Cycle ends 10/16/2014

What does cycle ends 10/16/2014? Does it mean my min,text and data start over at 0? If so when cause it's still showing all my usage.

The cycle ends the 16th (today). At midnight, the 17th, everything will reset to 0 - your online numbers may not show the reset for 24-48 hours. Things tend to "freeze" on the last day of the cycle for a day or two, then it resets and shows current usage again.

Similar Messages

Don't die after your billing cycle ends cause they will still charge for the following month

My husband passed away on Thanksgiving day but becaude my billing cycle ended on the 20th, Verizon is charging me $30 for the next month even tho I cancelled his phone. thanks for the compassion

I'm very sorry for your loss.
Yes, that's the way it works.
Best wishes to you.

I am being charged for 3 GB that apparently Verizon hadn't caught up on that I had used!! The last night of my cycle I called and checked and I had .5 GB left and right before midnight when the cycle ended it caught up on 3 GB!! I now have to pay for this

SO CRAPPY!!! SO FED UP WITH VERIZON!! WE ARE GETTING SCREWED OVER!! I am being charged for 3 GB that apparently Verizon hadn't caught up on that I had used!! The last night of my cycle I called and checked and I had .5 GB left and right before midnight when the cycle ended it caught up on 3 GB!! I now have to pay for this data I know I did not use! I never have my data on!! Now it says I used 7 GB last month!!!

Data usages are always estimated...I don't believe any carrier post data usage in real time. I've had my data increased due to a large chunk being unaccounted for at the time of my cycle. Thankfully when I'm billed for it...it has never pushed me over my limit.

Warp Stabilizer analysis process stopping and never ends (AE CC 2014)

I'm running the latest 2014 AE CC and I've been getting this issue running Warp Stabilizer on my clips. Intermittently, warp stabilizer analysis process would stop at certain frame and never ends. I have to quit / kill AE.
I'm running AE on 15" retina macbook pro 2013 with dedicated nvidia 750M video card, 16GB of RAM and plenty of disk space (over half a terabyte left), running Yosemite 10.10.2.
Has anyone experienced this? How do I solve this issue?

"During the analysis and solving stages, the Warp Stabilizer effect and 3D Camera Tracker effect use memory outside of the pool shared by After Effects and Premiere Pro. Therefore, you can allocate more memory to the analysis and solving phases for these effects by increasing the RAM Reserved For Other Applications value in the Memory & Multiprocessing preferences."
Thank you for that link. I'm going to check the "RAM Reserved For Other Applications" and increase the value if it's too low.

Ellipsis jetpack mismatch data usage with alerts

Ok, I have the ellipsis jetpack and for the past couple months I've had varying data usage issues...
This month, it mysteriously used more than 2 gb of data minimum without anything to my knowledge, being connected to it.
So I up the data and just dismiss it as the PlayStation 4 bring on and "the crew" coming out, since it may have updated content while I was sleeping for the other 9 gb.
But this morning, I have an email saying I've used 90% of my data allowance (of 20 gb). email time is 1:52 am, yet both the website and the jetpack show the data usage as of 6:18 am today 12/13 to be 15.3 gb (website says like 15.336).
This is frustrating to say the least, and really makes me like Verizon is trapping me into paying more money!
I also have family guard on the device and it's currently set to not allow more than 17 gb. It's been setup that way for probably a week now.
Also, before I upped the data cap from 10gb, I got two alert emails for each alert level, hours apart.
The first 50% was around probably 10 am, the second was late that night, after eight, I believe. Right around that same time, I got a 75% followed by 90, and later, another each of 75 & 90.
Imagine the frustration! Especially now that I'm paying an extra 4.99 a month to protect myself from going over the usage limit!
I was playing a ps4 game last night online (the crew), but didn't download anything outside of that, and watched a video or two on the net, both were short videos. All worked fine, and didn't have the email alert until this morning when I woke up.
Also: this is my first post, done from a tablet, so I'm sorry if it goes to wrong place

SHARED DATA DETAILS
Cycle Ends: 12/15/2014
Total Shared Data Used
15.366GB /20GB
Estimate as of 12/13/2014 12:51 PM
And yet I have an alert that says I've used 90%.. Copy/pasted below
Fri Dec 12 2014 11:52:56 PM from 900080002020
Verizon FamilyBase Msg: You have used about 90% of your data limit. When you reach your limit, your data use may be restricted for the rest of the cycle.
I have a 20 GB plan. 90% of 20 GB is 18 GB.

