Cycle count ABC report from MBEW, MARC, MLGN, MLGT

Guys I have this spread sheets I wanted to join and make a ABC analysis report that i need to confiure in ABC indicator.
If anyone have Idea how to join this spread sheet and get the ABC analysis report lick material ID,
Part # Consumption Qty Unit Cost Cons. Value Role in Total Cons. In % ***. % Class Remarks

Hello
Modify select :
SELECT werks matnr kulab sobkz charg FROM MSKU
INTO CORRESPONDING FIELDS OF TABLE it_msku
for all entries in it_mat
WHERE matnr = it_mat-matnr
AND werks IN p_plant
AND sobkz IN p_spec.
In this case if you select special stock = 'w' at the selection screen, only 'w' stock will be appear.
And if you select special stock blank (p_cpec is initial), all stock will be appear.

Similar Messages

Weblogs: Cycle Count Inventory Date: From IM inventory date to WM inventory

Dear All,
I have updated new weblog on the common problem for physical inventory.
When any organization plans to go for implementing the warehouse management; it has major concern about the physical inventory process, particularly last physical inventory date.
More details are available on this weblogs:
/people/community.user/blog/2007/10/04/cycle-count-inventory-date-from-im-inventory-date-to-wm-inventory-date
<b>Your feedback/comments are most welcome, <u>Please write on the weblog page, not in this thread.</u></b>
Regards
Arif Mansuri

Dear All,
Here is my previous weblog, Your comments will work as tonic for me ), so leave your comment on both of these blogs.
/people/community.user/blog/2007/05/04/physical-inventory-in-material-management
Enjoy SAP..
Regads
Arif Mansuri

Cycle count dates upload from Legacy.

Hi,
In my client there is a requirement to upload the last count date from legacy to sap at the time of cutover. This they want as after inventory load they dont want to start counting everything which A kind of materials. Client is asking, since i have this date, so keep this date in SAP & then calculate the next date in SAP after go live from that date.
I searched all the places & found that since the field is internal i really cannot populate this. Is there any standard program or some how create one program to upload this date. If yes then plz let me know. If you had used this methodology, then kindly provide me the details.
Thanks in advance.
Avas

Create additional CC indicator with 'No of Physical Inv' as zero and use this one to maintain the materials that already undergone cycle counting before go-live. Also, have the CC indicator as fixed for these materiasl in material master -> Plant data. When you run ABC analysis (MIBC), these CC indicators won't be changed and as they 'No of Physical Inv' as zero, they won't be part of your cycle counting. When you need these materials to be part of cycle count, change the CC indicator as fixed and run MIBC, now system proposes the cc indicator based on consumption/usage.
Or
You can keep a block for the materials that already undergone cycle counting before go-live in MBEW-SPERW through transaction MM17 or MASS.
Please award points if useful.

Cycle count listing Report not generating out put

Hi Team ,
We are into 11.5.10.2 , We have set Auto schedule to weekly in cycle counts and cycle count is not generating output for cycle count listing in Production.
But, we are able to generate report output in Test instance and unable to generate in Production . We tried testing with same login in Production and Test Instance .
Please advice
Thanks
Kiran

Also please confirm that the CC calendar and other CC related setups are exactly same from the PROD and TEST instances.
Also make sure that you are running the report for the same INV org.. as there is no Input parameter for the Org in the report input but it picks from the MFG_ORG_ID profile value, which gets assigned when you loginto the responsibility.. You can confirm the selection by Chane Instance Org and select the Inv org and then run the report..

Incorrect Folder Count (-63) report from TechTool Pro

I've gotten this message a couple times. I can't find any info on what the -63 error message is (I assume it's an incorrect folder count).
The last time it happened I booted off the startup disc and ran disc utility, which found two extra folders. I repaired the disc and it was fine for about a week, now it's back. Any ideas what might be causing this?

