CYCLE COUNT ENTRIES화면에서 ADJUSTMENT TAB이 활성화되지 않음

제품 : MFG_INV
작성날짜 : 2004-05-20
CYCLE COUNT ENTRIES화면에서 ADJUSTMENT TAB이 활성화되지 않음
================================================
PURPOSE
Problem Description
Cycle Count Entries화면에서 Adjustment tab이 disable되어 있음.
Workaround
N/A
Solution Description
select cycle_count_header_id, cycle_count_header_name,
onhand_visible_flag
from mtl_cycle_count_headers
where cycle_count_header_name like '&cc_name'
위의 SQL을 수행하였을 때, on_hand_visible_flag이 '2'가 나온다면, Adjustment tabl이 disable되는 것이 정상입니다.
Inventory->Counting->Cycle Counting->Cycle Counts에서 새로운 Cycle Count
를 등록할 때, Scope and Control tab에 있는 Display System Qty를 체크하면 Adjustment tabl이 활성화됩니다.
Reference Documents
Bug 3039903

Similar Messages

Cycle Count Entries Form not showing specific employee name in "Counted By" LOV List

Cycle Count Entries Form not showing specific employee name in "Counted By" LOV List.But the Employee is active . Is there any setup for this activity?

Hi,
This is because the query is excluding the current site you are trying to modify since it is actually in the report.
You can include in your query:
or site_id = :Pxx_SITE_ID
Where Pxx_SITE_ID is the item holding the site_id value and xx is your page number.
Thank you,
Erick

Regarding Cycle Count Entries

Dear All,
I am doing cycle counting in which I have 10 Items in my subinventory. I have completed ABC Analysis and classified first 2 items as A and next 3 item as B and remain 4 items as C. Even I have performed Cycle Count as well.
In Cycle count entries i am not able to enter count quantity for my entire 10 items instead it is showing only 6 items only. Why I was not able to see remaining 4 items and how do I enter count quantity for those missed 4 items?
What would be the solution if i want to see all my 10 items in in cycle count entries form?
Edited by: SaroR on Jan 20, 2010 6:58 AM

Can you check mtl_cceoi_action_pub.import_CountRequest api?
Please make sure you carry out the following before calling the API.
1. Create a Cycle Count
2. Enter a Manual Cycle Count Entry.
3. Run program "Perform Complete Cycle Count" to generate generate cycle count request
4. Post the count Entries using the by calling the API using your Script.
Check the following MOS notes.
Cycle Count Request Import (MTL_CCEOI_ACTION_PUB API) Fails When Using Serial Number Multiple Per Request [ID 1468453.1
Cycle Count Api Not Working For Scheduled Counts [ID 786497.1]
The Cycle Count Open Interface Is Not Working For The Stock In Api [ID 818977.1]
Cheers,
ND
Use the "helpful" or "correct" buttons to award points to replies / Mark the thread as answered, if your question is answered.

Adjustment Tab is greyed ...how?

The 'Adjustment' tab under 'Cycle Count Entries' for a couple of organizations are greyed out. For most other inventory organizations, it is clickable;navigable.
Is this any setup issue? in Org setup? in cycle count setup?
pls. advise.

where exactly is the 'Display System Qty' flag ? which screen? I checked the Inventory>Counting>Cycle Counting>Cycle Counts , which displays all the cycle counts that are defined already. I click on 'Counts' to get to the 'Cycle Count Entries' form for that particular cycle count.
can't locate the flag though. Can you pls give me more detail on that?
thx so much.

Add new batch during count entry (for cycle count by quant LICC)

Hi! We are using LICC for cycle counting by quant as we have mixed storage and do not want to count all the materials in a single bin. Most of the materials involved are batch-managed. One issue we have is we may discover other batches during stock take. In this case, how can we add this to the stock adjustment since we cannot add new item when we use cycle counting by quant?
Appreciate your suggestion in this case.
Cheers!
SF

Hi,
Whenever you find discrappancies, in this case founds, you will note these down and first do an analysis whether this particular batch has been written off in the past as lost. When not, you will make a MB1À or MIGO booking to add this found batch to stock. When yes, you could do a reversal of the issue or do a new receipt.
MdZ