When will I get the final bill. Billing cycle is already over

Hi, I ported my verizon number out on 12/25/2013, my billing cycle ends on 01/12. But I still havent received any email/mail regarding final bill.
I even went to the link www.vzw.com/paymybill and entered my account number, it says 0.0 balance. Is this my final bill? Typically how many days it takes to get the final bill invoice generated after the billing cycle ends?

ajayk2k7 wrote:
Hi, I ported my verizon number out on 12/25/2013, my billing cycle ends on 01/12. But I still havent received any email/mail regarding final bill.
I even went to the link www.vzw.com/paymybill and entered my account number, it says 0.0 balance. Is this my final bill? Typically how many days it takes to get the final bill invoice generated after the billing cycle ends?
If you paid your last invoice (pay in advance) from December 12, 2013 through January 11, 2014 there should be no further invoice due. However if you had any overages, early termination fees owed they should be mailed to you.
You ported out way before your bill end date so you should be OK.
Good Luck

HELP!Do I need pay another $400 termination fee for iphone 4 if contract will end at September?

I have a contract of family plan, and my line is the primary line. I am eligible for upgrading at the discounted rates my contract will be ending in September 2011,and I have paid for $400 termination fee without a security number. I am wondering if I am supposed to pay for another $400 termination fee or the Verizon will just extend the return date of my termination fee( only extend mine or all of my family plan members').

Nothing will happen on the day your contract is up. You will continue on as a Verizon customer UNTIL you take action to change that. Your plan will not change, the amount you are billed will not change, nothing will change except that you will no longer be under contract.
If you initiate a port after your contract is up, whether it is 1 day, 2 weeks or 6 months, you will incur no ETF and will only be liable for the monthly billing charge for your current billing cycle AND any overages if there are any. Nothing more.
If you are near your contract end date, there is no benefit from porting out before the actual contract end date, only penalties.
Furthermore, it is unlikely your contract end date coincides with your billing date. For example, my contract end date is 12/4/2014 and my billing cycle ends on the 15th of the month. If I cancel/port my line on 12/5/2014 OR on 12/10/2014 there will be NO difference in the amount I will owe Verizon as long as I cancel/close/port my line BEFORE 12/15/2014. Keep in mind, most carriers will tell you it can take "up to 5 or so days" for a port to complete, so I would suggest accounting for those days when initiating a port. In my case, I would initiate a port by 12/9/2014 IF I were port my line to another carrier.

Can we post entries in 2014 and 2015 fiscal years simultaneously

Hi,
Now we are in fiscal year 2015.Still postings are going on for FY2014.Not yet done any year end activities for 2014.Client is asking to open posting periods for fiscal year 2015.They want to post in fiscal years 2014 and 2015 as well simultaneously. Is it possible? If possible,what are the precautions we need to take ?
Thanks

Hi
Yes if you have special period defined for 2014
or keep both Fiscla period open in FI .
in MM you should be able to post only in period 12 of fiscal year 2014 . so its depend on what sort of entriews you want to post

Need help with creation of Payment Cycles

We need you to determine a way to sum up the Measure "Prod Matl - Std" into Payment Cycles of the 5th, 10th, 15th, 20th, 25th and 30th of each month. Company only pays suppliers on the Payment Cycles indicated above.
General Rules:
     Days:          Paid on:          Example:
     1 - 5          Day 5          2008-08-01 through 2008-08-05 are all paid on 2008-08-05
     6 - 10          Day 10          2008-08-06 through 2008-08-10 are all paid on 2008-08-10
     11 - 15          Day 15          and so on…
     16 - 20          Day 20          and so on…
     21 - 25          Day 25          and so on…
     26 - 30          Day 30          and so on…
Exceptions to Rules:
               Paid on Day:          Example:
1.)     31st of any month          Day 5 of the following month          2008-08-31 is paid on 2008-09-05
2.)     Since the month of February only has 28 or 29 days, payment for the 26th-28th of Feb will occur on Feb 28th. If it is a leap year and February has 29 days, then the payment for the 26th-29th will occur on Feb 29th.
Comments:
Please feel free to add new measures, UDAs and any formulas necessary to accomplish the objective.

