Cycle sets in Counter plan

How is it possible to create two cycle sets in one plan. I create one counter plan with one cycle set and save. Plan no is generated. Then how can i create a second cycle set for same plan no as the system is designed for Internal numbering of plan.
Please explain me the real use of cycle set in multi counter plan. where it is used and when . for what purpose and steps on how to create two cycle sets for one multiple counter plan.
Thanks in advance
Murad shaikh

Hi ,
Check your config setting as given below
Plant Maintenance and Customer Service> Maintenance Plans, Work Centers, Task Lists and PRTs> Maintenance Plans> Configure Special Functions for Maintenance Planning.
The check box should be ticked.
This allows the maintenance of multiple cycle sets in one plan. Thus you can define different cycle sets, and thus cycles, for calculating the dates within a plan. You can use the assignment between cycle sets and the maintenance item to control that only certain maintenance items generate a call object for certain dates. In the simplest case, a cycle set such as A - B - A - B can be defined. "A" leads to a small inspection and "B" leads to a big inspection.
Also check below link
http://help.sap.com/saphelp_di471/helpdata/EN/c9/fccf28f79611d4961300a0c93029cf/content.htm

Similar Messages

  • Modify Cycle Set sequence based on counter outcome

    Dear Experts,
    I have a question with relation to multiple counter plan. We have a scenario where we have 3 cycles based on time and one based on counter. Now the requirement is, when the counter crosses a particular value - for example - if we consider failures - and the equipment fails 3 times, we have to restart the sequence from the beginning, or in other words, the day of performing maintenance based on counter should become the new Start date of the plan/ cycle set.
    Also the other thing is, the number of failures need not be regular - so we should not get any maintenance calls for the same.
    I tested different options in multiple counter plan, but I dont see a standard solution for the above scenario.
    Has any of you come across such scenarios? And do you have a solution?
    Regards,
    Veera

    Dear Pete,
    I have proposed the same solution to business - around the time I posted this query. I was about to leave, when I saw replies from you and Mahesh.
    Thanks. I am marking yours as the answer, as I feel that we don't have any other alternative.
    By the way, Mahesh, you are correct, we cannot maintain multiple time based and performance based alternatives in multiple counter plan. Also, the problem for prediction, is that the plan depends on annual estimate to give a call, and in practical circumstances, will not be able to predict the performance based counter unless it has daily entry.
    But what we can maintain is a sequence of activities on time or performance, based on the cycle set sequence.
    Regards,
    Veera

  • Multi counter plan schduling start date

    Dear Experts,
    Anyone can clarify the following points to provide proper support to client.
    1. we have created multi counter plan with cycle set contains of different target counter readings with logical condition OR.
    2. Now users are recording the counters via measuring documents.
    3. we are mannually scheduling the above M.Plan. System is deriving the order start date on its own. we want to know the basis behind deriving the order start date? userrs wants starting date on its own, can system will support with ant exit?
    4. what is the significance of annual estimate reading in the measuring point? how it help to derive the planned start date of M.Order?
    5. users also wants that, system should check measuring documents on its own while creating measuring documents and should result the order if it crosses the limit of the cycle set mentioned in the M.Plan. Is it possible to support the scenario?
    Thanks in Advance,
    Krishnamurthy

    Krishnamurthy,
    3) Do a manual call of the Maintenance plan, this would be the easiest way, instead of using exits
    4) For performance based MP,The [calculated planned date|http://help.sap.com/erp2005_ehp_04/helpdata/EN/3c/abb1ec413911d1893d0000e8323c4f/frameset.htm] depends on the counter reading at the time of planning, and the estimated annual performance that has been defined for the counter.Hence it is important that you enter measurement readings for the counter,e even-though the reading has not changed.
    5) With respect to your last question, That functionality is accomplished through Condition based maintenance functionality. You will have to use the user exit to generate a order when the reading falls outside pre-determined values.
    Regards
    Narasimhan

  • Problem with multiple counter plan containing running hrs and no of months

    Hey gurus,
    In my project the preventive maintenance of compressor is such that it is performed after 500 hrs or 6 months whichever comes first. Now i ve created a cycle set cosisting of 500 hrs and 6 months. In the multiple counter plan i ve assigned a counter to the plan for calculating 500 hrs and chosen the link as OR. I scheduled the plan and given the start date as 01.05.09. Now I am facing the following problem:
    Suppose my counter value reaches the 500 mark on 01.08.09. Now a maintenance order is generated. My client now wants that the next order should be generated after the counter reading reaches 1000 or the date reaches 01.02.10, ie, the order should be generated for next 500hrs or NEXT 6 MONTHS from
    the date of completion of first cycle, whichever comes first.
    Pls help....
    Regards,
    Abhishek

