own, usually after a period of about 20 seconds of me not doing something and when I wake it up the display is quite dim. Other times the computer goes to sleep (not just the display) requiring me to log back on. I use password for startup. I open the display settings after log-on and the brightness slider has somehow moved way over to the dark end (left). I slide it up to where I like it and soon it does it again all by itself again after a very short period of inactivity. I have noticed that if I leave the brightness control alone (dim) without readjusting it it seems to take longer for the other issues to develop. I would normally place the brightness slider just under half way up. My sleep time settings are currently: computer - 1 hr, display 15 min. That is plugged in which is pretty much the only way I ever seem to use it ... plugged in.
Another issue is an occaisional rapid beeping. It's the same low beep that you hear when you try to do something stupid and the computer is telling you you've made an error. The difference is this is a long, unending string of rapid beeps; I'd estimate maybe 15 - 20 beeps per second. The sound does not stop. I have to mute the speakers to shut it up. I have not yet been able to determine a recognizable pattern of common variables for when this happens. The other day when the computer went to sleep by itself and I woke it and tried to input my password and I saw that the input bar was filled with black balls as if it was remembering my password which I did not like but when I hit enter the logon dilaog box shook, the entry field emptied and refilled on it's own. I held the backspace key for several seconds and nothing seemed to happen. I used shift/command/arrow to highlight the entire string and deleted it but as soon as the characters were deleted I saw the input line quickly fill back up again one ball at a time at roughly the same rate as the beeps. Then it occured to me that the beeps were similar to those you would hear if you held a key down and filled an entire entry field with a hundred of a particular character and was still holding down the key long after the field was full. My first thought was that a key was stuck down. Not so. Each and every key is free to move and functions normally.
Last night I closed the lid to put the computer to put it sleep before I went to bed. About 3 hours later I was awakened by the sound of the rapid beeping. I got out of bed and went to the computer and opened the lid to find the same input line black balls issue but this time it was accompanied by the beeping and the display was also cycling between bright and dim. As it was the middle of the night I killed the machine by holding down the power button and forcing a shutdown. This evening I decided to do the upgrade from 10.9.1 to 10.9.2 hoping that might help but it did not. I have not heard the beeping since the upgrade but the display is still cycling, which was the first thing I noticed when all of this began.

Turns out it may have been sofware issue. I suspected software anyway because rebooting could temporarily cure it. I spoke to an Apple Service and Support person on the phone. She went through a fairly lengthy process with me to evaluate the machine and determine if it was hardware or software related. The results of those steps did not lead her to any concrete conclusions but she was able to hear the beeping issue happening in real time. She guided me through the steps of O/S recovery and now several hours later the machine appears to be functioning as it is supposed to. Typically the issue(s) would show up after maybe twenty minutes or a half hour after a hard boot. I am to monitor the thing for the next week or so watching for any signs of the issues slowly returning.
Here's keeping my fingers crossed.

Wierd button behavior: flashing between Up and Over, won't go to frames

I have this strange behavior with buttons. These are button instances, not movie clips used as buttons.
I created a list of buttons for a drop down menu. Created the first one then dupliacted the symbol to create the others. The buttons have an Up and Over state. I coded each button in the normal way - for example:
on (release, releaseOutside) {
gotoAndStop("M1-2S-1");
Problem: the first button works fine but all the duplicated buttons act like movie clips with no stop. They cycle between Up and Over states and the goto code does not work.
I an using Flash CS5, Actionscript 2.0

Do all the instances have unique ids? Are the duplicate buttons displayed as Movie Clips (check the Properties tab)? If you're using goto actions anyway, why are you using buttons?