The best advice I can give is to mock it up on a spreadsheet as follows:
Columns: Time periods, highlight all periods (columns) that are payment cycle end dates.
Rows: Item 1 = Amount Due, Item 2 = Amount Paid, Item 3 = Due This Cycle
Now, all you need is to take each column and on the highlighted columns and put a formula into the Item 3 line that takes the sum of amounts paid and subtracts it from the sum of amounts due. These can run from the beginning or just back to the previous highlighted column.
Once you have it mocked up, the formulas can be converted and members added to support it. You'll also need to get the people that make the payments to book the items, etc..., but that might already be part of the bigger picture.
You will need to fine tune the results for roll-ups. You can either use time balance last members or create a member to store the current due/current paid elements as a running total. These are all style points though -- the bottom line is that if you can't model the process in excel or code it in essbase, you need to bring a good consulting organization in. It wouldn't take long for them to help, and I can recommend a couple in particular, but without knowing a lot more about your outline and constraints it would be very difficult to point to any one direction with certainty.

Remote Resources: "A problem with the system proxy caused the connection to fail: End of file"

Hi, I am trying to use "Remote Resources" on the current version of the Microsoft Remote Desktop for Android app, I can input the webfeed and it even shows the apps that I have configured on the server for "Remote App", sadly whenever
I try to load any of the RemoteApps, I receive an error stating " A problem with the system proxy caused the connection to fail. End of File".
I don't know what I can do to fix this, I've tried many things to no avail, also, normal Remote Desktop connections from the Microsoft Android app work flawlessly to the server.
The relevant log is the following:
[2014-Jan-09 04:40:54] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
[2014-Jan-09 04:40:54] RDP (0): Final rdp configuration used: memory bookmark [
label
hostname DIAZSERVER
port 3389
loadbalanceinfo
ui.swapmousebutton false
remote.program ||ZWaveUtil
remote.workingdirectory
remote.name ZWave Adapter Utility
remote.args
rail true
soundmode 0
connect_to_console false
redirectsdcard true
performance_flags 134
arc.sessionid 0
anonymous_username
authentication_level 2
use_redirection_server_name false
username administrator
gateway [
host = DIAZSERVER
port = 443
bypass = false
connect info[
hostnames = [localhost]
gatewayHost = DIAZSERVER
gatewayPort = 443
routingToken = Cookie: mstshash=administrator
redirectionGUID =
proxyHost = 200.5.68.10
proxyPort = 8080
sessionId = -1
[2014-Jan-09 04:40:54] RDP (0): Using HttpConnect proxy at 200.5.68.10:8080
[2014-Jan-09 04:40:54] RDP (0): Using Basic Authentication with username ''
[2014-Jan-09 04:40:54] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
AsioEndpointContext (0): startup(): starting up down context
[2014-Jan-09 04:40:54] RDP (0): Resolved '200.5.68.10' to '200.5.68.10' using NameResolveMethod_DNS(1)
[2014-Jan-09 04:40:54] RDP (0): Resolved '200.5.68.10' to '200.5.68.10' using NameResolveMethod_DNS(1)
ASIOSocketAdapter (9): readSomething error. message: End of file. instance: 0x5d39d5c0
RpcOverHttp (9): Stream error in endpoint 0x5abbc170 : A problem with the system proxy caused the connection to fail: End of file
[2014-Jan-09 04:40:55] RDP (0): Error message: A problem with the system proxy caused the connection to fail: End of file
[2014-Jan-09 04:40:55] RDP (0): Error message: A problem with the system proxy caused the connection to fail: End of file
[2014-Jan-09 04:40:55] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
ASIOSocketAdapter (9): handleRead(): exception: Exception in file '/var/lib/jenkins/jobs/rc-android-app/workspace/rdp-layer/library/jni/librdp/private/httpendpoint.cpp' at line 489
    User Message : Failed to read from channel: -1. instance: 0x5d39d5c0
[2014-Jan-09 04:40:55] RDP (0): Disconnect initiated by client
RpcOverHttp (9): Exception in endpoint 0x5abbc170 : Exception in file '/var/lib/jenkins/jobs/rc-android-app/workspace/rdp-layer/library/jni/librdp/private/httpendpoint.cpp' at line 489
    User Message : A problem with the system proxy caused the connection to fail: Failed to read from channel: -1
[2014-Jan-09 04:40:55] RDP (0): Exception caught: Exception in file '/var/lib/jenkins/jobs/rc-android-app/workspace/rdp-layer/library/jni/librdp/private/httpendpoint.cpp' at line 489
    User Message : A problem with the system proxy caused the connection to fail: Failed to read from channel: -1
[2014-Jan-09 04:40:55] RDP (0): Exception caught: Exception in file '/var/lib/jenkins/jobs/rc-android-app/workspace/rdp-layer/library/jni/librdp/private/httpendpoint.cpp' at line 489
    User Message : A problem with the system proxy caused the connection to fail: Failed to read from channel: -1
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
[2014-Jan-09 04:40:57] RDP (0): ------ END ACTIVE CONNECTION ------