    Hi
    If u have scheduled ur plan according to cycle set. It will take the Point of contact as 6 months.
    OK
    Ex : Cycle set : 500 hrs and 6 months, maintained OR functions
    i have entered the measurement reading as 500.. thats why, it gives the call for todays date...
    see the next date will be after 6 months... If u update the measuring point only, it will open a order... otherwise.. once u have scheduled it for 6 months.. once in 6 months it will give a order...
    1     11.05.2009               0     New start  Save to call
    2     07.11.2009     07.11.2009          0     Scheduled  Hold
    3     06.05.2010     06.05.2010          0     Scheduled  Hold
    4     02.11.2010     02.11.2010          0     Scheduled  Hold
    5     01.05.2011     01.05.2011          0     Scheduled  Hold
    6     28.10.2011     28.10.2011          0     Scheduled  Hold
    7     25.04.2012     25.04.2012          0     Scheduled  Hold
    Schedule for a long period.. u will be able to understand the scenario...
    - Pithan

  • Multi-Counter Plan with multiple Equipments

    Hello,
    We would like to track maintenance costs at Equipment level.  In multi-counter maintenance plan, is there a way to enter multiple equipments in one mainteance plan?
    Thanks a lot,
    Venu

    Dear Venu,
    In multi counter plan, only one equipment may be assigned, as correctly observed. However, you may assign the same equipment with different task list, depending on the cycle set, so that maint order is generated with required operations applicable for that cycle.
    Eg: Cycle set 1   100Hrs/1month
                          2    500Hrs/3Month
                          3    1000Hrs/6 Month
    Create task lists as per above cycle sets and for each cycle set assign the same equipment, but with different task lists.
    This reduces the number of maintenance plans for a given equipment. This is particularly useful for vehicle management, where the running KM and time are the common counters.
    James Prabaharan

  • First time scheduling using IP30 for Multiple Counter plan

    Hi,
    I created a multiple counter plan with Cycle set as 6months/ 300 Operations.
    I intend to start the job early and updated the Planned Counter date as  1st Sep 2014.I maintained Lead Float as 10 days.
    When I run IP10, call is generated successfully. But when I execute IP30, no call is generated.
    We have not activated enhanced functionality of Multiple Counter plans.
    I checked all the parameters and everything seemd to be fine. In IP30, I checked the check boxes - Rescheduling & Immediate start of all.
    In the field, Interval for Call Objects, I ran with blank value, 30 days value. But in both the cases, call is not generated.
    I want to generate calls using IP30 only as there are lot of multiple counter plans. Can anybody suggest a solution to this issue?

    Hello
    As you intended to use cycle set functionality please activate enhanced functionality of Multiple Counter plans
    Br
    Rakesh

  • Cycle sets in Performance Based Preventive Maintenance

    Hi,
    Can any one explain what is cycle sets in Performance Based Preventive Maintenance means?
    Thanks in advance.

    hi
    Cycle sets are used for multiple counter plan where the unit of measurement is different .For example you have to plan your equipment based on KM it had serviced and also based on Months ,then you have to create cycle set for these 2 measurement like KM and Mon ,then while creating the multiple counter plan you can specify the cycle set and make the scheduling
    Also refer help.sap.com
    regards
    thyagarajan

  • Creating multi counter plan using LSMW

    Hi,
    I am trying to create multi counter plan (transaction IP43) using LSMW. I am using direct input object 0460 for creating it. Object has IBIPMPLA structure as header. How can i pass multi counter data in it ? Problem is line item level values like 'Maintenance cycle' (ZYKL1) are at header level structure IBIPMPLA.
    Anyone has cretaed multi counter using this object, please help me with it.
    Thanks,

    Hi,
    creating multi counter plan using LSMW
    Try this link,
    http://www.sapfans.com/forums/viewtopic.php?f=7&t=217834&p=1059434
    It will helps to you.
    Regards,
    Sekhar

  • Single cycle set , multiple cycle sets and counters

    Hi every one,
    i wanan know the use of single cycle set, multiple cycle set and counters. What kind of functionalilites can be covered by these fields specially in performance based planning and schedulling. Kindly give me some documentation on all three or some good example which can explain the scnerio clearly. Any help would be of great imprortance for me.
    Regards
    Abhishek Sinha

    Hi,
    This may help you
    http://help.sap.com/saphelp_46C/helpdata/EN/b0/df293581dc1f79e10000009b38f889/frameset.htm
    Regds
    Vinit

  • How to Set up Family Plan when you have two Apple IDs?