IPad cycling between Apple logo and Grinding icon endlessly

I was tooling along using my iPad when a notice for updating to IOS 8.02 came up. Then without touching any buttons my iPad started rebooting. I am cycling between the Apple logo and the working or grinding icon grinding then freezing. I cannot turn the iPad off and the battery is almost totally depleted. I tried to charge the battery overnight, but it is not charging. Any solutions? I went to iTunes to back up. When the Apple logo is showing iTunes says it cannot back up because the iPad is locked. it only recognizes the iPad when the Apple logo is showing

If you can't get in any other way, you can try restoring using recovery mode first. If that won't work, maybe you can erase it and start over using find my iPhone.
If you can't update or restore your iPhone, iPad, or iPod touch
iCloud: Erase your device

IPod Touch stuck in a cycle between Apple logo and loading sign, recovery mode not working.

I have a 4th generation iPod touch (I think it's 4th gen) and it is stuck in a vicious cycle. It started by just randomly crashing while I was using it (many of the apps were not functioning properly beforehand). It went to the Apple logo for a little while, and then went to a loading sign for a few minutes. Suddenly, the screen flashed white, and appeared to be turned off. Then it turned back on to the black logo, and the cycle began again. i have attempted many times to put it in Recovery mode, but when I hold the Home and Sleep/wake buttons, it "turns off" but only for a few precious seconds before beginning the cycle again.
Another thing, I never downloaded iOS 6 because I didn't want to lose the old YouTube app. That may be a hindrance.
At first I wondered if it could be a virus, but now I don't think so.
I am very sentimental about this iPod, and I have a lot of pictures and high scores on it that I would prefer not to lose, if possible, however, I'd rather lose that than the whole iPod. I will gladly go to the Genius Bar, but I wanted to see if anyone on here could help me out first.
Any ideas on how to get it working normally again?

I helped someone earlier who had the same problem. https://discussions.apple.com/thread/3374810?

Iphone 4 stuck between apple logo and loading circle after trying to update to IOS5

Since trying to update to IOS5 and getting the errors that most people are getting i.e. an unexpected error occurred (3004), my Iphone is now stuck between the Apple logo and the loading circle and it just keeps cycling between those 2 screens. It is not even recognised by Itunes when I plug it in.....
Anyone else got this? Any advice to try and get my Iphone 4 out of this cycle?

I too am having exactly the same problem, I can't even get to do a restore. Please can someone help?

HT1349 tried to reset to factory setting and it just has logo and just cycles

yes i tried to set to factory settings , i bought from a friend at work now the phone just wont do anything but logo and cycle, tries to reboot every ten minutes or so, held down the top button and the bottom button and it fianlly turned on when i turned back on same thing

http://support.apple.com/kb/HT1808
Try this

Why is there a one-inch gap between FF logo and search engines?(I'm using FF4).

I recently downloaded FF 4.I'm not technically savvy,and was a bit confused to see a drop down menu and the word "Firefox".
I didn't like the new set-up and managed to delete it, in favor of the logo.
Now,the opening page is in the background and there is a one-inch gap between the logo and the search engine.Is there a way to have a space reduction?
F11 is NOT a resolution.

You can make FF4 look like FF3 by doing the following.<br><br>
* Right click a blank part of the tab bar and click "Tabs on top" to remove the checkmark. Tabs will subsequently reappear below the search bar.<br><br>
* Repeat the same steps, but click the top one called "Menu bar". This will reinstate the text links at the top.<br><br>
* To rearrange the layout, repeat the same steps again and choose "Customize". A panel will open and while that remains onscreen, you can move elements like toolbars, buttons etc around and place them anywhere you wish. You can also drag anything you don't like into that panel and add anything you want by dragging it out of there.<br><br>
* To replace the status bar at the foot of the page, install this add-on: https://addons.mozilla.org/en-US/firefox/addon/status-4-evar/<br><br>

Why can't i go between facebook and my yahoo acct without completely exiting one? the message it sends me says it will cause a cycle? never had this problem be

I can't go between facebook and Yahoo with it telling me I have created a cycle. I have to go out completely and then go in to which ever one I want. It only started doing this after I installed the last Mozilla upgrade. Used too be able to switch back and for easily.
Thanks for the help.

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"
*https://support.mozilla.org/kb/how-clear-firefox-cache
*https://support.mozilla.org/kb/Deleting+cookies

Cycle Between Logo and Pascode

Similar Messages

Maybe you are looking for