Cycle Counting procedures in ECC 6.0

HI all.,
SUB: Cycle counting in ECC 6.0 with WM implemented
Ref : Industry : Apparel
What would be the differences in the cycle counting procedure working on Version 4.6C and ECC 6.0.?
In 4.6C , we normally change the indicators of A,B,C or D in OMCO and set the parameters of frequency of cycle counting , say yrly, half yearly, quarterly or monthly.
Would the cycle counting procedure be the same with ECC 6.0?
I understand that from Version 5.0, we can do cycle counting without freezing the book stock i.e have open transfer orders unlike in 4.6C wherein we have to stop GR or GI at the time of cycle count.
Is the procedure same in ECC 6.0 ?
Do educate further on the Cycle count procedure for ECC 6.0 with WM implemented for an AFS related industry.
Thanks

Hi,
Try this it worked for me though,
1. Goto SPRO_ADMIN
2. Select the Project
3. Choose Change
4. Go To Transport Requests TAB
5. Activate CTS Functionality
6. Save it after the Pop Up
7. Go to Se10 and check if the Project Field is getting Populated with the Desired Project or not.
Regards,
Nitin

Cycle count in IM

does cycle count in IM at storage location level for serialized material allow the entry of serial numbers when enetering the count?

Kiran,
If your material carries a serial no. profile that has a serialization attribute of mandatory, then yes once you enter the count and hit enter, it will ask for serial nos. to be entered as well.
Thanks,

What is the Significance of Late Days in Cycle Counting

Hi All,
I would appreciate if you could someone please let me know the significance of "Late Days" under Scope and Control tab in cycle counts form while defining.
We are using 12.1.3 version.
Regards,
John

Late Days tells when a scheduled count should be considered late.
So if you make late days = 5 and if you schedule a cycle count today. After 5 days, it will be considered late.
AFAIK, this field is not used in Oracle. But you can use it in reports.
Sandeep Gandhi

Cycle Counting is not fetching All Items in Different Classes

Hi All,
My client has performed cycle counting. Ideally system has to fetech all the items in different classes. But in cycle counting listing report only able to fetch few items.
Please let me know are we missing something ?
And please let me know the significance of "Assign Items". How to put the same.
Regards,
John
Edited by: 911765 on Mar 14, 2012 4:36 AM

1) CC won't fetch all items in all classes.
It will look at only those items that are present in the assign items screen.
It will only consider those items which have cycle count enabled flag set to Yes in item master
It will only consider those items that have a non-zero frequency for the ABC class of the item.
It will only print those items that have some onhand if you run the CC to ignore zero onhand items.
2) You can either manually add items to a CC in the assign items window.
OR
You can reinitialize or update the CC (by going to the 3rd tab on CC screen)
Make sure that you have run ABC compilation so each item has a ABC class. You should also specify the frequency for each ABC class.
Sandeep Gandhi

Warehouse Management Cycle Counting Method

Dear All
I am new to WM and would like to carry out Physical Inventory in Warehouse.
However if I use transaction like LI01N I have to create a Physical Inventory Document for the entire Bin.I want to create Physical Inventory Document only for few materials and not for the entire Bin.
In that scenario I have to use Cycle Couting method ie LX26 for certain materials however in that case n physical Inventory Doc is created.
Can anybody let me know regarding?
1.Is there any way that I do not use Cycle Counting method and still create Inv Doc not for Bin but for selected materials.
2.If I have to use cycle couting what steps I am missing,I have already set the cycle counting Indicator in material master but still when I execute LX26 and go to list and create Physical Inv Doc the system is not creating any document.
Regards

so when you say you already did the below steps, then it means you added the indicator in the material master and the CC entry is also updated in the transation OMNK. So that's why when you execute the LX26, you see some entries.
In LX26, when you select the item and trying to click the Activate Documents, what does the log message says. It should say either open transfer order exists or bin blocked or anything.
Even you can try LICC to create inventory document by quant, if you have multiple quant in that bin.
2.If I have to use cycle couting what steps I am missing,I have already set the cycle counting Indicator in material master but still when I execute LX26 and go to list and create Physical Inv Doc the system is not creating any document.

