Cycle count for serialized material

Guys,
When we do cycle count for serialized items, it pop up to enter serial # when updating the count. Is there any BADI/User exist to skip this step in counting for serialized materials. We dont want to enter serial#, since volume is hugh and serial# is of less important, only count matters.
Regards
TGB

Once you active the series number, then all the material need marked and managed with series number.
and stock counting need under series number.
it will cost more time absolutely than no series number.
if you think the series number not important, you can Deactivate serial number.
But please note, the reason why you use serial number is to manage the material one by one against the series number.
NOT just count the quantity.
Edited by: JiQing Zhao on Apr 19, 2011 9:45 AM

Similar Messages

  • Can standard program RMCBIN00  calculate cycle count for 2 years?

    Hi Experts,
       Can any one clarify my doubt.
               The calculation of cycle counting period to be two (2) years rather than the one (1) year that standard SAP uses. The cycle count indicators that determine the frequency of the counts for each material need to be used in conjunction with the 2 year cycle. Is  standard RMCBIN00 calculate for Two year cycle count??
    Moderator message: not directly related to ABAP development, please have a look in the respective functional forum.
    Edited by: Thomas Zloch on Apr 5, 2011 4:14 PM

    Hello,
    You can do cycle counting with Rf transaction LM59 for the serialised material.
    1.My experience says when you have HUM activated then to track material HU & serialisation profile works together.
    2.You can do cycle counting of serailised & non serialsed material through Rf gun but clearance of this material will be issue. You may have to create one more transaction to clear the difference of  serialised materials like LI20
    Hope this input helps.
    Regards,
    Prashant

  • Inventory count for subcontracing material

    I want to take the inventory count for the material with subcontracor on 31st march 2008 (previous period).
    I have tried to know the stock with subcontractor using T-code ME2o, MB5B, MBLB but I'm not getting desired results(i.e stock values on 31st march).
    Is there any other/alternate way.
    Please suggest.
    Nitin Raut
    Edited by: NITIN RAUT on Apr 22, 2008 7:07 AM

    Inventory count is used for counting internal material which means within plant and storage location.
    To see stock provided to vendor use tcode ME2O.

  • Average Maximum Cycle Count for Early 2008 MacBook (Black)

    I have a black early 2008 MacBook that now in its fourth year, and I have noticed that battery health have started to diminish.
    I am wondering what is the maximum battery cycle count for the early 2008 black MacBooks, and if its time to replace it? (I have 250 cycle count, with 78% health remaining)

    You can get a new third party battery fairly cheap on eBay. Every MacBook from 2006 through Mid 2009 except the Late 2008 Aluminum Unibody and the Late 2009 and 2010 White Unibodies use the same A1185 battery.
    Black Batteries http://shop.ebay.com/i.html?_nkw=macbook+black+battery&_sacat=0&LH_BIN=1&_sop=12 &_dmpt=Laptop_Batteries&_odkw=macbook+white+battery&_osacat=0&_trksid=p3286.c0. m 270.l1313
    White Batteries http://shop.ebay.com/i.html?_nkw=macbook+white+battery&_sacat=0&LH_BIN=1&_sop=12 &_dmpt=Laptop_Batteries&_odkw=macbook+black+battery&_osacat=0&_trksid=p3286.c0. m 270.l1313
    Or for $129 from The Apple Store  http://store.apple.com/us/product/MA566LL/A?mco=MTY3ODQ5OTY

  • Good receipt for serialized material

    Hi
    We are using Serial number functionality. When we do good receipt for serialized material, we canu2019t enter more than 6 serial no together. Generally we used to procure 50 -100 materials. We will get serial no to excel sheet by barcode scanner. But when we entered in SAP, system allows only 6 material .
    Is there anyway we can copy from excel sheet and paste it in SAP all materials together.
    Thanks
    Jeny

    Hi
    Yes there is a way of uploading more than 6 materials at a time in MIGO screen,
    You need to  first upload or create the serial numbers for the material using an LSMW for IQ01 & here donot give any plant or storage location specific details
    At the time of Goods receipt Copy the material serial numbers by clicking on find in MIGO in serial number tab, you need to enter the material & serial numbers copying from the excel sheet & click execute this will list all the serail number , you can select them all & copy into the MIGO screen.
    This is how we didi it in our system.
    Thanks & Regards
    Kishore

  • We look for BAPI/Function to As-Built for Serialized Material (tran.COIB)

    Hello ,
    We look for BAPI/Function to As-Built for Serialized Material (transaction COIB).
    We check transaction COIB in order to create insatlled base for production orders(bill of equipments)
    We look for BAPI/ Function in order to run that process automatically in background base of some rules we will decide. Do you know if there is BAPI/ Function  refer to it?

    Sorry but I found the function group IBPP with the function modules:
    IBPP_CHANGE_IBASE
    IBPP_CREATE_IBASE
    IBPP_GET_IBASE_DOWN_ALL
    For our requirements these fmodules are sufficient.
    Regards

  • Recurring for Serialized Material

    Hi
    Our Client want a  Recurring test  for Serialized Material
    I am trying with Standard QA07  but no getting proper Result.
    Also unable to find the Proper solution on SCN and Other SAP site.
    Thanks in Advance

    Hello Ashish,
    For Recurring inspection to work material has to be Batch managed.
    Is it Batch managed? If yes,
    What are the settings you have maintained in material master?
    Amol.