My problem is that the "proxy" is the proxy set up by my 3G configuration so, I tried connecting to the remote resources through my work wifi and I get the following:
[2014-Jan-14 16:58:13] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
[2014-Jan-14 16:58:13] RDP (0): Final rdp configuration used: memory bookmark [
label
hostname DIAZSERVER
port 3389
loadbalanceinfo
ui.swapmousebutton false
remote.program ||chrome
remote.workingdirectory
remote.name Google Chrome
remote.args
rail true
soundmode 0
connect_to_console false
redirectsdcard true
performance_flags 134
arc.sessionid 0
anonymous_username
authentication_level 2
use_redirection_server_name false
username Administrator
gateway [
host = DIAZSERVER
port = 443
bypass = false
connect info[
hostnames = [localhost]
gatewayHost = DIAZSERVER
gatewayPort = 443
routingToken = Cookie: mstshash=Administrator
redirectionGUID =
proxyHost =
proxyPort = 0
sessionId = -1
[2014-Jan-14 16:58:13] RDP (0): Not using any proxy
[2014-Jan-14 16:58:13] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
AsioEndpointContext (0): startup(): starting up down context
ASIOSocketAdapter (9): handleResolve(): boost error: Host not found. Please provide the fully-qualified name or the IP address of the host.. instance: 0x5d474090
RpcOverHttp (9): Stream error in endpoint 0x5d46b678 : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 16:58:17] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 16:58:17] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 16:58:17] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
ASIOSocketAdapter (9): handleResolve(): boost error: Host not found. Please provide the fully-qualified name or the IP address of the host.. instance: 0x5d445158
RpcOverHttp (9): Stream error in endpoint 0x5d49fa30 : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 16:58:17] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 16:58:17] RDP (0): Disconnect initiated by client
[2014-Jan-14 16:58:17] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
[2014-Jan-14 16:58:17] RDP (0): ------ END ACTIVE CONNECTION ------
Now, I know the host can be resolved because: if I connect to the same host but on a full remote desktop (as opposed to just RemoteApp on it) I have no trouble either through 3G OR through my work connection.
Moreover, I also tried directly inputting the IP as opposed to the web address of my server, I get the same error, that is the Remote Resources tab is able to access the feed (because it shows the available RemoteApps) but when I click an app it says it can't
find the Host, here's the log for the connection directly to the IP address/rdweb/feed/webfeed.aspx :
[2014-Jan-14 17:09:27] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
[2014-Jan-14 17:09:27] RDP (0): Final rdp configuration used: memory bookmark [
label
hostname DIAZSERVER
port 3389
loadbalanceinfo
ui.swapmousebutton false
remote.program ||chrome
remote.workingdirectory
remote.name Google Chrome
remote.args
rail true
soundmode 0
connect_to_console false
redirectsdcard true
performance_flags 134
arc.sessionid 0
anonymous_username
authentication_level 2
use_redirection_server_name false
username administrator
gateway [
host = DIAZSERVER
port = 443
bypass = false
connect info[
hostnames = [localhost]
gatewayHost = DIAZSERVER
gatewayPort = 443
routingToken = Cookie: mstshash=administrator
redirectionGUID =
proxyHost =
proxyPort = 0
sessionId = -1
[2014-Jan-14 17:09:27] RDP (0): Not using any proxy
[2014-Jan-14 17:09:27] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
AsioEndpointContext (0): startup(): starting up down context
ASIOSocketAdapter (9): handleResolve(): boost error: Host not found. Please provide the fully-qualified name or the IP address of the host.. instance: 0x5d372f28
RpcOverHttp (9): Stream error in endpoint 0x5dd6b168 : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 17:09:31] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 17:09:31] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 17:09:31] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
ASIOSocketAdapter (9): handleResolve(): boost error: Host not found. Please provide the fully-qualified name or the IP address of the host.. instance: 0x5d378de0
RpcOverHttp (9): Stream error in endpoint 0x5e9cc1f0 : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 17:09:31] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 17:09:31] RDP (0): Disconnect initiated by client
[2014-Jan-14 17:09:31] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
[2014-Jan-14 17:09:31] RDP (0): ------ END ACTIVE CONNECTION ------
I'm really puzzled here, I've tried checking if ports where open, and ports 443 and 3389 are wide open, I don't know what else it could be.