Physical incentory - Cycle counting

Dear MM consultants,
I am using PI cycle count process,
It is a fresh client so no consumption update a so f now. We assigned ABC indicator in material master.
When i execute MICN tcode i am getting " no material found for PI '
Kindly guide me how to fix
Thanks
A.Gururajan

OSS note 518418
In principle, the program calculates the planned date of physical
inventory according to the following formula:
planned date = base date + Interval (Trans.OMCO/Tab.XT159C-ININV)
Usually, the base date is the 'date of the last physical inventory'.
Depending on the type of the stock or the batch management
requirement, this date is read from one of the following table
fields:
MARD-DLINL (Normal materials)
MCHB-CHDLL (Batch materials, separately valuated materials)
If no physical inventory has been carried out yet and if this date
field is therefore empty, the system uses the creation date of the
material as basis date. The basis date then comes from one of the
following table fields:
MSTA-ERSDA (Normal materials)
MCHB-ERSDA (Batch materials, separately valuated materials)
Since the cycle counting physical inventory always runs for the
current fiscal year, the earliest possible physical inventory date
is the 01.01. and the latest possible physical inventory date is the
31.12 of the current year.

Perform Full Cycle Count - No Data Found

I am trying to initialize a full cycle count for all items in a subinventory. I have a recent ABC compile set and a new cycle count setup. A, B, C and D classes are all set to count 1x per year. I have verified that all items from the compile are no in the cycle count. I submitted a "Cycle Count Scheduler" request and ensured that it completed. I then set all the parameters in the "Perform Full Cycle Count" request and set to save to file. After it completes and I view the output, the file says "No data found". My only recourse is to dump all items from Material workbench and use Data Load to enter them in ( a bit tedious for 900+ items). Is there anything I need to be doing different?

You mention that you have done the ABC setups.
But in Cycle count setups, have you defined a cycle count schedule?
And more importantly, in cycle count classes, have you entered the frequency at which each class should be counted?
Last but not the least, what is the last count date (on the serial and schedule tab)?
If it is today, you will have to wait till tomorrow.
Hope this helps,
Sandeep Gandhi

Cycle count Process - T code MI04

Hi all,
I am having a doubt in cycle count process.
I have created some CC document using MI01. When I go to MI04 to enter actual count; I could see that some of the line itmes are non editable. One observation is that; column ZC (Zero count) against non editable material is set as clicked.
what does it mean to have ZC (Zero count)indicator clicked.
also even there are some material in same documents for which available quantity in SAP is zero; still they are editable and ZC indicator is not marked.
kindly guide.
regards,
Parshuram

Someone must have entered the ZC.
Quantity field cannot contain 0. SAP does not consider it as an entry. Hence if you find that there is no stock for an item, you select ZC (to signify 0 stock) since you cannot enter 0 in quantity.
Hope this answers,
Lakshman

Scanner program for warehouse cycle count inventory

Hello Expert,
We have Handling unit management, Warehouse. We are using standard SAP cycle count procedure to count bins and to carry out physical inventory.
We would like to use scanner/ RF to carry out physical inventory to reduce time and efforts.
Can you please provide me some detail about different programs that are already available for warehouse cycle counts?
I would like to know which program would be ideal for us to use to replace our manual cycle counts.
Please provide all possible detail
Thank you very much for your help.
Regards,
NEal

If you start here:
Mobile Data Entry (LE-MOB) - SAP Library
and go through the inventory counting menu it will explain in great detail the available options.
As per standard LM58 can be used for system guided and LM60 can be used for user initiated counting process.
There is a great deal of information about creating and assigning inventory count documents,counting, recounting and clearing of differences that is easy to find please make some effort to search for such information before posting.

Urgent help on cycle count

Hi,
How can i do Itemwise cycle count irrespective of the locations
Scenario:
Item ABC is lying in multiple warehouses. While physically doing the cycle count for Item, the exercise is carried for all warehouses where the item exists.
i.e Itemwise cycle count irrespective of the locations.
Thanx in advance.
Regards
Rasika

Hi Rasika
First define the Cycle count
Path:
Admin=>Setup=>Inventory=>Inventory Cycle
Fields(Name,frequency,alert,time)
Connect this cycle count to the Item Group
Path:
Admin=>Setup=>Inventory=>Item groups (Cycle count field)
Connect the corresponding itemgroup to the items
Now you can see in the Inventory tab of item master data the cycle count details
On the particular date and time it will give u an alert
Now you can go to the Inventory=>Inventory transactions=>Initial quantities
In the Inventory tracking tab:
Enter the counted in whse against the item
If there is any difference in the quantity stored with the quantity counted it will make that difference in the stock posting
Once you had updated the stock posting it will post the difference (i.e, it will update the stock as well as the valuation)
This u have to do individually for the different warehouses
HTH
Have a nice day
Regards
baskar

CYCLE COUNT ENTRIES화면에서 ADJUSTMENT TAB이 활성화되지 않음

Similar Messages

Maybe you are looking for