Cycle / Loop Drops Notes when reaching end of loop

Hi there!
Very annoying situation seems that when I first create a song, put a cycle/loop on four bars (cycle range) it goes round and round fine, no drop outs.
I picked up a song I did three days ago, changed nothing and it seems when it gets to end of 4th bar and goes back to first bar I get drops/pauses sending midi notes to my synth. As I have jam pack layeers in the song, if I mute the midi, I realise that the jam pack layers sound as they should do - it's just the midi that skips/drops.
If I take off the cycle range and loop the layers then there are no drops. Any ideas would be much ly appreciate, this is rather pain!!
Many thanks,
Philippe

I have had this happen sometimes. It depends on what "voice" your MIDI notes are playing. Some of them have things like reverb and echo on them that require the playhead to move beyond the region to output the sound. Sometimes you will only get the sound cut off too quickly.
If you move the cycle region beyond the end of the segment you should be able to hear the notes.

Similar Messages

DVD doesn't return to main menu when reaches end - Why? How?

My DVD plays through full movie and then essentially just stops at the end vs returning to the main menu. The menu button doesn't even return it at that point. What can I do to make it return to the main menu when it reaches the end?

I'm having a similar issue...
In all the previous projects I've created with iDVD, the movie always automatically returned to the DVD main menu at the very end of the presentation.
On my current project using iDVD 6.0.2 (787), this is not occuring. At the end of the DVD presentation, the screen continues to stay black until the "stop" button is depressed.
I'm obviously frustrated because I have looked everywhere in "iDVD Help" and within the on-line support discussions for an answer, but to no avail.
I don't think that it's a DVD media issue because the problem occurs on iDVD when previewing (and obviously on the DVD media after burning).
Does anyone know why this is happening? Is there a special command, tool, or secret handshake I need to provide in iMovie HD, or iDVD? Any insight is most appreciated.
-j

I want to play 1 playlist on continue all day how do I get it to repeat when reaches end?

Please help

On the left side of the Now Playing screen right below the scrubber bar is the Repeat icon/control. It is the arrowed racetrack. WHen white is it no repeat, when it has a 1 in the lower left it repeats the song. when just bluit is repeats the list
from the users guide:
Repeat songs
Tap .
= Repeat all songs in the album or list. (bluew)
= Repeat the current song only (has 1)
= No repeat.n (white)

Error: The e-mail server could not be reached when the system was trying to

Dear All,
I've configured the Mail Transport in Portal successfully with SMTP as MS Exchange Server and Third-party Mailing servers. But due to some licensing issues a new MS Exchange mail server have been setup replacing the existing ones.
And when i configure the Mail Transport in the system i get the below message on the eMail Window:
"Error: The e-mail server could not be reached when the system was trying to send the message!
javax.mail.MessaginException: 530 5.7.1 Client ws not authenticated
I've configured (all the steps) the same way as i used to before and restarted the server as well! Please let me know the issue to be resolved, the telnet to the mailserver is also successful. I've try'd searching SDN, didn't find the exact solution... any notes on this?
Thanks,
MS

Hi,
It will depend on your infrastructure, I am not sure and have limited knowledge on netowrks, but in my current landscape both the system were in same domain, but still i had to maintain proxy configuration.
Since it giving authentication error, it feel it could be proxy error.
Please refer below links which talks about same error :
http://java.sun.com/products/javamail/FAQ.html#smtpauth
Or else i think it is issue with port.
Regards,
Jigar Oza
Edited by: jigar oza on Jul 6, 2010 12:43 PM

E-mail server could not be reached when system was trying to send message

Hi All,
I have done the settings for mail transport. The same worked fine on development and QA. However, on production, the same settings do not seem to be working I receive message 'The e-mail server could not be reached when the system was trying to send the message', when mail is being sent out.
The settings is as follows:
1. Activate Mailing Service by going to
System Administration à System Configuration à Knowledge Management à Content Management à Mailing Service.
Ensure Active check box is selected.
2. Create System Alias by going to
System Administration à System Configuration à System Landscape
Go to content area.
Portal Content à Content Provided By SAP à Collaboration and right click.
Select New from PAR à System.
Choose the iview com.sap.netweaver.coll.app.gw and hit next button. Select Java_Mail option and hit next button. Enter appropriate System Name and ID and hit next button. Hit finsh button and open object for editing.
Select System Aliases from display option and add an alias for the system. Save changes.
3. Create Mail Transport by going to
System Administration à System Configuration à Knowledge Management à Collaboration.
   Click Groupware Transports in content area.
   Select Mail Transport on next screen.
   Click New button and create new mail transport definition.
   Give SMTP server being used in organisation, Inbox for Sent messages folder, and give
   system alias created in step 2 as alias.
4. Mail channel server too has been set up.
Thanks and regards,
Arun