Billing Cycle & Payments due by Dates

I don't understand why the billing cycle ends after the bill/payment is due!
For instance if I have to pay by the 30th of the month then why does my billing cycle end a week after I paid you?
By the we are going over our already allowed plan of 40GB and you are racking up $100's of extra dollars in overages!
You are robbing me in so many wrong ways!!
Fix it!!!! You get enough money from me!
Highway Robbery!!

Hi there
This is a great guide that will be very helpful to any of our customers who wish to change their bill cycle dates! I’d just like to thank you for posting this and add some further expectations.
The balance on the prorated second invoice shows as Past Due on the customer's third invoice, even if it is not. The cycle change process does not impact their account status and corrects itself on subsequent bills. With regards to prorated charges, the customer is provided a video bill with their next statement to help explain the charges.
Thanks!
Charise

Carry fwd all items to the current fiscal year 2014

Hi All
Can someone guide me on the following attached issue?
The year had ended on June,2014.
Regards
Pankaj

Hi,
Do you use automatic budget posting? You should check these OSS notes:
1620682     FMFG_ABP017 for PBET commit.budget on change of PO del.date
1170291     Automatic Budget Posting: error message FMFG_ABP017
1329638     Message "Wrong Fiscal Year" during Automatic Budget
1265858     Message "Wrong Fiscal Year" during Automatic Budget Posting
1632145     Automatic Budget Posting: error message FM_FGABP017
Regards,
Eli

Requested end date must be later than requested start date in Service Request

Hello Experts
I am getting this error in the service request when the date displayed in UI is
Requested start date-06.05.2014
Requested End-08.05.2014
I have searched this error in the SCN, many people have posted this error . I have not got any satisfactory answer in the posts. I am attaching screenshot in the post.
I am configuring the service request.Please reply as its urgent
Thanks all of experts in advance

Hello Ashik
I am facing a new problem please help
I am currently working on service request.I am facing a problem in the date management there.In my service request i have 5 statuses .One of my status is "Pending with consumer".I am using duration settings of service request.By duration settings , i am calculating the duration for which its pending with consumer.I am having 2 response profile one is 24*7 and other is having 9 working hours.In the service request from the SLA configuration i am calculating the escalation date & Time .I need to add the pending with consumer duration with the escalation date and time.I am facing a problem , i am explaining whole problem ..
Let say if the pending with consumer duration is 1440 minutes(that is 24 hours) .I am adding the minutes to the escalation date through the date rule.
I am facing problem that if the service profile is 24*7 then there is no problem but if it is having the 9 hours working service profile then after adding the minutes to it the escalation date is changing to 4 days ahead which is wrong.
I need to add only those minutes for which it is pending with consumer in working hours for the 9 hours service profile
I need to dynamically determine the working hours from the duration then add it to escalation dates when the status is changed from pending with consumer.
Please suggest a badi will work or how to do it.Its urgent as i need to give demo.I will appreciate a quick reply.Please reply