+I can't find any info on what the -63 error message is+
"This error can occur if your Mac OS X 10.4 client is trying to connect to a Samba or Windows (SMB/CIFS) server that only supports plain text passwords"
http://docs.info.apple.com/article.html?artnum=301580

Report for materials which have not been cycle counted.

Hi,
Is there any report which can show me materials which have not been cycle counted and also materials which have been cycle counted with the cc date?
Sincerely,
Nicky

Hi,
As of my knowledge, there is no standard report which can fulfill your requirement. You may go for development. Please check the similar thread: Cycle count analysis report
Regards,
AKPT

Manually schedulled cycle count items are not coming in cycle count listing

We had scheduled some items for manual cycle counting for particular date. But those are not getting generated in cycle count listing report or not avialble for counting.
Checkpoints done: 1. Items are cycle count enabled
2. Those items are avialable in that Cycle count Name
3. Onhand is avialbe for those items in particular subinventory
4. Cycle count scope is specific to Subinventory and that sub inv is included in the list
Can anyone give some thoughts why those manually schedulelled items are still not getting in cycle count listing report?
Thanks in Advance
Avinash

Hi Avinash,
Can you please let us know, are you using the CC with ABC analysis?
Thanks
NS

Cycle Counting is not fetching All Items in Different Classes

Hi All,
My client has performed cycle counting. Ideally system has to fetech all the items in different classes. But in cycle counting listing report only able to fetch few items.
Please let me know are we missing something ?
And please let me know the significance of "Assign Items". How to put the same.
Regards,
John
Edited by: 911765 on Mar 14, 2012 4:36 AM

1) CC won't fetch all items in all classes.
It will look at only those items that are present in the assign items screen.
It will only consider those items which have cycle count enabled flag set to Yes in item master
It will only consider those items that have a non-zero frequency for the ABC class of the item.
It will only print those items that have some onhand if you run the CC to ignore zero onhand items.
2) You can either manually add items to a CC in the assign items window.
OR
You can reinitialize or update the CC (by going to the 3rd tab on CC screen)
Make sure that you have run ABC compilation so each item has a ABC class. You should also specify the frequency for each ABC class.
Sandeep Gandhi

Cycle Counting (Ref: Q3-4)

Dear Sirs,
In Cycle counting, how to save ABC analysis for a material ? / How to choose the function of ABC analysis ?
Many Thanks,
KH Fong

Please check these answered links:
ABC analysis: cycle counting
ABC analysis for Cycle Counting.
ABC ANALYSIS FOR CYCLE COUNTING
cycle counting - ABC analysis in MIBC
Edited by: Afshad Irani on May 30, 2010 6:42 PM

Cycle count (MICN) exceeded at year end

Hi all,
i have alreay completed the cycle count till 30 dec 2009 by using MICN.But whenever i started counting for 31st december 2009( end of 2009),it is giving me 1500 materials to count. But in real scenario, it should give arround 10 materilas to count.
Please tell me what i should do so that i can get actual cycle count for 31st dec 2009. Is this problem relating to year end problem? If so, what i should do to solve this issue.
Thanks
pabi

Hi Syed,
Thanks for your reply.But i count the materials everyday.Maximum 10 materials come for cycle count everyday.
From 1st december to 30 december, i count every day & my cycle count is within 10.
But suddenly, when i put the date 31st december 2009, then cycle count is more than 1500 which is unexpected.
i came to know that, my manager has opened the calender year till 2011. Is it causing any problem?
or This is year end problem & to solve this, i need to open 2010 financial year. Plz suggest what is the real problem & solution
for this.
Thanks
pabi

Store and save cycle count data

My goal is to read the number of cycles in a while loop, take that number and save it to a file. Basically, each time the program runs, there will be X number of cycles the user performs (totally random). Say one person does 50 cycles, the next does 253, etc... I would like to generate a spreadsheet locally that will have a stamp of ALL cycles performed.
How is this doable? Unfamiliar with techniques using variables, so please extrapolate!
Here's the code. I need to know how many times the read matches the write.
Thank You!