Dear All,
I am trying to setup my SMTP mail in WAS7.0 SP4, my motto is to use this setting to send mail out from CAF GP (Approval Form).
I have given SMTP setting at
System Administration à System Configuration à Collaboration à Groupware Transports
System Administration à Universal Worklist & Workflow à workflow à Mail
Please tell me am in the correct part of configuration of mail or is that any other place to set configurations?
As our friend (Arun) mentioned in his first thread to activate Mailing Service, i couldnt see this setting in my WAS7.0.
+1. Activate Mailing Service by going to
System Administration à System Configuration à Knowledge Management à Content Management à Mailing Service.
Ensure Active check box is selected.+
Is there any other settings i am missing?
The error my CAF GP giving is "The system failed to send an e-mail notification to "
Your help is highly Applauded
Thanks! in advance.
Regards,
Kishore

Drag and drop not working. When trying to move a cell or icon the shadow of the cell or icon being moved appears under the cursor but can't be released causing a freeze of function within the program. Happens in finder numbers and firefox

Drag and drop not working. When trying to move a cell or icon the shadow of the cell or icon being moved appears under the cursor but can't be released causing a freeze of function within the program. Happens in finder numbers, firefox, and when trying to move any file from the downloads folder.
This is a serious pain.
Please help.
WB

Yes, all I can tell you is that Finder does not have that function in ML. Your system is "working as expected".
You can file feedback here.

CUP not updating OCS status when user ends call

Hi All,
I have an issue where, when a user places/receives a call their MOC status shows them as "on a call", 99% of the time when they end the call the MOC status changes back to what ever is was set to, i.e. Available.
The 1% of the time is will stay "in a call".
Now I have managed to trace a call from the CUP server and when the status updated correctly I can see a SIP message "ConnectionClearedEvent", however when the status does NOT change back there is no "ConnectionClearedEvent" in the SIPProxy trace file.
So I am assuimg that some thing between CUCM and CUP is failing everynow and again.
I am having a mental black and need to be pointed to the CUCM process that would pass the information to the CUP server.
CUCM 6.1.5.10000-10
CUP 7.0.3.10000-63
Any other help would be appreciated too..
Cheers
Jason

I would recommend you upgrade to CUPS 7.0.8 before troubleshooting.
In each relase between 7.0.3 and 7.0.8 there are some OCS bugs fixed. Not saying that upgrade would fix your problem. But at least it would rule out the known defects.
If there's no CSTA (INFO) message sent to OCS, the problem would be on CUPS side. It could be the CUPS lost its connection with CTIManager thus not able to get CTI event updates.
Michael
http://htluo.blogspot.com

Post Moved Galaxy-Note-dropping-Wifi-when-using-...

Pot moved http://community.bt.com/t5/Other-BB-Queries/Galaxy-Note-dropping-Wifi-when-using-HH3/td-p/671308
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

I think I found the answer to my own question (no thanks to Verizon)!
I found this article online which was written recently (2012) and explains the WIFI - Bluetooth interference pretty well. Here is the link:
http://www.ecnmag.com/articles/2012/03/wi-fi-and-bluetooth-coexistence
The way it has been explained is that if the WIFI & BT radios are on the same chip and using the same antena to send and receive, they WILL interfere no matter what. Having them on two different chips is the best way. But Frequency Isolation (Adaptive Frequency Hopping (AFH)) is a way to reduce interference when they are both on the same chip (as it is in Galaxy Note 2 & S3 - they have Broadcom BCM4330 for wifi/bluethooth/FM) which I guess needs to be addressed in a software update (or may be it already has and is not working well). The last solution is to use 5GHz band for WIFI.
There you have it. But please let me know what you think and if you have found out anything else.
Thanks

Known Issue: "DNS server could not be reached" when creating or updating a RemoteApp collection using template images for some locales

When trying to create or update Azure RemoteApp collections that use a template image for some non-EN-US locales, it might fail with error "DNS server could not be reached". You might also see error code "DnsNotReachable".