Number of cycles using power spectrum for getting frequency

Hi,
I have a square wave that I am getting a frequency estimate from using power and frequency estimate.vi
I was wondering if it mattered how many cycles were inputted for the frequency estimate. Also, the signal may end in between cycles.
Thanks,
Jennifer

Sorry for the vague first post. The software was already written for the device and I am just trying to understand a few things in order to make some changes.
I am measuring the speed of a turning rotor using the square wave signal generated from a pattern on the turning rotor. I need to know the frequency of the square wave in order to determine the speed of the rotor. The pulse pattern is used in power spectrum and estimate frequency icons (appears to be similar to an example program for spectrum analyzer). The speed of the rotor is variable until it reaches steady state which can take minutes or hours. Speeds are not too high (Freq 1-100Hz). Right now the measurement is set up to sample a given number of points at a given scan rate. This means that the data most likely does not end exactly as a pulse cycle ends but somewhere in the middle of a cycle.
We are interested in seeing the transient change in speed from start-up to steady-state. How short of a sampling period (i.e. # of cycles can be put into the power spectrum and estimate frequency.vi's) would give reliable measurments. Right now I just scan for a reasonable time in order to make sure I get enough pulses in order to better estimate the frequency of the pulse signal.
In the future I will work with completing pulse width measurements which most likely would be the fastest I can complete a transient measurement although my data will have a bit more fluctuations. That's due to each pulse not being exactly the same width.
Hope that gives you a better idea what's going on here.

QTP crashes after long cycle runs

Product name: QuickTest Professional
Product version: 11.00
Product ID: QTPRPID11.00/01
Product build: 1018
Operating system: Microsoft Windows 7 Service Pack 1 (Build 7601)
Internet Explorer version: 9.0.8112.16421
Addins Used
.NET
Web
Problem Statement
QTP Crashes after running successfully for 180 Hours (36 Cycles)
Script Started Time - 2014-05-05 04:33:20
QTP Started to Hang Time- 2014-05-11 17:12:04
We need your Expert Advice for Improving the Performance of the QTP,
Suspect –(Possible Causes)
We would like to know , if the below mentioned setting would affect the performance of the QTP scripts in any way?
We are currently having the 2 major vbs files in QTP Scripts. Each vbs File has around 17000 lines of Code with around 160 functions. And these are loaded at the Beginning of the Automation scriptrun (Not Run Time)
And we load shared Repositories at the start of the QTP run which is about 20MB.
Will this below Corrective action Help?
if we implement the below changes, will be any considerable improvement in the Performance ?
By reducing the No. of lines in the VBS file by splitting the 17000lines VBS File into smaller Files
by loading the Functions and the Repositories in the Run Time Dynamically.

Create a new profile as a test to check if your current profile is causing the problem.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer files from a previously used profile to the new profile, but be cautious not to copy corrupted files to avoid carrying over the problem
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
Boot the computer in Windows Safe Mode with network support (press F8 on the boot screen) as a test.
*http://www.bleepingcomputer.com/tutorials/how-to-start-windows-in-safe-mode/
Do a malware check with several malware scanning programs on the Windows computer. 
Please scan with all programs because each program detects different malware. 
All these programs have free versions.
Make sure that you update each program to get the latest version of their databases before doing a scan.
*Malwarebytes' Anti-Malware: http://www.malwarebytes.org/mbam.php
*AdwCleaner: http://www.bleepingcomputer.com/download/adwcleaner/ http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
*SuperAntispyware: http://www.superantispyware.com/
*Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx
*Windows Defender: http://windows.microsoft.com/en-us/windows/using-defender
*Spybot Search & Destroy: http://www.safer-networking.org/en/index.html
*Kasperky Free Security Scan: http://www.kaspersky.com/security-scan
You can also do a check for a rootkit infection with TDSSKiller.
*Anti-rootkit utility TDSSKiller: http://support.kaspersky.com/5350?el=88446
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

Cycle ends 10/16/2014

Similar Messages

Maybe you are looking for