Store the cycle count in a shift register. When the user hits "done" or "stop", write the cycle count to a dedicated file. You seem to want to remember each time it was cycled and the number, so write each new cycle count to a new line in the file (i.e. make Append True). When the program starts back up, or resumes test, read the lines into an array and add the array. That's your total cycle count to start from.
Richard

What does the field Inconsistent mean for ABC Analysis for Cycle Counting report

What does column "Inconsistent" mean for report ABC Analysis for Cycle Counting (T-code MIBC)? The reason I'm asking is because I see TotalStock values greater than 0, but the Accounting 1 view for Material Master and MMBE both show zero stock. I do not understand why TotalStock in the report does not show zero. Can anyone explain how this can happen?
Note: the report is run for consumption/usage date range.
Thank you,
Doug

Hi,
MBEW table and MMBE transaction will show the current stock. When you run MIBC report for consumption, the system considers the consumption for the date range given (from MVER table), which may not be equal to the current stock. Refer the KBA: 1817237 - Stock quantities and stock values in MIBC which explains the system design.
Regards,
AKPT

MIBC - ABC Analysis for Cycle Counting -Report : RMCBIN00

Hi All,
We are trying to have our CC inventory indicators updated by using report RMCBIN00. We noticed that if a have a part with a very high value it is most likely to get indicator A even though the demand for that part is not as high as for a part with a very low price but that we sell thousands. Can some explain how can we use this report in such a way that considers demand? Thanks for your help.

A cycle count indicator A or B or C or D is allocated to material in the material master based on either consumption value (consumption X rate) or forecast value (forecast quantity X rate). You can also specify whether this analysis is to consider only the materials with cycle counting indicator or all materials. The cycle counting indicator in the material master records can be updated automatically by this program.

A question about ABC analysis for Cycle counting

Hello expert,
What is RMCBIN00 used for? Currently, user asked me if we can copy RMCBIN00 and perform ABC analysis by quantity? I have no knowledge about it. Can any expert give some clue?
Thanks in advance,
Best Regards, Johnny

Hi
RMCBIN00 is a standard ABAP report available within your SAP system (depending on your version and release level). Below is the standard documentation available for this report and a few details of other objects it interacts with such as tables, function modules, includes etc. If you would like to see the full code listing simply enter the object name( RMCBIN00 ) into the relevant SAP transaction such as SE38 or SE80
RMCBIN00 - ABC Analysis of Cycle Counting (Physical Inventory)
PURPOSE
This report runs an analysis for the chosen material types in the cycle counting method of physical inventory.
FEATURES
The analysis takes into account the consumption (usage) or the requirements values of the selected materials for the desired time period. You can decide whether you want to analyze:
Only materials that have a cycle counting indicator
All materials; that is, including materials that have no cycle counting indicator.
Regards
Anand

ABC analysis for Cycle Counting.

Hi SAP gurus,
I am facing a problem from the user. While doing the ABC analysis for cycle counting using the Transaction MIBC, he is getting an error " table T159c is not maintained for plant XXXX". when i checked it SPRO cycle counting is not done for that particular plant.
My question is : Where do we maintainc CC Physical inv indicator ? I have checked at material level in Gen.Plant/Sloc view, it is not maintained . so may be they have maintained at Plant level. where do we maintain at plant level.?

Hi
1) Maintain the Percentages against A,B,C,D cycle counting indicators in OMCO
2) Perform MICN to schedlue the batch input session for Creation of physical Inventory documents
3) MIBC-For ABC analysis for Cycle counting .
Note : the percentages maintained in OMCO will decide on the classification of the material as to when the Physical inventory needs to be done based on either the consumtion values/Requirement values
Regards
Sandeep

Cycle count ABC report from MBEW, MARC, MLGN, MLGT

Similar Messages

Maybe you are looking for