    I stopped short of setting up Family plan because my wife and I have two Apple IDs each: One for iTunes ad one for iCloud.  This was caused by migrating from long ago Apple "cloud" services.  
    The set up seems to assume you have a single ID for each person and there are no instructions to set it up using hyour current iTunesa and iCloud IDs.
    Has anyone successfully set up Family Plan while they have two sets of Apple IDs? 

    finally I found someone else with my dilemma.
    I have my iTunes/AppStore ID with all my purchases and my iCloud ID with everything else.
    this is a major issue that needs to be addressed.
    thank you.

  • Tcode for setting FI-SL planning: Summary table name

    can any body suggest Tcode for  for setting FI-SL planning: Summary table name.

    Hi,
    Check Tcode : GB01.
    CHECK THESE ALSO,
    GLPLINST.
    GLPLINSTALL.
    THANKS,
    REWARD IF HELPFUL.

  • Change start of cycle date in maintenance plan

    Dear Experts,
    We would like to change start of cycle date in maintenance plan. Iwe have rescheduled the plan but the start of cycle date remains the same.
    could you please confirm, whether it can be changed. The requirement is because of some Mt plan created with future start date in production (Year-2020) and we want to correct the same.
    Thanks

    Don,
    To determine the next maintenance call date you need to tell the system when the last maintenance call occured
    Example:
    You want the next call date on the 1 June based on a six month cycle. Therefore the last maintenance date would have been 1 January (assuming key date scheduling).
    In your case you need to RESTART your single-cycle plan on the 1 January and the system then calculates the next maintenance calls.
    PeteA

  • How to set Tile count column or count row?

    How to set Tile count column or count row? If not can do, How
    to adjust count row or count column?
    Thx for all idea.

    The Tile container's number of columns and rows is calculated
    based on each child's width and height (or based on tileWidth and
    tileHeight which you can set). If you need more control over the
    layout, use Grid.

  • Sales Planning, Head Count Planning & Financial planning--Basics

    Hi All,
    Can someone please help me to understand below mentioned topic in terms of SAP BPC:
    Sales planning:
    GeneralBusiness Rules
    Basic reports in Sales Planning
    Head Count Planning:
    General Business Rules
    Basic reports in Head Count Planning
    Financial Planning:
    General Business Rules
    Basic reports in Financial Planning
    Thanks,
    Red

    Hi Red,
    It is difficult to suggest anything on these topics. What you are asking is something on planning processes. No 2 company does the planning in the same way (though, they might belong to the same industry).
    It is important to understand the requirements. You might not even required any business rules for Sales and Headcount planning.
    It cannot be generalized. You need to understand the requirement, to assess whether you require any business rules or not. Every company has their own reporting requirements.
    Hope this helps.

  • Set image counter to 0

    hi,
    I have Nokia 3230 mobile phone, i'm going to remove all image from memory card and set image counter to 0, do you know how can i it do?

    Hi aghaghi
    You could try reset *#7370# after backing up essential data.
    Also you may need to reformat your memory card.
    Happy to have helped forum in a small way with a Support Ratio = 37.0

Maybe you are looking for

  • Confused between getting an APPLE TV or VGA cables...

    Hey Folks. Im not sure if I should get an APPLE TV or a VGA cable to connect my MacBook Pro to my LCD TV... what do you recommend. Im a heavy film buff, so I watch a lot of movies - with that said, APPLE TV seems like a good selection since I can pur

  • CAN I BURN MY MP3'S TO DVD & PLAY THEM ON CD MACHINE?

    My question is : Can i back up my itunes library to a dvd and then play the whole library on the dvd on an ordinary cd player? I would like to back up my MP3 library to a portable & playable format & am hoping that dvd's are essentially very big cd's

  • How does, Do Not Import Duplicates, work?

    Here's what I found in the user manual. (how about that, I read the manual before someone pointed it out to me) Aperture checks the filename of the master to determine if an image is a duplicate of one in the library. Aperture is checking the filenam

  • Polling table with Database Adapter

    Hi All, I have created a Database Adapter to poll the table for the new record or modified. I have added a receive activity to that Adapter and deployed. However the instance is not completing and its in always running state and waiting at receive ac

  • LMS 4.2 User Tracking for Avaya IP Handsets and Connected Devices

    I manage an environment that makes extensive use of Avaya IP phones and it's frustrating that this seems to limit the usefulness of the User Tracking application within LMS. We configure the switch (2960) ports connected to the handsets as dot1q trun