  • Problem with an enter inventory count for a material with serial number

    Hi all,
    I must post an Enter inventory count with the transaction MI04 for a material with serial number that it has more 250,000 of serial number, but the system give an error message of dump.
    Are there any alternatives to post the inventory document?
    Thanks.
    Best regards,
    Gaetano

    you can't but uplaod using LSMW rather entering manually otherwise you need coremod

  • Cycle count of Serialized parts at WM level

    We have serilized parts in WM locations and question is how to do the cycle count these?
    Thanks for the

    Hello,
    Based on my understanding . You are receiving goods with "E" stock ( special stock indicator). This E indicator comes with sales order number and line item will be stored( ex: E '151'000020) in the IM and WM stock. (you can see this in LS26/MMBE once you receive).So you canot issue this item for another line item of the same order. Coming to the questions you raised
    1. "whether we could maintain stock at WM level without account assignment?".
    What ever comes from IM will be the same in WM. So you can not change the stock indicator value only in WM while issuing goods to a specific on hand orders with "E" indicator. I hope you should do a process change either in SD/IM area than in WM. Because  you said that "product (Fabric) has quite a lot of characteristics such as Width, Shrinkage, Shade only after the inspection process do they know which SU satisfies".
    and So when you are creating a sale order of that kind you should have either not having the specific purchase( E stock ) or should have a BATCH with characteristics. OR you should transfer the stock to quality for quality inspection and then make available for issue. Either way you need to see this issue beyond WM level because this is a process of (SD/IM/FI) cross function.
    2. "is there any way i could do a continous count for material & SU without taking into account the SO/LI.?".
    I hope NOT.
    I could not understand yardage problem while counting.i don't know if any physical material handling problem in warehouse will intern effect of your continuous counting.
    I Hope looking more options in Batch/quality/sales order areas will certainly help you..... thanks
    tkreddy

  • Automatic goods movement for serialized material

    We are confirming a material which have two components.
    Both the components are serial number managed. can we post automatic goods issue for those components while confirming the header material using backflush indicator or in any other way?

    Hi, I  believe standard SAP does not supports automatic goods movement for the serialized material.
    Regards
    Edited by: Sarvan on Mar 25, 2010 4:33 PM

  • MacBook Pro 2011: Inconsistent cycle count for battery

    hi folks,
    i observed some strange behavior of the cycle count reported by the system.
    when i got the machine the count was at one.
    after loding the system twice the count was already at 6 cycles. (i really attached the power cord only twice and the system got continuous power. once i observed the the cycle counts changed while being on battery).
    did anybody observed that behavior as well?
    thx
    stlei

    The way the cycle count work is by percentage... eg if the computer runs on battery it has a 100% charge when full. If you discharge it 20% consider that 0.2 of a cycle count, these small percentages do add up. Now if you keep your computer plugged in all the time and you are experiencing these weird cycle counts and honestly have kept the adapter plugged in ALL the time, then please try to do a SMC reset (Shutdown the computer and make sure the charger is plugge in. Hold down the left shift key, the left control key and the left option key. Once those are held down press the power button, release the power button then the keys. Wait 5 seconds and boot up the machine.) If you are still having issues please call 1-800-APL-CARE... Apple is investigating strange hardware issues and the engineers would like to take a look at your computer.

  • Cycle Count - Serialized Materials???

    Hi,
    We need to cycle count our serialized materials. Please let me know what is the procedure and how can we enter the serial numbers to the count??
    Please advice,
    sen

    Thanks for your qucik reply.
    Let us say if i have a material of 10 ea with 10 different serial numbers. How i can cycle count one particular serial number??
    Thanks,
    sen

  • Inbound Idoc function module  for Cycle count with msg type WVINVE

    Can any one tell me which is the standard function Module which processes Cycle count for message type WVINVE.
    My requirement is to setup Inbound Idoc for cycle processing with message type WVINVE.

    Hi Mukesh,
             Inbound FM is IDOC_INPUT_STORE_INVENTORY , and Process code is WVIN.
             Yoou can check this in Tcode WE42 for process code WVIN.
    Regards
    Srikanth M

  • Changing Valuation Type for Non Serialized Material

    Dear Experts,
    May i know how to change the valuation type for Non serialized Material.
    Scnerio :
    Issued New  Material from warehouse with Valuation type -C1,
    Once i used shop floor it damaged and now i want to return back to store with Valuation type C3.
    May i know how can i do this.
    Regards,
    Kavvya

    Hi Seenu,
    Actually when i am using t-code IE4N and changing the valuation type C1 to C3 without changing the valuation type the system return the material to store. But for serialized material first i changed the valuation type through IQ02 then i am using the IE4N.
    But  i dont know how can i cahnge the valuation type for Non serialized material.
    Also may i know why i am facing problem in IE4N, Is it required some configuration to directing changing the valuation type in IE4N itself.
    Kavvya

  • Cycle count in IM

    does cycle count in IM at storage location level for serialized material allow the entry of serial numbers when enetering the count?

    Kiran,
    If your material carries a serial no. profile that has a serialization attribute of mandatory, then yes once you enter the count and hit enter, it will ask for serial nos. to be entered as well.
    Thanks,

Maybe you are looking for