Cause: There was a issue in Azure in which decimal punctuation was not treated properly if the locale of the template image used a comma (,) instead of a period (.).
Workaround: Before a fix was applied, the workaround was to use template images based on a locale that uses a period to delimit decimals, such as EN-US.
Resolution: As of March 19, 2015, a fix for this issue has been applied to Azure. You should once again be able to create collections from template images that use non-EN-US locales. If you continue to have this problem, please
try the workaround. If that works and the only difference in the template images is the locale, please email remoteappforum (at Microsoft). If the workaround does not work, the issue is likely caused by a DNS configuration issue such as:
No valid forwarders to public DNS servers configured on your internal DNS server(s).
A valid internal DNS server is not specified on your Azure RemoteApp VNet.
A VNet or internal network configuration issue is preventing the internal DNS servers from be reached by the VMs in the RemoteApp collection.

My child page does not drop down when i preview

I am new to muse and i created my website, but the child pages do not drop down when i preview. What am I doing wrong?

Hi
I believe you are referring to sub menu items which links to child pages.
Select menu in design mode and in options please select "All Pages" in menu type. This should resolve the issue.
Please let me know if you have additional questions.
Thanks,
Sanjit

I've had a 4s for two years and today when i turned it on it told me my phone could not be activated becasue the activation server could not be reached. what should i do? i'm lost.

i've had a 4s for two years and today when i turned it on it told me my phone could not be activated becasue the activation server could not be reached. what should i do? i'm lost.

i do not know what this means. I purchased the phone brand new two years ago and have never had any problems with it. The message i am getting reads:
"your iphone could not be activated because the activation server cannot be reached. try connecting your iphone to itunes (which i don't have) to activate it, or try again over cellular connection in a couple minutes. (which i have tried several times with no success) you can also try to activate using wi-fi connection (which i do not have). if this problem persists, contact apple support at apple.com/support."

My call will not end when pushing end sign even when shut down and restarted. any ideas?

call will not end when pushing end sign even when shut down and restarted. any ideas?

Sounds like a major hardware problem.
If no change after restoring your iPhone as a new iPhone or not from your iPhone's backup, there is a hardware problem.

GTX 760 OC 2GB Fps drops and performance drops when reach 2GB

Hey after this problems with the GTX970, I decided to test my graphic card which I received from the RMA because the last one just gone, and when reach almost 2GB of ram used the performance drops a lot like in the 970, In games like Assetto Corsa I'm feeling this problem, sometimes I have drops from 60 fps to 20 fps ..
My model is the GTX 760 OC GAMING 2GB but the last which gone had the difference in the memory chip, using hynix memories instead of this new one which have Elpida.
Any idea?

Quote from: Nichrome on 01-February-15, 19:52:28
>>How to contact MSI.<<
I have a feeling that this last bits of vRAM on all cards is having this issue.... later I will test my gtx770 and will see if it also gets lower speeds
Hum ok. After that share with us that bench...

After I updated to ios5 my calendar did not bring in dates and when I began re-entering dates after one or two it froze up and after I got it going again it will not populate an end time on the same date and will not save the appointment as a consequence.

After I updated my Ipad2 to IOS5 my calendar lost all appointments. After re-entering a couple of appointments it froze. After getting it going again, the calendar will not populate an end date for the current day and consequently I can't save the appointment. Is this a common problem as I have just purchased this ipad and the calendar function is very important to me.

Hmm... It looks like they are gone forever now then. I can't think of any other way of getting them back apart from restoring from an iTunes or iCloud backup. Somebody else might be able to help but I think they're gone forever. I don't know why they were wiped from your iPod but it could be something to do with security. In the future I would recommend syncing to iTunes or iCloud to prevent it from happening again. You can always make a reservation at the Genius Bar and see what those guys can do because it seems that they are still there, they are just 'hidden' from view. http://concierge.apple.com/reservation/gb/en/techsupport/
Cheers,
Khal
P.S I'm sorry for the late reply

When I open a new tab, I would like it to open at the beginning of the tab line, not at the end - is this possible?

I would like new tabs to open at the beginning of the tab line - not near the end.

Hey please try this add on [https://addons.mozilla.org/en-US/firefox/addon/tab-control/ Tab Control]

Cycle / Loop Drops Notes when reaching end of loop

Similar Messages

Maybe you are looking for